>From what I can determine, this is all either fixed or covered in
another bug I'm working on.
** Changed in: kde-guidance (Ubuntu)
Status: Confirmed => Fix Released
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bu
This bug is NOT the one currently in Hardy Heron alphas, even if it
seems the same.
Hardy comes with a new version of Xorg that uses a different structure for
/etc/X11/org.conf. Here's the problem.
If you want to follow the Hardy bug, please register to bug #173768
--
'Monitor & Display' module
** Tags added: kde-guidance-displayconfig
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification because you are a member of Kubuntu
Team, which is subscribed to kde-guidance in ubuntu.
--
kubuntu-bugs mailing li
Kubuntu Hardy alpha 4 live session - most of kcontrol wont work due to
missing libpython2.5.so problem. sudo ln -s /usr/lib/libpython2.5.so.1.0
/usr/lib/libpython2.5.so solves it.
After that most of kcontrol work pretty well, except of monitor &
display applet due to this bug:
https://bugs.launch
During the a fresh install of the Hardy heron alpha 3 this bug surfaces
again on my system.
CPU AMD athlon 64 3200 +
ATI X800 pro.
2 GB RAM.
Error message supplied by "display properties" in Kubuntu.
The module monitor and display could not be loaded.
The diagnostics is:
Library files for libpy
I was trying to output to a second display and discovered that there is
no way to click "Accept" when changing settings in Monitor & Display.
When i run kcontrol from the konsole i get these error messages when
clicking on the checkbox to enable dual displays:
Original exception was:
Traceback (mo
I have the same problem and was able to locate the cause I think.
I'm using two monitors and have the following device section in the
xorg.conf.
Section "Device"
Identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go
7300]"
Driver "nvidia"
BusID
I upgraded from Feisty (with the problem) to Gutsy Beta. The problem is
still present.
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kde
On Kubuntu Gutsy Beta it seems to be fixed. I did not have these problems
anymore with the live version.
Shall we mark it as fixed?
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification because you are a member
Yuriy, I did not get the same error messages.
I attached the output of the commands:
:~$ kcmshell displayconfig
:~$ sudo kcmshell displayconfig
For :~$ systemconfig
I didn't get anny errors.
Hope I could help the project.
Note: I'm still using the daily release from 3 days ago (09-21) since i
Josef, do you have the same error in the terminal (please post, as an
attachment), or just in the GUI?
There are a couple different bugs posted in the comments here, and the error in
the GUI provides no useful information. Developers need the python trace from
the console output both to tell ap
I got the same problem with Gutsy alpha daily-release from 2007-09-21.
I tested the live CD. Since it did not give me the right resolution I tried to
change it.
But the module Monitor & Display could not be loaded. Same error as in the
bugreport.
--
'Monitor & Display' module in System Setting
I was having a very similar problem. If I had *only* the GLX module
loaded, my screensaver would not work, and the "Monitor & Display"
module would not load. I now have this in my modules section and all is
well:
Section "Module"
Load "i2c"
Load "bitmap"
@noisymime
Running displayconfig from terminal sometimes gives some helpful
information about the problems origin.
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification because you are a member of Kubuntu
Team, w
@awen
I'm on Gutsy Tribe 5 and experiencing this problem however I already had
python2.5-dev installed so something else is causing the issue here
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification because you
The problem witch is originally described in the bug description is
still present in kubuntu gutsy tribe 5. However installing python2.5-dev
fixes the problem on gutsy (installs a missing libpython2.5.so file).
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpa
There seem to be two separate issues here. I've managed to find a fix
in some of the ubuntu forums for the first issue, and while I don't have
the links, I can share them here as I've just put them into practice
this morning:
TO THOSE WITH THE "BadDevice" ERROR:
I fixed this error by removing a
I get a similar problem with several applications. For instance, if I
run xpdf, I get sometimes, after I quit:
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1e0007e
and at other occasions:
Warning: Attempt to remove nonexistent passive g
zakanozz: In the future, please add long output as an attachment. Also,
if you are having a problem with wineconfig (you just said it works)
please file a separate bug.
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug no
Its kinda long.
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 145
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 145
Minor opcode: 3
Resource id: 0x0
Failed to op
zakanozz: Could you also attach the output of "kcmshell wineconfig"? I
find it unlikely that you are experiencing the same bug with wineconfig
as with displayconfig.
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notif
Hi, I am getting the same thing and been searching all over tonight
trying to find a fix. It is affecting my 'Monitor & Display' and
'Windows Applications' links in the 'System Settings'. I installed
Kubunutu 7.04 two nights ago. Have all current updates that it would let
me get.
Here are my resul
** Changed in: kde-guidance (Ubuntu)
Importance: Undecided => Medium
Status: Needs Info => Confirmed
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification because you are a member of Kubuntu
Team, which
I have the same problem
- I did a fresh Kubuntu Feisty install
- I installed nvidia-glx drivers for my Geforce ti 4200
- When I open "System Settings" and click "Monitor & Display", it crashes.
- This is the output of "kcmshell displayconfig":
[EMAIL PROTECTED]:~$ kcmshell displayconfig
X Error:
I too have this problem. I noticed it after the upgrade to feisty, but
it may have existed in edgy. I had never had any need to muck with my
monitor settings until after the upgrade though.
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
Yo
Thanks sebas, that worked!
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kde-guidance in ubuntu.
--
kubuntu-bugs mailing list
[EMAIL P
On Friday 20 April 2007 14:13:39 Stephan Rave wrote:
> By the way, this is really annoying! I can set up xorg.conf so that
> everything works fine. But as soon as I start a kde-session, everything
> is messed up again.
You can delete ~/.kde/share/config/displayconfigrc as a temporary workaround.
-
By the way, this is really annoying! I can set up xorg.conf so that
everything works fine. But as soon as I start a kde-session, everything
is messed up again.
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification
Same Problem here. (I have a Geforce Ti 4200) It seems, displayconfig
cannot get any sensible information from the system: I can choose every
resolution I want to, but the refresh rates are messed up. For example,
at 1280x1024 it offers 50Hz, 51Hz, 56Hz, while the monitor runs at 75Hz
and should ru
I have got this bug too.
I have installed ubuntu feisty final, and then the kubuntu-desktop. I
played for a while with gnome and compiz and then started kde. Now I
cant change my resolution to 1280x1024.
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/
Hi Guys,
I am still not seeing the correct data in the Monitor & Display tool.
Only the Power Saving settings are correct, the rest bear no relation to
the reality. It says 640x480 and vesa driver, when it is 1680x1050
nvidia-glx. Could this be a problem with the SLI? My media PC works fine
with n
Okay, will do. Sorry about that.
Good luck with this one!
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kde-guidance in ubuntu.
--
ku
Nathan: that output is normal when running KDE programs from a terminal.
Don't know why it happens, but it's not a sign of breakage. The problem
is the errors that come after that.
newtux: your error does not looks the same as Tom's, please file a
separate bug.
--
'Monitor & Display' module in
I don't think this bug is specific to kde-guidance as I get similar
output when trying to run Quanta plus in Edgy. I may be completely off
base on that though.
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 147
Minor opcode: 3
Resource id: 0x0
Failed to open d
Hello,
Im also getting the same error running Feisty with nvidia-glx
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 147
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 147
Hi there,
I get a similar error here but with a slightly different configuration:
Kubuntu Feisty (current) but with the fglrx ati driver from the
2.6.20-14 restricted package. The error messages on my system are in
German but they would translate roughly to what was stated here in the
discussion.
aracon, do you get the same output as Tom?
--
'Monitor & Display' module in System Settings is not working.
https://bugs.launchpad.net/bugs/88431
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kde-guidance in ubuntu.
--
kubuntu-bugs maili
Thank you for filing this bug.
Could you post the output you get when running it from the command line
with "kcmshell displayconfig"?
** Changed in: kdebase (Ubuntu)
Sourcepackagename: kdebase => kde-guidance
Status: Unconfirmed => Needs Info
--
'Monitor & Display' module in System Setti
Yuriy,
I have all of the latest updates as of 02:24 GMT, from the UK server. I had
guidance 0.8.0 ubuntu2 before my last update, and so the situation is the
same?
It does load the dialog now when you don't sudo it, but the xorg.conf settings
within it are incorrect (640x480 & VESA etc). The po
Yuriy,
I have all of the latest updates as of 02:24 GMT, from the UK server. I had
guidance 0.8.0 ubuntu2 before my last update, and so the situation is the
same?
It does load the dialog now when you don't sudo it, but the xorg.conf settings
within it are incorrect (640x480 & VESA etc). The po
Oops, that might be slightly confusing. Basically, I meant that nothing had
changed since this morning. i.e. it was showing the dialog where before it
wasn't at all, but it doesn't reflect what is actually happening in the
system, and it still refuses to load if you sudo it.
T.
On Monday 2 Apr
A new version of guidance (0.8.0) was just released into Feisty. Could
you upgrade and try again?
--
'Monitor & Display' module in System Settings is not working.
https://launchpad.net/bugs/88431
--
kubuntu-bugs mailing list
kubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listin
Hey Yuriy,
kcmshell displayconfig
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 147
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 147
Minor opcode: 3
Resource id: 0x
Thank you for filing this bug.
Could you post the output you get when running it from the command line
with "kcmshell displayconfig"?
** Changed in: kdebase (Ubuntu)
Sourcepackagename: kdebase => kde-guidance
Status: Unconfirmed => Needs Info
--
'Monitor & Display' module in System Setti
Hi,
What does the GLX extension do, some kind of OpenGL stuff? If you turn it off
in xorg.conf can you then not do exciting Beryl things / play games?
T.
On Tuesday 20 March 2007 21:42:14 aracon wrote:
> Same probleme here on kubuntu edgy after installing and running the
> latest nvidia driver
Same probleme here on kubuntu edgy after installing and running the
latest nvidia driver (9755). The problem appears just with GLX
extension, without the module behaves quite normal.
--
'Monitor & Display' module in System Settings is not working.
https://launchpad.net/bugs/88431
--
ubuntu-bugs
** Changed in: Ubuntu
Sourcepackagename: None => kdebase
--
'Monitor & Display' module in System Settings is not working.
https://launchpad.net/bugs/88431
--
kubuntu-bugs mailing list
kubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
47 matches
Mail list logo
