Public bug reported:
it said disk can not be copied in hardisk
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ubiquity 18.04.14.6
ProcVersionSignature: Ubuntu 4.15.0-29.31-generic 4.15.18
Uname: Linux 4.15.0-29-generic x86_64
ApportVersion: 2.20.9-0ubuntu7.2
Architecture: amd64
CasperVersi
** Changed in: ubuntu-kernel-tests
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1789353
Title:
stack protector related configs test failed in qrt for ARM64 T-LTS-X
** Bug watch added: KDE Bug Tracking System #400568
https://bugs.kde.org/show_bug.cgi?id=400568
** Also affects: latte-dock via
https://bugs.kde.org/show_bug.cgi?id=400568
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of Ubuntu
Thank you Daniel,
I loaded Ubuntu again and now everything looks fine. Hopefully it will
stay this way.
With thanks to you
Spreebogendd
Am 07.11.18 um 02:47 schrieb Daniel van Vugt:
> Also, please run these commands and send the output:
>
>sudo apt install edid-decode
>for e in /sys/cl
Public bug reported:
This is a split from bug 1800976, to make it become more specific to a
single failure.
This test will fail with the proposed Xenial kernel.
FAIL: test_095_kernel_symbols_missing_proc_self_stack
(__main__.KernelSecurityTest)
kernel addresses in /proc/self/stack are zeroe
** Tags added: bionic2cosmic
** Tags added: third-party-packages
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1802050
Title:
Kernel module crash 4.18.0-10 after upgrade from 18.04 to 18.10
To man
0.8.75+git20181023.0746-0~ubuntu18.04~ppa1 is an experimental PPA
package from upstream git, not an official package.
For the record, if the issue is that latte cannot run with a stale qml
cache in ~/.cache/lattedock/qmlcache/ then this is an upstream KDE issue
that cannot be addressed in distro p
It looks like there is a nbd related failure in the test report.
I will split the kernel_security one first to nail them down one by one:
https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1802069
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Attachment added: "journalctl.log"
https://bugs.launchpad.net/ubuntu/+source/lxd/+bug/1801957/+attachment/5209922/+files/journalctl.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801957
Tit
** Attachment added: "lxd.log.1"
https://bugs.launchpad.net/ubuntu/+source/lxd/+bug/1801957/+attachment/5209923/+files/lxd.log.1
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801957
Title:
lxd
The mainline kernel indeed seems to fix the issue: Not a single failed
suspend/resume cycle since using 4.19.1.
** Tags added: kernel-fixed-upstream
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs
Here they are. As you can see upgrade started at Nov 06 15:02 and at
about 15:50 I downngraded and started older version.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801957
Title:
lxd upgrade hun
The failure in Trusty ARM64 is a bit different:
With 3.13.0-161-generic
request_key03.c:115: BROK: unexpected error adding key of type 'trusted': ENOMEM
With 3.13.0-162-generic
request_key03.c:70: BROK: failed to join new session keyring: EDQUOT
--
You received this bug notification because you
Any plans on fixing this? Anything I can provide you for analysis?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1674401
Title:
Error Message: The Window Switcher installation is broken, resources
For me, the problem does not occur when using the default task-switcher.
It occurs only when I try to install additional task switcher styles in
the system settings dialog
--
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to kwin in Ubuntu.
https:
I use KDE Plasma on Ubuntu Bionic and the problem still exists
** Summary changed:
- Broken window switcher (?) - mysterious message
+ Error Message: The Window Switcher installation is broken, resources are
missing. Contact your distribution about this.
--
You received this bug notification
I just ran apport-collect 1801898. But it doesn't seem to upload any
data to launchpad. I granted access to my launchpad account and apport
ran until showing a dialog where I clicked "Send". Then nothing more
happened.
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
I don't know is this cloud-init or netplan or what, but this is not
good.
Background:
# lsb_release -rd
Description:Ubuntu 18.04.1 LTS
Release:18.04
# apt-cache policy cloud-init
cloud-init:
Installed: 18.4-0ubuntu1~18.04.1
Candidate: 18.4-0ubuntu1~18.04.1
V
This bug has re-appeared as pc-i440fx-zesty (17.04) is not in the qemu
machine types in cosmic (18.10) - I can now no longer run any snapshots
I made when I was running 17.04.
error: unsupported configuration: Target domain machine type pc-i440fx-cosmic
does not match source pc-i440fx-zesty
$
The upstream fix to this has just landed in master:
https://review.openstack.org/#/c/614082/
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1793813
Title:
magnum-api not working with www_authenticate
Upgrading to disco 19.04 does not solve the issue.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1800464
Title:
CRITICAL gnome-shell error: segfault error 4 in libmozjs-60.so.0.0.0
To manage notifi
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: initramfs-tools (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1768831
Tit
recurrence of bug
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1626070
Title:
Removal of former release machine types breaks VMs using them
To manage notifications about this bug go to:
https://bu
Here is the output of `dmesg > ~/dmesg`
** Attachment added: "`dmesg > ~/dmesg` output"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1802076/+attachment/5209937/+files/dmesg
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
No bluetooth device is found.
`rfkill list` shows a wifi device only, no bluetooth.
# rfkill list
0: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
ProblemType:
Public bug reported:
My Laptop is an ASUS TUF FX504 Series model. I installed ubuntu 18.04.1
on it but my trackpad is not detected. Attaching an external mouse works
fine.
Trackpad is easily identified by Windows 10.
`cat /proc/bus/input/devices | grep Name` shows the output:
```
N: Name="Sleep
This change was made by a bot.
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1802077
Title:
Bluetooth is not working on Lenovo IdeaPad
CONFIG_SECCOMP_FILTER does not appear to be configured for the ARM64
system, I presume this is the same for the Power8 box too.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801856
Title:
seccomp i
And little bit more testing. It really seems to be that cloud-init does
not generate the file again if not run clout-init clean before. So it
doesn't generate the file again after stop&start and macaddress differs
and no network, and no network.
Let's test it by editing the file by hand:
$ cat /e
This bug is missing log files that will aid in diagnosing the problem.
While running an Ubuntu kernel (not a mainline or third-party kernel)
please enter the following command in a terminal window:
apport-collect 1802076
and then change the status of the bug to 'Confirmed'.
If, due to the nature
** Package changed: ubuntu => cups (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801496
Title:
Printing job in 16.04 is slower than in 14.04
To manage notifications about this bug go to:
Corey,
Why was the bug marked as invalid for xenial / cloudarchive?
Thanks,
Andrea
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1800490
Title:
[SRU] update to queens/3.14.2
To manage notificatio
@Andrew: sorry, but your GPU is supported only by the 340 legacy driver,
and we do not support hybrid graphics with that driver.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1778011
Title:
SRU: PRI
The arches don't have HAVE_ARCH_SECCOMP_FILTER enabled as this has not
been implemented, so seccomp filtering does not exist. I'll fix stress-
ng to handle this corner case without an error.
** Changed in: stress-ng
Status: New => In Progress
** Changed in: stress-ng
Importance: Undecid
So the issue lies within the _read_twice() in test-kernel-security.py
script.
The first attempt to cat /proc/self/stack will return 0, as it's reading the
file as root.
The second attempt will failed with "permission denied" as we're not allowing
regular user to access that file anymore.
But th
Same for me on Ubuntu 18.04 and GNOME Shell 3.28.3. I've got 2 input
methods on my machine, EN and RU. When locking the screen with last
window's language set to RU, I cannot log back in as password input
always uses RU language despite of the language toggler state in
password modal.
--
You rece
apport information
** Tags added: apport-collected ubuntu
** Description changed:
After upgrading to Ubuntu 18.10 from Ubuntu 18.04, when logging in my one of
my two external displays will not be activated without hotplugging the other
external display.
The display settings app shows the s
apport information
** Attachment added: "Lspci.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209957/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
Title:
Only
apport information
** Attachment added: "MonitorsUser.xml.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209959/+files/MonitorsUser.xml.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
apport information
** Attachment added: "DpkgLog.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209956/+files/DpkgLog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
Title:
apport information
** Attachment added: "XorgLog.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209966/+files/XorgLog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
Title:
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209962/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
apport information
** Attachment added: "UdevDb.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209965/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
Title:
On
apport information
** Attachment added: "XorgLogOld.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209967/+files/XorgLogOld.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
Ti
apport information
** Attachment added: "ProcModules.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209964/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
apport information
** Attachment added: "Xrandr.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209968/+files/Xrandr.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
Title:
On
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209960/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
apport information
** Attachment added: "CurrentDmesg.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209955/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
apport information
** Attachment added: "ProcCpuinfoMinimal.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209961/+files/ProcCpuinfoMinimal.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/
apport information
** Attachment added: "Lsusb.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209958/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
Title:
Only
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209963/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/180
apport information
** Attachment added: "xdpyinfo.txt"
https://bugs.launchpad.net/bugs/1801898/+attachment/5209969/+files/xdpyinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
Title:
** Description changed:
No bluetooth device is found.
`rfkill list` shows a wifi device only, no bluetooth.
# rfkill list
0: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blo
@Thomas: sorry, took me some days to find the time and check with
freshly installed versions:
16.04.5 LTS (Xenial Xerus):
~#ip token list
token :: dev eth0
~# ip token set ::12 dev eth0
~# ip token list
token ::12 dev eth0
~# ip token set ::ab dev eth0
~# ip token list
token ::ab dev eth0
Debi
Also checked removing of tokens:
~# ip token set :: dev eth0
~# ip token list
token :: dev eth0
This works in Xenial and Stretch without any errors.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1777
whoopsie was not running... now it is
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801898
Title:
Only one of two external (displayport) displays is working without
hotplug
To manage notificatio
UPDATE to Bug Description!
That only happens if I am disable the touchpad from the terminal with
command """xinput set-prop 13 "Device Enabled" 0"""
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/18015
We are reported that users(who are affect by this problem ) can't do
their job normally. Such as, doctors' consulting speed are seriously
delay by the medical diagnostic document printing speed.
We(RICOH printer driver developer) are still working hard to looking for an
workaround to make sure ou
Public bug reported:
SRU Justification
Impact:
The upstream process for stable tree updates is quite similar
in scope to the Ubuntu SRU process, e.g., each patch has to
demonstrably fix a bug, and each patch is vetted by upstream
by originating either directly
Thanks Jens!
** Changed in: shotwell (Ubuntu)
Importance: Medium => High
** Changed in: shotwell (Ubuntu)
Status: Confirmed => In Progress
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1723
*** This bug is a duplicate of bug 1723181 ***
https://bugs.launchpad.net/bugs/1723181
** This bug has been marked a duplicate of bug 1723181
shotwell crashed with SIGSEGV in g_menu_model_get_n_items()
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Hardware Certification have completed testing this -proposed kernel. No
regressions were observed, results are available here:
http://people.canonical.com/~hwcert/sru-
testing/raspi2/4.4.0-1100.108/raspi2-4.4-proposed-published.html
** Tags added: certification-testing-passed
** Changed in: kerne
*** This bug is a duplicate of bug 1723181 ***
https://bugs.launchpad.net/bugs/1723181
** This bug is no longer a duplicate of bug 1723973
/usr/bin/shotwell:11:g_menu_model_get_n_items:gtk_application_window_update_shell_shows_app_menu:gtk_application_window_real_realize:_g_closure_invoke_
** Also affects: linux (Ubuntu Cosmic)
Importance: Undecided
Status: New
** Changed in: linux (Ubuntu Cosmic)
Importance: Undecided => Medium
** Changed in: linux (Ubuntu Cosmic)
Status: New => Fix Committed
--
You received this bug notification because you are a member of U
Hardware Certification have completed testing this -proposed kernel. No
regressions were observed, results are available here:
http://people.canonical.com/~hwcert/sru-
testing/raspi2/4.15.0-1028.30/raspi2-4.15-proposed-published.html
** Tags added: certification-testing-passed
** Changed in: kern
** Tags added: ibus
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801832
Title:
Input method toggled when using the numeric pad
To manage notifications about this bug go to:
https://bugs.launchpad
** Changed in: thunar (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1797641
Title:
Thunar crashes when copying multiple files from usb HDD
To manage notifi
Any news? Alternatively, you can install the newer version from this
PPA:
https://launchpad.net/~xubuntu-dev/+archive/ubuntu/experimental
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1796089
Title:
Hardware Certification have completed testing this -proposed kernel. No
regressions were observed, results are available here:
http://people.canonical.com/~hwcert/sru-
testing/snapdragon/4.4.0-1104.109/snapdragon-4.4-proposed-published.html
** Tags added: certification-testing-passed
** Changed i
I suggest that you open a new upstream bug report if you want the
current Thunar developer to look into this.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1795001
Title:
Thunar automatically switch
** Changed in: thunar (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1779571
Title:
thunar: no thumbnails when gphoto2 mounts camera to default location
To
** Changed in: thunar (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1772890
Title:
Side pane - no logical order of mounted drives
To manage notifications a
Still no solution?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1767162
Title:
Random stripes and dots
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/rhyth
Sorry but it's still a bit confusing to me so taking a step back
- on a stock XPS with the non-SRU version, what keycode do you get in xev
- on a stock cosmic what happens when you use the key
- does that command works to get out of airplane mode?
gdbus call --session --dest org.gnome.SettingsDae
** Description changed:
This bug is for tracking the upload package. This
bug will contain status and testing results related to that upload.
For an explanation of the tasks and the associated workflow see:
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
-- swm properties --
boot
** Description changed:
This bug is for tracking the upload package. This
bug will contain status and testing results related to that upload.
For an explanation of the tasks and the associated workflow see:
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
-- swm properties --
boot
** Description changed:
This bug is for tracking the upload package. This
bug will contain status and testing results related to that upload.
For an explanation of the tasks and the associated workflow see:
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
-- swm properties --
boot
I talked to the security team. There is no reason to check for
CONFIG_RETPOLINE != 'y' in Precise. CONFIG_RETPOLINE should always be
set to 'y', even if the toolchain doesn't support it. There are minimal
mitigations that we get even without toolchain support but for that we
need CONFIG_RETPOLINE e
The result is a bit different on PowerPC and ARM64:
<<>>
tag=openat03 stime=1541585769
cmdline="openat03"
contacts=""
analysis=exit
<<>>
incrementing stop
openat031 TBROK : openat03.c:59: openat() failed: errno=EINVAL(22):
Invalid argument
openat032 TBROK : openat03.c:59: Remaining c
4.4.0-138.164~14.04.1 - generic
Regression test CMPL, RTB.
Issue to note in amd64:
ubuntu_bpf - should be blacklisted
ubuntu_ecryptfs - extend-file-random.sh.btrfs (bug 1684788)
trunc-file.sh.btrfs (bug 1684789)
ubuntu_kvm_smoke_test - uvt-kvm wait issue on Trusty (bug 1732883)
ubuntu_kvm
** Description changed:
This bug is for tracking the upload package. This
bug will contain status and testing results related to that upload.
For an explanation of the tasks and the associated workflow see:
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
-- swm properties --
boot
While not relating to the discussion of certain SSLProtocol and
SSLCipherSuite combinations halting desired SSLProtocols, I did want to
add that I had an issue where Let's Encrypt was holding my desired
changes back.
I was attempting to use the directive:
`SSLProtocols -all +TLSv1.1 +TLSv1.2` but
@Aaron C: Let's Encrypt has nothing to do with your server
configuration. You probably meant a config addition by an LE client,
such as certbot?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1665151
T
Can we please backport this to 2.4.x branch? It is not present in 2.4.35
:-(
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1641238
Title:
as a reverse proxy, a 100 continue response is sent prematur
Skip "rtnetlink: fix rtnl_fdb_dump() for ndmsg header" because it was
already applied for bug #1796748.
** Description changed:
+ SRU Justification
- SRU Justification
+ Impact:
+ The upstream process for stable tree updates is quite similar
+ in scope to the Ubuntu SRU p
Launchpad has imported 1 comments from the remote bug at
https://bz.apache.org/SpamAssassin/show_bug.cgi?id=7646.
If you reply to an imported comment from within Launchpad, your comment
will be sent to the remote bug automatically. Read more about
Launchpad's inter-bugtracker facilities at
https:/
@Stefan Yes. I'm using Certbot to manage my LE Certs, and Certbot makes
those configuration changes automatically. All I'm saying is it would be
really useful to have a command / flag that would simply state what
directives are taking precedence for configuration, because situations
like this arise
Did this issue start happening after an update/upgrade? Was there a
prior kernel version where you were not having this particular problem?
Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v4.19 kernel[0
The same happened to me with Atril (Mate desktop) and Evince (Gnome
desktop) in Debian testing last month. Stop opening cbr files but still
opening cbz files. It's a problem with mime types.
Evince fixed it with this short patch:
https://gitlab.gnome.org/GNOME/evince/issues/972
https://gitlab.gn
--- Comment From jac...@de.ibm.com 2018-11-07 05:41 EDT---
Wow, I see a new build ... but it still doesn't work:
milliadm@mclint:~$ ldd /usr/lib/firefox/libxul.so | grep -v \(0x
/usr/lib/firefox/libxul.so: /usr/lib/s390x-linux-gnu/libstdc++.so.6: version
`GLIBCXX_3.4.22' not found (requir
This bug affects me too.
Ubuntu 18.10.
GeForce GTX 960M
Driver Version: 410.73
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1800465
Title:
Vulkan error when using NVIDIA-Prime
To manage notifica
More infos. I installed the notebook from scratch with a 16.04.2 image
and update to latest 16.04 packages which installed 4.15.0-38 kernel.
The laptop has the correct behavior, without entering settings I can
switch/duplicate displays with the fn key.
So original problem seems not related to kern
Bug fixed for me on Intel(R) Atom(TM) CPU N550 @ 1.50GHz with mutter
3.28.3-2~ubuntu18.04.2
** Tags removed: verification-needed-bionic
** Tags added: verification-done-bionic
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bu
So I think there is an issue regarding GDM and updated Nvidia
drivers...?
Well the issue with Nvidia settings is certainly releated to updated
Nvidia drivers
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/b
** Description changed:
Backstory: The discrete touchpad enable/disable switch does not work on
Ubuntu but works perfectly on windows. This is probably an issue of the
msi_wmi drivers, so I tried to find a solution.
Followed the instructions here -
https://wiki.ubuntu.com/Kernel/Refer
A temporary workaround is to switch gdm to another display manager
Well there is another problem when you update the drivers on Intel you
can't open the nvidia settings, just save the old nvidia-settings and
libs from /use/lib
On Ubuntu 18.04 is present only if you update the drivers from the rep
Public bug reported:
The latest update for Bionic (18.04.1) either overwrote or modified my
/etc/ssh/sshd_config with the result that I could no longer access my
machine using ssh.
A specific
Port [x]
line was removed and replaced by:
#Port 22
This was the only change. It happened as par
Spotted on Cosmic KVM as well.
** Summary changed:
- ubuntu_fan_smoke_test failed on 4.4/4.15 kvm & azure kernel
+ ubuntu_fan_smoke_test failed on 4.4/4.15/4.18 kvm & azure kernel
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https
Ok, I did further testing and the fix made things even worse!
(I used two - apart from this new samba version - identical VMs to verify the
behavior.)
Before the fix I was not able to delete non-empty directories.
With installed fix I'm not able to delete ANY directory - regardless of content!
-
https://gitlab.isc.org/isc-projects/bind9/merge_requests/855#note_27860
was merged to fix that issue.
** Tags added: server-next
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1797926
Title:
host cr
1 - 100 of 1111 matches
Mail list logo
