Public bug reported:
Distribution: Ubuntu Intrepid
Module: iwl3945
Error:
The wireless just died so I don't have a reproduce for this.
log/messages):
###
Jan 28 08:35:52 ubuntu kernel: [ 1453.856115] [ cut here
]--
Thank you for helping to make Ubuntu better.
I guess that means that this is not a bug so I'm going to mark it as
'Invalid'. See https://wiki.ubuntu.com/Bugs/Status for some information
about bug statuses.
** Changed in: localepurge (Ubuntu)
Status: New => Invalid
--
You have to configu
The Brother QL-560 is also recognized but no driver is downloadable.
Brother has not made any linux driver for it but they say the QL-550
should be compatible. I'm not sure how to trick the system into using it
for the QL-560 though. And the open driver does not work either.
--
Drivers for QL-500
I have the identical problem with an Asus P4S800D-E Deluxe motherboard
(which also uses a onboard Marvell 88E8001 Gigabit Ethernet controller),
we also have the D-Link DGS-1005D switch.
The only difference we experience is that both with Linux or MS Windows
XP the system freezes up at the moment t
Hi all and Chris,
I don't use Xen, the tg3 driver or something else produces this error, too.
Yesterday I have found out that disabling AND reenabling checksum validation
with
'sudo ethtool -K eth0 tx off rx off; sudo ethtool -K eth0 tx on rx on' fixes
the error, too!
Another notebook (HP 530)
Could you test it again with current Jaunty with all updates? We've
recently upgraded to the 2.6.1 -intel driver, along with new libdrm,
mesa, and xserver, any of which may have addressed this issue.
** Changed in: xserver-xorg-video-intel (Ubuntu)
Status: Confirmed => Incomplete
--
[i96
Public bug reported:
New upstream version includes:
2008-12-02 Morten Kjeldgaard
* src/gpp4_open_symop_file.c: New file containing function
open_symop_file which is special to gpp4.
* Many changes in many files to facilitate merging of future
versions.
** Attachment added: "debdiff"
http://launchpadlibrarian.net/21704809/gpp4.diff
--
Please update gpp4 to the latest version 1.1.0
https://bugs.launchpad.net/bugs/322205
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: "the orig.tar.gz"
http://launchpadlibrarian.net/21704845/gpp4_1.1.0.orig.tar.gz
--
Please update gpp4 to the latest version 1.1.0
https://bugs.launchpad.net/bugs/322205
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubun
** Attachment added: "the diff.gz file"
http://launchpadlibrarian.net/21704849/gpp4_1.1.0-0ubuntu1.diff.gz
--
Please update gpp4 to the latest version 1.1.0
https://bugs.launchpad.net/bugs/322205
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed t
Builds fine on my PPA
http://launchpadlibrarian.net/21704626/buildlog_ubuntu-
jaunty-i386.gpp4_1.1.0-0ubuntu2_FULLYBUILT.txt.gz
--
Please update gpp4 to the latest version 1.1.0
https://bugs.launchpad.net/bugs/322205
You received this bug notification because you are a member of Ubuntu
Bugs, whi
** Description changed:
Since 26/1/2009 my logged in session is lost after resume from sleep:
- Lenovo T500
- Intel GMA x4500 graphics card, using intel driver
Suspend goes along normally but on resume I am given the login menu
Logging in then takes longer than usual (about 10 seconds in
Hi again,
maybe this is a hint: When i do "ps fax" i see:
7769 ?Dl 0:00 \_ nautilus --no-default-window
--sm-client-id default2
7842 ?Z 0:00 | \_ [gnome-mount]
How can i debug gnome-mount ? There is nothing in /var/log/* from gnome-mount.
CU,
I can't test it on jaunty, at least not at the moment. But the xserver
is in the same version as in jaunty so that should not matter.
--
intel gfx: Error in I830WaitLpRing(), timeout for 2 seconds
https://bugs.launchpad.net/bugs/285298
You received this bug notification because you are a member o
My fault: I was not using correctly sbuild.
Will try to build it again now.
** Changed in: freedroidrpg (Ubuntu)
Assignee: (unassigned) => fabrice_sp (fabricesp)
Status: Incomplete => In Progress
--
Please sync freedroid 0.11.1-1 (universe) from Debian experimental (main)
https://bu
Ok, I'll need some further directions on that. I enabled apport
according to the article at https://wiki.ubuntu.com/Apport (enabled=1 in
/etc/default/apport, rebooted system) but it did not budge when
evolution crashed. Also, I tried to get evolution to crash while being
monitored by valgrind (ac
Public bug reported:
After downloading the juanty updates, kmail will not start.
e...@ed-desktop:~$ kmail
kmail(11325) Sonnet::Loader::loadPlugin: Successfully loaded plugin:
"kspell_hspell.desktop"
kmail(11325) Sonnet::Loader::loadPlugin: Successfully loaded plugin:
"kspell_enchant.desktop"
e.
Thank you for taking the time to report this bug and help to improve
Ubuntu.
The only change required here was to get libmrss installable again, so
that the newsbeuter 1.3-1 binaries could be built on all architectures.
This is done now, so I'm closing this bug.
** Changed in: newsbeuter (Ubuntu
The actual bug was part of the kernel source.
** Changed in: linux (Ubuntu)
Sourcepackagename: linux-meta => linux
Assignee: (unassigned) => Stefan Bader (stefan-bader-canonical)
Status: Confirmed => In Progress
--
[intrepid] Can not stop iscsitarget
https://bugs.launchpad.net/bugs/2
In Jaunty (current trunk) the iscsitarget code is 0.4.17.
** Changed in: linux (Ubuntu)
Status: In Progress => Invalid
--
[intrepid] Can not stop iscsitarget
https://bugs.launchpad.net/bugs/278625
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
In Intrepid the fix was released with 2.6.27-11.21.
** Changed in: linux (Ubuntu Intrepid)
Importance: Undecided => Medium
Assignee: (unassigned) => Stefan Bader (stefan-bader-canonical)
Status: Invalid => Fix Released
--
[intrepid] Can not stop iscsitarget
https://bugs.launchpad.
Dustin, I am assigning the iscsitarget package task to you since I don't
know the exact status.
** Changed in: iscsitarget (Ubuntu)
Assignee: Stefan Bader (stefan-bader-canonical) => Dustin Kirkland
(kirkland)
Status: Fix Committed => Triaged
** Changed in: iscsitarget (Ubuntu Intrep
@jptechnical: use the vncviewer mentioned here
https://bugs.launchpad.net/ubuntu/+source/tightvnc/+bug/123631/comments/9 to
make it work in intrepid.
for scrolling in the other direction use the right mouse button...
--
vncviewer -listen allows connections from UltraVNC SC clients, but doesn't
*** This bug is a duplicate of bug 322147 ***
https://bugs.launchpad.net/bugs/322147
** Attachment removed: "Disassembly.txt"
http://launchpadlibrarian.net/21696421/Disassembly.txt
** Attachment removed: "ThreadStacktrace.txt"
http://launchpadlibrarian.net/21696426/ThreadStacktrace.tx
*** This bug is a duplicate of bug 322145 ***
https://bugs.launchpad.net/bugs/322145
** Attachment removed: "ThreadStacktrace.txt"
http://launchpadlibrarian.net/21695834/ThreadStacktrace.txt
** Attachment removed: "Registers.txt"
http://launchpadlibrarian.net/21695832/Registers.txt
*
IT is IMHO the same bug which affects both keyboards, as the same functionality
is affected.
I could of course open a new Bug - but I don't think it is different.
** Attachment added: "Logitech Navigator MX700"
http://launchpadlibrarian.net/21705229/logitech_internetnavigator.jpg
--
Regressi
Public bug reported:
Binary package hint: opennebula
"Success" is misspelled in the "onehost create" help text. It says
"Succes" rather than "Success". I suppose that's what you get when you
have Danes writing that stuff :)
** Affects: opennebula (Ubuntu)
Importance: Undecided
Stat
Public bug reported:
Binary package hint: cups
Release: 8.10
Cups package version: 1.3.9-2ubuntu6.1
I installed Dymo LabelWriter 400 with the Multi-Purpose labels 11354.
I chose the only available driver: Dymo Label Printer, 1.3
Problem: I could not set the correct label size as the Multi-Purpo
These 2 Bugs are not similar (Bug #182704 and Bug #182165) as they are
using the old Drivers, kdb/Corepointer etc. and not evdev. If I
configure my System to use the old Drivers - everything works as
expected. The Bug however here is directly related to evdev - as it does
not recognize the real ca
> Adding its product id to 10-modem.fdi fixes this issue and makes it
work.
Can you please attach your 10-modem.fdi, so that we can actually know
*where* you added it to? (and which interface number, and which
protocol). Thank you!
** Changed in: hal-info (Ubuntu)
Status: New => Incomplete
Looks like the problem is that your graphics chip now has a maximum 1360
x 1360. Try setting the virtual option in your xorg.conf. E.g.:
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
I don't see the problem with 8.10 (flash 10 & FF 3.0.5). Closing it is
OK.
--
[regression] firefox becomes often unresponsive for long periods of time (in
particular when playing flash).
https://bugs.launchpad.net/bugs/213016
You received this bug notification because you are a member of Ubuntu
I have had all the same issues, I hae noticed that the gnome-video-
thumbnailer is what runs off with all of the resources.This is a
directory that I had restored from a backup before i was messsing with
the partitons earlier, and this was the first time i had nautilus go to
that directory.
** Changed in: xserver-xorg-video-intel
Bugwatch: freedesktop.org Bugzilla #19304 => freedesktop.org Bugzilla
#18651
Status: Invalid => Unknown
** Changed in: xserver-xorg-video-intel (Ubuntu)
Importance: Undecided => High
Status: Confirmed => Triaged
--
[i945] spontaneous
Actually :
* On the time I've seen this problem, it was still there after three reboots.
But it has now disappeared...
* If I try to revert to an earlier version of glibc, synaptic wants as well to
remove 56 packets including some important ones... So I prefer not to try.
So for the moment, this
Public bug reported:
Binary package hint: ia32-libs
With ia32-libs_2.7ubuntu3_amd64 installed, acroread freezes after first
displaying a document, no more reaction on mouseclicks and no more
screen update.
Workaround:
1. using --sync, i.e. "acroread --sync exampel.pdf"
2. downgrade ia32-libs, i
The issue is still present with the new gnome-media version
2.25.5-0ubuntu1
--
gnome-volume-control takes several minutes to show GUI
https://bugs.launchpad.net/bugs/318229
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Apparently this got broken in this change:
http://cgit.freedesktop.org/hal-
info/commit/?id=113cbe13dfb3935eeafec66ebbd813b358f7178b
This was an attempt to make this model work with both the hso and the
option kernel driver.
Can you please do
lshal > /tmp/hal-hso.txt
? (I assume the "hso"
Je n'ai pas envoyé de mail a votre adresse.
Il y a eu un message vers Launchpad au moment du probleme , celui habituel.
Je n'ai pas fait de demandes particulieres du moins volontaire.
C'est le processus de bug standard qui vous a envoyé le report.
Je ne suis linux que depuis 2 mois : j'ai pu f
Can you please do
lshal > /tmp/hal-old.txt
with the downgraded hal-info and attach /tmp/hal-old.txt here. Then
upgrade hal-info, reboot, and do
lshal > /tmp/hal-new.txt
and attach it again? That should tell me your vendor/product IDs, and
the changed quirks for your model.
Thanks!
** Chan
I've found a patch for this issue in
https://bugzilla.mozilla.org/show_bug.cgi?id=421839
I've used Launchpad's PPA to rebuild xulrunner-1.9 (debdiff attached).
Indeed, no more SIGSEGV! There is a slightly different behavior for the
site in the description of this bug though: the page doesn't updat
** Changed in: hal-info (Ubuntu)
Assignee: (unassigned) => Martin Pitt (pitti)
Status: New => In Progress
--
Hal fdi update for Sony Ericsson W890i
https://bugs.launchpad.net/bugs/314618
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed t
Jorge - No need to adjust as above, as this is fixed in Jaunty now
(2009.1.1-0ubuntu1)
--
hal rejects to mount ntfs-3g partition
https://bugs.launchpad.net/bugs/300443
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs maili
Public bug reported:
Binary package hint: php5
PHP appears to be opening stdin improperly. You can see the behavior by
running:
$ php -i | less
Notice how less does not redraw the screen correctly, and pressing the
up or down arrow keys results in ^[OB being written to the bottom of the
screen.
** Changed in: firefox
Status: Unknown => Fix Released
--
SIGSEGV in nsViewManager::UpdateWidgetsForView
https://bugs.launchpad.net/bugs/320459
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bu
Any hope that 180.11 is updated to 180.25 soon in the 8.10 repositories
?
By the way, I can't see any hint that 180.25 is beta in the announcement.
Perhaps
http://www.nvidia.com/object/unix.html
is simply not up-to-date.
--
nvidia 180.* driver inhibits resume from suspend
https://bugs.launchpad
Same problem here with ubuntu 810. The death of evolution:
--
(evolution:27842): camel-local-provider-WARNING **: Summary doesn't match the
folder contents! eek!
expecting offset 0 got -1, state = 8
(evolution:27842): camel-local-provider-WARNING **: Summary doesn't match the
fol
** Changed in: xserver-xorg-video-intel (Ubuntu)
Sourcepackagename: None => xserver-xorg-video-intel
--
Session lost on resume from sleep in Jaunty on Lenovo T500
https://bugs.launchpad.net/bugs/322202
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
fwiw, here is the root cause:
Setting up samba-common (2:3.2.3-1ubuntu3) ...
Merging changes into the new version
Conflicts found! Please edit `/etc/samba/smb.conf' and sort them out manually.
The file `/etc/samba/smb.conf.ucf-new' has a record of the failed merge of the
configuration file.
dpk
Thank you.
Can you please attach the .is_audio_player file you created? The lshal
info tells me the vendor/product ID of the device, but I need to know
which playback/record formats your device supports (mp3/ogg/aac, and so
on), and in which folder it stores music (if it has folders).
** Changed
Forgive my ignorance, but I only have 2.6.27-9 how do I upgrade to
2.6.27-11.25? I'm up-to-date with my repositories...
--
cheese malfunctioning with UVCVIDEO webcams (was cheese doesn't show v4l2 video
output and disables output on gstreamer-based apps ran afterwards)
https://bugs.launchpad.net
** Changed in: soundkonverter (Ubuntu)
Status: Fix Committed => Fix Released
--
SoundKonverter is not called from Amarok
https://bugs.launchpad.net/bugs/285387
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailin
You have been subscribed to a public bug:
"DU DU DUUMM DUUM DU! du du du."
This are, in fact, not the sounds of tribal people attacking our
village;
Instead, this are the sounds of Ubuntu awaking entire house / home /
neighborhood, right after installation (actually, after first log
Thank you for taking the time to report this bug and helping to make Ubuntu
better. Please answer these questions:
* Is this reproducible?
* If so, what specific steps should we take to recreate this bug?
This will help us to find and resolve the problem.
** Changed in: evince (Ubuntu)
This is the diff to 10-modem.fdi.
Please note that I know almost nothing about its syntax. I just added my
model where it looked the right place.
In any case, I tested that it works and that I can connect to the
Internet with this configuration.
** Attachment added: "Diff to 10-modem.fdi to enab
This is the diff to 10-modem.fdi.
Please note that I know almost nothing about its syntax. I just added my
model where it looked the right place.
In any case, I tested that it works and that I can connect to the
Internet with this configuration.
** Attachment added: "Diff to 10-modem.fdi to enab
Possibly related to bug 320632?
** Changed in: xserver-xorg-input-synaptics (Ubuntu)
Sourcepackagename: xfree86-driver-synaptics => xserver-xorg-input-synaptics
--
laptop touchpad button shows unreliable behaviour after package upgrade in
Jaunty
https://bugs.launchpad.net/bugs/322155
You receiv
Sounds like a duplicate of bug 286119, please confirm the fix from there
--
[intrepid] firefox crashes frequently on Intrepid with SIGABRT
https://bugs.launchpad.net/bugs/282287
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-
Reducing the frequency of unparking is nearly impossible in Ubuntu, at least
for the developers atm.
It isn't enough to higher the DIRTY_RATIO like laptop-mode does or exit or
disabling hal-polling. If apps like Firefox are used they poll very often.
I personally got longer sleep times (nearly a
You have been subscribed to a public bug:
After downloading the juanty updates, kmail will not start.
e...@ed-desktop:~$ kmail
kmail(11325) Sonnet::Loader::loadPlugin: Successfully loaded plugin:
"kspell_hspell.desktop"
kmail(11325) Sonnet::Loader::loadPlugin: Successfully loaded plugin:
"kspel
Public bug reported:
After successfully building an ixp4xx image with Ubuntu's d-i, and
flashing that image via upslug2, my NSLU2 refused to boot. It seems the
kernel is starting (the lights flash in the usual "starting up" pattern
that Debian shows, then it goes solid red suggesting a freeze of s
Public bug reported:
Binary package hint: gnome-screensaver
1) Ubuntu 8.10
2) gnome-screensaver version 2.24.0-0ubuntu2; and Firefox 3.0.5
3) I expect the screensaver to activate after three minutes (or however
long a delay I have selected) and lock the screen - very important with
a precocious
** Attachment added: "screenshot"
http://launchpadlibrarian.net/21706259/newsfeed.png
--
Firefox RSS feed keeps gnome-screensaver from activating
https://bugs.launchpad.net/bugs/322216
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Thank you for taking the time to report this bug and helping to make
Ubuntu better. Please try to obtain a backtrace following the
instructions at http://wiki.ubuntu.com/DebuggingProgramCrash and upload
the backtrace (as an attachment) to the bug report. This will greatly
help us in tracking down y
the log has lot of errors, the renamed binary has no debug variant
though, could you either rebuild a debug variant or try to run gvfs-
gphoto under valgrind directly without renaming the binary?
--
gvfsd-gphoto2 crashed with SIGSEGV in g_object_constructor() browsing iPhone
https://bugs.launchpa
AFP_SCH: it works for me now. Thank you!
But the package version is the same as I had before from the official
repository, and Synaptic is slightly confused. When I list packages by
origin, Amarok isn't in Local/main, as expected, but in
se.archive.ubuntu.com/main. Furthermore its is markes as if
I followed your instructions closely, but no luck. I know that the
script does run because I put a
touch /home/myname/I_DID_RUN
line in there. I suspect the xsetwacom command fails to connect to my X
server, even though I do correctly specify it as :0.0. This on an almost
fresh installation of
Ok, I'm attaching a new debdiff, now removing the amavis user on purge.
** Attachment added: "amavisd-new_2.6.1.dfsg-2ubuntu2_second-attempt.debdiff"
http://launchpadlibrarian.net/21706280/amavisd-new_2.6.1.dfsg-2ubuntu2_second-attempt.debdiff
--
amavisd-new broken user (again) Intrepid
htt
I have this bug in jaunty.
apt-cache policy bacula
bacula:
Installiert: 2.4.4-1ubuntu2
Kandidat: 2.4.4-1ubuntu2
Versions-Tabelle:
*** 2.4.4-1ubuntu2 0
500 http://de.archive.ubuntu.com jaunty/main Packages
100 /var/lib/dpkg/status
--
package bacula-director-pgsql 2.2.8-5ubu
** Description changed:
I was just surfing the web when my computer decided to reboot itself
without any warning, not a brutal one but a clean reboot with an ubuntu
shutdowning screen. I'm under Hardy Heron 8.04.1
Here is what I found in my syslog :
Jul 30 13:51:17 mars -- MARK --
J
Public bug reported:
Ubuntu Version: 8.10 (Duo boot with Microsoft Windows Vista SP1, Hosted
from Windows Vista, Host Drive = 29.4 GB)
Last update: 2009-01-28 02:20 AM
Update Package: (I don't remember)
Computer Model:
IBM Thinkpad Z61T
Intel Core Duo T5600(1.83GHz)
3 GB (
** Description changed:
- After successfully builting an ixp4xx image with Ubuntu's d-i, and
- flashing that image via upslug2, my NSLU2 refushed to boot. It seems the
+ After successfully building an ixp4xx image with Ubuntu's d-i, and
+ flashing that image via upslug2, my NSLU2 refused to boot.
Is regarding the kdepim...
** Tags added: packaging regression
** Changed in: kdepim (Ubuntu)
Sourcepackagename: None => kdepim
--
Kmail /akonadi not working - kmail: symbol lookup error:
https://bugs.launchpad.net/bugs/322209
You received this bug notification because you are a member of Ubunt
** Changed in: kdebase-runtime (Ubuntu)
Sourcepackagename: None => kdebase-runtime
Status: New => Confirmed
** Description changed:
-
"DU DU DUUMM DUUM DU! du du du."
This are, in fact, not the sounds of tribal people attacking our
village;
Instead, this are the
Chris, you mention that you saw the regression going from 10.1 to 10.3.
None of the quirks in this 10.2 upload match your hardware so I think
it's highly unlikely this bug caused your failure. Maybe 10.3 did it.
--
Please update quirks for -intel to Intrepid
https://bugs.launchpad.net/bugs/31667
I just wanted to tell you that during boot udev complains about
missing /dev/card0 (or /dev/dri/card0?).
I'm still at ~ 450 fps in glxgears on GMA950, Core Duo and 2 GB RAM.
Regards
Vit Pelcak
--
[i945] 2.5.1 driver poor performance
https://bugs.launchpad.net/bugs/303011
You received this bug n
** Changed in: gedit (Ubuntu)
Importance: Undecided => Low
Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs)
Status: Confirmed => Triaged
--
spell check uses wrong English dictionary
https://bugs.launchpad.net/bugs/315562
You received this bug notification because you ar
Public bug reported:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
This package is needed to help build d-i on ARM.
affects ubuntu
status confirmed
importance wishlist
subscribe ubuntu-archive
Please sync micro-evtd 3.3.3-6+lenny3 (universe) from Debian unstable
(main).
Changelog since curr
Cody, you commented on this package during the hardy freeze - is there
any chance that you have time to look at this now for jaunty?
--
Please update to latest 0.6
https://bugs.launchpad.net/bugs/193818
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribe
Thank you for taking the time to report this bug and helping to make
Ubuntu better. Please try to obtain a backtrace following the
instructions at http://wiki.ubuntu.com/DebuggingProgramCrash and upload
the backtrace (as an attachment) to the bug report. This will greatly
help us in tracking down y
I have the same problem.
> What version of Ubuntu are you running?
My ubuntu server is up to date (LTS version): 8.04
I saw this bug when I gave my virtual machine more memory (2GB instead
of 1GB)
--
dmesg is flooded with warnings in kvm/mmu.c
https://bugs.launchpad.net/bugs/243393
You received
@Carlos:
Keep in mind that NFS3 and NFS4 are very different. My workaround with
the port option is only intended for NFS4. NFS4 uses a single TCP
connection for communication between client and server. Portmapper (with
rpcbind) is not needed for NFS4. "My" internal error (for NFS4) is
caused by th
** Attachment added: "patch: option to not automatically maximize new windows"
http://launchpadlibrarian.net/21707193/maximus-only-maximized.patch
--
[PATCH] option to not automatically maximize new windows
https://bugs.launchpad.net/bugs/36
You received this bug notification because you
Public bug reported:
Binary package hint: maximus
Included is a patch that gives the user the option to not maximize every
newly opened window. Windows that are opened already maximized are
still undecorated as expected.
The attached patch is against maximus version 0.4.2~ppa1 from the
netbook-
Public bug reported:
Binary package hint: openoffice.org
I'm using Kubuntu 8.10 and te Oo package is: openoffice.org-core
1:3.0.1rc1-2ubuntu2intrepid1.
Can't export MediaWiki or XHTML format. It says "Error exporting the
document Untitled1: Write Error. The file could no be written".
I've found
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/21707190/Dependencies.txt
--
Can't export anything except pdf
https://bugs.launchpad.net/bugs/35
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bug
No handlers could be found for logger "bzr"
[Updating] micro-evtd (3.3.3-6+lenny2 [Ubuntu] < 3.3.3-6+lenny3 [Debian])
* Trying to add micro-evtd...
-
- http://ftp.debian.org/debian/>
- http://ftp.debian.org/debian/>
I: micro-evtd [universe] -> micro-evtd_3.3.3-6+lenny2 [universe].
I: micro-
due to the incomplete upload of kde-4.2, will be fixed soon
** Changed in: kdepim (Ubuntu)
Status: New => In Progress
--
Kmail /akonadi not working - kmail: symbol lookup error:
https://bugs.launchpad.net/bugs/322209
You received this bug notification because you are a member of Kubuntu
B
** Visibility changed to: Public
--
notification-daemon crashed with SIGSEGV in calloc()
https://bugs.launchpad.net/bugs/322207
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
htt
Yelp comes from upstream Gnome, and is distro-neutral by default. Any
branding you see in Ubuntu is the result of Ubuntu specific patches
applied to the distr-neutral upstream code, therefore, there is no issue
here.
** Changed in: yelp (Ubuntu)
Status: New => Invalid
--
Yelp contains ref
Chris, I've reopened the bug that resulted in the change that appears to have
caused your issue. It would be good if you could join the discussion on that
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=17292
** Bug watch added: freedesktop.org Bugzilla #17292
https://bugs.freedesktop.org/
@Attila --- would it correct to say that the primary issue here is that
Espeak needs OSS and this is not loaded automatically, and sorting that
out needs manual steps not trivial for regular user. Even less so for
the sight-impared. Everything is good once those modules are loaded?
--
In Jaunty
Public bug reported:
Unpacking libnspr4-dev (from .../libnspr4-dev_4.7.3-0ubuntu2_amd64.deb) ...
dpkg: error processing
/var/cache/apt/archives/libnspr4-dev_4.7.3-0ubuntu2_amd64.deb (--unpack):
trying to overwrite `/usr/share/aclocal/nspr.m4', which is also in package
kompozer-dev
dpkg-deb: sub
** Attachment added: "DpkgTerminalLog.gz"
http://launchpadlibrarian.net/21707307/DpkgTerminalLog.gz
--
package libnspr4-dev None [modified: /var/lib/dpkg/info/libnspr4-dev.list]
failed to install/upgrade: trying to overwrite `/usr/share/aclocal/nspr.m4',
which is also in package kompozer-de
*** This bug is a duplicate of bug 295544 ***
https://bugs.launchpad.net/bugs/295544
Thank you for your bug report. This bug has already been reported, but
please feel free to reporta ny other bugs you find.
** Changed in: acpi-support (Ubuntu)
Status: New => Invalid
** This bug has b
** Changed in: xserver-xorg-video-intel
Status: Unknown => Confirmed
--
[i915GM] Regression in xserver-xorg-video-intel version 2.4.1-1ubuntu10.3
https://bugs.launchpad.net/bugs/320893
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu
180.25 still does not add support for Xorg 1.6, so you'll still need to
add the following to your xorg.conf:
Section "ServerFlags"
Option "IgnoreABI"
EndSection
--
nvidia 180.* driver inhibits resume from suspend
https://bugs.launchpad.net/bugs/306315
You received this bug notificati
Can you please try again, this time with 'Do not remove temporary files'
checked in the Preferences dialog ? After the error, go to the temporary
directory (/tmp), and run the following commands:
$ mencoder -nocache -noskip -mc 0 -nosound -ovc copy -of lavf -lavfopts
format=mp4 -o video.mp4 video
That's unusual, and doesn't look like a hal-info bug, but let's keep it for
now. If the device doesn't even automount, can you please do the debugging
steps in
https://wiki.ubuntu.com/DebuggingRemovableDevices
? Thank you!
** Changed in: hal-info (Ubuntu)
Assignee: (unassigned) => Marti
[Updating] missingh (1.0.3.1 [Ubuntu] < 1.0.3.2 [Debian])
* Trying to add missingh...
- http://ftp.debian.org/debian/>
- http://ftp.debian.org/debian/>
I: missingh [universe] -> libghc6-missingh-dev_1.0.3.1 [universe].
I: missingh [universe] -> missingh-doc_1.0.3.1 [universe].
** Changed in:
1 - 100 of 1918 matches
Mail list logo
