If you want to support a new mode(i.e. 1024x600@60), add it to your code, and
let that mode to be default.
See my reply on #75, #82, #84, #93, #95.
Thanks,
Frank
> -Original Message-
> From: boun...@canonical.com [mailto:boun...@canonical.com] On Behalf Of
> Anewangelfades
> Sent: 2011年5
As I said before, when the geode LX is designed, no wide screen panel
appears on the market. So the HW registers does not include the support
for that type panel. We use reversed entry 7 for people who want to use
this special wide resolution. And our HW has the ability to support this
1024x...@80
X log on Malata notebook(1024x600)
** Attachment added: "X log on Malata notebook(1024x600)"
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-geode/+bug/433142/+attachment/1740782/+files/Xorg.0.log
--
geode driver do not display 1024x600 on (K)UNR Karmic
https://bugs.launchpad.ne
Screen after X window enters(1024x600)
** Attachment added: "Screen after X window enters(1024x600)"
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-geode/+bug/433142/+attachment/1740783/+files/screen.png
--
geode driver do not display 1024x600 on (K)UNR Karmic
https://bugs.laun
Martin,
I think you have not successfully use entry 7. From your log, I see no clue
entry 7 is used. If that entry is not used, why you get the conclusion that
ugly hack result?
On my malata platform(a geodeLX) notebook and another user's reply, there is
no error at all using this mode(102
Martin,
Have you noticed that your Xorg_ec800_3.log still shows:
(II) GEODE(0): VSA Panel Mode is: 800x600, pixel clock freq(kHz) is 4.
If you set ret=7, it should show as below:
(II) GEODE(0): VSA Panel Mode is: 1024x600, pixel clock freq(kHz)...
My 1024x600 entry is not used in your new t
I figure out the reason from your log.
Please see the line in the log:
(II) GEODE(0): VSA Panel Mode is: 800x600, pixel clock freq(kHz) is 4
The platform ret value is 2. So entry 2 will be used(800x...@60). When this
entry is used, most of the modes will be prunde by X server. And you will
Martin, the patch for printing the panel mode to X log has been committed to
mail list. Please check. Actually in my previous patch, I have added note that
explains why I use entry 7. I think you have seen that.
Yes, in the function LXGetLegacyPanelMode(), we firstly check if panel is
supported.
Please help check ret value in function LXGetLegacyPanelMode() in lx_panel.c.
If that ret value is 3, the patch I commit will not affect the resolution the
panel supports.
If that ret value is 7, my patch will take effet.
Thanks,
Frank
--
geode driver do not display 1024x600 on (K)UNR Karmic
h
phpmonkey,
You can use "cvt 1024 600 80" to generate the parameter, then write this
command value to replace my patch below:
+{MODEPREFIX, 48960, 1024, 1064, 1168, 1312, 0, 600, 601, 604, 622, 0,
+ V_NHSYNC | V_NVSYNC, MODESUFFIX}
+, /* 1024x...@60
Thanks for your reply. From your log file,
(**) GEODE(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5
kHz, 59.9 Hz
(II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(**) GEODE(0): Driver mode "1024x600": 49.0 MHz (scaled f
phpmonkey,
I am glad that you can get the 1024x600 resolution for your panel without
the modeline in xorg.conf.
As you said, there are two issues remaining here:
1) The remaining resolution options are reduced. Your remaining options turn
to be two. And on my notebook, there are 3 optio
phpmonkey,
If you can not get 1024x600 still, see below:
Another point you need to pay attention is that the default screen
resolution for PANEL is set by VBIOS. So please check your VBIOS setting for
this. The very simple way is that in function LXGetLegacyPanelMode() in
lx_panel.c, pri
this patch works fine on my LX notebook. It also uses Panel as the
output monitor. So I think it can work too on phpmonkey's set. It is
pity that I don't have one set EC800, so we must wait users' feedback.
So be patient to wait phpmonkey's reply.
--
geode driver do not display 1024x600 on (K)UN
Jenny,
Thanks for your reply.
Please try my patch attached with lastest driver from freedesktop.
Delete the xorg.conf and give a try to see if you can get 1024x600 by
default. If that can work for you, I will explain the patch intention. I have
validated this patch alreandy on my Note
I don't know in which stage you are in. Can you get this resolution on your
panel? It works fine for me.
I use Xserver 1.9 and latest geode driver on freedesktop.
--
geode driver do not display 1024x600 on (K)UNR Karmic
https://bugs.launchpad.net/bugs/433142
You received this bug notification be
** Attachment added: "configuration file"
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-geode/+bug/433142/+attachment/1647720/+files/xorg.conf
--
geode driver do not display 1024x600 on (K)UNR Karmic
https://bugs.launchpad.net/bugs/433142
You received this bug notification bec
phpmonkey,
I have one set LX notebook can can set it to 1024x600 resolution.
Please see my attached xorg.conf and xorg.conf.
** Attachment added: "Log file"
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-geode/+bug/433142/+attachment/1647719/+files/Xorg.0.log
--
geode drive
phpmonkey,
If I am not mistaken, you can not get the modeline resolution setting in
xorg.conf after you boot?
If you want to add one resolution in xorg.conf and use that in desktop, you
can try to rever the commit on
http://cgit.freedesktop.org/xorg/driver/xf86-video-geode/commit/?id=e94
** Changed in: xserver-xorg-video-geode (Ubuntu)
Status: Fix Committed => Fix Released
--
Geode driver not display Screensaver
https://bugs.launchpad.net/bugs/570584
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-geode in
This issue should be solved by 2.11.9.
http://cgit.freedesktop.org/xorg/driver/xf86-video-geode/commit/?id=f0e24491ca676244b2fd6f2d4476e996847824cd
Based on what I know, Bernie has the same issue. it seems find now.
Thanks,
Frank
--
xf86-video-geode segfault with NoAccel option
https://bugs.lau
2.11.9 have solved the screensaver issue.
Closed.
** Changed in: xserver-xorg-video-geode (Ubuntu)
Status: Confirmed => Fix Committed
--
Geode driver not display Screensaver
https://bugs.launchpad.net/bugs/570584
You received this bug notification because you are a member of Ubuntu-X,
whi
Got the update here.
Can you please consult Otavio and work with him to make it available in our
Cimarron library instead of xorg.conf?
Thanks,
Frank
--
geode driver do not display 1024x600 on (K)UNR Karmic
https://bugs.launchpad.net/bugs/433142
You received this bug notification because you a
I have reproduced this issue on Fedora12.
It's also Xserver 1.7. No icons on the desktop.
Frank
--
No icons on Geode thin client
https://bugs.launchpad.net/bugs/520671
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-geode in ubun
24 matches
Mail list logo