Hi,
As you requested Kyle, I'm adding the "dmidecode" output for you. I will
shortly try the test kit that you have mentioned
(http://www.linuxfirmwarekit.org/).
** Attachment added: "dmidecode"
http://librarian.launchpad.net/6421280/dmidecode.txt
--
The ext3 file system creation in p
I have tried the installation (desktop) with a new media and I'm still getting
the same result :
"The splash screen appears but then a blank screen appears with an underscore
cursor at the top-left of the screen. The desktop never appears."
There is nothing relevant in the BIOS that could help r
Hi,
Well, I have try to reproduce the problem, I can't because now it works
properly.
These are the reproduction steps:
1. Select System->Quit->Hibernation
2. Wait until the machine shutdowns
3. Turn on the machine
4. Run the command ifconfig
This time, I'm getting the ipaddres. I did the
Hi,
I have added the libata-pata line into the /etc/modprobe.d/blacklist and
redid the hibernation process. These are the steps:
1. Select System->Quit->Hibernate
2. Wait until machine powers off
3. Power on the machine
The behavior of the machine did not change. I was still getting the
Hi,
I redid a new feisty herd 3alternate installation and it worked perfectly.
So I think the problem was only with burning of the cd. At the opposite, I did
an feisty herd 3 desktop installation and it get stuck at the end of the
installation. This is were the installation gets stuck:
Det
Hi Ben,
I redid the hibernation process.
These are the steps:
1. Select System->Quit->Hibernation
2. Wait until the machine shutdowns
3. Turn on the machine
4. Run the command ifconfig
Like the first time, the ethernet interface disappeared. I followed your
instructions.
First, I did:
Hi,
Well I redid a feisty herd 3 desktop with a new CD and check for bugs on
the cd and there was 1 checksum failure so I burned a new one, check for errors
and there was no errors and all the installation went perfectly. I did not got
any screen problems. I think, in the future, we will c
Public bug reported:
When installing Feisty herd 3 using the desktop CD on D3C5105, at the
end on installation, the usual window that asks you to take out the cd
and restart appeared. I clicked on "Restart now" and a loud beeping
started coming out.
Reproduction steps:
1. Start the Herd 3 live CD
** Attachment added: "lspci-vv"
http://librarian.launchpad.net/6438828/lspci_vv.txt
--
Beeping sound starts on D3C5105 after the end of installation process with
Feisty herd 3 desktop CD
https://launchpad.net/bugs/85177
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists
** Attachment added: "lspci -vvn"
http://librarian.launchpad.net/6438830/lspci_vvn.txt
--
Beeping sound starts on D3C5105 after the end of installation process with
Feisty herd 3 desktop CD
https://launchpad.net/bugs/85177
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://li
Public bug reported:
Hi
I did an feisty herd 3 desktop installation and it get stuck at the end
of the installation. This is were the installation gets stuck:
Detecting hardware, please wait...
90%
Loading module 'aec62xx' for 'IDE chipset support'...
I redid the desktop installation with anoth
** Attachment added: "lspci -vv"
http://librarian.launchpad.net/6441995/lspci_vv.txt
--
Unable to install Desktop Feisty herd 3 on AMD Geode, the installation stays
stuck at 90% with this on the screen "Loading module 'aec62xx' for 'IDE chipset
support'...
https://launchpad.net/bugs/85408
** Attachment added: "syslog"
http://librarian.launchpad.net/6441998/syslog
--
Unable to install Desktop Feisty herd 3 on AMD Geode, the installation stays
stuck at 90% with this on the screen "Loading module 'aec62xx' for 'IDE chipset
support'...
https://launchpad.net/bugs/85408
--
ubunt
** Attachment added: "cpuinfo"
http://librarian.launchpad.net/6441999/cpuinfo
--
Unable to install Desktop Feisty herd 3 on AMD Geode, the installation stays
stuck at 90% with this on the screen "Loading module 'aec62xx' for 'IDE chipset
support'...
https://launchpad.net/bugs/85408
--
ubu
** Attachment added: "lspci -vvn"
http://librarian.launchpad.net/6441997/lspci_vvn.txt
--
Unable to install Desktop Feisty herd 3 on AMD Geode, the installation stays
stuck at 90% with this on the screen "Loading module 'aec62xx' for 'IDE chipset
support'...
https://launchpad.net/bugs/85408
Hi Fabio,
I have tried both with and without PATA/SATA.
(/etc/modprobe.d/blacklist) It's the same result, I'm still getting the black
screen with the mouse and nothing else.
Ampinder
--
Hibernation on Feisty herd 3 doesn't wake for Sun Ultra 20 Work
https://lau
here is the same problem with intel pentium 4 processor
** Attachment added: "cpuinfo"
http://librarian.launchpad.net/5758378/ampindertest
--
feisty-alternate-i386 for herd-2 cannot install kernel from CDROM
https://launchpad.net/bugs/79109
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubun
Public bug reported:
The computer tested was a Dell Optiplex GX-620 (i386 processor).
The installation is completed and when it asks to restart the computer it wont,
it stays frozen. The console are not working so you can't test any commands.
** Affects: Ubuntu
Importance: Undecided
Public bug reported:
The computer that was test had AMD 64 dual opteron processors.
All the installation is complete, when it shows the window for restart, it
doesn't want to restart.
The console shows this message:
The system is going for reboot now.
Rebooted from gdm menu.
Kernel direct map
Public bug reported:
I finished the installation of Ubuntu on a virtual machine. The version
of Ubuntu that I used is: Ubuntu festy (developpemnt branch) 7.04.
I checked the logs for the daemons, the kernel, also the messages and I
didn't find any problems over there.
By doing the command:
ps au
thx alot for the quick response, well i tried everything, i tried to
open another terminal but is stayed frozen. Is there any other way to
unstuck it.
--
Desktop installation is done, but can't restart
https://launchpad.net/bugs/79554
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
htt
Public bug reported:
During the desktop installation of feisty on a i386 processor, the
screen became blury as soon as it got on the installation screen. I
rebooted and used: vga =771 in the installation options (F6) and after
the screen appeared and I continued my installation.
** Affects: Ubunt
** Attachment added: "lspci_vv"
http://librarian.launchpad.net/5786696/lspci_vv.txt
--
intel 965 G1 graphics controller blurs during feisty-desktop-i386 install
https://launchpad.net/bugs/80500
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinf
** Attachment added: "lspci_vvn"
http://librarian.launchpad.net/5786698/lspci_vvn.txt
--
intel 965 G1 graphics controller blurs during feisty-desktop-i386 install
https://launchpad.net/bugs/80500
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listi
** Attachment added: "xorg.conf"
http://librarian.launchpad.net/5786700/xorg.conf
--
intel 965 G1 graphics controller blurs during feisty-desktop-i386 install
https://launchpad.net/bugs/80500
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/
** Attachment added: "Xorg.0.log"
http://librarian.launchpad.net/5786701/Xorg.0.log
--
intel 965 G1 graphics controller blurs during feisty-desktop-i386 install
https://launchpad.net/bugs/80500
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinf
** Attachment added: "lsmod"
http://librarian.launchpad.net/5786717/lsmod.txt
--
intel 965 G1 graphics controller blurs during feisty-desktop-i386 install
https://launchpad.net/bugs/80500
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubun
** Attachment added: "syslog"
http://librarian.launchpad.net/5786719/syslog
--
intel 965 G1 graphics controller blurs during feisty-desktop-i386 install
https://launchpad.net/bugs/80500
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu
** Attachment added: "lspci_vv"
http://librarian.launchpad.net/5786749/lspci_vv.txt
--
Desktop installation is done, but can't restart
https://launchpad.net/bugs/79554
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "lshal"
http://librarian.launchpad.net/5786753/lshal.txt
--
Desktop installation is done, but can't restart
https://launchpad.net/bugs/79554
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I have redone another installation on the machine. and i got the same
error.
The system is going for reboot now.
Rebooted from gdm menu.
Kernel direct mapping tables up to [EMAIL PROTECTED]
This time I'm adding some files for details.
** Attachment added: "syslog"
http://librarian.launchpad.n
** Attachment added: "cpuinfo"
http://librarian.launchpad.net/5786777/cpuinfo
--
Desktop installation is done, but can't restart
https://launchpad.net/bugs/79554
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "cpuinfo"
http://librarian.launchpad.net/5786790/cpuinfo
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubun
** Attachment added: "lsmod"
http://librarian.launchpad.net/5786794/lsmod.txt
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubun
** Attachment added: "dmesg"
http://librarian.launchpad.net/5786791/dmesg
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-b
** Attachment added: "syslog"
http://librarian.launchpad.net/5786793/syslog
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu
Public bug reported:
During the installation of feisty-desktop-i386 install, I got a error that
pop-up on the screen that was saying :
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
I clicked OK and the installation stopped right there.
** Affects: Ubuntu
Importa
** Attachment added: "kern.log"
http://librarian.launchpad.net/5786792/kern.log
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ub
** Attachment added: "lspci_vv"
http://librarian.launchpad.net/5786796/lspci_vv.txt
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinf
** Attachment added: "lspci_vvn"
http://librarian.launchpad.net/5786797/lspci_vvn.txt
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listi
Public bug reported:
Desktop installation of feisty on a i386 processor.
The network was not working after the hibernate process. I had no IP address on
my Ethernet card.
This is the error that I got on dmesg:
[ 40.630632] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 60.
** Attachment added: "cpuinfo"
http://librarian.launchpad.net/5800646/cpuinfo
--
Network interface for Intel PRO/100 VE controller doesn't appear after
hibernation
https://launchpad.net/bugs/80627
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/lis
** Attachment added: "lshal"
http://librarian.launchpad.net/5800648/lshal.txt
--
Network interface for Intel PRO/100 VE controller doesn't appear after
hibernation
https://launchpad.net/bugs/80627
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/lis
** Attachment added: "lsmod"
http://librarian.launchpad.net/5800654/lsmod.txt
--
Network interface for Intel PRO/100 VE controller doesn't appear after
hibernation
https://launchpad.net/bugs/80627
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/lis
** Attachment added: "lspci -vv"
http://librarian.launchpad.net/5800661/lspci_vv.txt
--
Network interface for Intel PRO/100 VE controller doesn't appear after
hibernation
https://launchpad.net/bugs/80627
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mail
** Attachment added: "lspci -vvn"
http://librarian.launchpad.net/5800666/lspci_vvn.txt
--
Network interface for Intel PRO/100 VE controller doesn't appear after
hibernation
https://launchpad.net/bugs/80627
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/ma
** Attachment added: "syslog"
http://librarian.launchpad.net/5800670/syslog
--
Network interface for Intel PRO/100 VE controller doesn't appear after
hibernation
https://launchpad.net/bugs/80627
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listi
Public bug reported:
It's a desktop installation of feisty herd 2 on a i386 processor. I was
going to an hibernate test on the machine. As soon as I clicked on the
Hibernate button It just froze the entire computer and all my terminals
were not working. I had to reboot my computer manually.
** Af
I will attach the correct files shortly for the bug
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "lsmod"
http://librarian.launchpad.net/5832333/lsmod.txt
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "xorg.conf"
http://librarian.launchpad.net/5832334/xorg.conf
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "Xorg.0.log"
http://librarian.launchpad.net/5832335/Xorg.0.log
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "lshal"
http://librarian.launchpad.net/5832326/lshal.txt
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "syslog"
http://librarian.launchpad.net/5832325/syslog
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "lspci -vvn"
http://librarian.launchpad.net/5832332/lspci_vvn.txt
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "lspci -vv"
http://librarian.launchpad.net/5832327/lspci_vv.txt
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "cpuinfo"
http://librarian.launchpad.net/5832324/cpuinfo
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I have attached all the useful files regarding this bug.
--
hibernate doesn't work, froze the computer
https://launchpad.net/bugs/80628
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Yes, it happened after I passed the keyboard stage of the installer. So
I'll go and read on bug 73955.
--
intel 965 G1 graphics controller blurs during feisty-desktop-i386 install
https://launchpad.net/bugs/80500
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/
I have reproduced the sound, it happens from the live cd and it's
constant pulsed sound.
I am adding the result of the ps auxww command.
** Attachment added: "ps auxww"
http://librarian.launchpad.net/5832821/ps_auxww.txt
--
Loud beep when installing feisty-desktop-i386 on DQ965COEKR motherb
AMD 64
** Attachment added: "lspci -vv"
http://librarian.launchpad.net/5833887/lspci_vv.txt
--
Intel D3C5201 motherboard doesn't shutdown when hibernating
https://launchpad.net/bugs/80614
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubun
AMD 64
** Attachment added: "lspci -vvn"
http://librarian.launchpad.net/5833891/lspci_vvn.txt
--
Intel D3C5201 motherboard doesn't shutdown when hibernating
https://launchpad.net/bugs/80614
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ub
I have changed the hard drive and I'm still getting the same error message:
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
This happens when I have entered all the necessary information and I
just have to press the "Install" button.
--
The ext3 file system creation in
Hi, I have tested the amd64 cd into the machine as you mentionned I got
the message saying that my machine is a 32bit system that 64bit system
is not supported. It's normal it's the machine has a i386 processor. I
think we got a misunderstanding, you could see in the cpuinfo file that
it's a i386 p
** Attachment added: "dmeg"
http://librarian.launchpad.net/5833856/dmesg
--
Intel D3C5201 motherboard doesn't shutdown when hibernating
https://launchpad.net/bugs/80614
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "kern.log"
http://librarian.launchpad.net/5833874/kern.log
--
Intel D3C5201 motherboard doesn't shutdown when hibernating
https://launchpad.net/bugs/80614
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Attachment added: "dmesg"
http://librarian.launchpad.net/5833857/dmesg
--
Intel D3C5201 motherboard doesn't shutdown when hibernating
https://launchpad.net/bugs/80614
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I have tested the same machine with i386 processor, so the hibernation
problem is still there, I get the same message :"[ 662.120650]Power
down." I did a normal shutdown, that worked properly.
I did an hibernation test on amd64 processor. After clicking on the
hibernation button. The system did no
** Attachment added: "lshal"
http://librarian.launchpad.net/5833879/lshal.txt
--
Intel D3C5201 motherboard doesn't shutdown when hibernating
https://launchpad.net/bugs/80614
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
As you mentioned, I removed the "quiet splash" at boot screen (F6) and
start the the installation. I did the complete installation and got no
sound coming from the machine. So, to be sure, I redid the test by
adding the "quiet splash" and the sound started to come back.
I verified the machine, the
Hi,
I have changed the cables also and I'm still getting the same error
message.
Thanks
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailm
Hi,
I was using feisty herd 2.
Thanks
--
can't restart a desktop installation on i386
https://launchpad.net/bugs/79548
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Hi,
I was using feisty herd 2.
Thanks
--
Desktop installation is done, but can't restart
https://launchpad.net/bugs/79554
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Hi,
I have used "pci=nommconf" and the installation was done completely.
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-b
** Description changed:
It's a desktop installation of feisty herd 2 on a i386 processor. I was
going to an hibernate test on the machine. As soon as I clicked on the
Hibernate button It just froze the entire computer and all my terminals
- were not working. I had to reboot my computer manua
Yes, I have entered your command and the installation work until the
end. I was able to write on the disk, without having any error message
getting displayed on the screen.
--
The ext3 file system creation in partition #1 of IDE4 master (hdg) failed
https://launchpad.net/bugs/80503
--
ubuntu-bu
76 matches
Mail list logo
