follows is a complete set of
tail -f /var/cups/log/error_log and tail -f /var/log/messages
done today may 16 2013, starting with manually turning printer off:
E [16/May/2013:10:03:59 -0700] Failed to update TXT record for
Hewlett-Packard HP LaserJet 2200 @ F17sda10.pacbell.net: -2
also seen in
On 05/15/2013 04:34 PM, jackson byers wrote:
uname -r
3.8.12-100.fc17.i686.PAE
this is a new update from 3.8.11-100, just today
but printing problem still persists
OK, the kernel probably isn't the issue. However, if you still have the
last kernel installed from before this started, you mig
Joe Zeff wrote:
>Try this: boot into the newer kernel, print a test page, then look at the
most
>recent entries in /var/log/cups/error_log. Try to print again and check
again.
>You might find something there that points in the right direction.
see the lines below from error_log, they don't mean
On 05/13/2013 11:18 AM, jackson byers wrote:
if I reboot to my old f16, printing works continually.
From what you wrote, you upgraded from F 16 to 17, so there's no "old
f16" to boot into. I presume that what you meant is that you boot using
the last F 16 kernel installed. If so, that sugge
f17 recent preupgrade from f16
mostly works.
But printing from f17 is stalling in odd way:
1) printing a test file works
2) a 2d attempt at printing a test file hangs,
printer light continues to blink, never stops
lpstat -t shows
printer HP-LaserJet-2200 is idle. enabled since Mon 13 May 2013 1
