On Friday 23 November 2012 19:39:23 Jim wrote:
> I have a Asus 1000 that came with Linux on it , it had 32gb SSD I
> upgraded it to 64gb SSD.
> I use mine more than I use my Laptop or PC and I have upgraded it with
> Fedora since F10. And it is the reason I won't buy a Tablet.
> The Mini's are chea
Allegedly, on or about 25 November 2012, Robert Moskowitz sent:
> It was quite a pain getting to this point as the ee701 has a narrow
> screen and you cannont move the screens in install to see what is off
> the bottom of the screen. You just have to guess
I haven't tried this in the insta
Allegedly, on or about 25 November 2012, Alex sent:
> The HDMI that is connected to the HDTV is in another room. The
> intention was to run a 30' HDMI cable and a 30' USB cable for another
> wireless USB keyboard to the other room, so I could access my PC from
> that other room.
Are you testing u
A curious topic, indeed. I am wont to consider the /bigger picture/ (heh
heh, uh pun, intended?)...
E.G. does this mean then that so-called broadband providers must maintain
some permutation of "repeaters" , or signal amplifiers? Remember
telephone-poles. Uh... been a while since light outs
2012/11/26, Robert Moskowitz :
> I did the minimal install on my ee701. At least the first attempt.
>
> I set my swap at 768Mb, and left /boot at 500Mb (probably could shrink
> this next time). This left 2.7Gb for /
I'm not sure having a swap partition on a 4G SSD is a good idea.
Upgrading RAM i
On 11/26/2012 06:15 AM, Tim wrote:
Allegedly, on or about 25 November 2012, Robert Moskowitz sent:
It was quite a pain getting to this point as the ee701 has a narrow
screen and you cannont move the screens in install to see what is off
the bottom of the screen. You just have to guess
I h
On 11/26/2012 07:08 AM, Andras Simon wrote:
2012/11/26, Robert Moskowitz :
I did the minimal install on my ee701. At least the first attempt.
I set my swap at 768Mb, and left /boot at 500Mb (probably could shrink
this next time). This left 2.7Gb for /
I'm not sure having a swap partition on
2012/11/26, Robert Moskowitz :
>
> On 11/26/2012 07:08 AM, Andras Simon wrote:
[...]
>>> It was quite a pain getting to this point as the ee701 has a narrow
>>> screen and you cannont move the screens in install to see what is off
>>> the bottom of the screen. You just have to guess
>> Or sw
What do you see after executing startx command?
On 26/11/2012, Robert Moskowitz wrote:
> I remembered that on a non-graphical system (actually I did a graphical
> install, but changed the runlevel to 3) was just to type in:
>
> init 5
>
> So I tried it and things seem to just hang. So I rebooted
Linus is watching you.
Best,
Christopher Svanefalk
mob: +46762628251
skype: csvanefalk
On Mon, Nov 26, 2012 at 7:59 AM, JD wrote:
>
> On 11/25/2012 11:46 PM, Robert Moskowitz wrote:
>
>>
>> On 11/26/2012 01:11 AM, JD wrote:
>>
>>>
>>> I was building kernel 3.7-0.rc6.git.fc19 and during the b
2012/11/26 Christopher Svanefalk
> Linus is watching you.
>
> Best,
>
> Christopher Svanefalk
> mob: +46762628251
> skype: csvanefalk
>
>
>
> On Mon, Nov 26, 2012 at 7:59 AM, JD wrote:
>
>>
>> On 11/25/2012 11:46 PM, Robert Moskowitz wrote:
>>
>>>
>>> On 11/26/2012 01:11 AM, JD wrote:
>>>
>
On Mon, Nov 26, 2012 at 00:20:02 -0700,
JD wrote:
Is this normal for the kswapd to consume 50% of cpu?
And why would it do that?
This is the first time I have seen this.
Kernel is kernel-3.6.6-1.fc16
24 root 20 0 000 R 50.1 0.0 117:08.40 kswapd0
There have been problem
I have just done an installation of fc17 on a machine which was previously
running 16 with no problems.
I actually replaced the disk on which the root file system was installed,
so I still have the fc16 root system installed and am able to boot from it
to make comparisons, etc. I have tried rebo
Is there a way/command that will find all instances of files such as
"*.ncd" on the external hard drive:
/run/media/bobg/Simple/Box8BkU/
updatedb and locate with it mounted do not find anything? Often
times it would be convenient to do but locate seems only to want to
work
2012/11/26 Bob Goodwin - Zuni, Virginia, USA
>
>Is there a way/command that will find all instances of files such as
>"*.ncd" on the external hard drive:
>
>/run/media/bobg/Simple/**Box8BkU/
>
>updatedb and locate with it mounted do not find anything? Often
>times it would
I've never really gotten my head clear around the concept of a
path. What am I doing wrong here? How & where do I fix it? And how did I
get into this?
--
Beartooth Staffwright, Neo-Redneck Not Quite Clueless Power User
I have precious (very precious!) little idea where up is.
--
user
On 26/11/12 09:07, Alchemist wrote:
find /run/media/bobg/Simple/Box8BkU -name *.ncd -ls
Thank you, looks like just what I needed and works for me!
Bob
--
http://www.qrz.com/db/W2BOD
box7
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options
On 11/26/2012 10:11 PM, Beartooth wrote:
> I've never really gotten my head clear around the concept of a
> path. What am I doing wrong here? How & where do I fix it? And how did I
> get into this?
>
Ahhh, what? Did you forget to add more detail?
--
Programming today is a race between
On Mon, Nov 26, 2012 at 12:40:32AM -0500, Robert Moskowitz wrote:
> I remembered that on a non-graphical system (actually I did a graphical
> install, but changed the runlevel to 3) was just to type in:
>
> init 5
>
> So I tried it and things seem to just hang. So I rebooted. Probably
> need t
I would like to know how to loadbalance in Fedora17, and what kind of program I
need to use, I have 3 Ethernets and one LAN
Thanks
--
Francisco J. Peñaranda F.
Jefe de Sistemas
Ministerio de Comunicación
Teléfono : 22004 3 0
Email: francisco.penara...@comunicacion.gob.bo
webpage: www.co
Bob Goodwin:
> Is there a way/command that will find all instances of files such as
> "*.ncd" on the external hard drive:
>
> /run/media/bobg/Simple/Box8BkU/
>
> updatedb and locate with it mounted do not find anything? Often
> times it would be convenient to do but locate seems only to want to
>
2012/11/26 Francisco J. Penaranda
> I would like to know how to loadbalance in Fedora17, and what kind of
> program I need to use, I have 3 Ethernets and one LAN
>
> Thanks
>
> --
> Francisco J. Peñaranda F.
> *Jefe de Sistemas*
> *Ministerio de Comunicación*
> *Teléfono:* 2200430
> *Email:* fran
Allegedly, on or about 26 November 2012, Corey Fedoravic waxed lyrical:
> does this mean then that so-called broadband providers must maintain
> some permutation of "repeaters" , or signal amplifiers?
It's a basic part of wired communication. There's a line length limit,
where you need to put amp
On Mon, 26 Nov 2012 22:26:53 +0800, Ed Greshko wrote:
> On 11/26/2012 10:11 PM, Beartooth wrote:
>> I've never really gotten my head clear around the concept of a
>> path. What am I doing wrong here? How & where do I fix it? And how did
>> I get into this?
>>
>>
> Ahhh, what? Did you forget
--- Em seg, 26/11/12, Beartooth escreveu:
> De: Beartooth
> Assunto: Re: F17 yum not updating
> Para: users@lists.fedoraproject.org
> Data: Segunda-feira, 26 de Novembro de 2012, 14:14
> On Mon, 26 Nov 2012 22:26:53 +0800,
> Ed Greshko wrote:
>
> > On 11/26/2012 10:11 PM, Beartooth wrote:
> >
Allegedly, on or about 26 November 2012, Beartooth sent:
>
> [root@localhost ~]# yum update
> Loaded plugins: aliases, changelog, downloadonly, fastestmirror,
> : presto, refresh-packagekit, security, tmprepo, verify,
> : versionlock
> Loading mirror speeds from cached
On 11/26/2012 06:33 AM, Bruno Wolff III wrote:
On Mon, Nov 26, 2012 at 00:20:02 -0700,
JD wrote:
Is this normal for the kswapd to consume 50% of cpu?
And why would it do that?
This is the first time I have seen this.
Kernel is kernel-3.6.6-1.fc16
24 root 20 0 000 R 50.1
On Mon, 26 Nov 2012 08:56:04 -0800, Sergio wrote:
> Try this:
> yum update --disableplugin=fastestmirror
Response looks the same to me :
[root@localhost ~]# yum update --disableplugin=fastestmirror
Loaded plugins: aliases, changelog, downloadonly, presto, refresh-
: packag
2012/11/26 Beartooth
> On Mon, 26 Nov 2012 08:56:04 -0800, Sergio wrote:
>
> > Try this:
> > yum update --disableplugin=fastestmirror
>
> Response looks the same to me :
>
> [root@localhost ~]# yum update --disableplugin=fastestmirror
> Loaded plugins: aliases, changelog, downloadonly, pr
When I try to print double sided to this printer I get a single page
reading:
ERROR NAME;
stackunderflow
COMMAND;
pop
OPERAND STACK;
I almost always see this when printing anything double sided from
Firefox or from Acroread, but not when printing fr
On 11/26/2012 12:48 PM, Jonathan Ryshpan wrote:
> When I try to print double sided to this printer I get a single page
> reading:
>
> ERROR NAME;
> stackunderflow
> COMMAND;
> pop
> OPERAND STACK;
>
> I almost always see this when printing anything
On Mon, Nov 26, 2012 at 12:57:20PM -0500, Digimer wrote:
> On 11/26/2012 12:48 PM, Jonathan Ryshpan wrote:
> > When I try to print double sided to this printer I get a single page
> > reading:
> >
> > ERROR NAME;
> > stackunderflow
> > COMMAND;
> > pop
> >
On Mon, 2012-11-26 at 09:48 -0800, Jonathan Ryshpan wrote:
> When I try to print double sided to this printer I get a single page
> reading:
>
> ERROR NAME;
> stackunderflow
> COMMAND;
> pop
> OPERAND STACK;
>
> I almost always see this when printin
On Mon, 2012-11-26 at 13:22 -0500, fred smith wrote:
> On Mon, Nov 26, 2012 at 12:57:20PM -0500, Digimer wrote:
> > On 11/26/2012 12:48 PM, Jonathan Ryshpan wrote:
> > > When I try to print double sided to this printer I get a single page
> > > reading:
> > >
> > > ERROR NAME;
> > >
On Mon, Nov 26, 2012 at 10:19:05 -0700,
JD wrote:
This is why I decided to download source of kernel 3.7.0-rc6.git from
fc19 and build it on my fc16, in the hopes of a better kernel. But
no it has the kswap bug eating 50% of cpu.
So was this happening with both 3.7 and 3.6 kernels? Th
On 11/26/2012 12:01 PM, Bruno Wolff III wrote:
On Mon, Nov 26, 2012 at 10:19:05 -0700,
JD wrote:
This is why I decided to download source of kernel 3.7.0-rc6.git from
fc19 and build it on my fc16, in the hopes of a better kernel. But
no it has the kswap bug eating 50% of cpu.
So was
On Mon, Nov 26, 2012 at 12:19:11 -0700,
JD wrote:
The 50% cpu consumption by kswapd appeared first in 3.7
Thanks for that clarification.
It looks like there may be multiple things causing similar problems here.
3.7-rc7 should have another patch to help this, but there are still some
patch
On Mon, Nov 26, 2012 at 12:19:11 -0700,
JD wrote:
The Read/Write failures started in 3.6.X kernels, but do not appear in 3.7.
3.7 is doing the right thing by first issuing a hard reset to the sleeping
drives before reading or committing the journals. 3.6.X was not sending any
hard resets to
I can't mount this nfs server:
[root@box7 ~]# mount 192.168.1.8:/home/bobg/NFSdata /mnt/SRVR1
mount.nfs: access denied by server while mounting
192.168.1.8:/home/bobg/NFSdata
What are the likely problems? It's not a firewall. I've changed a few
permissions to no avail. Run out of idea
On 11/26/2012 10:03 PM, Bob Goodwin - Zuni, Virginia, USA wrote:
>updatedb and locate with it mounted do not find anything? Often
>times it would be convenient to do but locate seems only to want to
>work on the internal drives [for me].
Using the find command was a good answer.
But
On 11/27/2012 05:01 AM, Bob Goodwin - Zuni, Virginia, USA wrote:
>
> I can't mount this nfs server:
>
>[root@box7 ~]# mount 192.168.1.8:/home/bobg/NFSdata /mnt/SRVR1
>mount.nfs: access denied by server while mounting
>192.168.1.8:/home/bobg/NFSdata
>
> What are the likely problems? It's
On Mon, 2012-11-26 at 16:01 -0500, Bob Goodwin - Zuni, Virginia, USA
wrote:
> I can't mount this nfs server:
>
> [root@box7 ~]# mount 192.168.1.8:/home/bobg/NFSdata /mnt/SRVR1
> mount.nfs: access denied by server while mounting
> 192.168.1.8:/home/bobg/NFSdata
>
> What are the likely
On 11/26/2012 01:11 PM, Bruno Wolff III wrote:
On Mon, Nov 26, 2012 at 12:19:11 -0700,
JD wrote:
The Read/Write failures started in 3.6.X kernels, but do not appear
in 3.7.
3.7 is doing the right thing by first issuing a hard reset to the
sleeping
drives before reading or committing the
+ '[' '!' -f
/home/jd/rpmbuild/SOURCES/linux-2.6-makefile-after_link.patch ']'
ERROR: Patch linux-2.6-makefile-after_link.patch not listed as a
source patch in specfile
error: Bad exit status from /var/tmp/rpm-tmp.2pUmw7 (%prep)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.2pUm
On 11/26/2012 05:29 PM, JD wrote:
+ '[' '!' -f
/home/jd/rpmbuild/SOURCES/linux-2.6-makefile-after_link.patch ']'
ERROR: Patch linux-2.6-makefile-after_link.patch not listed as a
source patch in specfile
error: Bad exit status from /var/tmp/rpm-tmp.2pUmw7 (%prep)
RPM build errors:
Bad ex
On Mon, 2012-11-26 at 17:59 -0700, JD wrote:
> On 11/26/2012 05:29 PM, JD wrote:
> > + '[' '!' -f
> > /home/jd/rpmbuild/SOURCES/linux-2.6-makefile-after_link.patch ']'
> > ERROR: Patch linux-2.6-makefile-after_link.patch not listed as a
> > source patch in specfile
> > error: Bad exit status fr
On Mon, Nov 26, 2012 at 10:51:18AM -0800, Jonathan Ryshpan wrote:
> On Mon, 2012-11-26 at 13:22 -0500, fred smith wrote:
> > On Mon, Nov 26, 2012 at 12:57:20PM -0500, Digimer wrote:
> > > On 11/26/2012 12:48 PM, Jonathan Ryshpan wrote:
> > > > When I try to print double sided to this printer I get
On 11/26/2012 08:23 AM, Andras Simon wrote:
2012/11/26, Robert Moskowitz :
On 11/26/2012 07:08 AM, Andras Simon wrote:
[...]
It was quite a pain getting to this point as the ee701 has a narrow
screen and you cannont move the screens in install to see what is off
the bottom of the screen. Yo
On 11/26/2012 08:28 AM, Hiisi wrote:
What do you see after executing startx command?
Ah, startx. well I don't think it was installed as I typed in start and
hit the tab and nothing completed. I have since done a reinstall and
figured out how to 'properly' get gnome installed.
On 26/11/
On 11/26/2012 01:59 AM, JD wrote:
On 11/25/2012 11:46 PM, Robert Moskowitz wrote:
On 11/26/2012 01:11 AM, JD wrote:
I was building kernel 3.7-0.rc6.git.fc19 and during the build
I saw this:
Generating a 4096 bit RSA private key
Only 4096 Is that strong enough Shouldn't it be 819
On Mon, 2012-11-26 at 22:03 -0500, Robert Moskowitz wrote:
> I deselected everything I could and DID get gnome installed with 320Mb
> left open. But this is not enough to get VLC installed to view an mp4
> file. Can't figure out how to get Totem to view an mp4.
Totem makes use of the gstreamer c
51 matches
Mail list logo
