I believe to move to another motherboard you would need to do a bit of
messing around. If the new motherboard was the same vendor and was
also set the same (assuming it is set to raid for SATA) then it would
likely work.
You might want to check in the bios/firmware/EFI to see what the SATA
contro
H
Did not know there was such a thing as dm-raid. It was built up by the
installer.
Makes me wonder, should something happen to the MB, will it be problematic
to move the discs to another system?
I am assuming if one disk falls, the mdmraid commands to rebuild the array
would still be the same
Did you build a mdadm raid1 or a dm-raid raid 1?
+imsm means you built a dm-raid device (software raid that the
bios/efi is aware of) and it is slightly different from a normal
mdadm.
If it works and uses the correct device names on each boot up then I
would not touch it.
If you do touch it then
