This bug still affects me with U14.04 and an addon pcie usb3 card. The
solution that worked for me was the script in #61 (thanks Dale).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
XH
I don't believe this issue still exists personally. My Lenovo W510
suspends absolutely fine with Precise (12.04). I have tested with the
3.5 kernel as well without issues.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.
This still affects 13.04, latest kernel. SUpport compiled into the
kernel - no way to disable the module as a workaround.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
XHCI (USB 3.0) k
Kernel 3.5.0-24-generic is still affected. After recompiling the kernel with
xhci as a module fixes the Problem.
So I suggest to change the default config.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bug
I seem to have the same issue with 12.10, kernel 3.5.0-19-generic. this
is what I get in dmesg when trying to suspend:
[ 40.213352] xhci_hcd :02:00.0: WARN: xHC CMD_RUN timeout
[ 40.213370] suspend_common(): xhci_pci_suspend+0x0/0x40 returns -110
[ 40.213373] pci_pm_suspend(): hcd_pci_su
Could someone change this bug back to "Confirmed" on Ubuntu Oneiric? It
is not fixed and makes for example HP Elitebooks unusable.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
XHCI (U
It sounds like a new bug has been introduced; this bug was tracking the
lack of PM support in the xhci stack.
If you're experiencing a problem that is resolved by adding xhci_hcd to
SUSPEND_MODULES, please file a new bug, and post the bug number here so
folks can find it.
Thanks!
--
You receive
There is a fix released for this? It hasn't made its way into Ubuntu
then. Klugy hacks are still required to suspend on most modern laptops.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
Recently (in a couple of weeks) this bug has appeared in Natty on HP
Elitebook 8540p. rmmoding xhci_hcd before suspend helps. Looks like a
regression.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/5229
I have also been experiencing this bug in Oneiric (like #56). Can we
reopen this bug for Oneiric?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
XHCI (USB 3.0) kernel Module Prevents Su
Additionally, the solution in comment #61 works perfectly for with
hibernate, although hibernate takes forever to enter into and come out
of (almost as much time as a shutdown and restart, with the exception
that your applications all come back).
--
You received this bug notification because you
I have a Lenovo Thinkpad W510, and the following works flawlessly for
me:
1) As root/sudo, create /etc/pm/sleep.d/20_custom-xhci_hcd with the
following contents:
#!/bin/sh
# File: "/etc/pm/sleep.d/20_custom-xhci_hcd".
TMPLIST=/tmp/xhci-dev-list
case "${1}" in
hibernate|suspend)
echo
@Simon
What is shown on resume if it freezes is non-deterministic. I guess it
sometimes shows the log messages that where displayed just before suspend.
Sometimes the screen is blank.
@d3mia7
After more and more testing, I don't believe that I postet in the correct bug
report. I found out that
Markus / Simon: Do you believe your problems have any relation to your
USB 3.0 hardware? Note that this is not a general purpose bug for
troubleshooting resume issues.
This bug only covers the specific case of a system with a USB 3.0
controller using the XHCI driver not being able to suspend with
Markus, can you tell what exactly is being displayed after suspending?
I have to say that suspend worked for me a while ago (after having
upgraded my Thinkpad W510's BIOS) but now, I'm experiencing a similiar
(if not the same) issue like you: When I press the power button (turn
it on again) or open
I am also affected by this problem (or not?) using Natty (fresh
install) on my new ThinkPad X220 with i7 and usb 3.0.
The proposed workaround by adding SUSPEND_MODULES="xhci_hcd" to
/etc/pm/config.d/unload_module did not work for me.
I tried a lot and found out that suspend to ram works if I dis
This bug is showing up on Oneiric with x220 i7 + USB3. The fix mentioned
in the description works...regression in Oneiric kernel?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
XHCI (US
I'm seeing this on a fresh Natty upgrade. Kernel 2.6.38-8. Removing
xhci_hcd makes suspend work again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
XHCI (USB 3.0) kernel Module Preven
>From what I've seen so far on a fresh install of Natty on my Thinkpad
W510, suspend/resume works fine, even after a few tries in a row.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
X
Just installed Natty - still had to perform the fixes on Comment #47's
forum link in order to get suspend/hibernate working on my ASUS U43F-
BBA6.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
By the way, in Natty (11.04), I had to remove the iwlagn part on the
SUSPEND_MODULES while running the newest kernel. If I didn't, Network
Manager would sit there saying, "Authorizing" forever.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to U
On my GA-770T-USB3 motherboard, adding exactly SUSPEND_MODULES="xhci-
hcd" to the exact file /etc/pm/config.d/unload_module works extremely
well for me on Maverick with kernel 2.6.35-25-generic.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
USB 3.0 Power Management support landed in 2.6.37, and was pulled into
natty, marking that task Fix Released. Marking the Maverick/Lucid tasks
as won't fix as these changes have been found to be too intrusive to
backport.
** Changed in: linux (Ubuntu Natty)
Status: Triaged => Fix Released
** Changed in: oem-priority
Assignee: Canonical Kernel Team (canonical-kernel-team) => Chris Van Hoof
(vanhoof)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
XHCI (USB 3.0) kerne
ptha workaround did the trick for me. Thanks (asus N53J)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
XHCI (USB 3.0) kernel Module Prevents Suspend
--
ubuntu-bugs mailing list
ubunt
I'm running Ubuntu 10.10 on a Sager laptop and also have this problem.
Adding the script to /etc/pm/sleep.d/ to unload/reload the xhci_hcd module
seems to solve the problem for me.
After reading the comments, I'm not sure if it's better to add xhci_hcd to
SUSPEND_MODULES.
--
You received this b
Hi all, I'm running 10.10 on an Asus N61JQ laptop. Here are the steps
I've taken to get suspend/hibernate working on my laptop. For
hibernate, I had to resize my swap as it had been created smaller than
my actual RAM size. I tried adding SUSPEND_MODULES="xhci_hcd", which
helped but did not resolve
Jerome, either seems to work fine (other than the occasional hang). If
you look at the modprobe man page, it says that _ and - are synonymous.
Although I guess it's better to use _, since that's what all the module
names show when you do lsmod.
--
You received this bug notification because you ar
Martin, you wrote SUSPEND_MODULES="xhci-hcd" instead of
SUSPEND_MODULES="xhci_hcd". Could that be a problem ?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/522998
Title:
XHCI (USB 3.0) kernel Module
As mentioned by Jerone Young in comment #28, I've noticed that even with
SUSPEND_MODULES="xhci-hcd" in unload_modules, once in a while, after a
few suspend/resume cycles, My Thinkpad W510 maverick system will hang
while trying to suspend, and has to be hard powered off. This is bad.
I don't run an
** Tags added: hwe-blocker
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ub
** Also affects: linux (Ubuntu Natty)
Importance: Medium
Status: Triaged
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs ma
Gabou: if I'm not mistaken, the SUSPEND_MODULES fix above does exactly
that.
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Temporary fix
(Please note the _ in xhci_hcd)
On Ubuntu 10.10
# Be root
sudo su
# Edit this file
vim /etc/pm/sleep.d/05_xhci
Here is the content of this file
#!/bin/sh
# Fix some issues with USB3
if [ "$1" = "suspend" ]
then
modprobe -r xhci_hcd
fi
if [ "$1"
When adding "echo disable > /sys/firmware/acpi/interrupts/gpe01" to
/etc/rc.local don't forget to change the execution bit with $ chmod u+x
/etc/rc.local
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a me
> We *may* be able to just grab the "power management implementation"
patches
Nope, we're missing some prerequisites for these patches, so can't do a
trivial backport.
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification becau
In other news, the Natty kernel has recently been uploaded, it's based
on 2.6.37-rc1, which will have these patches. If you can, please try
this kernel with USB 3 suspend/resume and let me know how it goes.
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
Yo
OK, looks like we've got the XHCI power management patches upstream in
2.6.37-rc1:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=5cc103506289de7ee0a0b526ae0381541990cad4
Unfortunately, it looks like there's be quite a few xhci updates to
backport if we were looki
Bug confirmed still present in Maverick release (not that we were expecting
anything different - wouldn't have been feasible).
For me, the offending device is an UPEK fingerprint reader. Workaround works
as expected.
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/b
I should've added to my previous post - the workaround for Maverick did work on
my Thinkpad W510.
(adding SUSPEND_MODULES="xhci-hcd" to /etc/pm/config.d/unload_module)
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification becau
** Changed in: ubuntu-release-notes
Status: Confirmed => Fix Released
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
@Robbie and @Martin,
Since running out of time before Maverick releases, I updated the Release
Notes. :) Please see the following and review for accuracy:
https://wiki.ubuntu.com/MaverickMeerkat/ReleaseNotes#Boot,%20installation,%20upgrade%20and%20post-install
cheers
Jeff Burns
--
XHCI (USB
@Robbie: Apparently, the module has been renamed "xhci_hcd". Perhaps
that should be indicated in the release notes?
** Changed in: ubuntu-release-notes
Status: Fix Released => Confirmed
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received th
Release noting for 10.10:
When the XHCI module is loaded for USB 3.0 operation the system cannot suspend.
Manually unloading XHCI will allow suspend to complete normally. To avoid
future suspend problems, the workaround is to add:
SUSPEND_MODULES="xhci"
to /etc/pm/config.d/unload_module then t
Sorry if this has already been addressed:
Running 10.04 on Lenovo 3000 V100, machine was going into suspend without
issues until I upgraded the kernel to 2.6.32-25-generic a couple of days ago. I
tried the solution on post #13 but it gives me:
bash: /sys/bus/usb/devices/usb1/power/wakeup: Permis
Marking this for the 10.10 release notes, seeing how it's unlikely to be
fixed by the release date.
** Also affects: linux
Importance: Undecided
Status: New
** Changed in: linux
Status: New => Invalid
** Also affects: ubuntu-release-notes
Importance: Undecided
Status:
** Also affects: linux (Ubuntu Maverick)
Importance: Medium
Status: Triaged
** Also affects: linux (Ubuntu Lucid)
Importance: Undecided
Status: New
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification becau
I was getting the messages:
pm_op(): usb_dev_freeze+0x0/0x20 returns -2
PM: Device usb9 failed to freeze async: error -2
This is an usb 3.0 port on a new computer with Ubuntu 10.10
The proposed workaround:
create files : /etc/pm/config.d/00sleep_module and
/etc/pm/config.d/unload_module
add line
The next version of the patchset (v6) has been posted:
http://article.gmane.org/gmane.linux.usb.general/35579.
Jerone: I'm sure that upstream will welcome extra testing, but there has
not been any requests for such. No news on any progress in inclusion
into mainline, unfortunately.
--
XHCI (USB
@Jeremy
Unfortunetly it's not. The reason is we have seen that unloading
the module can have bad effects at times when doing multiple suspends.
The safest way is to have the suspend code in the driver.
Do you know if upstream is looking for testing to help move
inclusion along?
--
Jerone - the linked patch is version 4; there is a v5 of that series on
linux-usb at the moment (http://www.spinics.net/lists/linux-
usb/msg33949.html, we'll probably need the rest of that series too). It
looks like there are still a few issues to be sorted out before this
series will be merged.
To help someone working on this on the community side. If you look in
drivers/usb/host/xhci-pci.c you will find comments " suspend and resume
implemented later" in structs hc_driver xhci_pci_hc_driver &
xhci_pci_driver where there should be function pointers to functions so
that it can suspend.
T
I have the same issue on Dell Latitude Z600 - at least, I see dmsg lines
that hint of the same problem. However, the workarounds listed above do
not make my laptop suspend.
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification b
** Changed in: oem-priority
Status: New => Triaged
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@li
I just gave it a try. Unsurprisingly, this firmware update hasn't
resolved this issue.
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bug
I just noticed the following firmware update for the NEC USB 3.0
controller for the Thinkpad W510 at
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-75165
Version 3.0.2.5
* (New) Initial release
* (New) Mass Storage Class UAS (USB Attached SCSI) is supported.
* (Fi
Agreed, this is probably not fixable in terms of total functionality
under Lucid (and possibly not even under Maverick), however there needs
to be some sort of workaround in place especially as this is an LTS
release. Within 6 months USB 3.0 ports will start to become standard
across the board.
I
** Tags added: kernel-reviewed
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://list
I set this to triaged and leave the Lucid nomination open for now. This
falls in the category of "we cannot fix this" as upstream did not
implement it. Maybe there is some development there in the Maverick
cycle or not. But that is totally open.
** Changed in: linux (Ubuntu)
Importance: Undecid
As mentioned in comment #5, the driver code explicitly states that
suspend/resume will be implemented later (whenever that will be, has not
changed as of today), so the work-around is the way to go until then.
Depending on the impact of changes if this happens, this might or might
not be applicable
I did a fresh install, and then this worked.
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.co
I have the w510 and none of these workarounds worked for me.
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs
Wasn't aware that I had USB 3.x ports, I don't any have USB 3.x
devicesalso I don't think I've ever used the USB ports on the laptop
(except to charge my phone when I'm traveling).
Well, I actually, I guess I have used the USB portsbut only so that
I could disable the beeper on some UPSs f
@TheDreamer - with this method do your USB 3.x ports work after resume?
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I have a Lenovo 3000 V200 laptop, and I used:
echo disabled > /sys/bus/usb/devices/usb2/power/wakeup
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
@Lukas
When you do this does the camera usable after suspsend ? I suspect
it will not be.
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu
echo disabled > /sys/bus/usb/devices/usb1/power/wakeup
solves the problem on Lenovo 3000 V100 laptop. The problematic device is
the integrated camera:
Bus 001 Device 002: ID 0402:5602 ALi Corp. Video Camera Controller
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/b
** Changed in: oem-priority
Assignee: Canonical Platform QA Team (canonical-platform-qa) => Canonical
Kernel Team (canonical-kernel-team)
** Changed in: linux (Ubuntu)
Assignee: (unassigned) => Canonical Kernel Team (canonical-kernel-team)
--
XHCI (USB 3.0) kernel Module Prevents Susp
** Changed in: oem-priority
Assignee: (unassigned) => Canonical Platform QA Team
(canonical-platform-qa)
** Changed in: oem-priority
Importance: Undecided => Medium
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification
** Tags added: lenovo
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.
** This bug is no longer a duplicate of bug 515109
cannot suspend usb devices on lucid
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-
*** This bug is a duplicate of bug 515109 ***
https://bugs.launchpad.net/bugs/515109
** This bug has been marked a duplicate of bug 515109
cannot suspend usb devices on lucid
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug noti
please also have a look at the duplicate bug: The workaround
echo disable > /sys/bus/usb/devices/usb*/power/wakeup
also fixes the problem. Maybe this is a hint?
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you
Note that the module has been renamed "xhci_hcd" in the latest mainline
kernel (2.6.34-rc6).
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubun
Hi everyone,
Please mark this bug as affecting you rather than commenting about the
workaround - we know that manually unloading the module or adding
SUSPEND_MODULES="xhci" fixes the problem, but this is not the correct
solution. The XHCI driver either needs to have suspend implemented, or
Ubuntu
** Also affects: oem-priority
Importance: Undecided
Status: New
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing lis
System config: i7-930, Gigabyte x58a-ud7, Ubuntu Lucid Lynx 10.04 RC
USB 3.0 controller on ga-x58a-ud7 motherboard
create files : /etc/pm/config.d/00sleep_module and
/etc/pm/config.d/unload_module
add line to files : SUSPEND_MODULES="xhci" fixed my not hibernating problem.
Thank you
--
XHCI (
Martin, I added SUSPEND_MODULES="xhci" to
/etc/pm/config.d/00sleep_module (create the file if it doesn't exist),
have you tried that?
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs,
** Summary changed:
- XHCI (USB 3.0) Module Prevents Suspend
+ XHCI (USB 3.0) kernel Module Prevents Suspend
--
XHCI (USB 3.0) kernel Module Prevents Suspend
https://bugs.launchpad.net/bugs/522998
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
79 matches
Mail list logo
