I have the same problem, but i'm on a Dell XPS13-9350 with BCM4350
(installed it myself before the dev edition came out). I have a headset
Jabra Evo, that used to work fine in 15.10, stutters on 16.04.1 and does
not detect on 16.10. I also have trouble with an other headset, a
plantronics voyager l
Public bug reported:
There seems two problems
1) libperl-dev:i386 just conflicts with native libperl-dev. So apt-get install
libperl-dev:i386 automatically removes libperl-dev
2) Even after this it still won't install due to conflict of dependent
libperl5.22 packages (that required for Perl itse
I also found out the issue exits while on 16.04.2 and upgrading to the hwe. It
happened after the install of package
xserver-xorg-hwe-16.04
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1633821
Title
I think i am affected due to this bug too, XPS13-9350 with 16.04.2. I
didn't have the bug until i went to the linux-generic-hwe-16.04, with
kernel 4.8.
will the patch be included in patches for 16.04?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
*** This bug is a duplicate of bug 1451728 ***
https://bugs.launchpad.net/bugs/1451728
I installed 15.10 Unity and then installed the kde desktop and ran into
the same error.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https:/
I have the same problem.
CIFS drive does not mount at boot, but works OK after sudo mount -a.
After checking the dmesg output, found the following:
[ 21.401090] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
[ 21.409315] r8169 :0e:00.0 enp14s0: link down
[ 21.409391] IPv6: ADDRCONF
*** This bug is a duplicate of bug 1570556 ***
https://bugs.launchpad.net/bugs/1570556
I'm seeing this behaviour on a freshly installed 16.04 unity and on a
different freshly installed 16.04 MATE.
I did install;
sudo apt-get install openvpn
sudo apt-get install network-manager-openvpn
sudo ap
*** This bug is a duplicate of bug 1570556 ***
https://bugs.launchpad.net/bugs/1570556
actually the error it gives me in MATE is;
The file 'den...@sslvpn.intramedonline.nl.ovpn' could not be read or does not
contain recognized VPN connection information
Error: the plugin does not support impo
I too experience this problem, can't rename files/dirs in nautilus, when
typing a letter it behaves like an enter. Like mentioned here:
https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/1385292
On 16.04 with Dell XPS13-9350, disabling ibus did not resolve it for me.
I have a Dell T3240 and there
I too experience this problem, can't rename files/dirs in nautilus, when
typing a letter it behaves like an enter. On 16.04 with Dell XPS13-9350,
disabling ibus did not resolve it for me. I have a Dell T3240 and there
it just runs fine. I'm guessing it has to do something with the input,
like touch
Public bug reported:
I have a XPS13-9350 system and even though the highest resolution was
available (3200x1800), my preferered resolution (2560x1440) wasn't
available anymore after i upgraded from 16.04 to 16.10.
I resolved it by manually adding the resolution with xrandr, described here;
http:/
Confirmed on 16.10 as well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1579546
Title:
Caffeine Crashes on startup
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/
** Attachment added: "Partial details picture"
https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1635221/+attachment/4764301/+files/Screenshot%20at%2013-31-30.jpg
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.laun
Public bug reported:
If i update from unity through the gui option and click details, i only
see partial details. I think it's a minor bug/issue, but i'm guessing
all help is welcomed. I have a screenshot, i will attach it later.
ProblemType: Bug
DistroRelease: Ubuntu 16.10
Package: unity 7.5.0+1
I'm sorry, but im a newbie, but how does this fix get into the ubuntu
versions? Do we have to wait until network-manager-openvpn (Ubuntu) gets
assigned?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/60
Silvio, it does not work for me.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1544480
Title:
after upgrading to 16.04 (xubuntu) network drive not mounted
To manage notifications about this bug go
Hi there,
It looks like the patch downloads the firmware from
"www.lwfinger.com/b43-firmware", I'm a bit curious where the firmware
comes from and is it trustworthy? (I know that linuxwireless.org does
have this link, but still ...)
D.
--
You received this bug notification be
I think it should generally not be possible for FUSE to lock processes
like this.
One thing I did to improve the situation was to reduce the ssh timeout:
echo ServerAliveInterval 30 >> ~/.ssh/config
But I think in my case usually the ssh connection is really hung (though
the network connection st
I have two "hotfixes"/workarounds:
Once you encounter the problem:
fusermount -u -z mountpoint (directly, don't use TAB!)
echo ServerAliveInterval 15 >> ~/.ssh/config
Then after 15 seconds your system should come back to life.
--
computer freezes when sshfs blocks waiting for connection
https:
Public bug reported:
Binary package hint: openoffice.org
OO 3.2.0 Impress (1:3.2.0-7ubuntu4.1)
1. Open a new presentation.
2. View Master Slide
3. Change Page Size to Custom: 14,80 cm x 10,00 cm landscape.
4. The lower text box now has a size that fits inside the page. (e.g. 14,00 x
6,80 cm)
5.
** Attachment added: "test slide which was saved accordingly."
https://bugs.launchpad.net/bugs/641175/+attachment/1597530/+files/testslide.odp
--
OpenOffice Impress disregards Master Slide after Saving
https://bugs.launchpad.net/bugs/641175
You received this bug notification because you are
I have a similar issue with the box size of the master slide:
https://bugs.launchpad.net/ubuntu/+source/openoffice.org/+bug/641175
--
changes to impress master slide footer font style/size not saved
https://bugs.launchpad.net/bugs/577272
You received this bug notification because you are a member
Actually the whole thing works without a master Slide as well:
1. Open a new presentation.
2. Change the page layout to smaller (14,8 x 10 cm).
3. Save the file and reopen.
4. Create new page.
5. The new page now has a text box twice the size of the page heigth.
--
OpenOffice Impress disregards
It works also with e.g. C6 envelope. Save, Reopen, Create a new slide
and the box is much too large.
** Attachment added: "Test slide with Page Size C6 Envelope"
https://bugs.launchpad.net/ubuntu/+source/openoffice.org/+bug/641175/+attachment/1597674/+files/test3.odp
--
OpenOffice Impress di
Even easier:
Open a new file. Change page size to C6 Envelope. Save. Close. Open. Change
Layout. The Boxes are very high.
--
OpenOffice Impress disregards Master Slide after Saving
https://bugs.launchpad.net/bugs/641175
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: "Empty C6 Envelope Page -- Change Layout to find Bug"
https://bugs.launchpad.net/ubuntu/+source/openoffice.org/+bug/641175/+attachment/1597677/+files/test4.odp
--
OpenOffice Impress disregards Master Slide after Saving
https://bugs.launchpad.net/bugs/641175
You received
The problem is the same in version 1:3.2.1-6ubuntu1 from maverick.
--
OpenOffice Impress disregards Master Slide after Saving
https://bugs.launchpad.net/bugs/641175
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
I'm on 15.04 and i experienced this as well
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/858200
Title:
atop crashed with SIGSEGV in __libc_start_main()
To manage notifications about this bug go to
Ok, so i checked. "copy to texture" is on in compiz configuration
manager.
And i installed gnome flashback;
http://www.webupd8.org/2014/04/how-to-install-and-tweak-gnome.html
It seems gnome flashback-metacity does work. alle the other options
(gnome/gnome-compiz) do not work.
For me it's not an
I'm on 15.04, coming from 14.10 and none of the workarounds work for me.
I just start the openvpn connection through the cli.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1297849
Title:
[SRU] Virtu
Public bug reported:
I've tried to install several different version of the library from the ubuntu
repositories, but it did not help. I've also tried
apt-key net-update
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: ubuntu-release-upgrader-core 1:0.220.7
ProcVersionSignature: Ubuntu 3.1
I got around this problem by installing libgbm1-lts-utopic. This
probably causes other issues, but oh well, let's see.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1431714
Title:
[xorg-edgers] Held
Hi, sorry it took a while, i wasn't home for a while.
I have some news to report;
- I've updates the bios to A08, 03/03/2015 (the output from dmidecode), but if
i connect the laptop (with the laptopscreen enabled) to the 2x 4k screens, it
just logs me out.
- I've found that if i disable the lapt
Yes it does. I attached the file to this post.
also, i found out that working with the 2x 4k screens (and the laptop-
builtin-screen disabled), it goes into slumber or powerdown mode. If it
does, i can't succesfully get it out and have to restart the machine.
I'm gonna test some more on that, but
I'm closing this bur report as i created a new one as requested by panelvch;
https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1459613
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1455598
Title:
** Information type changed from Private to Public
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1459613
Title:
connecting 2x 4k screens on a Dell XPS12 (9Q33): compiz crashed with
SIGSEGV in GLTe
er the weekeind because we have a
big network migration today and the whole weekend.
D
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1459613
Title:
connecting 2x 4k screens on a Dell XPS12 (9Q33): c
i too see this bug, even after installing the private fix from pavel's
ppa. I _think_ (i'm not sure) i see this bug on new wifi connections
(where i haven't connected before). do you need logs from my system too?
I'm on 15.04
--
You received this bug notification because you are a member of Ubunt
Public bug reported:
i can't, sorry
ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: libapt-pkg4.12 1.0.1ubuntu2.1
ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
Uname: Linux 3.13.0-32-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
Date: Wed Jan 14 14:11
Public bug reported:
Hi
ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: xorg 1:7.7+7ubuntu4
ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3
Uname: Linux 3.19.0-16-generic x86_64
.tmp.unity.support.test.0:
ApportVersion: 2.17.2-0ubuntu1
Architecture: amd64
CompizPlugins: No value
Public bug reported:
Hi,
I own a Dell XPS12 (9Q33) and recently i have had 2 external monitors
hooked to that through the (mini) display ports. The Screens are from
the type Dell P2815Q. The screens have the ability to use Daisy chain
(MST=>https://en.wikipedia.org/wiki/DisplayPort#Multiple_displ
*** This bug is a duplicate of bug 1455598 ***
https://bugs.launchpad.net/bugs/1455598
** This bug has been marked a duplicate of bug 1455598
connecting 2x 4k displays in ubuntu 15.04 with daisy chain displayport (MST)
--
You received this bug notification because you are a member of Ubun
*** This bug is a duplicate of bug 1315607 ***
https://bugs.launchpad.net/bugs/1315607
Confirmed on 14.10 x64
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1249813
Title:
"Status Icon Plugin" d
Public bug reported:
While using the Chrome and Firefox web browsers, Ubuntu will crash and
log me out and will not let me log back in without rebooting the
computer. This happens quite often. Most often while watching video
content, but also just while navigating through web pages. I have
repo
I'm not sure how to proceed. I think it is a bug as i still experience
this behaviour (although i seem to be the only one, but that may be
because 2x 4k screens are not that common (yet)).
But how do i reopen this bug? I can't change the status and i can't find
a closed/open button.
--
You recei
No Problem, in the light of a general cleanup it's good to just close it
to see if there are any reactions, especially when there is just one
person (=me) is reporting the bug.
Just let me know if i can test stuff. Soon i'll have another hardware
laptop to test it with, I will try to reproduce it
It worked for me too, i have installed;
Version: 0.9.10.1-0ubuntu5~fixed
I had to reboot for it to work.
I used to be on 14.10 and upgraded to 15.04. Pavel, Thanks for all the
work!!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
htt
*** This bug is a duplicate of bug 1373639 ***
https://bugs.launchpad.net/bugs/1373639
I saw that bug, but i couldn't decide if it was the same issue. I've
seen multiple bugs with "atop crashed with SIGFPE in
__libc_start_main()" but it looks to me it is a generic error like som e
sort. Obviou
I'm sorry to report the bug still occurs in 15.10. I installed a fresh
copy on my XPS13 and i had to click 13 times on VPN to start it on a
unknown wifi network. If you need my logs, let me know. I still monitor
this thread.
--
You received this bug notification because you are a member of Ubuntu
Seems my respons was lost: i gave a reply to the emailalert, but it
didn't make it to launchpad i see.
So here it is once more;
---
So, nice to have finally explained this issue, as far im concerned you can set
this bug to resolved. It gets handled nicely on a new install of 15.10 and
correc
So i tried a new clean install with 15.10 and now it works very nicely!
I'm suspecting the upgrades from 14.10/15.04 or the troubleshooting
steps have broken something.
I also got a reason why the 2x4k and 1x2k resolution does not work;
"exceeds 3D hardware limit (8191, 8192)"
I made a screenshot
Confirmed in 4.2.
My fix:
Go to the directory ubuntu/vbox/
Inside each directory (vboxsf vboxguest, ...) do
ln -s ../include/
then it will compile fine.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
*** This bug is a duplicate of bug 1321421 ***
https://bugs.launchpad.net/bugs/1321421
What command you should do int terminal to fix it? Sorry but I dont' t
understand the procedure on the linked page. Is it fixed on Ubuntu
14.10?
--
You received this bug notification because you are a memb
Public bug reported:
Hi all,
I have an issue with the update manager (on 12.04).
It used to work correctly until a couple of days ago.
When trying to launch it, it returns a message beginning by :
"Could not initialise the package information"
then the main contain is :
"
E:Encountered a secti
*** This bug is a duplicate of bug 346386 ***
https://bugs.launchpad.net/bugs/346386
Thanks a lot for the swift answer :-)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1072065
Title:
12.04 - u
Thanks for picking it up!
Versions:
Empathy 2.30.3
I'm using easypeasy, don't know what version. Ubuntu Software Center 2.0.7
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1027508
Title:
new contact
Public bug reported:
I'm using easypeasy and Ubuntu Software Center 2.0.7. I have a netbook
with built-in camera. The camera is not recognized by any software.
** Affects: empathy (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a me
well, it's all the info there is. But anyway, I'll try the newer
version. Thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1027508
Title:
new contact not remembered.
To manage notifications ab
Thanks. Cheese is already installed, but it pretends there is no webcam:
"No device found".
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1031534
Title:
Webcam not recognized
To manage notification
Well, it is the built-in camera. It used to work fine before I installed
Easypeasy, and if I recall correct it took a picture upon installing
easypeasy.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/10
Public bug reported:
After adding a new contact, logging out and then logging in again, the
new contact is gone.
Maybe related to:
After adding a new contact it appears in the contact list, but always as
offline, and messages are sent nor received.
And this maybe related to:
New contact reques
Public bug reported:
Ubuntu “gnome-system-monitor” package Bugs Report a bug about “gnome-
system duh! u kno
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: gnome-system-monitor 3.2.1-0ubuntu1
ProcVersionSignature: Ubuntu 3.0.0-14.23-generic 3.0.9
Uname: Linux 3.0.0-14-generic i686
ApportVe
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/914429
Title:
help menu went insane. kept popping up every click on page
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu
Public bug reported:
When grub tries to boot the 3.2.0-40-generic kernel, I get only a black
screen (the screen seems powered off).
This is not happening with the previous kernel version
(3.2.0-39-generic).
An important note: my disk is fully encrypted (actually the setup is LVM
+ encryption). S
Public bug reported:
To reproduce:
while changing screen resolution, during prompt to keep resolution or
automatically revert, attempt to change the resolution again before selecting
option. "Counter until revert" will continue into the negative and window will
be unclosable via gui.
Descript
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/949762
Title:
GUI problem
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/949762/+subscriptions
--
u
Thanks for replying. Forgive my poor English.
I'm referring to the menu that has a dropdown to select another
resolution. Once another resolution is selected and the resolution
changes a dialogue pops up and asks if you want to keep these settings
or revert to the previous resolution. If you selec
I'm not sure what happened here exactly. But the missing asm dir breaks
a lot of builds for me, e.g. ufraw for my own system as well. And my
thought was also that I need to get just build-essential
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
ok I tried and I would have to remove openoffice. that's not an option.
but you can test this yourself in libreoffice. The instructions are easy
and work always.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.ne
It makes no sense to send the apport data because the bug is confirmed
to exist in a vanilla setup.
If I install libreoffice, will this affect my existing openoffice 3.2
installation? Because I have a production system set up here and I can't
risk that. thanks
--
You received this bug notificati
I have the same or a similar problem. But for me this only happens with either
rt2860sta or ndiswrapper + network-manager.
If I run wpa_supplicant manually it works fine.
--
wpa_supplicant causes system to crash.
https://bugs.launchpad.net/bugs/468519
You received this bug notification because y
Public bug reported:
When I turn down the volume from the max setting, the sound just becomes
crackling.
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: alsa-base 1.0.22.1+dfsg-0ubuntu3
ProcVersionSignature: Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5
Uname: Linux 2.6.32-24-generic x86_64
** Attachment added: "AlsaDevices.txt"
https://bugs.launchpad.net/bugs/646116/+attachment/1627265/+files/AlsaDevices.txt
** Attachment added: "BootDmesg.txt"
https://bugs.launchpad.net/bugs/646116/+attachment/1627266/+files/BootDmesg.txt
** Attachment added: "Card0.Amixer.values.txt"
Any news on this? I've tried to code around it a bit but it didn't work.
I have a feeling this might be a reason I have no backlight control...
It would be great to at least come up with a patch that can be sent
upstream.
--
intel poulsbo (psb): kernel BUG: unable to handle kernel NULL pointer
Here's how you even get hardware video decoding acceleration: http
://linux-tipps.blogspot.com/2010/06/setting-up-vaapi-hardware-
accelerated.html.
--
MASTER: GMA-500 lacks driver for 8.10 and 9.10 (poulsbo works only on 8.04 and
9.04)
https://bugs.launchpad.net/bugs/330906
You received this bug
Public bug reported:
Binary package hint: update-manager
Ubuntu release: 10.04.1 LTS
Version of package is unknown. The command apt-cache policy packagename
returns the error below.
Ubunto 10.04 was completely removed and reinstalled via CD and same
errors continue to occur.
Issue occurs when
ok, that was easy, I just applied the patch to karmic's version. try this if
you're still in karmic as I am...
http://drop.io/tkzi7vp/asset/xserver-xorg-input-evdev-2-2-5-1ubuntu6-i386-linuxtipps2-deb
** Attachment added: "evdev patched version for karmic i386 deb package"
https://bugs.launch
Public bug reported:
Binary package hint: python-reportlab
Ubuntu 10.04
Error occurs when trying to install HP printer drivers
package...hplip-3.10.6.
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: python-reportlab 2.4-1
ProcVersionSignature: Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm
** Attachment added: "AptOrdering.txt"
http://launchpadlibrarian.net/53259669/AptOrdering.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/53259670/Dependencies.txt
** Attachment added: "Df.txt"
http://launchpadlibrarian.net/53259671/Df.txt
** Attachment added:
Public bug reported:
Binary package hint: update-manager
Ubuntu 10.04
Error occurred during a standard sudo apt-get upgrade from within the
terminal.
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: update-manager-core 1:0.134.10
ProcVersionSignature: Ubuntu 2.6.32-24.39-generic 2.6.32
** Attachment added: "AptOrdering.txt"
http://launchpadlibrarian.net/53460468/AptOrdering.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/53460469/Dependencies.txt
** Attachment added: "Df.txt"
http://launchpadlibrarian.net/53460470/Df.txt
** Attachment added:
Public bug reported:
Hardware: Lenovo P73 with NVIDEA RTX-5000 QMax
20.04 Daily Build install.
On using the USB drive for a new install the screen is corrupt. This can be
worked around by:
1. Waiting for Focal Fossa to give the sound showing the splash screen.
2. Closing the screen so it goes i
Public bug reported:
The installation scripts loads the correct drivers so the touch pad and
pointer works during the install. However after the install neither
work.
I've worked around it by using a wireless USB from Vilros for mouse input while
logging in. Then issuing (found on https://askubu
And it's an issue with 20.04 daily builds.
Hardware is Lenovo P73 with NVIDIA RTX-5000 Q-Max.
So how can the driver be made to register the backlight device?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/b
I didn't receive confirmation about the mainline kernel to use.
In the meantime I created a file called /etc/modprobe.d/iwl.conf and
filled it with the following:
options iwlwifi 11n_disable=1 swcrypto=0 bt_coex_active=0 power_save=0
options iwlmvm power_scheme=1
options iwlwifi d0i3_disable=1
Reproduced on latest centos kernel 3.10.0-1160.53
It's so strange that this keeps on happening I tried disabling swap and
everything but it doesn't care. There's 100 GB free ram and yet it
happens
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
I have the same problem. In my case, it is caused by upgrading the
NVIDIA driver metapackage to 510 from 470.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1947568
Title:
cannot promote clone: "not
I have the same problem. In my case, it is caused by upgrading the
NVIDIA driver metapackage to 510 from 470.
I am very grateful to @lockszmith for sharing his steps on
https://askubuntu.com/questions/1388997/zsys-commit-service-fails-with-
couldnt-promote-dataset-not-a-cloned-filesy
It really ma
-v --with-pkgversion='Ubuntu
11.4.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs
--enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr
--with-gcc-major-version-only --program-suffix=-11
--program-prefix=x86_64-linux-gnu- --enable-share
Public bug reported:
Distributor ID: Ubuntu
Description:Ubuntu 24.04.2 LTS
Release:24.04
Codename: noble
python3-mapnik:
Встановлено: 1:0.0~20200224-7da019cf9-5build3
Кандидат:1:0.0~20200224-7da019cf9-5build3
Таблиця версій:
*** 1:0.0~20200224-7da019cf9-5build3 500
Public bug reported:
I made an update yesterday on June 27 2025. Since then the App Center opens a
transparent window that shows my wallpaper with a black bar on top. And, this
might be related, Brave Browser also freezes 5 seconds after opening, this
happened after yesterdays update too, maybe
Public bug reported:
Binary package hint: firefox-3.5
no more information
ProblemType: Bug
Architecture: i386
Date: Tue Nov 24 08:02:01 2009
DistroRelease: Ubuntu 9.10
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
NonfreeKernelModules: nvidia
Package: firefox-3.5 3.5.
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/36005990/Dependencies.txt
** Attachment added: "ExtensionSummary.txt"
http://launchpadlibrarian.net/36005991/ExtensionSummary.txt
** Attachment added: "profile_default_pluginreg.dat.txt"
http://launchpadlibrarian.net/
Well, I ran through the tests, once each with a single patch commented
out. The only one that creates this problem is the removal of
105_fdo_att7409_bug5437.diff. I hope this helps.
--
[M6 LY] System lockup when switching VT's or Resume from Suspend
https://bugs.launchpad.net/bugs/148408
You re
using the package
xserver-xorg-video-ati_6.6.193-1ubuntu1p8746_i386.deb
yes, did work. xorg log attached, includes VT switches and suspend/resume
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/16434016/Xorg.0.log
--
[M6 LY] System lockup when switching VT's or Resume from S
well, it reposts the video in the console, but when I try to switch back
it still dies.
--
[M6 LY] System lockup when switching VT's or Resume from Suspend
https://bugs.launchpad.net/bugs/148408
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubu
Public bug reported:
Step 1.
Insert faulty pcmcia card.
lspci reports:
pcilib: Cannot open /sys/bus/pci/devices/:03:00.1/config
lspci: Unable to read the standard configuration space header of device
:03:00.1
Step 2.
Remove faulty card,
lspci report is the same.
Step3.
Insert working pcmc
** Attachment added: "all.log"
http://launchpadlibrarian.net/20279707/all.log
--
Removal of faulty pcmcia/cardbus not detected
https://bugs.launchpad.net/bugs/305967
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mai
I have the same problem on a Gateway MX6028 (same video card).
Some more details:
- Video runs fine if nothing else happens on the screen;
- As soon as I e.g. change the volume (press volume +/-, which is a shortcut to
kmix), switch to Firefox or Thunderbird, etc., the segfault is generated and
I still (occasionally) seem to have the same issue. It only seems to
happen the first time I log in after a reboot. I attached the two
xsession-error logs. HTH.
** Attachment added: "xsession-errors-pre"
http://launchpadlibrarian.net/19750780/xsession-errors-pre
--
Gnome-Do fails to launch fu
101 - 200 of 3787 matches
Mail list logo
