Hi guys.
I think I read on Phoronix about Poly Studio webcams being
supported by LVFS but searching through there I failed to
find any specific which would confirm that.
Does anybody here use Poly Studio P5 - or any webcam for
that matter - which can confirm is LVFS-supported?
btw. https
Thank you for your helpful and detailed advice. I really appreciate it, Tim!
Paul
On Wed, Jan 15, 2025 at 2:14 AM Tim via users
wrote:
>
> On Tue, 2025-01-14 at 14:45 +, Paul Smith wrote:
> > Surprisingly, by connecting the web-camera to a different usb port,
> > the issue has been fixed.
>
On Tue, 2025-01-14 at 14:45 +, Paul Smith wrote:
> Surprisingly, by connecting the web-camera to a different usb port,
> the issue has been fixed.
That could be inadequate power available to that port (bunches of
USB sockets are grouped together, and they have a cumulative total that
they can
On Tue, Jan 14, 2025 at 4:48 PM Patrick O'Callaghan
wrote:
>
> > Surprisingly, by connecting the web-camera to a different usb port,
> > the issue has been fixed.
>
> Dodgy connection?
Probably, Patrick!
Paul
--
___
users mailing list -- users@lists.f
On Tue, 2025-01-14 at 14:45 +, Paul Smith wrote:
> Surprisingly, by connecting the web-camera to a different usb port,
> the issue has been fixed.
>
Dodgy connection?
poc
--
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe se
04CA:707A.0329:
> hiddev96,hidraw1: USB HID v1.11 Device [Generic EasyCamera 5M] on
> usb-:01:00.0-8/input2
> Jan 14 14:05:54 localhost kernel: usb 1-8: Product: EasyCamera 5M
> Jan 14 14:05:54 localhost kernel: usb 1-8: Found UVC 1.00 device
> EasyCamera 5M (04ca:707a
:08 PM Paul Smith wrote:
>
> Dear All,
>
> I am encountering an issue with my webcam: it intermittently turns off
> and on when in use.
>
> Has anyone experienced a similar problem or can suggest a solution?
>
> Thank you in advance for your assistance!
Dear All,
I am encountering an issue with my webcam: it intermittently turns off
and on when in use.
Has anyone experienced a similar problem or can suggest a solution?
Thank you in advance for your assistance!
Best regards,
Paul
--
___
users
Thanks to all for your help. I have plug the webcam in a USB port
behind the computer and the drawing tablet in the front of the
computer, and now the two devices can work when both connected to the
computer. Before, both were plugged in the front of the computer, in
USB ports side by side.
I
Does your computer have more than one USB chain, so you can see if the
problem follows the USB bus or the device(s)?
On Fri, Apr 15, 2022 at 12:15 PM Paul Smith wrote:
>
> Dear All,
>
> When I plug in my drawing tablet, my webcam does not work; when I
> unplug the drawing tab
On Fri, Apr 15, 2022 at 12:15 PM Paul Smith wrote:
> When I plug in my drawing tablet, my webcam does not work; when I
> unplug the drawing tablet, the webcam starts to work.
>
> Both devices use USB to connect to the computer.
>
> Could you please direct me in the right directi
On Fri, 2022-04-15 at 17:15 +0100, Paul Smith wrote:
> Dear All,
>
> When I plug in my drawing tablet, my webcam does not work; when I
> unplug the drawing tablet, the webcam starts to work.
>
> Both devices use USB to connect to the computer.
>
> Could you pleas
Dear All,
When I plug in my drawing tablet, my webcam does not work; when I
unplug the drawing tablet, the webcam starts to work.
Both devices use USB to connect to the computer.
Could you please direct me in the right direction to the cause of the problem?
Thanks in advance,
Paul
On Thu, 23 Dec 2021 at 23:14, Tim via users
wrote:
> Tom Horsley
> >> I have a system at home in which almost all the USB ports stopped
> >> working, so maybe it isn't the camera. You might want to try every
> >> USB port and see if one works.
>
> Jonathan Ryshpan:
> > A very good suggestion. I
Tom Horsley
>> I have a system at home in which almost all the USB ports stopped
>> working, so maybe it isn't the camera. You might want to try every
>> USB port and see if one works.
Jonathan Ryshpan:
> A very good suggestion. I switched the camera with a bluetooth
> dongle: the dongle works on
On Thu, 2021-12-23 at 18:32 -0500, Tom Horsley wrote:
> On Thu, 23 Dec 2021 15:10:38 -0800
> Jonathan Ryshpan wrote:
>
> > I have an HD Pro Webcam C920 which has stopped working on my main
> > system
>
> I have a system at home in which almost all the USB ports sto
On Thu, 23 Dec 2021 15:10:38 -0800
Jonathan Ryshpan wrote:
> I have an HD Pro Webcam C920 which has stopped working on my main
> system
I have a system at home in which almost all the USB ports stopped
working, so maybe it isn't the camera. You might want to try every
USB port and
I have an HD Pro Webcam C920 which has stopped working on my main
system (amito), which doesn't recognize it and disconnects. I have
another system (oaklandweather), which does recognize it and remains
connected. Attached are the relevant extracts from the two system
logs, starting at the
24, 2021 at 11:12 PM
From: "Patrick Dupre"
To: users@lists.fedoraproject.org
Subject: Re: webcam
v4l2-ctl --list-devices
Cannot open device /dev/video0, exiting.
It looks like that I cannot turn the camera on (it is an internal camera).
fn+f6 does not do any thing.
The worst is
On Wed, 2021-11-24 at 22:12 +0100, Patrick Dupre wrote:
> v4l2-ctl --list-devices
> Cannot open device /dev/video0, exiting.
>
> It looks like that I cannot turn the camera on (it is an internal
> camera).
> fn+f6 does not do any thing.
> The worst is that this camera has been workig in the past!
On 11/24/21 11:10, Patrick Dupre wrote:
I am trying to have my camera working on my laptop
The driver seem OK
but cheese says "no device found"
Run "journalctl -b" and see what you can find when it gets initialized.
Clearly it gets detected, but at some point it seems to go away since
it's n
, November 24, 2021 at 10:42 PM
From: "John Westerdale"
To: rogerhef...@gmail.com
Cc: "Community support for Fedora users"
Subject: Re: webcam
Here is a traditional favorite for enumerating Video devices:
[jwesterd@jwesterd-f33 Citrix]$ v4l2-ctl --list-devices
Live!
Foundation 2.0 root hub
> >
> >
> >
> ===
> > Patrick DUPRÉ | | email: pdu...@gmx.com
> > Laboratoire interdisciplinaire Carnot de Bourgogne
> >
==
> Patrick DUPRÉ | | email: pdu...@gmx.com
> Laboratoire interdisciplinaire Carnot de Bourgogne
> 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
> Tel: +33 (0)380395988| | Room# D114A
> ===
(0)380395988| | Room# D114A
===
> Sent: Wednesday, November 24, 2021 at 9:10 PM
> From: "Patrick Dupre"
> To: "fedora"
> Subject: webcam
>
> Hello,
>
> I am t
On Wed, 24 Nov 2021 20:10:28 +0100
Patrick Dupre wrote:
> What am I missing?
Possibly your user needs to be a member of the "video" group?
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedorapr
Hello,
I am trying to have my camera working on my laptop
The driver seem OK
but cheese says "no device found"
What am I missing?
lsmod|grep video
uvcvideo 122880 0
videobuf2_vmalloc 20480 1 uvcvideo
videobuf2_memops 20480 1 videobuf2_vmalloc
videobuf2_v4l2 368
Dear All,
After having upgraded from F33 to F34, my webcam was still detected by
OBS-Studio. However, it did not display any image -- only a black
rectangle.
It took me a lot of time to find out the cause: The resolution of my
webcam on OBS-Studio was configured as
"Leave unchanged&quo
I am running a fully updated F34 on x86_64 hardware. I have a Logitech
QuickCam Pro 9000 web cam (webcam +
microphone). I can view the video stream with cheese. I can view the video
stream with mplayer. When I start zoom, I
can get no video.
zoom version 5.6.16888.0424-1
heese version 2
On Fri, Mar 12, 2021 at 12:27 AM Ed Greshko wrote:
>
> >> You might try uvcdynctl that is what I have been using as it directly
> >> talks to the webcam.
> >>
> >> It will show the controls that exist and let you query and set them.
> >>
>
On 12/03/2021 08:18, Roger Heflin wrote:
On Thu, Mar 11, 2021 at 6:03 PM Roger Heflin wrote:
You might try uvcdynctl that is what I have been using as it directly
talks to the webcam.
It will show the controls that exist and let you query and set them.
uvcdynctrl that is.
FWIW
On Thu, Mar 11, 2021 at 6:03 PM Roger Heflin wrote:
>
> You might try uvcdynctl that is what I have been using as it directly
> talks to the webcam.
>
> It will show the controls that exist and let you query and set them.
>
>
uvcdynctrl that is.
guvcview will give you an int
You might try uvcdynctl that is what I have been using as it directly
talks to the webcam.
It will show the controls that exist and let you query and set them.
On Thu, Mar 11, 2021 at 4:14 PM Ed Greshko wrote:
>
> On 12/03/2021 05:24, Paul Smith
0x0098f902 (int): min=0 max=10
step=1 default=0 value=0
timeout_image_io 0x0098f903 (bool) : default=0 value=0
#
---
I have only one webcam. But I am using a virtual camera via OBS Studio.
AFAIK, the v4l2-ctl command gets its information from
On Thu, Mar 11, 2021 at 9:14 PM Ed Greshko wrote:
>
> > To turn off the auto-focus feature of my webcam, I used the following
> > command:
> >
> > v4l2-ctl -c focus_auto=0
> >
> > However, recently, the same command returns the following:
> >
>
On 12/03/2021 04:34, Paul Smith wrote:
Dear All,
To turn off the auto-focus feature of my webcam, I used the following command:
v4l2-ctl -c focus_auto=0
However, recently, the same command returns the following:
# v4l2-ctl -c focus_auto=0
unknown control 'focus_auto'
#
Any ide
Dear All,
To turn off the auto-focus feature of my webcam, I used the following command:
v4l2-ctl -c focus_auto=0
However, recently, the same command returns the following:
# v4l2-ctl -c focus_auto=0
unknown control 'focus_auto'
#
Any ideas?
Thanks in adva
> > > guvcview has a "-z" option to bring it up in control-only mode,
> > > otherwise it grabs the video stream too.
> > I did not see that option in the man page. How did you know (or find out)
> > about it?
> I ran "guvcview --help" and hoped it printed help :-)
Where would we be without th
> From a script you can use uvcdynctrl. My experience is you can use
> this while something else is actively using the webcam.
Thank-you, Roger.
If the other two don't work, I'll give this a try.
___
users mailing list -- users@lists.f
"home user" writes:
>> guvcview has a "-z" option to bring it up in control-only mode,
>
> I did not see that option in the man page. How did you know (or find out)
> about it?
I ran "guvcview --help" and hoped it printed help :-)
___
users mailing li
> I use gtk-v4l to control the webcam during meetings
ok,
I just installed that too. It launches ok, but until I have a zoom (or
something similar) meeting, I won't know if it really works.
> guvcview has a "-z" option to bring it up in control-only mode,
> otherwise i
From a script you can use uvcdynctrl. My experience is you can use
this while something else is actively using the webcam.
On Wed, Aug 19, 2020 at 1:45 PM DJ Delorie wrote:
>
>
> I use gtk-v4l to control the webcam during meetings
>
> guvcview has a "-z" option to br
I use gtk-v4l to control the webcam during meetings
guvcview has a "-z" option to bring it up in control-only mode,
otherwise it grabs the video stream too.
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an emai
(on Wed, 19 Aug 2020 10:54 AM mountain time, George wrote;)
> I use guvcview. It's in the Fedora repo.
Found it.
My system claims it's in the rpmfusion-free repository.
Installed it successfully (dnf install guvcview).
Seems to work. The real test will be during the next zoom meeting I'm
an a
On Wed, 19 Aug 2020 16:42:08 -, home user wrote:
> (f31; gnome)
>
> I have a Ligitech HD Pro Webcam C920; it connects to the tower via USB
> port. I have not been able to find anything installed to control it,
> for example to get it to zoom in or out. I also tried dnf and
(f31; gnome)
I have a Ligitech HD Pro Webcam C920; it connects to the tower via USB port. I
have not been able to find anything installed to control it, for example to get
it to zoom in or out. I also tried dnf and dnfdragora to try to find something
to install.
What is available
Le 19/09/2018 à 01:28, Joe Zeff a écrit :
> On 09/18/2018 09:35 AM, François Patte wrote:
>> Bonjour,
>>
>> On my desktop, when I plug an usb webcam, two /dev/video (0 and 1) are
>> created. Only one displays video though.
>>
>> Why?
>
> I don't
On 09/18/2018 09:35 AM, François Patte wrote:
Bonjour,
On my desktop, when I plug an usb webcam, two /dev/video (0 and 1) are
created. Only one displays video though.
Why?
I don't know, but I just checked and I have the same thing. As long as
your webcam works, it's probably
Hello,
On Tue, 18 Sep 2018 10:54:37 -0700 Samuel Sieb wrote:
> On 9/18/18 8:35 AM, François Patte wrote:
> > On my desktop, when I plug an usb webcam, two /dev/video (0 and 1) are
> > created. Only one displays video though.
>
> I noticed this recently as well. I had
On 9/18/18 8:35 AM, François Patte wrote:
On my desktop, when I plug an usb webcam, two /dev/video (0 and 1) are
created. Only one displays video though.
I noticed this recently as well. I had the laptop webcam and an
external one connected and there were four video devices, of which two
Bonjour,
On my desktop, when I plug an usb webcam, two /dev/video (0 and 1) are
created. Only one displays video though.
Why?
Thank you.
--
François Patte
UFR de mathématiques et informatique
Laboratoire CNRS MAP5, UMR 8145
Université Paris Descartes
45, rue des Saints Pères
F-75270 Paris
gt; >>> Device Descriptor:
> >>> bLength18
> >>> bDescriptorType 1
> >>> bcdUSB 2.00
> >>> bDeviceClass 239 Miscellaneous Device
> >>> bDeviceSubClass 2
> >>>
;>> bDeviceClass 239 Miscellaneous Device
>>> bDeviceSubClass 2
>>> bDeviceProtocol 1 Interface Association
>>> bMaxPacketSize064
>>> idVendor 0x5986 Acer, Inc
>>> idProduct 0x0683
>
ss 2
> > bDeviceProtocol 1 Interface Association
> > bMaxPacketSize064
> > idVendor 0x5986 Acer, Inc
> > idProduct 0x0683
> > bcdDevice3.04
> > iManufacturer 3 Bison
> > iProduct
bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 239 Miscellaneous Device
> bDeviceSubClass 2
> bDeviceProtocol 1 Interface Association
> bMaxPacketSize064
> idVendor 0x5986 Acer, Inc
> idProduct 0
> Subject: Re: webcam
>
> On 02/11/18 10:01, Patrick Dupre wrote:
> >> On 02/10/2018 05:30 PM, Patrick Dupre wrote:
> >>> OK,
> >>>
> >>> It works from liveUSB
> >>>
> >>&g
Patrick Dupre writes:
>
> On 02/10/2018 05:30 PM, Patrick Dupre wrote:
> > OK,
> >
> > It works from liveUSB
> >
> > So, what should I do?
>
> Well, at least we know it's not a hardware issue.
> ___
My understanding is that I did not install the driver
On 02/11/18 10:01, Patrick Dupre wrote:
>> On 02/10/2018 05:30 PM, Patrick Dupre wrote:
>>> OK,
>>>
>>> It works from liveUSB
>>>
>>> So, what should I do?
>> Well, at least we know it's not a hardware issue.
>> ___
> My understanding is that I did not in
>
> On 02/10/2018 05:30 PM, Patrick Dupre wrote:
> > OK,
> >
> > It works from liveUSB
> >
> > So, what should I do?
>
> Well, at least we know it's not a hardware issue.
> ___
My understanding is that I did not install the driver for the camera
during
Probably, I did not install the drivers
How can I do this now?
> On 02/10/2018 05:30 PM, Patrick Dupre wrote:
> > OK,
> >
> > It works from liveUSB
> >
> > So, what should I do?
>
> Well, at least we know it's not a hardware issue.
> ___
> users maili
On 02/10/2018 05:30 PM, Patrick Dupre wrote:
OK,
It works from liveUSB
So, what should I do?
Well, at least we know it's not a hardware issue.
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.
OK,
It works from liveUSB
So, what should I do?
>
> On 02/10/2018 03:37 PM, Patrick Dupre wrote:
> > No,
> >
> > It is an integrated webcam, and I never tried to use it before.
>
> Thank you; that means that we don't know if the webcam works or not.
> Ha
On 02/10/2018 03:37 PM, Patrick Dupre wrote:
No,
It is an integrated webcam, and I never tried to use it before.
Thank you; that means that we don't know if the webcam works or not.
Have you tried booting from a LiveUSB to see if it pic
No,
It is an integrated webcam, and I never tried to use it before.
>
> On 02/10/2018 01:27 PM, Patrick Dupre wrote:
> > Actually, it activated in the BIOS (I do not see the camera in the Bios!)
> > But under fedora (gnome), when I press FN, switch to a display
> >
that gnome
has it own way to managing the fn keys.
I'll ask again: has your webcam ever worked under Fedora?
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
On my T540, there is no obvious webcam in lsusb or lspci, but the camera
works fine. (well, it would work fine except I put a sticker over it)
--McD
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le
> Sent: Saturday, February 10, 2018 at 10:15 PM
> From: "Joe Zeff"
> To: users@lists.fedoraproject.org
> Subject: Re: webcam
>
> On 02/10/2018 01:04 PM, Patrick Dupre wrote:
> > In therory, the switch is FN+F6, but it does not work.
>
> Did it ever?
Actu
On 02/10/2018 01:04 PM, Patrick Dupre wrote:
In therory, the switch is FN+F6, but it does not work.
Did it ever?
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
vice 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 002: ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foun
oot hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Li
> Hi,
>
> On 10-02-18 21:04, Patrick Dupre wrote:
> > Hello,
> >
> > I have a laptop with a webcam.
> > Can I activate it?
> > I run cheese
> > It say No device detected.
> >
> > Should I install some drivers?
> >
&
Hi,
On 10-02-18 21:04, Patrick Dupre wrote:
Hello,
I have a laptop with a webcam.
Can I activate it?
I run cheese
It say No device detected.
Should I install some drivers?
mplayer tv://
MPlayer 1.3.0-7 (C) 2000-2016 MPlayer Team
Playing tv://.
TV file format detected.
Selected driver: v4l2
Hello,
I have a laptop with a webcam.
Can I activate it?
I run cheese
It say No device detected.
Should I install some drivers?
mplayer tv://
MPlayer 1.3.0-7 (C) 2000-2016 MPlayer Team
Playing tv://.
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin
nothing useful. It displays a snapshut of
my desktop. If it makes a difference I'm using mate desktop.
Anyone else have a webcam working under f27?
Any help is appreciated.
Thanks
,Paolo
___
users mailing list -- users@lists.fedoraproject.o
nothing useful. It displays a snapshut of
my desktop. If it makes a difference I'm using mate desktop.
Anyone else have a webcam working under f27?
Any help is appreciated.
Thanks
,Paolo
___
users mailing list -- users@lists.fedoraproject.o
desktop. If it makes a difference I'm using mate desktop.
Anyone else have a webcam working under f27?
Any help is appreciated.
Thanks
,Paolo
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to use
There's a site with lots of webcams from all over the world,
http://www.webcamgalore.com .
I would like to use periodic grabs of some of those webcams as a
wallpaper. Say, every 10 seconds the app goes and grabs an image from
the cam, and puts it as wallpaper. If offline, or the cam is not
avail
On Friday 15 May 2015 14:40:20 Gary Stainburn wrote:
> Hi folks.
>
> I know this seems to ber a regular problem but none of the things I've
> found so far seem to work.
>
> My cam works fine in cheese, and works fine in skype. However, Flash
> doesn't even see it, and on the Flash admin panel the
Hi folks.
I know this seems to ber a regular problem but none of the things I've found
so far seem to work.
My cam works fine in cheese, and works fine in skype. However, Flash doesn't
even see it, and on the Flash admin panel the web cam tab doesn't even show.
I'm using a HP Envy 17-J184na
SB device to make sure it appeared as a predictable /dev/video.
>
> Did you try looking in /dev/v4l? My laptop builtin webcam leaves
> entries in there. The v4l directory has 2 sub-directories: by-id and
> by-path which contain entries for my webcam.
Hi Kev!
Yes, late yesterday I learned
l? My laptop builtin webcam leaves
entries in there. The v4l directory has 2 sub-directories: by-id and
by-path which contain entries for my webcam.
> I did something similar to recognize my 3D printer when I plug it
> in, and it was quite challenging to make all my code work
> because systemd
On Thu, 6 Nov 2014 18:47:23 -0500
Fred Smith wrote:
> not finding anything on that, I hit on writing a udev rule for the
> USB device to make sure it appeared as a predictable /dev/video.
I did something similar to recognize my 3D printer when I plug it
in, and it was quite challenging to make al
m:
lsusb:
Bus 001 Device 002: ID 046d:0825 Logitech, Inc. Webcam C270
so, according to one of the recipes I found, if I make a rule like this
it should work:
SUBSYSTEM=="video4linux", SUBSYSTEM=="usb", ATTRS{idVendor}=="0x046d",
ATTRS{idProduct}=="0x0825",
es
>>> ... find out the number N for your webcam (look for "index" at the
>>> start of a section mentioning its type, or do something like:
>>> $ pacmd list-sources|grep -E "device.product.name|index"
>>>
>>> $ pacmd set-default-sou
On 15 May 2014 13:17, Paul Cartwright wrote:
> On 05/15/2014 04:03 AM, Ian Malone wrote:
>> Until you have pavucontrol fixed there is a command line approach. I
>> think this should work:
>> $ pacmd list-sources
>> ... find out the number N for your webcam (look for &
On 05/15/2014 03:12 PM, Jan Litwiński wrote:
> to work sound in Skype in Fedora 20 you must edit file:
>
> sudo nano /usr/share/applications/skype.desktop
>
> and change:
>
> Exec=skype %U
>
> to:
>
> Exec=env PULSE_LATENCY_MSEC=30 skype %U
>
> then restart Skype
that line was already in there .:
[
- Oryginalna wiadomość -
> Od: "Paul Cartwright"
> Do: "Ian Malone" , "Community support for Fedora users"
>
> Wysłane: czwartek, 15 maj 2014 14:17:21
> Temat: Re: Logitech C310 webcam- sound back
>
> On 05/15/2014 04:03 AM, Ian
On 05/15/2014 04:03 AM, Ian Malone wrote:
> Until you have pavucontrol fixed there is a command line approach. I
> think this should work:
> $ pacmd list-sources
> ... find out the number N for your webcam (look for "index" at the
> start of a section mentioning its t
On 05/15/2014 04:03 AM, Ian Malone wrote:
> $ pacmd set-default-source N
>
>
> To move a particular one (e.g. skype) once already started,
> $ pacmd list-source-outputs
> ... find the number M for skype.
> Or something like:
> $ pacmd list-source-outputs|grep -E "index|application.name"
>
> $ pacmd
On 05/15/2014 04:03 AM, Ian Malone wrote:
> Until you have pavucontrol fixed there is a command line approach. I
> think this should work:
> $ pacmd list-sources
> ... find out the number N for your webcam (look for "index" at the
> start of a section mentioning its t
On 05/14/2014 08:56 PM, Rick Stevens wrote:
>>
>> I should have added could you post the bugzilla #.
>
> Since the traceback is complaining about libpulsecommon, can you tell
> us what version of pulseaudio-libs you have? I'm running
> 4.0-13.gitf81e3.fc20.
not sure why I have 2 versions..
y
On 05/14/2014 08:52 PM, Ed Greshko wrote:
>> > and /var/log/messages showed:
>> > May 14 20:27:09 pauls-server kernel: [21555.078081] pavucontrol[6061]:
>> > segfault at 7f7d5bfff000 ip 7f7d6d023517 sp 7fff311a5590 error 4
>> > in libpulsecommon-4.0.so[7f7d6cff2000+6c000]
>> > May 14 20:27:
On 15 May 2014 01:20, Paul Cartwright wrote:
> On 05/14/2014 05:31 PM, Paul W. Frields wrote:
>>> On 05/14/2014 12:01 PM, Paul Cartwright issued this missive:
>>>> > >I am running Fedora 20 amd_64 . I just setup a Logitach HD webcam
>>>> > >C310.
On 05/14/2014 05:52 PM, Ed Greshko issued this missive:
On 05/15/14 08:35, Paul Cartwright wrote:
On 05/14/2014 08:24 PM, Ed Greshko wrote:
already installed. PA volume control crashes, so it is a moot point. I
am running MATE desktop, I may have to try exfc or something else..
Do you have a
On 05/15/14 08:35, Paul Cartwright wrote:
> On 05/14/2014 08:24 PM, Ed Greshko wrote:
already installed. PA volume control crashes, so it is a moot point. I
am running MATE desktop, I may have to try exfc or something else..
>> Do you have a bugzilla filed for the pavucontrol problem
On 05/14/2014 08:24 PM, Ed Greshko wrote:
>> > already installed. PA volume control crashes, so it is a moot point. I
>> > am running MATE desktop, I may have to try exfc or something else..
>> >
> Do you have a bugzilla filed for the pavucontrol problem?
when I click on the red bell , the crash co
On 05/14/2014 05:20 PM, Paul Cartwright issued this missive:
On 05/14/2014 05:31 PM, Paul W. Frields wrote:
On 05/14/2014 12:01 PM, Paul Cartwright issued this missive:
I am running Fedora 20 amd_64 . I just setup a Logitach HD webcam
C310. Audacity can record from the webcam, so I know it
On 05/15/14 08:20, Paul Cartwright wrote:
> On 05/14/2014 05:31 PM, Paul W. Frields wrote:
>>> On 05/14/2014 12:01 PM, Paul Cartwright issued this missive:
>>>>>> I am running Fedora 20 amd_64 . I just setup a Logitach HD webcam
>>>>>> C310. A
On 05/14/2014 05:31 PM, Paul W. Frields wrote:
>> On 05/14/2014 12:01 PM, Paul Cartwright issued this missive:
>>> > >I am running Fedora 20 amd_64 . I just setup a Logitach HD webcam
>>> > >C310. Audacity can record from the webcam, so I know it works. Skype
On 05/14/2014 05:12 PM, Rick Stevens wrote:
>> I am running Fedora 20 amd_64 . I just setup a Logitach HD webcam
>> C310. Audacity can record from the webcam, so I know it works. Skype
>> video works, but no audio on the test call.. I've tried a bunch of fixes
>> f
1 - 100 of 223 matches
Mail list logo
