Hi,
I'm having this issue as well. Here's my hardware:
i...@ubulaptop:~$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
i...@ubulaptop:~$ arecord -l
List of CAPTURE Hardware Devices
card 0: Intel [HDA Intel], device 0: STA
ok... I plugged a pair of headphones into my front microphone jack and
that gives input on Microphone 2. I can record sound and play it back.
Microphone 1 still does not work. Note that I had to toggle all the
input switches on gnome-soundmixer and switch the input to Microphone 2
under gnome so
The wizard is no longer working for me at all. If I run it from a console, the
error is now:
i...@ubulaptop:~$ bluetooth-wizard
(bluetooth-wizard:4699): GLib-GObject-WARNING **: cannot register
existing type `BluetoothClient'
(bluetooth-wizard:4699): GLib-CRITICAL **: g_once_init_leave: assert
My system is up-to-date as far as I can tell and I have this problem
too:
i...@ubulaptop:~$ apt-cache policy gnome-bluetooth
gnome-bluetooth:
Installed: 2.27.90-0ubuntu1
Candidate: 2.27.90-0ubuntu1
Version table:
*** 2.27.90-0ubuntu1 0
500 http://mirrors.rit.edu karmic/main Package
I get a similar message with bluetooth-properties:
i...@ubulaptop:~$ bluetooth-properties
** (bluetooth-properties:12151): WARNING **: Could not open RFKILL
control device, please verify your installation
(bluetooth-properties:12151): GLib-GObject-WARNING **: cannot register
existing type `Bluet
*** This bug is a duplicate of bug 430071 ***
https://bugs.launchpad.net/bugs/430071
** This bug has been marked a duplicate of bug 430071
no network since last update
--
network-manager no longer starts automatically
https://bugs.launchpad.net/bugs/430405
You received this bug notificati
This is the same as Bug #430405. Network manager does not start
automatically anymore. I'm not familiar with the upstart system, but
"sudo start network-manager" gets everything up and running. However,
it doesn't work on the next boot. From the /etc/init/network-
manager.conf file, it should s
it's working for me in lucid
--
ALC861 : Mic does not work after installation
https://bugs.launchpad.net/bugs/434511
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.
I get slightly different error message about being unable to open a
library:
$ bluetooth-properties
** (bluetooth-properties:19667): WARNING **: error opening /usr/lib
/gnome-bluetooth/plugins/libnma.so: libnm-glib-vpn.so.0: cannot open
shared object file: No such file or directory
** (bluetooth
This fix (setting to Analog duplex) doesn't work for me, neither does the
options position_fix=1 in alsa_base.conf. I can get microphone 2 to work by
plugging in something to the front mic jack, but microphone 1 never picks up
any sound.
On Sat, Sep 26, 2009 at 8:18 PM, Paulo Tanimoto
wrote:
>
Seems to work for me... Here's the relevant portion from a python -v
shell and import pylab:
import matplotlib.backends # directory
/usr/lib/pymodules/python2.7/matplotlib/backends
# /usr/lib/pymodules/python2.7/matplotlib/backends/__init__.pyc matches
/usr/lib/pymodules/python2.7/matplotlib/bac
Solution in #29 fixed it for me. I already had the client lanman auth =
yes from 11.10 to get it to work. It was the ntlmv2 line that was
needed for 12.04. I am connecting to a netgear Nv+ NAS.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed t
I have this problem with a Brother HL-5250DN printer also. Don't know
if it's related, but I get an info message in the printer properties
dialog that the Toner is empty. However, that shouldn't be a problem
since it was changed fairly recently.
--
You received this bug notification because you
Here's the one that works from the Foomatic/pxlmono driver, but it's a
binary file
** Attachment added: "printout from pxlmono driver"
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/950713/+attachment/2857968/+files/printout-works
--
You received this bug notification because you are a
Using the files above, I can print the 11.10 file with
> lpr -P Brother-HL-5250DN-series -oraw printout-11.10
but not
> lpr -P Brother-HL-5250DN-series -oraw printout-12.04
Again, I don't know if it's meaningful, but there is quite a delay with
the working file (like the printer is parsing data) a
See comment #26 for the file. There were posts while I was finding the
file to attach.
Ian
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/950713
Title:
Brother printer fails to print anything but a
That last printout-12.04.ps (#48) printed out ok for me using the
Brother HL-5250DN BR-Script3 driver and an lpr command (sorry don't know
the right address and port of the printer, I connect with dnssd).
Ian
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Till,
The command was:
> lpr -P Brother-HL-5250DN-series -oraw printout-12.04.ps
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/950713
Title:
Brother printer fails to print anything but a blank pag
I still have this problem with:
Compiz 0.9.7.0 (1:0.9.7.0+bzr3035-0ubuntu1)
unity 5.6.0 (5.6.0-0ubuntu4)
Linux ubuntu 3.2.0-18-generic #29-Ubuntu SMP Fri Mar 9 21:36:08 UTC 2012 x86_64
x86_64 x86_64 GNU/Linux
Both the maximize bug to wrong monitor on multi-monitor displays and the
maximize to wr
I can confirm and reproduce Bruce's problem with gedit. Otherwise things
seem to be working on the HL5250
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/950713
Title:
Brother printer fails to print a
None of them worked. #2 and #5 had the header and no text or weird
dots/dashes. The others all had the same dots/dashes. All of them
printed out 2 pages on my HL5250DN printer using the Brother-HL-5250DN
BR-Script3 driver.
Ian
--
You received this bug notification because you are a member of Ubu
Neither nocache file worked (got dots and dashes).
I used the following commands to test:
lpr -P Brother-HL-5250DN-series -oraw
Downloads/printout-uncompressed-nocache-02.ps
I guess the -oraw ignores the ppd file and sends it unfiltered... sorry
for not really understanding what I was doing.
I
Yep... the header was present in all of them. I have the same issue
printing from Geany, though the only thing not lines and dashes are the
header box and side line for the line numbers. I'll attach that printout
in case that helps with anything.
Ian
** Attachment added: "Printout from Geany"
Hi,
Just tried printing the above files(#28), In the first
(brother-t3-font-01.ps), I get a mostly empty page with two lines at the
bottom (1:) and (2:) and 3 repeats of _ _ triangleglyph squareglyph
The second file gives two pages, the first is blank except for the gedit
header. The second does
Looks the same. No A's just _ _ triangle square
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/93
Title:
12.04 Beta 1: Brother MFC8680DN cannot print text file
To manage notifications about this
I get the same thing as Richard (#33)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/93
Title:
12.04 Beta 1: Brother MFC8680DN cannot print text file
To manage notifications about this bug go to
I'm on a laptop and can't stand this feature! I have to move my mouse
against the edge several times sometimes if the algorithm thinks I
didn't hit it hard enough. That's with the sensitivity turned all the
way up!
Bad enough you took away dodge windows functionality. Please make this
work at l
I 100% agree... I can't stand the new algorithm for the auto-hide since
it relies on moving the mouse past the edge to activate. I have tried
turning up the sensitivity, but still have to hit the side more than
once! I want my dodge windows/intellihide back!
So far every other part of the new un
Found the setting using ccsm to manually make this happen. In the
experimental tab of the unity plugin turn the "Launcher Reveal Pressure"
setting to 1. I assume that the sensitivity adjustment slider in the
system settings changes the "Launcher Reveal Edge Responsiveness" from
1-8, which the tool
Having the same issue on a Samsung QX411 laptop with a synaptics
touchpad
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/933355
Title:
Middle-click on MacBook Pro touchpad no longer works
To manage
Public bug reported:
Some comment authors incorrectly state problems with packages or have
other issues that may be easily addressed, but they do not use support
resources and leave negative comments instead. Package owners should
have ability to contact them privately to address issues and provid
I have this bug as well, usually I observe it after suspending my laptop for a
long period of time (closing the lid). I'm running Oneiric with
xserver-xorg-video-intel:
Installed: 2:2.15.901-1ubuntu2
Candidate: 2:2.15.901-1ubuntu2
Version table:
*** 2:2.15.901-1ubuntu2 0
500 http://
I'm testing it now (3.1-rc10)... so far so good but I want to keep
testing it for a couple of days since it sometimes seemed a little
random. Also, turns out my grub wasn't updating properly before and I
never realized I wasn't running an up-to-date kernel (2.6.38-8.42) so
this may have been fixe
I'm now running Oneiric beta2 and it seems PIL is working again. I can
load my TIF images now just fine. Creating a YCbCr image seems to work
ok too.
Can anyone confirm this? Or is it just me?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
This is affecting me as well and not giving a good impression of linux
and libreoffice to my boss who is the user of endnote citations in a
paper we are working on together. Please see my attached crash report.
The document saves just fine in .odt and as a pdf (at least) but I am
going to be force
Public bug reported:
When a dual-monitor display with different resolutions are used, if a
large window is moved from the large display to the small display
(completely) and then maximized, it is maximized in the large display
rather than the smaller monitor. This doesn't happen if the size of th
unity:
Installed: 5.4.0-0ubuntu2
Candidate: 5.4.0-0ubuntu2
Version table:
*** 5.4.0-0ubuntu2 0
500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages
100 /var/lib/dpkg/status
** Tags added: multi-monitor
** Tags added: unity
--
You received this bug notifica
** Package changed: ubuntu => unity (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/948107
Title:
Maximize window on multi-monitor display puts it on the wrong monitor
To manage notification
Here's a video of the behavior. Sometimes it actually does work properly.
Usually this occurs after snapping the window to half the monitor and then
resizing across the desktop (see ~1.5-2min), however I can't consistently
reproduce it or sometimes get it to go back to the buggy behavior. Hop
*** This bug is a duplicate of bug 776435 ***
https://bugs.launchpad.net/bugs/776435
Is this really a duplicate of bug #776435? The windows aren't being
maximized to the wrong workspace, but to the wrong monitor on the same
workspace in a dual-monitor setup. You also don't need the window to
I haven't had the issue occur since I changed one setting in ccsm
animations plugin: Focus Animation>Focus Effect>None. Previously it was
N/A which seemed very strange to me so I changed it. Now there isn't even
an N/A in the selection box. Haven't had a white box since then (couple of
days).
Ian
I'm calling this fixed using kernel3.1-rc10! I haven't had one lockup
like I experienced before. Thanks for the great work. Modified the
tags as requested.
** Tags removed: needs-upstream-testing
** Tags added: kernel-fixed-upstream-v3.1-rc10
--
You received this bug notification because you
I have this issue too with some custom scripts that reads the intensity data
from a grayscale TIF image of the output of a CCD detector (7_WAXS) and then
radially averages. Occurs with python2.6 as well. Another TIF image from a
different type of detector works, but I'm not really sure of the
** Attachment added: "Image that doesn't work"
https://bugs.launchpad.net/ubuntu/+source/python2.7/+bug/717843/+attachment/1968581/+files/7_WAXS
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/717843
** Attachment added: "Image that works"
https://bugs.launchpad.net/ubuntu/+source/python2.7/+bug/717843/+attachment/1968583/+files/7_SAXS
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/717843
Title
I just tried installing the 1.1.7-3 build for Oneiric(python-
imaging_1.1.7-3ubuntu1_amd64.deb) which includes the above Fedora patch
(I think) on my Natty installation and I get the same buffer overflow.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is sub
Adding my user account to the video group allowed the settings to take
affect (I needed to do this to get glx running). I am now able to get
smaller icons and can get the opacity to change. However, when I choose
the experimental tab I still get a dialog that ccsm crashed
unexpectedly- but there'
This was working before a recent update to python-matplotlib a day or so
ago. I'm now running 0.99.3-1ubuntu3 also
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/752647
Title:
"import pylab" in a py
I also couldn't build PIL from source on Natty, but installing the
Maverick python-imaging deb file works for python2.6 on Natty. Don't
like to mix-n-match, but have to have this for work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubunt
49 matches
Mail list logo
