*** This bug is a duplicate of bug 556204 ***
https://bugs.launchpad.net/bugs/556204
I can confirm this bug with Ubuntu 11.04 amd64 with all latest updates.
On a fresh install it the card worked without any problems just fine for
about 3 weeks. No it doesn't work anymore.
Always the "[ 228
*** This bug is a duplicate of bug 556204 ***
https://bugs.launchpad.net/bugs/556204
This is the workaround that worked for me:
start mythtv-setup and in the cards section tick the box 'open on demand'. Or
use mysql client and change the dvb_on_demand value in capturecard table:
mysql -umyth
*** This bug is a duplicate of bug 556204 ***
https://bugs.launchpad.net/bugs/556204
"tda1004x: timeout waiting for DSP ready" issue is still present in the
fresh install of Maverick.
t...@milasek:~$ dmesg | egrep '(tda1004x)|(DVB)|(saa7133)|(1-004b)'
[ 13.586981] saa7133[0]: found at
*** This bug is a duplicate of bug 556204 ***
https://bugs.launchpad.net/bugs/556204
(RE 22)
I don't expect it would help as the problem is the firmware is not loaded due
to startup interference with mythbackend . A candidate for workaround may be
delaying start of mythbackend - either for f
*** This bug is a duplicate of bug 556204 ***
https://bugs.launchpad.net/bugs/556204
That is odd. I don't suppose restarting the mythbackend service fixes the
issue?
On Fri, Jun 11, 2010 at 1:22 PM, Karel Marik wrote:
> *** This bug is a duplicate of bug 556204 ***
>https://bugs.launch
*** This bug is a duplicate of bug 556204 ***
https://bugs.launchpad.net/bugs/556204
(RE 20)
Thomas, the mythtv-backend.conf file was there and content was identical
as I left it yesterday. There is some strange interference between
mythtv and loading 'dvb-fe-tda10046.fw' firmware. Once I uni
*** This bug is a duplicate of bug 556204 ***
https://bugs.launchpad.net/bugs/556204
Can you check that the "and started udev-finish" is still there? I would
imagine that a mythtv upgrade would overwrite that.
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
*** This bug is a duplicate of bug 556204 ***
https://bugs.launchpad.net/bugs/556204
Sadly, I have to add the next day I booted firmware was not loaded. I
tried it several time. I have to uninstall mythtv and using MeTV which
has no conflict with 'dvb-fe-tda10046.fw' firmware. I will test myth
I upgraded to Lucid and the problem is still present. It seems
mythbacked started before firmware is loaded. I wonder if this bug may
relate to this one - https://bugs.launchpad.net/mythbuntu/+bug/556204
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You receive
Workaround indicated in https://bugs.launchpad.net/mythbuntu/+bug/556204
resolved my issue. Modify /etc/init/mythtv-backend.conf as follows:
Replace line
start on (local-filesystems and net-device-up IFACE=lo)
with
start on (local-filesystems and net-device-up IFACE=lo and started udev-
finish)
*** This bug is a duplicate of bug 556204 ***
https://bugs.launchpad.net/bugs/556204
** This bug has been marked a duplicate of bug 556204
myth-backend started before kernel driver it needs
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received this
Doesn't seem to work in my case. Well not every time at least. I'll keep
it for a while and monitor how it works.
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
I got this firmware from Ubuntu Hardy, copy it to /lib/firmware.
It is working for me in Lucid as it did in Hardy.
** Attachment added: "Firmware for the Philips SAA7131/SAA7133/SAA7135 TV
Tunner"
http://launchpadlibrarian.net/49168346/dvb-fe-tda10046.fw.tar.gz
--
tda1004x: timeout waiting
Tried kernel above (v2.6.34-rc7-lucid) - no change whatsoever - I am at
a loss as to the cause but notice when trying to tune the card the
signal/noise bar is at 100% on this card while it varies on my A16D card
that works OK (removed at the moment while trying to get the 007 going
--
tda1004x: t
Typo alert!
Sorry I made a typo in the above link to the PPA repository should be
ubuntu NOT ububtu
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
Lucid Mythbuntu is displaying same bug - firmware is there in
/lib/firmware but fails to load (see dmesg below). from other threads I
have come across some PPA kernels that seem to address this & am going
to attempt to use one of these. They can be found @
http://kernel.ububtu.com/~kernel-ppa/mainl
The problem didn't seem to be fixed by Lee's workaround after all.
Anyway, I recently migrated to Lucid and assumed bu the fast boot that
the problem was gone. However, my syslog says:
May 16 19:18:51 Internetdatorn kernel: [ 17.560017] tda1004x: timeout waiting
for DSP ready
May 16 19:18:51 In
Well, I tried to assign this bug to V4L project
(http://www.linuxtv.org/). However, it seems this project is not listed
/ supported by launchpad.
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received this bug notification because you are a member of Ubuntu
I don't use mythtv but I've also been having the timeout issue. Lee's
workaround works for me whereas the fix of Jose Catre-Vandis from
http://ubuntuforums.org/showthread.php?t=1316032&page=3 does not.
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received
Marc,
I agree it is probably kernel or firmware issue. What should i do in
such case? Should I nominate this bug for another package? Which one? I
am not skilled in symptom vs. package assignment. In any case, this
issue is associated with mythtv. Other viewers (e.g. MeTV) works fine.
===
I'm having similar problems - may be related to this:
http://www.linuxtv.org/pipermail/linux-dvb/2008-June/026827.html ?
the following works around it for me:
blacklist tda1004x
then add:
/sbin/modprobe tda1004x
/sbin/modprobe -r saa7134_dvb
/sbin/modprobe saa7134_dvb
/sbin/restart mythtv-backe
Howdy, and thank you for helping to improve Mythbuntu. Unfortunately (or
fortunately, depending on your perspective), there is nothing that mythtv can
do about firmware loading. Reloading mythtv packages won't fix this problem
either... doing so simply provides another opportunity for the int
Problem still exists after recent upgrade to kernel 2.6.31-16. Mythtv works
fine after install but restart causes "tda1004x: timeout waiting for DSP ready"
..
[code]
[ 17.868020] tda829x 1-004b: setting tuner address to 60
[ 17.977334] tda829x 1-004b: type set to tda8290+75a
[ 18.205044] in
I have only discovered the problem on 32bit arch. not on 64bit arch.
Since I have backends on both architectures "running" right now.
===
Spec:
Dist: Mythbuntu 9.10
Packages: mythtv 0.22.0 (backend from Mythbuntu standard repo.)
Tv-card: ASUS My Cinema-P7131 Hybrid (Digital
I have been doing two consecutive installations of Mythbuntu 9.10 today.
The pattern is the same every time:
Finish fresh installation, reboot, scan of tv-picture+sound is ok, shutdown,
physically unplug IDE-dvd-drive, physically plug two IDE-HDD's, boot and the
firmware will not load.
dmesg-o
** Attachment added: "after many restarts and days: dmesg when firmware load
fails"
http://launchpadlibrarian.net/35917021/dmesg_suddenly_after_many_successful_restarts.txt
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received this bug notification b
** Attachment added: "dmesg after mythtv install - card is working"
http://launchpadlibrarian.net/35917004/dmesg_after-mythtv-install.txt
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received this bug notification because you are a member of Ubuntu
Bug
27 matches
Mail list logo
