Strange thing, FYI, is that my clean install of 10.04 RC can boot.
Upgraded installation from 9.10 hangs forever.
--
Could not boot into Ubuntu 10.04 release candidate
https://bugs.launchpad.net/bugs/568738
You received this bug notification because you are a member of Ubuntu-X,
which is subscrib
At least for my Mobility Radeon HD3200, where I'm sure to have been
affected by exactly this bug, I can say that Kubuntu Lucid Beta2/RC
works. Logout shows KDM login screen again as it is expected.
But I must also say that solving such critical bugs takes too much time.
When a critical system comp
** Changed in: xserver-xorg-video-ati (Ubuntu)
Assignee: (unassigned) => Tormod Volden (tormodvolden)
--
[R350] screen corruption on 9800SE
https://bugs.launchpad.net/bugs/565883
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-vide
*** This bug is a duplicate of bug 568779 ***
https://bugs.launchpad.net/bugs/568779
Thinkpad X40 has the same graphic card with my BenQ Joybook 5000U
laptop: intel integrated graphics card (82852/855GM series) Your
description maches bug 568779 precisely, so I think this is a duplicate
of bug
*** This bug is a duplicate of bug 568779 ***
https://bugs.launchpad.net/bugs/568779
I googled "Dell Latitude X300" and found that the graphic card of it is
intel integrated graphics card (Intel Extreme Graphics 855 GM), the same
graphic card as my BenQ Joybook 5000U (Intel Corporation 82852/8
*** This bug is a duplicate of bug 568779 ***
https://bugs.launchpad.net/bugs/568779
This is a duplicate of bug #568779.
** This bug has been marked a duplicate of bug 568779
10.04 rc livecd boots into black/blank screen (intel 82852/855GM graphic
card)
--
blank screen and complete lock
** Changed in: fglrx-installer (Ubuntu)
Status: Incomplete => New
** Changed in: fglrx-installer (Ubuntu)
Status: New => Incomplete
--
package fglrx 2:8.723.1-0ubuntu2 failed to install/upgrade: subprocess
installed post-installation script returned error exit status 1
https://bug
"Out of the box, the actual "buttons" (which are physically part of the
pad area) don't work. To effectuate a click, one has to tap on the pad.
Right click is very hard, as one has to tap on the lower right corner of
the pad; it usually takes me a few tries. Two-fingered scrolling does
not work, bu
I registered to the FreeDesktop BugZilla, but am unfamiliar with it's
interface. There is no subscribe button anywhere on the bug page... is
the CC field the same as carbon copy from email?
--
[RV250] User switching breaks X-session(s)
https://bugs.launchpad.net/bugs/565835
You received this bug
Public bug reported:
Binary package hint: xorg
As it says in the title.
Currently debugging bug #567696 "[Radeon] [Lucid] [mi] EQ overflowing.
The server is probably stuck in an infinite loop" where the back-trace
includes several entries from /usr/bin/X but there are no debug symbols
on the dde
** Also affects: gnome-power-manager (Ubuntu)
Importance: Undecided
Status: New
--
Laptop display maximum dim at startup
https://bugs.launchpad.net/bugs/555709
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in ubuntu.
__
** Description changed:
Binary package hint: xorg
As it says in the title.
Currently debugging bug #567696 "[Radeon] [Lucid] [mi] EQ overflowing.
The server is probably stuck in an infinite loop" where the back-trace
- includes several entries from /usr/bin/X but there are no debug s
I can confirm from the bug #549632 if you do alt+f2 and type: xgamma
-gamma 1.0 that restores the display.
--
black screen when switching between multiple X session
https://bugs.launchpad.net/bugs/529882
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed
This bug report is being closed due to your last comment regarding this
being fixed in Lucid RC. For future reference you can manage the status
of your own bugs by clicking on the current status in the yellow line
and then choosing a new status in the revealed drop down box. You can
learn more abou
** Tags added: kubuntu
--
System settings - Compositing is not supported on your system.
https://bugs.launchpad.net/bugs/569301
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to fglrx-installer in ubuntu.
_
** Tags added: lucid
--
No debug symbols package for binary package xserver-xorg
https://bugs.launchpad.net/bugs/569352
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in ubuntu.
___
Mailing list: ht
And then after about a minute the "image" started to fading - more or less as
in attached but not quite the perfect square.
After this the image then got progressively lighter - (lightgrey to white) but
not fading out completely.
** Attachment added: "screen image after about 1 minute after cr
** Tags added: kubuntu
** Tags added: lucid
--
Kubuntu 10.04 RC xserver-xorg crashes during startup live session
https://bugs.launchpad.net/bugs/569008
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in ubuntu.
___
** Tags added: lucid
--
10.04 rc livecd boots into black/blank screen (intel 82852/855GM graphic card)
https://bugs.launchpad.net/bugs/568779
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in ubuntu.
__
I have had another occurance of the screen corruption. This time it was
a simple mouse movement.
Attached is an "artistic impression" of how the screen looked.
** Attachment added: "screen_1.jpg"
http://launchpadlibrarian.net/45165788/screen_1.jpg
--
screen corruption : multiple cases : fas
Sorry I send you wrong package.
Check this package:
http://launchpadlibrarian.net/29586443/xserver-xorg-video-openchrome_0.2.903%2Bsvn758-0ubuntu1_i386.deb
Or just go back in svn by using "svn update -r758" command.
--
[K8M800] Beta-2 live-CD login failure, Screen origin shifted to center, scre
It's fixed for me too. I have xserver-xorg-input-wacom installed.
--
WALTOP tablets not supported anymore
https://bugs.launchpad.net/bugs/392825
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xf86-input-wacom in ubuntu.
___
I wonder if the problem lies here with the EDID output:
Identifier "17'' LCD"
VendorName "RTK"
ModelName "17'' LCD"
Its a15 inch monitor.
--
Screen goes "Out of Range" when boot into live cd and first time ubuntu boot up
https://bugs.launchpad.net/bugs/529387
You received this bug notification
** Package changed: xorg (Ubuntu) => xserver-xorg-input-evdev (Ubuntu)
--
S and M keyS don't work, open logout and coMM Menu
https://bugs.launchpad.net/bugs/568916
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-input-evdev in ubuntu.
** Package changed: xorg (Ubuntu) => xserver-xorg-video-ati (Ubuntu)
--
video from Youtube or other sites(vkontakte.ru as example) playing much slowly
than sound
https://bugs.launchpad.net/bugs/568530
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to
** Package changed: xorg (Ubuntu) => xserver-xorg-video-intel (Ubuntu)
--
10.04 rc livecd boots into black/blank screen (intel 82852/855GM graphic card)
https://bugs.launchpad.net/bugs/568779
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-x
** Package changed: xorg (Ubuntu) => xorg-server (Ubuntu)
--
No debug symbols package for binary package xserver-xorg
https://bugs.launchpad.net/bugs/569352
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg-server in ubuntu.
** Tags added: xubuntu
--
[RS780 KMS] no poweroff on halt with KMS enabled
https://bugs.launchpad.net/bugs/569271
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-ati in ubuntu.
___
Mail
** Package changed: xorg (Ubuntu) => xorg-server (Ubuntu)
--
Kubuntu 10.04 RC xserver-xorg crashes during startup live session
https://bugs.launchpad.net/bugs/569008
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg-server in ubuntu.
___
** Package changed: xorg (Ubuntu) => xserver-xorg-input-evdev (Ubuntu)
--
sreen freezes, no keyboard interaction
https://bugs.launchpad.net/bugs/569004
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-input-evdev in ubuntu.
** Tags added: lucid
--
gdm fails to start
https://bugs.launchpad.net/bugs/554023
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-intel in ubuntu.
___
Mailing list: https://launchpad.ne
** Tags added: kubuntu
--
Kubuntu: Disable menu delay in KDE applications
https://bugs.launchpad.net/bugs/325516
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-intel in ubuntu.
___
Mai
Ilja, the NMI issue is a different one. You should report that
separately against "linux" since it is likely an issue with the kernel
(I'll take a guess there's an Atheros WiFi adaptor?). Create that report
from a terminal shell using:
ubuntu-bug linux
And when you've been logged into Launchpad s
It's impossible to reach the recovery mode of such installation, so I have
installed a clean installation on another partition, and chroot into the buggy
one, and did
dpkg-reconfigure xserver-xorg
=> Rebooted and no luck :(
Amazing... The same 2.6.32-21-generic kernel, but one with clean
install
Hi TJ,
Please run the command 'apport-collect BUGNUMBER', which will attach several
files we need for debugging.
[This is an automated message. Apologies if it has reached you
inappropriately; please just reply to this message indicating so.]
** Tags added: needs-xorglog
** Tags added: need
** Changed in: xserver-xorg-video-ati (Ubuntu)
Status: New => Confirmed
--
[RS780 KMS] no poweroff on halt with KMS enabled
https://bugs.launchpad.net/bugs/569271
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-ati in ubunt
** Changed in: xserver-xorg-video-ati (Ubuntu)
Status: New => Confirmed
--
video from Youtube or other sites(vkontakte.ru as example) playing much slowly
than sound
https://bugs.launchpad.net/bugs/568530
You received this bug notification because you are a member of Ubuntu-X,
which is sub
I can confirm the same problem. Config: Celeron-M 1.6, intel 855GM,
Ubuntu 10.04 RC
--
10.04 rc livecd boots into black/blank screen (intel 82852/855GM graphic card)
https://bugs.launchpad.net/bugs/568779
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed
Hi Derek,
Please run the command 'apport-collect BUGNUMBER', which will attach several
files we need for debugging.
[This is an automated message. Apologies if it has reached you
inappropriately; please just reply to this message indicating so.]
** Tags added: needs-xorglog
** Tags added: n
I just added this ppa for the patch, if I ever get this problem again,
I'll post it here
--
X crashes in FindGlyphByHash
https://bugs.launchpad.net/bugs/401045
You received this bug notification because you are a member of Ubuntu-X,
which is the registrant for xserver-xorg-driver-ati.
__
Seems to be resolved in Lucid, except that it badly slows system down
--
[i845] [i915][Karmic-RC] gdm crashes in a loop after fresh install
https://bugs.launchpad.net/bugs/460315
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-int
Public bug reported:
Binary package hint: xserver-xorg-video-intel
After default upgrade to Lucid RC, xorg is very slow. It appears to be hightly
consuming cpu.
If I run a film in vlc, vlc will crash saying xorg provides insufficient
ressources.
** Affects: xserver-xorg-video-intel (Ubuntu)
For me it's not about update. I just installed fresh Xubuntu 10.04 RC
(tried Kubuntu too just to verify it's not about the distribution) using
wubi as this one happens to be a windows machine.. This one has
Logitech's Bluetooth Desktop MX5000 keyboard + mouse with Logitech's USB
Bluetooth tranceive
User system details not required.
** Changed in: xorg-server (Ubuntu)
Status: Incomplete => Confirmed
** Tags removed: needs-lspci-vvnn needs-xorglog
--
No debug symbols package for binary package xserver-xorg
https://bugs.launchpad.net/bugs/569352
You received this bug notification beca
I am not sure but could it possibly be related to the bug linked below?
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-
drivers/+bug/548362
--
Lucid Lynx: Black screen on start up, no login screen.
https://bugs.launchpad.net/bugs/567971
You received this bug notification because you a
Xorg.4.log
** Attachment added: "Xorg.4.log"
http://launchpadlibrarian.net/45184354/Xorg.4.log
--
1024x768 85Hz display resolution leads to Signal Out of Range
https://bugs.launchpad.net/bugs/559066
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed t
Xorg.5.log
** Attachment added: "Xorg.5.log"
http://launchpadlibrarian.net/45184375/Xorg.5.log
--
1024x768 85Hz display resolution leads to Signal Out of Range
https://bugs.launchpad.net/bugs/559066
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed t
** Attachment added: "Xorg.2.log"
http://launchpadlibrarian.net/45184303/Xorg.2.log
--
1024x768 85Hz display resolution leads to Signal Out of Range
https://bugs.launchpad.net/bugs/559066
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg-serv
Xorg.2.log
** Attachment added: "Xorg.2.log"
http://launchpadlibrarian.net/45184308/Xorg.2.log
--
1024x768 85Hz display resolution leads to Signal Out of Range
https://bugs.launchpad.net/bugs/559066
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed t
Xorg.3.log
** Attachment added: "Xorg.3.log"
http://launchpadlibrarian.net/45184326/Xorg.3.log
--
1024x768 85Hz display resolution leads to Signal Out of Range
https://bugs.launchpad.net/bugs/559066
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed t
i845 worked O.K. since putting retro on 4/22. Just now booted up was
doing an aptitude update with Firefox up and black screened no zebra
stripes. ssh worked so tar is attached.
Fatal server error:
Failed to submit batchbuffer: Input/output error
Does not look like the usual GPU lockup.
Jerry
On previous comment, GPU is hung see excerpt from dmesg:
[ 98.664029] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed...
GPU hung
[ 98.664048] render error detected, EIR: 0x
[ 98.664092] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns
-5 (awaiting 3401
Just fixed my own problem!
When I start the Live CD, I enter a custom configuration before Ubuntu
boots off the CD. If i type;
video=CTR-0:800x600
The screen does not go out of range! Instead it sets the resolution to
the correct 1024x768!!!
This is with the Ubuntu 10.04 RC Live CD!
Not sure i
Public bug reported:
Guys,
I've just upgraded my system from Ubuntu 9.10 to 10.04RC. Before I had
done that my video were ok with a drive I had got from ATI site (ati-
driver-installer-10-3-x86.x86_64.run).
After upgrade I can't anymore neither install this driver, nor that
official package that
Yes... at least it's move now, But.. how manage the settings
With Hal it uses .fdi thing, And now ???
If uses Xorg.conf an example please...
If I try to use xinput set-mode 9 RELATIVE gives me..
m...@r2-d2:~$ xinput set-mode 9 RELATIVE
X Error of failed request: BadMatch
The following attachments are from a boot from lucid-desktop-i386.iso
20101419.1 md5sum 7dfb5e07be1cebddb4a144889273c25a. (My previous apport
attachments were from the working Karmic installation.)
** Attachment added: "lucid-dmesg output"
http://launchpadlibrarian.net/45190625/lucid-dmesg.txt
** Attachment added: "lucid lspci output"
http://launchpadlibrarian.net/45190663/lucid-lspci.txt
--
lucid beta 2 live shows black screen
https://bugs.launchpad.net/bugs/557744
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-in
** Attachment added: "lucid /proc/modules"
http://launchpadlibrarian.net/45191023/lucid-procmodules.txt
--
lucid beta 2 live shows black screen
https://bugs.launchpad.net/bugs/557744
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-v
** Attachment added: "lucid lsusb output"
http://launchpadlibrarian.net/45190741/lucid-lsusb.txt
--
lucid beta 2 live shows black screen
https://bugs.launchpad.net/bugs/557744
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-in
** Attachment added: "lucid /proc/cpuinfo"
http://launchpadlibrarian.net/45190768/lucid-proccpuinfo.txt
--
lucid beta 2 live shows black screen
https://bugs.launchpad.net/bugs/557744
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-v
** Attachment added: "lucid /proc/interrupts"
http://launchpadlibrarian.net/45191007/lucid-procinterrupts.txt
--
lucid beta 2 live shows black screen
https://bugs.launchpad.net/bugs/557744
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-
** Attachment added: "lucid xdpyinfo output"
http://launchpadlibrarian.net/45191072/lucid-xdpyinfo.txt
--
lucid beta 2 live shows black screen
https://bugs.launchpad.net/bugs/557744
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-vi
** Attachment added: "lucid /var/log/Xorg.0.log"
http://launchpadlibrarian.net/45191084/lucid-Xorg.0.log
--
lucid beta 2 live shows black screen
https://bugs.launchpad.net/bugs/557744
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-
** Attachment added: "lucid xrandr --verbose output"
http://launchpadlibrarian.net/45191271/lucid-xrandr.txt
--
lucid beta 2 live shows black screen
https://bugs.launchpad.net/bugs/557744
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-x
Hi Attila, is your 10.04 RC installed via live session, or upgraded from
9.10?
--
10.04 rc livecd boots into black/blank screen (intel 82852/855GM graphic card)
https://bugs.launchpad.net/bugs/568779
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to x
The bug number means the number of this bug, i.e. 568681.
So just try to run apport-collect 568681.
--
Bug with the logo's boot with Intel chipset
https://bugs.launchpad.net/bugs/568681
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-v
*** This bug is a duplicate of bug 561263 ***
https://bugs.launchpad.net/bugs/561263
** This bug has been marked a duplicate of bug 561263
Composition doesn't start with fglrx
--
System settings - Compositing is not supported on your system.
https://bugs.launchpad.net/bugs/569301
You rece
FYI, I can't boot into 2.6.32-21 recovery mode, it's also stucked.
I guess you can confirm again if you are reporting from 2.6.31-19/20 or
2.6.32-21, since they make big difference.
For me 2.6.31-20 seems to be problematic too.
--
xserver fails to start after splash, screens turns black, no res
*** This bug is a duplicate of bug 568779 ***
https://bugs.launchpad.net/bugs/568779
Hi alex, I have added the PPA as you told, however the 2.11 driver
depends on libdrm-intel1 >= 2.4.18+git, which is not available. Did you
also encountered this warning, or did you just ignored it and installe
Adding i915.modeset=1 to the boot line does no help either. 2.6.32-21
and 2.6.31-20 both fails. Recovery mode won't get through either.
I'm wondering if I can ever get my old installation back, or should I
just use this new installation. But it really feels bad. I should not
have chosen to upgrade
I just had the crash again...
--
X crashes in FindGlyphByHash
https://bugs.launchpad.net/bugs/401045
You received this bug notification because you are a member of Ubuntu-X,
which is the registrant for xserver-xorg-driver-ati.
___
Mailing list: https:/
Regarding my comment in #7, I've been running for the last 4 days
without problems after disabling KMS (radeon.modeset=0).
So I'm inclined to agree that the problem is down at the kernel level
rather than in the driver itself.
--
[RV710 & RV730] X freezes starting on 10th April
https://bugs.laun
Public bug reported:
After updating xorg-driver-fglrx to 2:8.723.1-0ubuntu3, the machine
previously exhibiting the behaviour described in bug #560570 (running
10.04 beta) now fails to load libfglrxdrm.so and reverts to vesa. I
presume this is an update error unrelated to the problem defined in the
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/45203332/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/4520/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/45203334/Dependencies.txt
** A
/usr/bin/X is just a small security wrapper to the real binary and debug
symbols are not needed for it, the debug symbols for the server that you
want are in xserver-xorg-core-dbg(sym)
** Changed in: xorg-server (Ubuntu)
Status: Confirmed => Won't Fix
--
No debug symbols package for binar
You have been subscribed to a public bug:
Ubuntu Lucid Lynx, kernel 2.6.32.xx
Zooming in with Super+Scroll causes the screen to become very dark,
practically unreadable. Adjusting Fn+Brightness doesn't fix this,
although I can tell the brightness changing slightly. The same thing
happens when cha
I am also experiencing the symptoms this bug describes. I'm currently
running a fully updated Lucid system with 1:6.13.0-1ubuntu5 of the
ati/radeon open source driver. If I switch to a virtual tty, kill
compiz, then switch back to my X session and restart compiz,
functionality is restored. Bryce
Looks like I finally found the explanation...
My upstream bug was pretty quickly marked a duplicate of another bug and within
that bug's comments I found this tip:
Go to Compiz settings (compizconfig-settings-manager), in there to general
settings and deselect Lighting.
That fixed the issue for
I can confirm that 2.6.32-21 freezes X completely. A low resolution
flash screen warning about HD check shows a few seconds, then the screen
flashes, goes blank and then freezes completely. The only thing to do
then is a hard reboot. 2.6.32-20-generic works, but boots slower than
before.
--
xserv
*** This bug is a duplicate of bug 286424 ***
https://bugs.launchpad.net/bugs/286424
I'm having the same problem, on ubuntu 9.10, the section device is like
in this bug recommend and the problem persist
Section "Device"
Identifier "Default Device"
Option "NoLogo"
That`s not only Ubuntu`s bug. I use Fedora, so, I`ve noticed this bug in
Fedora10. It has came with some of last updates of x11-libs. And this
bug is still presented in Fedora12. May be this info will help you to
find out the buggy version of libs/data. Or to developers of a buggy
package.
--
lib
I am running ubuntu 10.04 RC.
When I was in BIOS v1.10 the "nomodeset acpi_backlight=vendor" parameter
would fix the problem.
Now I upgraded to BIOS v2.31 and I have all these issues. Can we get a
changelog on the BIOS?
--
[gm45] Adjusting Brightness in Acer Aspire Timelines causes system freez
Okay, here's what I found.
When I boot into recovery mode, the nvidia module is already loaded, but
the device nodes don't exist. I then unload and reload the nvidia
module. Nothing special happens, except for the warning "WARNING: Could
not find old name in /lib/modules/2.6.32-19-generic/updates/
This is a log from a case where X failed to start properly.
** Attachment added: "This is a log from a case where X failed to start
properly."
http://launchpadlibrarian.net/45213829/failed_log
--
after upgrade to lucid, xorg frequently fails to start properly using
nvidia-current
https://bu
This is a log from a case where X started up normally.
** Attachment added: "This is a log from a case where X started up normally."
http://launchpadlibrarian.net/45213971/succeeded_log
--
after upgrade to lucid, xorg frequently fails to start properly using
nvidia-current
https://bugs.launc
Public bug reported:
Binary package hint: xserver-xorg-video-nouveau
Lucid release candidate, Nividia Riva TNT2 video card, Dell 1905FP LCD
monitor: nouveau driver sets the highest screen resolution at 1024 x 768
when the highest (and optimal) resolution is 1280 x 1024. The nv driver
set the res
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/45213780/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/45213781/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/45213782/Dependencies.txt
** A
I confirm that same issue occurs for my thinkpad x31 after upgrading to
10.04 beta-1. Screen freezes randomly, displays coloured vertical and
horizontal bars. Reset required after crash.
--
screen corruption : multiple cases : fast scrolling firefox error console -
fast mouse movement - sometime
Canonical should be looking out for their Users! and the Linux Foundation
should too!
I did read something that "In November 2009, the Linux Foundation released the
details of a new, rewritten Linux driver that would support this chipset and
Intel's other upcoming chipsets. The Direct Render
Same problem since upgrade 10.04 beta to rc with an intel 82852/855GM
graphic card with intel celeron Mobile 1.4 ghz. On blank screen kernel
magic shortcut ALT PRINT SCREEN R + E + I + S + U +B for clean restart
don't work.
Same problem on livecd or installed on disk.
But starting in recovery mod
bcrowell: You must be using a apt mirror that has not been updated in
quite some time, please change it to one of the primary mirrors (like
http://archive.ubuntu.com/ubuntu) and update with sudo apt-get update
and then sudo apt-get dist-upgrade. Do you have /usr mounted on a
seperate partition? Thi
On Sat, Apr 24, 2010 at 1:55 AM, Calvin.Ngei wrote:
> *** This bug is a duplicate of bug 568779 ***
> https://bugs.launchpad.net/bugs/568779
>
> I googled "Dell Latitude X300" and found that the graphic card of it is
> intel integrated graphics card (Intel Extreme Graphics 855 GM), the same
> g
Thank you for taking the time to report this bug and helping to make Ubuntu
better. We are sorry that we do not always have the capacity to look at all
reported bugs in a timely manner.
There have been many changes in Ubuntu since that time you reported the bug and
your problem may have been fix
Well it gets more confusing! Both logs show the device nodes created.
Are you *sure* the failed_log isn't accidentally a successful run?
After sed-ing out the differences in dates and times a diff doesn't show
much difference aside from echoing of the commands in the
successful_log.
sed -i -e 's
Thank you for taking the time to report this bug and helping to make Ubuntu
better. We are sorry that we do not always have the capacity to look at all
reported bugs in a timely manner.
There have been many changes in Ubuntu since that time you reported the bug and
your problem may have been fix
Thank you for taking the time to report this bug and helping to make Ubuntu
better. We are sorry that we do not always have the capacity to look at all
reported bugs in a timely manner.
There have been many changes in Ubuntu since that time you reported the bug and
your problem may have been fix
For normal boot you can fix temporarily the problem until the bug fixed
by changing your "/etc/X11/xorg.conf" by this (this is the failsafe
conf) :
Section "Device"
Identifier "Configured Video Device"
Driver "Vesa"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Se
** Changed in: nvidia-graphics-drivers (Ubuntu)
Assignee: (unassigned) => TJ (intuitivenipple)
--
after upgrade to lucid, xorg frequently fails to start properly using
nvidia-current
https://bugs.launchpad.net/bugs/561049
You received this bug notification because you are a member of Ubuntu
Thank you for taking the time to report this bug and helping to make Ubuntu
better. We are sorry that we do not always have the capacity to look at all
reported bugs in a timely manner.
There have been many changes in Ubuntu since that time you reported the bug and
your problem may have been fix
Thank you for taking the time to report this bug and helping to make Ubuntu
better. We are sorry that we do not always have the capacity to look at all
reported bugs in a timely manner.
There have been many changes in Ubuntu since that time you reported the bug and
your problem may have been fix
1 - 100 of 181 matches
Mail list logo
