On Fri, 01 Mar 2013 16:49:56 -0500
"Bob Goodwin - Zuni, Virginia, USA" wrote:
>
> Section "Device"
> Identifier "Videocard0"
> Driver "ati"
>
> I wonder if the ati driver is appropriate. The processor is an AMD A8
> 3850 and the GPU is apparently integral to it.
On Fri, 01 Mar 2013 18:41:41 -0500
David wrote:
>
> You could use "system-config-display" to do this. But Fedora dropped
> it several releases ago.
Did you ever get well informed about *why* it was dropped? There was a
reason for that.
> And now is when you will get message after message choc
Allegedly, on or about 02 March 2013, Marko Vojinovic sent:
> or with a faulty VGA cable
Or, just so nobody is left in the lurch, an apparently not faulty brand
new cable, that simply hasn't got any wiring between the two pins that
carry the EDID signals. Some cheap cables only bother wire up th
Allegedly, on or about 01 March 2013, Craig White sent:
> I have had an occasion (granted just one) where I had a really
> large (4TB) LVM and added more drives to the system and created a new
> 'PV' but I joined them together as a single 'logical' volume. I
> believe that is what you are referring
On Sat, 02 Mar 2013 21:18:21 +1030
Tim wrote:
> Allegedly, on or about 02 March 2013, Marko Vojinovic sent:
> > or with a faulty VGA cable
>
> Or, just so nobody is left in the lurch, an apparently not faulty
> brand new cable, that simply hasn't got any wiring between the two
> pins that carry
On 03/02/2013 12:36 AM, poma wrote:
ls -l /sys/class/drm/
poma
[bobg@box10 ~]$ ls -l /sys/class/drm/
total 0
lrwxrwxrwx. 1 root root0 Mar 2 2013 card0 ->
../../devices/pci:00/:00:01.0/drm/card0
lrwxrwxrwx. 1 root root0 Mar 2 2013 card0-HDMI-A-1 ->
../../devices/pci:00/
On Wed, 2013-02-20 at 10:52 +, Gordan Bobic wrote:
> 3x3TB RAID5 is _brave_, IMO. But hey, it's your data. :)
So, are you saying there should be more drives in the array, or should
he use a different RAID level altogether?
Ranbir
--
Kanwar Ranbir Sandhu
Linux 3.7.9-101.fc17.x86_64 x86_64 GN
On Fri, 2013-03-01 at 08:57 -0600, Aaron Konstam wrote:
> The Check Updates option in the Software application does not work for
> me. It starts as expected reporting the number of updates. But it never
> reaches the install step and just keeps running without end.
>
> Does this work for other peo
Am 02.03.2013 15:27, schrieb Aaron Konstam:
> On Fri, 2013-03-01 at 08:57 -0600, Aaron Konstam wrote:
>> The Check Updates option in the Software application does not work for
>> me. It starts as expected reporting the number of updates. But it never
>> reaches the install step and just keeps run
On 03/02/13 13:32, Bob Goodwin - Zuni, Virginia, USA wrote:
> On 03/02/2013 12:36 AM, poma wrote:
>> ls -l /sys/class/drm/
>>
>> poma
> [bobg@box10 ~]$ ls -l /sys/class/drm/
> total 0
> lrwxrwxrwx. 1 root root0 Mar 2 2013 card0 ->
> ../../devices/pci:00/:00:01.0/drm/card0
> lrwxrwxrwx
On 03/02/2013 09:30 AM, Reindl Harald wrote:
Am 02.03.2013 15:27, schrieb Aaron Konstam:
On Fri, 2013-03-01 at 08:57 -0600, Aaron Konstam wrote:
The Check Updates option in the Software application does not work for
me. It starts as expected reporting the number of updates. But it never
reache
Am 02.03.2013 15:52, schrieb Temlakos:
> The best part of a GUI: when you want to know what packages are available,
> you don't lose the first listing just
> because it has scrolled above your command-line prompt (xterm, Konsole, etc.)
> window
jokingly?
"Konsole" knows scrolling and even sett
On 02/20/2013 12:40 PM, Reindl Harald wrote:
Am 20.02.2013 18:35, schrieb Tod Thomas:
I just completed upgrading a FC14 virtual machine running under virtual box and
it went pretty well. Now I am
trying to do the same upgrade only on a FC15 standalone machine to FC16. It
looks like it can't
Ok, old school here, Saturday morning hacking. What is the new method
for managing system services? Could someone point me to some good
documentation? The reason I ask is nothing is being written to
/var/log/messages and /etc/init.d/ doesn't seem to be a viable option
anymore. I tried:
/sbin
So, I have been trying to get sylfilter to compile and execute (since I
could not find a rpm in the fedora 18 repos).
The source code is available at:
http://sylpheed.sraoss.jp/sylfilter/
Anyway, I configure in the following way:
./configure --with-libsylph=builtin --enable-sqlite=yes
Then I
On 03/02/2013 04:24 AM, Marko Vojinovic wrote:
Well, first of all, you probably want to put "radeon" driver up there
instead of "ati".
Did that ...
Second, the data about your PCI hardware, including the graphics card,
is displayed by "lspci -v", which should confirm that you have an ATI
Radeo
On Sat, 2 Mar 2013 11:56:37 -0600, Ranjan Maitra wrote:
> So, I have been trying to get sylfilter to compile and execute (since I
> could not find a rpm in the fedora 18 repos).
>
> The source code is available at:
>
> http://sylpheed.sraoss.jp/sylfilter/
>
>
> Anyway, I configure in the follo
On 03/02/2013 04:24 AM, Marko Vojinovic wrote:
If it was a clean install, you should send us the content
of /var/log/Xorg.0.log file (it may be large, maybe put it in a pastebin
or something). This file can tell all the details about what is going
wrong with automatic resolution detection and EDI
Thanks!
I was able to get it to "work" (i.e. compile, etc) with the following:
./configure --with-libsylph=sylpheed --with-package=sylpheed
--enable-sqlite=yes --includedir=/usr/include/sylpheed
make
make install
I don't know how convenient it would be to make this into an rpm, but I
though
On 03/02/2013 01:40 PM, Bob Goodwin - Zuni, Virginia, USA wrote:
On 03/02/2013 04:24 AM, Marko Vojinovic wrote:
If it was a clean install, you should send us the content
of /var/log/Xorg.0.log file (it may be large, maybe put it in a pastebin
or something). This file can tell all the details abo
On 02.03.2013 16:22, Tod Thomas wrote:
> Ok, old school here, Saturday morning hacking. What is the new method
> for managing system services? Could someone point me to some good
> documentation? The reason I ask is nothing is being written to
> /var/log/messages and /etc/init.d/ doesn't seem to be
On 03/01/2013 12:48 PM, Bob Goodwin - Zuni, Virginia, USA wrote:
In a new Fedora-18/64 bit install in a new computer I am unable to set
the resolution above 1024x768 at 60HZ and would like to set it higher.
Just for grins, have you tried without any conf file at all? I don't
have one, and X a
On 03/02/2013 03:49 PM, Thomas Cameron wrote:
On 03/01/2013 12:48 PM, Bob Goodwin - Zuni, Virginia, USA wrote:
In a new Fedora-18/64 bit install in a new computer I am unable to set
the resolution above 1024x768 at 60HZ and would like to set it higher.
Just for grins, have you tried without a
Hello,
Thinking about the isntallation issues, I have 2 concerns:
First one.
What should be the size left over the 1st partition of the disk for
the MBR? I may not have enough size.
Is it documented?
Thank.
--
==
Patrick DUPRÉ
On Sat, Mar 02, 2013 at 10:20:21PM +0100, Patrick Dupre wrote:
> Hello,
>
> Thinking about the isntallation issues, I have 2 concerns:
> First one.
> What should be the size left over the 1st partition of the disk for
> the MBR? I may not have enough size.
> Is it documented?
MBR is pre-reserved
Am 02.03.2013 22:20, schrieb Patrick Dupre:
> Thinking about the isntallation issues, I have 2 concerns:
> First one.
> What should be the size left over the 1st partition of the disk for
> the MBR? I may not have enough size.
> Is it documented?
no installer since years starts with the fist par
Hello,
I was thinking in making a bootable USB key for the installation.
I read: http://fedoraproject.org/wiki/How_to_create_and_use_Live_USB
There is instruction about creating partitions and install the .iso on one
of them and make it bootable. The example is with a single partition:
su -c "liv
Quoting sam, 02 mar 2013 Fred Smith :
On Sat, Mar 02, 2013 at 10:20:21PM +0100, Patrick Dupre wrote:
Hello,
Thinking about the isntallation issues, I have 2 concerns:
First one.
What should be the size left over the 1st partition of the disk for
the MBR? I may not have enough size.
Is it docu
Am 02.03.2013 22:57, schrieb Patrick Dupre:
> If there is not enough room in front of the first partition, the MBR is not
> going to
> fit. I already had this glitch
this has NOTHING to to with the MBR
it is GRUB2 which is bloated like a OS itself
> For example:
> fdisk -l /dev/sda
> /dev/sda1
On 03/02/2013 01:57 PM, Patrick Dupre wrote:
fdisk -l /dev/sda
/dev/sda14096 6008309 3002107 82 Linux swap /
Solaris
gives enough room for the MBR, but
fdisk -l /dev/sdb
/dev/sdb1 6324981074124905067 HPFS/NTFS/exFAT
probably does not give me enoug
Am 02.03.2013 23:22, schrieb Joe Zeff:
> On 03/02/2013 01:57 PM, Patrick Dupre wrote:
>> fdisk -l /dev/sda
>> /dev/sda14096 6008309 3002107 82 Linux swap /
>> Solaris
>> gives enough room for the MBR, but
>>
>> fdisk -l /dev/sdb
>> /dev/sdb1 63249810741
On 03/02/2013 10:22 AM, Tod Thomas wrote:
> Ok, old school here, Saturday morning hacking. What is the new method
> for managing system services? Could someone point me to some good
> documentation? The reason I ask is nothing is being written to
> /var/log/messages and /etc/init.d/ doesn't seem to
On 03/02/2013 02:34 PM, G.Wolfe Woodbury wrote:
systemd provides a new command for some startup logging: journalctl
Just out of curiosity, I checked to see if that's active:
[root@khorlia joe]# systemctl status journalctl.service
journalctl.service
Loaded: error (Reason: No such file
Quoting sam, 02 mar 2013 Reindl Harald :
Am 02.03.2013 23:22, schrieb Joe Zeff:
On 03/02/2013 01:57 PM, Patrick Dupre wrote:
fdisk -l /dev/sda
/dev/sda14096 6008309 3002107 82 Linux swap /
Solaris
gives enough room for the MBR, but
fdisk -l /dev/sdb
/dev/sdb1
On 03/02/13 20:22, Ranjan Maitra wrote:
>
>
> Thanks!
>
> I was able to get it to "work" (i.e. compile, etc) with the following:
>
> ./configure --with-libsylph=sylpheed --with-package=sylpheed
> --enable-sqlite=yes --includedir=/usr/include/sylpheed
>
> make
>
> make install
>
> I don't kn
On 3-2-13 10:22:49 Tod Thomas wrote:
> Ok, old school here, Saturday morning hacking. What is the new method
> for managing system services?
That would be systemctl(1). See man systemctl.
> Could someone point me to some good
> documentation?
http://www.freedesktop.org/wiki/Software/syste
Hello,
What does make that when a user pluggin a usb key, it is automatically
mounted with his own rights while there is noting in the fstab?
How can I reproduce it manually?
Thank.
--
==
Patrick DUPRÉ
On 03/03/13 06:40, Joe Zeff wrote:
> On 03/02/2013 02:34 PM, G.Wolfe Woodbury wrote:
>> systemd provides a new command for some startup logging: journalctl
>
> Just out of curiosity, I checked to see if that's active:
>
> [root@khorlia joe]# systemctl status journalctl.service
> journalctl.service
On 03/02/2013 05:40 PM, Joe Zeff wrote:
On 03/02/2013 02:34 PM, G.Wolfe Woodbury wrote:
systemd provides a new command for some startup logging: journalctl
Just out of curiosity, I checked to see if that's active:
[root@khorlia joe]# systemctl status journalctl.service
journalctl.service
On 3-2-13 18:08:38 I wrote:
> Try this (probably as root unless you're in the adm group):
>
> journalctl --this-boot --full
Oh, it's been a while since I learned about the journal so I forgot to
mention that you can make its stuff persistent. You may be interested
in this:
http://0pointe
On 03/02/2013 03:30 PM, Patrick Dupre wrote:
What does make that when a user pluggin a usb key, it is automatically
mounted with his own rights while there is noting in the fstab?
How can I reproduce it manually?
In Xfce, there's a control panel for Removable Drives and Media where
you can set
On Sat, 2013-03-02 at 16:12 -0800, Joe Zeff wrote:
> On 03/02/2013 03:30 PM, Patrick Dupre wrote:
> > What does make that when a user pluggin a usb key, it is automatically
> > mounted with his own rights while there is noting in the fstab?
> > How can I reproduce it manually?
>
> In Xfce, there's
On 03/02/2013 03:45 PM, Ed Greshko wrote:
man journalctl
Thanx; that hadn't occurred to me. Checking, I find that it depends on
syslog.socket.service, which also failed. I'll start a new thread for
that because I don't think it's related to the OP's question.
--
users mailing list
users@li
On 03/02/2013 03:52 PM, Tod Thomas wrote:
On 03/02/2013 05:40 PM, Joe Zeff wrote:
On 03/02/2013 02:34 PM, G.Wolfe Woodbury wrote:
systemd provides a new command for some startup logging: journalctl
Just out of curiosity, I checked to see if that's active:
[root@khorlia joe]# systemctl status
On 03/03/13 08:22, Joe Zeff wrote:
> On 03/02/2013 03:45 PM, Ed Greshko wrote:
>> man journalctl
>
> Thanx; that hadn't occurred to me. Checking, I find that it depends on
> syslog.socket.service, which also failed. I'll start a new thread for that
> because I don't think it's related to the OP
Still trying to discover the cause of errors being generated when
grub2-mkconfig is run.
Tne problem first surfaced after a new kernel during a recent update on
Fedora 18. The error was something along the lines of "can't find a
usable template" .
So I tried to manually generate a grub.cfg file
On 03/02/2013 04:31 PM, Ed Greshko wrote:
On 03/03/13 08:22, Joe Zeff wrote:
On 03/02/2013 03:45 PM, Ed Greshko wrote:
man journalctl
Thanx; that hadn't occurred to me. Checking, I find that it depends on
syslog.socket.service, which also failed. I'll start a new thread for that
because I
On 3-2-13 14:40:39 Joe Zeff wrote:
> On 03/02/2013 02:34 PM, G.Wolfe Woodbury wrote:
> > systemd provides a new command for some startup logging: journalctl
>
> Just out of curiosity, I checked to see if that's active:
>
> [root@khorlia joe]# systemctl status journalctl.service
> journalctl.servi
Am 03.03.2013 01:37, schrieb Joe Zeff:
> On 03/02/2013 04:31 PM, Ed Greshko wrote:
>> On 03/03/13 08:22, Joe Zeff wrote:
>>> On 03/02/2013 03:45 PM, Ed Greshko wrote:
man journalctl
>>>
>>> Thanx; that hadn't occurred to me. Checking, I find that it depends on
>>> syslog.socket.service, wh
On 03/03/13 08:37, Joe Zeff wrote:
> On 03/02/2013 04:31 PM, Ed Greshko wrote:
>> On 03/03/13 08:22, Joe Zeff wrote:
>>> On 03/02/2013 03:45 PM, Ed Greshko wrote:
man journalctl
>>>
>>> Thanx; that hadn't occurred to me. Checking, I find that it depends on
>>> syslog.socket.service, which al
Hello,
I was thinking in making a bootable USB key for the installation.
I read: http://fedoraproject.org/wiki/How_to_create_and_use_Live_USB
There is instruction about creating partitions and install the .iso on one
of them and make it bootable. The example is with a single partition:
su -c "liv
On Sun, 3 Mar 2013 00:01:06 +0100 poma
wrote:
> On 03/02/13 20:22, Ranjan Maitra wrote:
> >
> >
> > Thanks!
> >
> > I was able to get it to "work" (i.e. compile, etc) with the following:
> >
> > ./configure --with-libsylph=sylpheed --with-package=sylpheed
> > --enable-sqlite=yes --includedir
On 03/03/13 08:56, Patrick Dupre wrote:
> Hello,
>
> I was thinking in making a bootable USB key for the installation.
> I read: http://fedoraproject.org/wiki/How_to_create_and_use_Live_USB
> There is instruction about creating partitions and install the .iso on one
> of them and make it bootable.
Christopher Meng wrote:
Hi all,
Recently I'm stucked with multiboot.
I have a disk with following partition:
sd1. 157GB NTFS of Win8
sd2. 55GB including:
sd5. 500M /boot
sd6. 4GB /swap
sd7. 50GB BTRFS Fedora 18
sd3.55GB not parted
sd4.32GB not
Frank McCormick wrote:
Still trying to discover the cause of errors being generated when grub2-mkconfig
is run.
Tne problem first surfaced after a new kernel during a recent update on Fedora
18. The error was something along the lines of "can't find a usable template" .
So I tried to manually gen
Patrick O'Callaghan wrote:
On Sat, 2013-03-02 at 16:12 -0800, Joe Zeff wrote:
On 03/02/2013 03:30 PM, Patrick Dupre wrote:
What does make that when a user pluggin a usb key, it is automatically
mounted with his own rights while there is noting in the fstab?
How can I reproduce it manually?
In
Patrick Dupre wrote:
Hello,
I was thinking in making a bootable USB key for the installation.
I read: http://fedoraproject.org/wiki/How_to_create_and_use_Live_USB
There is instruction about creating partitions and install the .iso on one
of them and make it bootable. The example is with a single
Thanks.
In fact my root confusion is f18's anaconda... I don't know how to part
when I faced it.
Now I use f17 anaconda and everything seems ok.
Thanks all very much!
在 2013-3-3 AM9:26，"Bill Davidsen" 写道：
> Christopher Meng wrote:
>
>> Hi all,
>>
>> Recently I'm stucked with multiboot.
>>
>> I
Are you trying to install a separate Fedora on your USB key or something
others?
在 2013-3-3 AM9:07，"Ed Greshko" 写道：
> On 03/03/13 08:56, Patrick Dupre wrote:
> > Hello,
> >
> > I was thinking in making a bootable USB key for the installation.
> > I read: http://fedoraproject.org/wiki/How_to_create
On 03/03/13 13:43, Christopher Meng wrote:
> Are you trying to install a separate Fedora on your USB key or something
> others?
Please respond to the OP's post, and please refrain from Top Posting
http://fedoraproject.org/wiki/Mailing_list_guidelines#Proper_posting_style
--
From now on, a
On 03/03/13 02:00, Ranjan Maitra wrote:
> On Sun, 3 Mar 2013 00:01:06 +0100 poma
> wrote:
>
>> On 03/02/13 20:22, Ranjan Maitra wrote:
>>>
>>>
>>> Thanks!
>>>
>>> I was able to get it to "work" (i.e. compile, etc) with the following:
>>>
>>> ./configure --with-libsylph=sylpheed --with-package=sy
Allegedly, on or about 02 March 2013, Temlakos sent:
> None of those GUI extenders issues commands like "yum clean metadata."
> So when I want to run an update on my own schedule, I issue that command
> first.
I've rarely ever had to do such a thing, and I certainly wouldn't bother
doing each ti
On Sun, 3 Mar 2013 07:17:10 +0100 poma
wrote:
> On 03/03/13 02:00, Ranjan Maitra wrote:
> > On Sun, 3 Mar 2013 00:01:06 +0100 poma
> > wrote:
> >
> >> On 03/02/13 20:22, Ranjan Maitra wrote:
> >>>
> >>>
> >>> Thanks!
> >>>
> >>> I was able to get it to "work" (i.e. compile, etc) with the follo
On 03/03/13 07:41, Ranjan Maitra wrote:
> On Sun, 3 Mar 2013 07:17:10 +0100 poma
> wrote:
>
>> On 03/03/13 02:00, Ranjan Maitra wrote:
>>> On Sun, 3 Mar 2013 00:01:06 +0100 poma
>>> wrote:
>>>
On 03/02/13 20:22, Ranjan Maitra wrote:
>
>
> Thanks!
>
> I was able to get i
64 matches
Mail list logo
