I think I have the same problem. Vmware Workstation 5.5.0 on windows xp.
Running Intrepid Alpha 1 with 2.6.26-3 kernel. Booting is ok, but when I
want to login to GDM it stalls completly. I have logged my console ouput
to a file via the serial port for debugging, but cannot seem to find any
strange
I have booted the Intrepid Ibex Alpha 1 release into Virtualbox and got
the same results. Attached is my Vbox.log.
** Attachment added: "VBox.log"
http://launchpadlibrarian.net/15831861/VBox.log
--
kernel 2.6.26-2-generic crash
https://bugs.launchpad.net/bugs/244175
You received this bug not
Ok, I managed to get my console output via de serial port to a log file. I
think there are some serious errors within the log file. The log file is
attached to this posting.
When I log into my Alpha 1 on my vmware workstation the pc speaker gives me a
noise like disturbance on a radio and it tot
I have a comparable problem. When booting Intrepid Alpha on a VMware
Workstation 5.5.0 it does boot, but when I login the system hangs. I did
not have this problem when upgrading to Intrepid with kernel 2.6.19. I
know that there is a way to pipe the boot kernel messages to the vmware
serial port, b
I have installed Hardy Heron Alpha 4 on VmWare 5.5, but still get this bug. I
cannot seem to configure X to support a larger resolution than 800x600, while
my physical screen supports larger resolutions.
I have added a attachement wich contains the VESA entry's from
/etc/X11/Xorg.0.log.
If more
After login in under a failsafe GNOME session I am able to get a desktop with
xserver-xgl installed. Here I am able to run al the glx tools with succes from
the command line, but when exiting each of these tools I get the following
error:
XIO: fatal IO error 11 (Resource temporarily unavailable
I can confirm this bug on Dell Inspiron 6400 with Ati Mobility X1300 graphics
card with an Ubuntu Hardy Heron install updates until 28-01-2008.
When installing xserver-xgl packages I can login, but only see a blank screen
and an arrow, nothing more.
~$ uname -r
2.6.24-5-generic
~$ lspci | grep
That was my only work around as well. I will try to dive deeper into
this problem.
Peter
2008/1/16, Nanley Chery <[EMAIL PROTECTED]>:
> The only way I could get around the error and delete the job was to use
> the CUPS web interface ( I was prompted for my username and password, of
> course).
>
>
Ok, the fix worked for me.
Hardy Heron Alpha 2 install
Thx.
Peter
--
package libflickrnet2.1.5-cil 25277-5 failed to install/upgrade: subprocess
post-installation script returned error exit status 1
https://bugs.launchpad.net/bugs/182130
You received this bug notification because you are a mem
*** This bug is a duplicate of bug 182130 ***
https://bugs.launchpad.net/bugs/182130
I can confirm this bug on Hardy Alpha install.
Instellen van libflickrnet2.1.5-cil (25277-6) ...
* Installing 1 assembly from libflickrnet2.1.5-cil into Mono
! Assembly
/usr/share/cli-common/policies.d/libfl
Ok. So, could it be an option to install the latest binary from ati?
Or is that one broken too?
2008/1/10, Travis Watkins <[EMAIL PROTECTED]>:
> The fglrx driver is broken, it has nothing to do with how new your
> install is.
>
> --
> Hardy Alpha 2 - Compiz does not show window borders
> https://b
How can this be, when this is a alpha 2 install which is barely a
month old? And what do you suggest to fix it? Should Desktop Effects
work in Hardy Alpha 2 on Ati x1300?
Peter
2008/1/10, Travis Watkins <[EMAIL PROTECTED]>:
> That's a different problem. Your driver is broken.
>
> --
> Hardy Alpha
I can confirm this bug on a Dell Inspiron 6400 Dual Core 2 laptop with a ATI
Mobility X1300 graphics card. Updated until 9 januari 2008.
I cannot enable Desktop Effects. It results in the error "Desktop Effects could
not be enabled". When using the Compiz-fusion icon choosing for Compiz there
ar
Has anyone already tested this debdiff??
--
[Hardy] Race condition in Xgl startup process
https://bugs.launchpad.net/bugs/176515
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.
Public bug reported:
Binary package hint: xserver-xgl
I have installed xserver-xgl version 1:1.1.99.1~git20070727-ubuntu3 on a
fresh Hardy Heron Alpha 2 install with all updates until 02-01-08. My
hardware is a Dell Inspiron 6400 Dual Core with a Ati x1500 graphics
card. Kernel version is 2.6.24-
Public bug reported:
Binary package hint: cupsys
I am running Hardy Heron on a Dell Inspiron 6400 Dual Core 2 laptop. Using
kernel 2.6.24-2-generic and cupsys 1.3.4-2ubuntu3. I can add printers perfectly
and printing goes well too, but when I would like to cancel a print job I get
the followin
Adding myself to the pulse-rt group works for me. I have sound, but
/var/log/messages gives me:
Dec 28 21:28:17 HK-PH pulseaudio[5974]: main.c: setrlimit(RLIMIT_NICE, (31,
31)) failed: Operation not permitted
Dec 28 21:28:17 HK-PH pulseaudio[5974]: main.c: setrlimit(RLIMIT_RTPRIO, (9,
9)) failed
I can confirm this bug on a fresh Hardy Alpha 2 install.
Dell Inspiron 6400
Intel dual core processor
Kernel 2.6.24-2
If you want information or tests, I'll be glad to help.
Peter
--
[hardy] pulseaudio lacking proper access
https://bugs.launchpad.net/bugs/175028
You received this bug notificat
Public bug reported:
I am using Hardy Heron on a Dell Inspiron 6400 Intel Dual Core 2 laptop. Kernel
version is 2.6.22-14-generic. NetworkManager version is 0.6.5-0ubuntu10. When
booting eth0 is being deactivated and so is my wlan0. I can start this
interface from the command line with ifconfig
I am running Hardy Heron with kernel 2.6.22-14-generic on an Dell
Inspiron 6400 and having this problem since I installed kernel 2.6.24.
Now it does not matter wich kernel I boot, I am getting the error
message on my desktop. When starting hal on the command line there's no
problem.
If you would l
And this is the post
http://ubuntuforums.org/showthread.php?t=505554
But it does not give a resolution yet.
--
cannot burn cd's
https://bugs.launchpad.net/bugs/122200
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
I don't know if this is the same bug, but if I want to burn a image
(iso) to cd brasero and gnomebaker fail. They both say that "the medium
is not writable". The cd is a brand new CD-R and my burner is a DVD+-RW
TS-L632D.
brasero -g
(brasero:10585): BraseroBurn-DEBUG: At burn-medium.c:1176: Trying
I can confirm this bug on Inspiron 6400 dual core, 2048 Mb, Intel
Corporation 82801G
uname -r
2.6.22-10-generic
lspci -v | grep Audio
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
alsamixer
alsamixer: function snd_ctl_open failed for def
Hello Sebastian,
I have been out for a few days. After my upgrade from feisty to Gutsy
I got the problem with GIMP but more and more applications were
crashing. So I had to reinstall. I reinstalled the Tribe Live CD 2 and
there was no problem with the gimp anymore. It could have been an
upgrade pr
So I followed the debuggingProgramCrash howto and installed the
packages you asked for. But if I start the program from the command
line it does not reproduce the crash. However if I start the program
from the menu it crashes at my first given point. The menu command is
gimp-remote-2.3 %U. If I use
Here is the valgrind log with the gimp-dbg and libgtk2.0-0-dbg package
installed.
** Attachment added: "valgrind.log.7454"
http://launchpadlibrarian.net/8272924/valgrind.log.7454
--
gimp crashes after opening new image
https://bugs.launchpad.net/bugs/123318
You received this bug notification
I have gimp-dbg and libgtk2.0-0-dbg. Not the
gtk2-engines-ubuntulooks-dbg. So I wil generate a report without the
ubuntulooks dbg package.
2007/7/1, Peter Hoogkamer <[EMAIL PROTECTED]>:
> Ok, I am starting to find them, but then without the sym part at the end.
>
> 2007/7/1, Peter Hoogkamer <[EMA
Ok, I am starting to find them, but then without the sym part at the
end.
2007/7/1, Peter Hoogkamer <[EMAIL PROTECTED]>:
> Non of these packages are in my repositories!! Where can I get them?
>
> 2007/7/1, Sebastien Bacher <[EMAIL PROTECTED]>:
> > There is no error in this log. Could you try to in
Non of these packages are in my repositories!! Where can I get them?
2007/7/1, Sebastien Bacher <[EMAIL PROTECTED]>:
> There is no error in this log. Could you try to install gimp-dbgsym gtk2
> -engines-ubuntulooks-dbgsym libgtk2.0-0-dbgsym and get a new one?
>
> --
> gimp crashes after opening ne
If I start GIMP with the valgrind options from the
https://wiki.ubuntu.com/Valgrind manual the program does not fail.
However if I start GIMP without valgrind it fails at the point I
mentioned in my bug discription. I have attached the valgrind log.
Peter
** Attachment added: "valgrind.log.7341"
Public bug reported:
Binary package hint: gimp
Operating system:
Ubuntu Gutsy Gibbon updated until 30-06-07
Kernel version:
2.6.22-7-generic
Reproduce (only with GNU Image Manipulation Program version 2.3.18)
1. Start GIMP
2. Choose File -> New
3. Crash
I am in doubt whether the problem is wit
He Ben,
This works. Great! It boots perfectly into gutsy now. Do you have my
dmesg again to see what happens now?
Peter
2007/5/18, Bug Watch Updater <[EMAIL PROTECTED]>:
> ** Changed in: linux (upstream)
>Status: Unknown => Confirmed
>
> --
> MPT drive not detected under VMware WS5
> htt
Ben,
Could you tell me what an mpt driver is? Is it a specific virtual
driver from vmware?
Or something else?
Peter
2007/5/17, Ben Collins <[EMAIL PROTECTED]>:
> ** Summary changed:
>
> - IDE drive not detected under VMware WS5
> + MPT drive not detected under VMware WS5
>
> ** Bug watch added:
Ok, I am quite a newbe in this. I will use the webinterface in the
future.
Peter
2007/5/17, Ben Collins <[EMAIL PROTECTED]>:
> Peter, please, in the future, use the web interface to attach large
> files, else it really makes it hard to read the file, and surrounding
> comments.
>
> I'm going to h
GHi Ben,
With the help of somebody else (Dean Gaudet) I got to extract the
dmesg from my vm. He told me to redirect the output of the console to
a file. Here is my dmesg:
[0.00] Linux version 2.6.22-3-generic ([EMAIL PROTECTED]) (gcc
version 4.1.3 20070429 (prerelease) (Ubuntu 4.1.2-5ubun
Hi Dean,
That the same this with me. But mine stops after finding the pcnet32
card and then drops to initramfs. How do you extract this output? Then
I can send my dmesg output to the developers. They asked for it.
Thanks,
Peter
2007/5/17, dean gaudet <[EMAIL PROTECTED]>:
> i haven't tried your k
HI Ben,
I have been analysing the kmsg and saw some things regarding to scsi.
First of all I saw a
scsi1 1:0:0:0: CD-ROM -> this on is later seen as sr1
after that I see a
scsi2: ioc0 : LSI53C1030 - > Could this be my harddisk??
After this entry neighter of the scsi2 data is seen as an dev entry o
ls -l /dev/sd*
ls: /dev/sd*: No such file or directory
ls -l /dev/hd*
ls: /dev/hd*: No such file or directory
cat /proc/modules | grep ata
ata_piix 15748 0 - Live 0xd0824000
ata_generic 8452 0 - Live 0xd0838000
libata 127132 2 ata_piix,ata_generic, Live 0xd088c000
scsi_mod 147340 6 sg,sr_mod,mptspi
Hi Ben,
The attachements shows the output of the commands you gave me.
I will try to get the cat /proc/kmsg to you.
Do you have any clues? The kernel might not be able to detect the
virtual scsi hd from my vmware. It is not the first time I had
troubles with this when booting with new kernels. But
Ben,
I forgot to mention that I also tryed to boot in recovery mode and got
the same message
ALERT! /dev/disk/by-uuid/[partition-id] does not exist! Dropping to shell
My disk is being detected as a scsi disk at sr0.
Peter
2007/5/15, Peter Hoogkamer <[EMAIL PROTECTED]>:
> Ben,
>
> I have tryed t
Ben,
I have tryed to boot with 2.6.22-3.9 but no luck. Same problem. As far
as my knowledge goes I can't find any strange things in the console
messages before the drop to initramfs. It stalls with the alert that
it can't find my \dev\uuid\[partition code]\ and drops to initramfs.
I will try you'r
Hello Ben,
You are right about the kernel. It boots with 2.6.20-15 correctly. But
I get the error on kernel 2.6.22, even in recovery mode. I will check
you're suggestion with the USB stick later on.
Greetings,
Peter
2007/5/8, Ben Collins <[EMAIL PROTECTED]>:
> Some of this doesn't make sense. I
** Summary changed:
- drop to initramfs with linux-image-2.6.22
+ drop to initramfs with linux-image-2.6.22-1.5
** Description changed:
- Binary package hint: linux-source-2.6.22
+ Binary package hint: linux-source-2.6.22-1.5
When I boot with kernel 2.6.22 (even with recovery mode) it drops
Public bug reported:
Binary package hint: linux-source-2.6.22
When I boot with kernel 2.6.22 (even with recovery mode) it drops to initramfs
with the following error:
check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls /dev
ALERT! /dev/disk/by-uuid/119c2980-84
44 matches
Mail list logo
