Re: Remote debugger error message

I got this error in a new install of LC969 on a brand new Windows 11 HP laptop. After I quit LC and started it again, I have not seen the error. I think there may have been some Windows notification that appeared but went away before I could do anything in the standard Win10/11 Notifications

Re: Remote debugger error message

I've seen the same error more than once but it's a bit random and I don't know what triggers it. It's only in the IDE so far, even though I've included the remote debugger in the standalone. Funny that it should occur in the IDE when the remote debugger isn't active. The remote debugger in the

Re: Remote debugger error message

panagiotis m asked: @david How do you trigger this error? Could you provide a recipe? With the stacks that trigger the error it is hard to troubleshoot them without triggering the error. So I’m starting with an entirely new stack, and will report if I encounter the problem. I suspect the probl

Re: Remote debugger error message

Hello all, @mike The revdebuggerlibrary.livecodescript is not the remote debugger - it is the IDE debugger for the script editor. The remote debugger is a protected stack and it is not present in the repo. @david How do you trigger this error? Could you provide a recipe? Kind regards, Panos --

Re: Remote debugger error message

ugh. you could try removing the remote debugger from your inclusions and including the OSS version: https://github.com/livecode/livecode-ide/blob/ccc733a1539ed2e313abe649b38b83e9fddd1541/Toolset/libraries/revdebuggerlibrary.livecodescript you may also be able to edit the livecode bundle, removing t

Re: Remote Debugger 9.6dp1?

Yes, same local network, via wifi, but it is also plugged into an external dock with multiple ports. The dock itself goes into the new USB "C" ports on the Mac Book Pro. (The only way I can see it among the test targets) Is the iPhone on the same local network as IDE? > On 1 Dec 2019, at 1:27

Re: Remote Debugger 9.6dp1?

Is the iPhone on the same local network as IDE? > On 1 Dec 2019, at 1:27 pm, Sannyasin Brahmanathaswami via use-livecode > wrote: > > I have Remote Debugger in the inclusions for making a mobile standalone > The Development Menu has checked "Script Debug Mode" > > I put an explicit "breakpoint

Re: Remote Debugger 9.6dp1?

I haven't tried it with a separate standalone running independently, but if I build directly to the device it works, at least on Android and the iOS simulator. On 11/30/19 8:27 PM, Sannyasin Brahmanathaswami via use-livecode wrote: I have Remote Debugger in the inclusions for making a mobile s

Re: Remote Debugger Anomalies

Yes, it is part of the repo. https://github.com/trevordevore/levure/tree/master/utils/external_editor_server -- Trevor DeVore ScreenSteps On Mon, Sep 17, 2018 at 9:58 AM Sannyasin Brahmanathaswami via use-livecode wrote: > Do you have that "script acting as a server" available in Levure? > >

Re: Remote Debugger Anomalies

Do you have that "script acting as a server" available in Levure? On 9/17/18 2:31 AM, Trevor DeVore via use-livecode wrote: > When working on a project I always work in ST with the LC IDE open. LC has > a script acting as a server running and ST is the client. ST sends a > notification to LC when

Re: Remote Debugger Anomalies

On Sun, Sep 16, 2018 at 11:54 PM Sannyasin Brahmanathaswami via use-livecode wrote: > > I suppose Trevor would chime here. If you to switch Sublime text and > stay away for SE all together, all the problems go away? Because when > you save the script you know it is in the state of your recent > m

Re: Remote Debugger Anomalies

On 9/16/18 1:38 PM, J. Landman Gay via use-livecode wrote: > Stacks named that way were the ones I tried deleting when the whole IDE > wen I suppose Trevor would chime here. If you to switch Sublime text and stay away for SE all together, all the problems go away? Because when you save the scri

Re: Remote Debugger Anomalies

Stacks named that way were the ones I tried deleting when the whole IDE went down on my next test build. I decided not to do that any more. :) -- Jacqueline Landman Gay | jac...@hyperactivesw.com HyperActive Software | http://www.hyperactivesw.com On September 16, 2018 6:20:13 PM Monte Goulding v

Re: Remote Debugger Anomalies

> On 16 Sep 2018, at 10:36 am, Sannyasin Brahmanathaswami via use-livecode > wrote: > > No doubt Monte is going to say :-) "this is not problem, best you ignore > this" ha!~ This seems a bit unfair to me. I don’t think I’ve ever said that. Clearly if you are having a problem then there’s a p

Re: Remote Debugger Anomalies

> On 16 Sep 2018, at 1:47 am, Sannyasin Brahmanathaswami via use-livecode > wrote: > > OK, given that we understand the problem, to be solved one day. > > Until then, how do we work around it? > > Give an error, and the Script Editor "becomes" > > stack "d2dc63f5-efeb-412c-a6ae-741d60b569de

Re: Remote Debugger Anomalies

Well I play with it a while, I don't have a perfect recipe yet... 1) debug error show up. Do edit the script. You check the error and close the script editor. So far I think the IDE has no cache of it. 2) then on the phone, you go to App Info, Uninstall. So far I didn't get a cached script. But

Re: Remote Debugger Anomalies

I asked this before and the fix is to quit the app, if I remember right. The problem on Android is that apps never really quit, they remain in the background until the OS needs the RAM. When the OS wipes the app, we don't receive any messages so the debugger won't know when the socket closes. Th

Re: Remote Debugger Anomalies

On 9/13/18 10:47 AM, Monte Goulding via use-livecode wrote: > OK that definitely gives me an idea. The cache is meant to be cleaned up when > the socket closes so should be happening between launches of the app but we > can also force the debug session to end during the deploy of the new version

Re: Remote Debugger Anomalies

I made no changes in the second branch, so I deleted it and made a new one from nightly. But, a) since I received a stack from Elanor b) never have opened before c) edit the stack script d) see the stack script of a debug session from Elanor, (Stack name is a usual long ID number) It makes you

Re: Remote Debugger Anomalies

> On 13 Sep 2018, at 11:42 pm, Andrew Bell via use-livecode > wrote: > >> - The stack that caches object scripts is not being cleaned up properly >> between debugging sessions. This would mean that you would see the old >> script but what would be executing would be the new script. One way

Re: Remote Debugger Anomalies

It does not sound like the remote debugger was involved at all in this story so perhaps look elsewhere for the problem. > On 14 Sep 2018, at 6:12 am, Sannyasin Brahmanathaswami via use-livecode > wrote: > > Well this is somewhat "urgent" due to a scenario I just witness. > > It GIT --> branc

Re: Remote Debugger Anomalies

Well this is somewhat "urgent" due to a scenario I just witness. It GIT --> branch -- nightly # scripts updated. committed switch to branch "fixIosBrowser" git merge nightly # get the usual conflict of binary stacks.. git checkout --theirs "view/view_SivaSivaBrowser.livecode" #presumably u

Re: Remote Debugger Anomalies

On 9/13/18 8:42 AM, Andrew Bell via use-livecode wrote: - The stack that caches object scripts is not being cleaned up properly between debugging sessions. This would mean that you would see the old script but what would be executing would be the new script. One way to test this might be to mov

Re: Remote Debugger Anomalies

- The stack that caches object scripts is not being cleaned up properly between debugging sessions. This would mean that you would see the old script but what would be executing would be the new script. One way to test this might be to move a breakpoint statement from one line to another an

Re: Remote Debugger Anomalies

> On 13 Sep 2018, at 5:08 am, J. Landman Gay via use-livecode > wrote: > > I've seen the same thing repeatedly. I wasn't able to work around the > problem. I'd like a way to manually force the debugger to unload itself and > reload the new script. I’d really like to get to the bottom of thi

Re: Remote Debugger Anomalies

I've seen the same thing repeatedly. I wasn't able to work around the problem. I'd like a way to manually force the debugger to unload itself and reload the new script. There is a bug report you can add to: On 9/12/18 8:40 AM, Sannyasin Brah

Re: Remote Debugger Anomalies

Hmm I just go a test stack from Elanor... never open before It has the debug script when she ran it on android saved into SA builder! I went to edit it and get unusual ID 536434756567-36465 (etc.) ? On 9/12/18 3:40 AM, Sannyasin Brahmanathaswami via use-livecode wrote: > -- Shut down LC > -

Re: Remote Debugger Frustrations

> On 1 Nov 2017, at 1:45 pm, J. Landman Gay via use-livecode > wrote: > >> Once you hit a breakpoint you should be able to change breakpoints in the >> open debugger. > > This I didn't know, I wasn't able to do that. To verify: I have to be stopped > at a breakpoint first before changing or

Re: Remote Debugger Frustrations

On 10/31/17 4:14 PM, Monte Goulding via use-livecode wrote: Once you hit a breakpoint you should be able to change breakpoints in the open debugger. This I didn't know, I wasn't able to do that. To verify: I have to be stopped at a breakpoint first before changing or adding one? I didn't do

Re: Remote Debugger Frustrations

> On 31 Oct 2017, at 9:15 pm, Peter Reid via use-livecode > wrote: > > How are people getting on with the remote debugger facility? I'm finding it > very useful but also frustrating for the following reasons: > > 1. It's SLOW. I'm running LC 9 on an iMac with a 4GHz quad i7 processor and > 2

Re: Remote Debugger Frustrations

On 10/31/17 5:15 AM, Peter Reid via use-livecode wrote: 3. Often it steps through the script as it was just before the latest change, i.e. it doesn't take into account the latest script edits. 4. It can be difficult to change break points during remote debugging. You need to recompile/rebuild

Re: remote debugger on windows

On 04/04/2017 06:36 PM, Monte Goulding via use-livecode wrote: What socket(s) does the remote debugger use? I'd like to stay out of its way. It begins at 54321 and bumps the port each time accept fails until it finds one. The standalone is then inited with the current port in use by the IDE a

Re: remote debugger on windows

> On 5 Apr 2017, at 11:11 am, Mark Wieder via use-livecode > wrote: > > On 04/04/2017 04:49 PM, Monte Goulding via use-livecode wrote: >> Hmm… the remote debugger uses sockets. > > What socket(s) does the remote debugger use? I'd like to stay out of its way. It begins at 54321 and bumps the p

Re: remote debugger on windows

On 04/04/2017 04:49 PM, Monte Goulding via use-livecode wrote: Hmm… the remote debugger uses sockets. What socket(s) does the remote debugger use? I'd like to stay out of its way. -- Mark Wieder ahsoftw...@gmail.com ___ use-livecode mailing lis

Re: remote debugger on windows

Thanks Monte. There was an instance of the standalone stuck in task manager. Forcing that to end allowed the popup and debugging window to work mostly as described. It ran into an error when it got to revZipOpenArchive and the script died. The debugger didn't do anything particularly helpful there

Re: remote debugger on windows

Hmm… the remote debugger uses sockets. You might want to check the IDE is being allowed to accept connections. Also perhaps check if there are any rogue processes of the standalone or IDE in the task manager. > On 5 Apr 2017, at 9:32 am, Matt Maier via use-livecode > wrote: > > I'm not trying

Re: Remote debugger

Where can the new version be found? Is this page still maintained? http://mergext.com/plugins/mergdeploy/ On Mon, Mar 6, 2017 at 2:19 PM, Monte Goulding via use-livecode < use-livecode@lists.runrev.com> wrote: > > > On 7 Mar 2017, at 4:01 am, Mike Kerner via use-livecode < > use-livecode@lists

Re: Remote debugger

> On 7 Mar 2017, at 4:01 am, Mike Kerner via use-livecode > wrote: > > 1) There may be a crash bug related to mergDeploy (19365). I don't KNOW > that's mergDeploy related, but if MD is enabled, LC crashes, and if it is > not, it doesn't. > 2) Seeing !n instead of device name (19376) Hopefully

Re: Remote debugger

Monte, A couple of things: 1) There may be a crash bug related to mergDeploy (19365). I don't KNOW that's mergDeploy related, but if MD is enabled, LC crashes, and if it is not, it doesn't. 2) Seeing !n instead of device name (19376) On Sun, Mar 5, 2017 at 8:00 PM, Monte Goulding via use-livecode

Re: Remote debugger

Hi Folks gREVDevelopment is not necessary for the remote debugger to function. I have create an enhancement report for the remote debugger to automatically turn on android internet permissions: http://quality.livecode.com/show_bug.cgi?id=19370

Re: Remote debugger

Never mind… went thru the whole process again. on android → force stop the app and then the IDE says the debugging session closed. Awesome I found an obscure bug or rather difference binfile://someAppPath/Unicode.txt into myNewText works on iOS and Mac OSX but not on android only 1 slash all

Re: Remote debugger

Eureka! I got it working on Andrioid --TSNet, check --internet, check --remote debugger, check --internet permissions, check -- manually set gRevDevelopment to true (in msg box) # confirmed it is false even when checked in the IDE (weird) -- set break point in a script -- plug in Nexus5 wit

Re: Remote debugger

I have it working on ios, but I have found several bugs with it. It's the first try... On Sat, Mar 4, 2017 at 5:35 PM, Dave Kilroy via use-livecode < use-livecode@lists.runrev.com> wrote: > Thanks Jacque - but I’m not convinced that’s it - I set that (for android) > plus Internet, Remote Debugge

Re: Remote debugger

Thanks Jacque - but I’m not convinced that’s it - I set that (for android) plus Internet, Remote Debugger - and have tried various combinations of including and not including tsNet - and have rebooted by mac and router … but I don’t think I tried making wifi required for iOS, will try that in th

Re: Remote debugger

On 3/4/17 1:58 PM, Dave Kilroy via use-livecode wrote: Nope I can’t get this working in iOS or Android :( however it does fire in the iOS simulator http://quality.livecode.com/show_bug.cgi?id=19367 Looks like you fell into the same trap I did. You have to enable internet permissions on Andro

Re: Remote debugger

Nope I can’t get this working in iOS or Android :( however it does fire in the iOS simulator http://quality.livecode.com/show_bug.cgi?id=19367 ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe

Re: Remote debugger

J. Landman Gay wrote: So far, all I've found is the blog post: Thanks. Seems easier for android because you can run test to the device on a tethered phone, but I can't do that with iPHone (or can we?) you can o

Re: Remote debugger

So far, all I've found is the blog post: It's really great for debugging, a huge step forward. The only glitch I found was that I couldn't figure out how to turn it off. I removed all breakpoints and hit the Test button aga

Re: Remote debugger

I'm very late to this party. Where is the documentation? I set the inclusion, run test target my android → nexus 5 and the dialog opens "Do you want to start remote debugging" I say yes… click through my app on the phone until finally it crashes and quits. Dialog in the IDE opens "Remote debu

Re: Remote debugger

Thanks for the positive feedback. It was an interesting project but *hard* to debug when something went wrong. > On 25 Feb 2017, at 6:48 am, J. Landman Gay via use-livecode > wrote: > > I'd suggest that documentation make it clear what permissions and inclusions > need to be set up. I'm not s

Re: Remote debugger

Today I spent most of the day using a proximal debugger: a nit comb, for the simple reason that as the weather has warmed up several of the children picked up head-lice from "somewhere". When I saw postings about a "remote debugger" it cheered me up no end after an awful day. Thanks; what a

Re: Remote debugger

But if you wanted to continue developing an alternative way of remote debugging, the open-source LC users would love you. :) On Fri, Feb 24, 2017 at 2:48 PM, J. Landman Gay via use-livecode < use-livecode@lists.runrev.com> wrote: > On 2/24/17 2:36 AM, Monte Goulding via use-livecode wrote: > >>

Re: Remote debugger

On 2/24/17 2:36 AM, Monte Goulding via use-livecode wrote: You need to ensure the internet permission is on for android. We probably should make that automagicial with the test button.. Oh duh. Of course. I had overlooked the Android permission. Just in case, I also added internet and TSNet to

Re: Remote debugger

Some more instruction on this might be helpful - if there is a socket connection, what port has to be clear? Is the development machine supposed to be listening for the mobile? I have additional security on our network, and on each endpoint, so that may need to be dealt with. On Fri, Feb 24, 201

Re: Remote debugger

The dialog asking if you want to start a remote debug session should occur as soon as you launch the app, so if that isn't happening then something is not working with the socket, I would imagine. Perhaps try with the phone actually connected by USB to the Mac and see if that works? On Fri, Feb 24

Re: Remote debugger

You need to ensure the internet permission is on for android. We probably should make that automagicial with the test button.. Sent from my iPhone > On 24 Feb 2017, at 4:44 pm, J. Landman Gay via use-livecode > wrote: > > I jumped all over this right away. I set a breakpoint in a test stack,

Re: Remote debugger

Debug mode is on (it always is, but I just checked again.) I set gRevDevelopment to true, but no change. It acts like the phone script stops at the breakpoint but the IDE doesn't know anything happened. On 2/24/17 12:39 AM, panagiotis merakos via use-livecode wrote: Hmm I guess you have check

Re: Remote debugger

Hmm I guess you have checked Script Debug mode, is that correct? Maybe it is worth typing in the msg box "put true into grevdevelopment" and test again. This will catch any silent failure in the IDE, if any. On 24 Feb 2017 06:31, "J. Landman Gay via use-livecode" < use-livecode@lists.runrev.com> w

Re: Remote debugger

How do the sockets communicate? My phone is on wifi, my Mac is ethernet. They both go through the same router though. On 2/24/17 12:21 AM, panagiotis merakos via use-livecode wrote: Hi Jacque, Make sure you add the remote debugger inclusion in Inclusions pane. This should not be necessary in t

Re: Remote debugger

Hi Panos, I did it both ways, with the remote debugger included and without, but got the same results. It stops the app at the point where it should activate and nothing else happens. On 2/24/17 12:21 AM, panagiotis merakos via use-livecode wrote: Hi Jacque, Make sure you add the remote de

Re: Remote debugger

Hi Jacque, Make sure you add the remote debugger inclusion in Inclusions pane. This should not be necessary in the IDE, but currently you maybe have to do it. Best, Panos On 24 Feb 2017 05:45, "J. Landman Gay via use-livecode" < use-livecode@lists.runrev.com> wrote: > I jumped all over this rig