I replaced CPU only to find problem still existed.
A BIOS upgrade fixed the problem for me.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/993758
Title:
hardware errors every 300s
To manage notifica
I have 2 disks on the same machine with 13.04.
The one that is a 1T hard drive has no problems.
The one on a 12o GB SSD produces the results listed in previous comment.
This drive has discard added in fstab.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I just upgraded from 12.10 to 13.04.
I now get this error message in dmesg:
[ 3297.587238] [Hardware Error]:MC2_ADDR: 0x0001d31aa180
[ 3297.588899] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 3297.590563] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
--
[ 3297.587238] [Hardware Error]:MC2_ADDR: 0x0001d31aa180
[ 3297.588899] [Hardware Error]: Bus Unit Error: EV error during data copyback.
[ 3297.590563] [Hardware Error]: cache level: L2, tx: GEN, mem-tx: EV
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I just upgraded from 12.10 to 13.04.
I now have the error messages in dmesg described here.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/993758
Title:
hardware errors every 300s
To manage notifica
I switched to the 64 bit beta package -> works well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/762968
Title:
package flashplugin-installer 10.2.159.1ubuntu1 failed to
install/upgrade: subproce
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/829870
Title:
package flashplugin-installer 10.3.183.4ubuntu3 failed to
install/upgrade: subprocess installed post-installation script
returned error
Public bug reported:
doing upgrade
ProblemType: Package
DistroRelease: Ubuntu 11.10
Package: flashplugin-installer 10.3.183.4ubuntu3
ProcVersionSignature: Ubuntu 3.0.0-8.11-generic 3.0.1
Uname: Linux 3.0.0-8-generic x86_64
AptOrdering: flashplugin-installer: Configure
Architecture: amd64
Date: Fr
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/829586
Title:
package flashplugin-installer 10.3.183.4ubuntu3 failed to
install/upgrade: ErrorMessage: subprocess installed post-installation
script
Public bug reported:
Performing partial upgrade
ProblemType: Package
DistroRelease: Ubuntu 11.10
Package: flashplugin-installer 10.3.183.4ubuntu3
ProcVersionSignature: Ubuntu 3.0.0-8.11-generic 3.0.1
Uname: Linux 3.0.0-8-generic x86_64
Architecture: amd64
Date: Fri Aug 19 05:40:27 2011
ErrorMessa
Dmesg between crashes on my AMD64 ubuntu 11.10 machine
[113237.828772] sol[14555]: segfault at 3 ip 7f47fbac92c3 sp
7fff3fcc64c0 error 4 in libunico.so[7f47fbac+b000]
[113413.950075] [Hardware Error]: MC0_STATUS[Over|CE|-|-|AddrV|CECC]:
0xd40040004136
[113413.950089] [Hardware Er
Done.
Problem Solved.
Thank You.
--
update-manager does not reports update time since install
https://bugs.launchpad.net/bugs/656602
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.
Sorry, forgot to add this error message:
Fetched 12.7MB in 49s (257kB/s)
Reading package lists... Done
W: A error occurred during the signature verification. The repository is not
Did sudo apt-get update
system fetched files
Did sudo apt-get upgrade
system reported no upgrades available
Ran update manager --- still at 8 days and annoying menu bar icon.
--
update-manager does not reports update time since install
https://bugs.launchpad.net/bugs/656602
You received this bu
Checked for updates, installed ia32 libs. It now states 8 days
--
update-manager does not reports update time since install
https://bugs.launchpad.net/bugs/656602
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing l
As per the attached screenshot. I have been updating daily. The
package information was last updated would normally say less than one
hour. I am getting time since fresh install. I expect tomorrow it will
say 8 days right after I press "check" and install what ever updates
that are available.
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/656602/+attachment/1678095/+files/Dependencies.txt
--
update-manager does not reports update time since install
https://bugs.launchpad.net/bugs/656602
You received this bug notification because you are a member of Ubuntu
Public bug reported:
Binary package hint: update-manager
I installed a fresh rebuild 7 dates ago.
Update manger even thought updated almost daily reports "The package
information was updated 7 days ago"
i.e. the date when I installed Ubuntu 10.10 from a daily build.
ProblemType: Bug
DistroRelea
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/52240214/Dependencies.txt
--
Scrambled Login Screen
https://bugs.launchpad.net/bugs/608033
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Public bug reported:
Binary package hint: gdm
Linux maverick 2.6.35-9-generic #14-Ubuntu SMP Sun Jul 18 15:59:30 UTC
2010 x86_64 GNU/Linux
Today's update after reboot could not be logged into do to unreadable
gdm screen.
Using alternate boot and low res screen to login.
dmesg
[ 11.379167] fb
If Visual Effects in Appearance Preferences is set to none, blender 2.5
works well with second monitor enabled.
Visual Effects of normal or extra cause blender to garble unless second
monitor is disabled.
--
Unusable Area on main screen in 2 screen setup
https://bugs.launchpad.net/bugs/561982
Y
Using drag and drop via amdcccle to reposition screen works. Operations
moving a gnome-terminal to all areas of both screens was great. Visual
Effects in Appearance Preferences is set to extra.
The blender 2.5 screen was randomly garbled until I disabled second
screen with amdcccle.
The analog
Felix, all your statements are correct. "xrandr --output CRT2 --left-of
DFP4" used after login to get screen on left side. I can not find place
in amdcccle to do this move.
The HD5750 is a PowerColor AX5750 1GBD5-S3DH s/n:PG0911022829.
The main LCD is a Benq m2400hd connected by DVI cable to top
Blender 2.5 with second screen disabled.
Compiz is useless with second screen enabled as well.
** Attachment added: "Blender with second screen disabled"
http://launchpadlibrarian.net/44096684/Screenshot-2.png
--
Unusable Area on main screen in 2 screen setup
https://bugs.launchpad.net/bugs
Blender 2.5 with 2 screen operational
** Attachment added: "Blender with 2 screens"
http://launchpadlibrarian.net/44096588/Screenshot-1.png
--
Unusable Area on main screen in 2 screen setup
https://bugs.launchpad.net/bugs/561982
You received this bug notification because you are a member of
Problem 1.
Catalyst Control Center lists the smaller screen as being on the right side of
the main screen.
The screenshot.png show the second screen on the left side of the main screen.
Problem 2.
The dead spot is the blob in the lower right side of the main screen. As Felix
pointed out it is j
** Attachment added: "Screen shot of problem."
http://launchpadlibrarian.net/43986988/Screenshot.png
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/43986432/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/43986433/CurrentDmesg.txt
Public bug reported:
Catalyst Control Center appears to have now way of putting screen on left side.
Using "xrandr --output CRT2 --left-of DFP4" on my HD5750 creates unusable area
as shown in screen capture.
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: fglrx 2:8.723.1-0ubuntu1
ProcVersi
3
This bug was re-classified as an intel bug from a generic gdm issue.
--
gdm fails to start
https://bugs.launchpad.net/bugs/554023
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.
Since last update to working system was linux-kernel. Reinstalling
fglrx resolved the problem to the previously working system.
I do not have a second system to ssh into one of my fresh installs from
daily build. The installation fails before I enter any of the install
information so files are i
I have an ATI HD5750. My current working system failed the first reboot after
yesterdays update.
The current Xorg.0.log is 0 bytes in size, thus I attached Xorg.0.log.old.
Lucid 10.04 2.6.32.19 appears on grub. I was able to boot using recovery mode.
Update/upgrade to not resolve issue.
As
I have had problems using daily build from March 29, 31, April 1 and 2.
Initial "Ubuntu" screen with 5 dots works fine then blank screen.
I have an ATI HD5750.
Previous daily builds from March 8, 15 and 22 worked.
--
gdm fails to start
https://bugs.launchpad.net/bugs/554023
You received this bu
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/41890122/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/41890123/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/41890124/Dependencies.txt
** A
Public bug reported:
HD5750
Linux Lucid 2.6.32-17-generic #26-Ubuntu SMP Sat Mar 20 02:23:45 UTC 2010
x86_64 GNU/Linux
Second screen is black most of the time.
All functions work on main screen.
ProblemType: Bug
Architecture: amd64
Date: Wed Mar 24 19:06:04 2010
DistroRelease: Ubuntu 10.04
DkmsS
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/39191972/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/39191974/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/39191975/Dependencies.txt
** A
Public bug reported:
Binary package hint: xorg
System is fresh install from lucid amd64 daily build 2010/02/14.
synaptic install error message:
Depends: xserver-xorg-core but is not going to be installed.
Recommends: fglrx-amd-amdcccle but is not going to be installed.
ProblemType: Bug
Architec
Public bug reported:
libwxbase2.8-dev:
Depends: wx2.8-headers (=2.8.10.1-0ubuntu1) but it is not installable
m...@murlin:~$ uname -a
Linux murlin 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009
x86_64 GNU/Linux
** Affects: wxwidgets2.8 (Ubuntu)
Importance: Undecided
apport-collect 421245 was run successfully
--
bzflag triggers a bug in Radeon graphics driver
https://bugs.launchpad.net/bugs/421245
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.co
m...@karmic:~$ glxgears
drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See
dmesg for more info.
m...@karmic:~$ sh b.sh (script to run blender 2.49b)
Compiled with Python version 2.6.2.
Checking for installed Python... got it!
drmRadeonCmdBuffer: -22. Kernel failed to p
Did a rebuild using Alpha5. Installed xorg.conf file with Option "DRI" "off".
Updated to current code.
Success! All works now.
--
gnome-panel and window manager do not start on login
https://bugs.launchpad.net/bugs/424511
You received this bug notification because you are a member of Ubuntu
Bug
I have done a number of rebuilds from scratch and end up with the same results
--- sent back to login screen if GNOME selected. Get limited use with
gnome-panel. gnome-session sends me back to login screen.
compiz also sends me back to the login screen.
I am using an AMD 3800+ with a HD3450 vi
running gnome-session sends me back to gdm for another login.
running gnome-panel in terminal session (i.e. no &) gives me limits
functionality.
** Attachment added: "dump"
http://launchpadlibrarian.net/31331229/dump
--
[karmic] gnome-panel and window manager do not start on login
https://bu
Tested backport.
It solved the problem.
--
clive 1.0.2 no longer works on youtube urls
https://bugs.launchpad.net/bugs/415660
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https
This problem was tested on Jaunty 2.6.28-15-generic #49-Ubuntu SMP Tue
Aug 18 19:25:34 UTC 2009 x86_64 GNU/Linux
--
clive 1.0.2 no longer works on youtube urls
https://bugs.launchpad.net/bugs/415660
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I had the same problem as described in bug 408773 today.
sudo /etc/init.d/apparmor stop
sudo dhclient eth0
fixed the problem.
--
NetworkManager fails to connect at login; needs restart
https://bugs.launchpad.net/bugs/405902
You received this bug notification because you are a member of Ubuntu
B
Haven't tried restarting networkmanager; however: find rebooting system
works.
syslog messages:
Jul 29 19:25:52 karmic NetworkManager: starting...
Jul 29 19:25:52 karmic NetworkManager: (eth0): new Ethernet device
(driver: 'r8169')
Jul 29 19:25:52 karmic NetworkManager: (eth0): exported as
Linux karmic 2.6.31-3-generic #19-Ubuntu SMP Tue Jul 14 16:07:02 UTC
2009 x86_64 GNU/Linux
When I copy a file to a new name, I can edit the copy. When I try to
edit the original, gedit screen comes up and then exits immediately.
--
[karmic] Gedit crashes when saving over sftp
https://bugs.launc
Yes, I have an ati graphics card. This problem was solved by a later daily
build of karmic.
>
> From: Andy Whitcroft
> Date: 2009/07/15 Wed AM 05:46:53 CDT
> To: linde...@mts.net
> Subject: [Bug 394371] Re: boot failure after 2.6.31 kernel upgrade
>
> I note that you have an ATI graphics contr
The new kernel allows disk write; however: this error log results:
Checking session consistency (brasero_burn_check_session_consistency
brasero-burn.c:1932)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_
Public bug reported:
Binary package hint: classpath
I was in the process of installing jikes & jikes-classpath
ProblemType: Package
Architecture: amd64
Date: Sun Jul 12 12:19:55 2009
DistroRelease: Ubuntu 9.10
ErrorMessage: trying to overwrite `/usr/share/man/man1/gappletviewer.1.gz',
which is
** Attachment added: "AptOrdering.txt"
http://launchpadlibrarian.net/28939661/AptOrdering.txt
** Attachment added: "Dmesg.txt"
http://launchpadlibrarian.net/28939662/Dmesg.txt
** Attachment added: "DpkgTerminalLog.txt"
http://launchpadlibrarian.net/28939663/DpkgTerminalLog.txt
--
pack
*** This bug is a duplicate of bug 397906 ***
https://bugs.launchpad.net/bugs/397906
Public bug reported:
When I insert a blank disk in response to brasero disk burner request
"Please insert a recordable CD or DVD.", the request is not responded
to. The desktop image Blank CD-R Disc appears
Using daily build 7-July-2009 to rebuild from scratch solves the problem.
>
> From: mlindeblom
> Date: 2009/07/07 Tue AM 06:27:13 CDT
> To: linde...@mts.net
> Subject: Re: [Bug 394371] Re: boot failure after 2.6.31 kernel upgrade
>
> The next few updates resulted in a to
The next few updates resulted in a totally unusable system. I tried
using the daily build from 3-Jul-09 to rebuild from scratch; however: it
resulted in a blank screen.
I will try the next few daily builds.
I am using an ATI HD3450 graphic card and a AMD 3800+ cpu.
>
> From: Andy Whitcroft
> D
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/28601609/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/28601610/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/28601611/Dependencies.txt
** A
Public bug reported:
Boot hangs at GDM banner after 2.6.31 kernel upgrade.
Using 2.6.30.10 works fine.
ProblemType: Bug
Architecture: amd64
Date: Wed Jul 1 11:11:02 2009
DistroRelease: Ubuntu 9.10
HibernationDevice: RESUME=UUID=16c70311-167c-4253-a795-ae663b08816c
MachineType: Unknow Unknow
Pack
** Attachment added: "GDM log for 2.6.31 boot failure"
http://launchpadlibrarian.net/28601660/%3A0.log.2
--
boot failure after 2.6.31 kernel upgrade
https://bugs.launchpad.net/bugs/394371
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu
Confirmed 2.6.30-8-generic #9-Ubuntu SMP Wed Jun 3 15:38:38 UTC 2009
x86_64 GNU/Linux appears to solve this bug.
--
snd_pcm_delay() returned a value that is exceptionally large:
https://bugs.launchpad.net/bugs/374010
You received this bug notification because you are a member of Ubuntu
Bugs, whic
I am running 2.6.30-7-generic #8-Ubuntu SMP Mon May 25 13:52:54 UTC 2009
x86_64 GNU/Linux
After rebooting, I unmute and adjust the volume level to max and still
get no audio.
Issung "pkill pulseaudio; sleep 2; pulseaudio" give me a working audio
for mplayer, vlc and rhythmbox.
Alsa output applic
Public bug reported:
The specific partitioner choice "use entire disk with LVM" does not
allow partitions to be modified.
Use entire disk without LVM works fine.
** Affects: partitioner (Ubuntu)
Importance: Undecided
Status: New
--
partitioner choice does not allow EXT4 partition
Public bug reported:
Binary package hint: putty
putty:
Depends: libgtk1.2 (>=1.2.10-4) but it is not installable
~$ lsb_release -rd
Description:Ubuntu karmic (development branch)
Release:9.10
~$ apt-cache policy putty
putty:
Installed: (none)
Candidate: 0.60-4
Version table:
It took about 3 update cycles to finally clear all updates.
After that I was able to use synaptic installer virt-manger without errors.
Please close bug.
>
> From: Andreas Olsson
> Date: 2009/02/18 Wed AM 09:06:05 CST
> To: linde...@mts.net
> Subject: [Bug 330828] Re: virt-manager: Depends: pytho
Yes, I had the most recent update. I ran update again and I not get bug 330983.
>
> From: Andreas Olsson
> Date: 2009/02/18 Wed AM 09:06:05 CST
> To: linde...@mts.net
> Subject: [Bug 330828] Re: virt-manager: Depends: python-virtinst (>=0.400.1)
> but 0.400.0-6ubuntu1 is to be installed
>
Public bug reported:
Have python-virtinst 0.400.0 is latest version in snaptic installer
Jaunty Alpha 4
** Affects: virt-manager (Ubuntu)
Importance: Undecided
Status: New
--
virt-manager: Depends: python-virtinst (>=0.400.1) but 0.400.0-6ubuntu1 is to
be installed
https://bugs
Just did fresh install using Jaunty Alpha 4 using ext4.
It tried to use 1152x864 on my 1024x768 screen. I went back to live cd mode
and reduced resolution. Every thing went fine from there. First boot was in
1152x864 using radeon. Edited xorg.conf to get virtual size up for second
screen.
m
Using days update of Jaunty Alpha 3, I commented out Driver, BusID & Option HPD
"off from /etc/X11/xorg.conf, then rebooted.
Radeon driver loaded and 2nd monitor not seen
m...@ubuntu2:~$ xrandr
Screen 0: minimum 320 x 200, current 1152 x 864, maximum 2704 x 1050
VGA-0 connected 1152x864+0+0 (norm
X from
> starting / black screen
>
> mlindeblom:
> Thanks for the testing. So radeonhd works with two cards (And the card, which
should be used set manually by pci id).
> I saw in your xorg.conf, that you used the option "HPD" "off". Is this
necessary?
> mlindeblom:
> Could you install the radeonhd driver and try to use that one? Does this
> work, too?
> Thanks!
>
m...@ubuntu2:~$ uname -a
Linux ubuntu2 2.6.28-4-generic #11-Ubuntu SMP Fri Jan 16 21:50:52 UTC 2009
x86_64 GNU/Linux
m...@ubuntu2:~$ xrandr --output DVI-I_2/an
I just installed a fresh copy of Jaunty Alpha 3 using ext4.
All install attempts stopped with "PANIC:early exception ... " until I
removed the HD3450.
After getting the system built from scratch without the HD3450, I re-
installed the HD3450 and my previous xorg.conf.
System works OK as before.
alsa-info results
http://www.alsa-project.org/db/?f=8516b4f44cc6dc93323d72a0479efdb92e1ee602
--
Only one hda-intel sound card configured
https://bugs.launchpad.net/bugs/316083
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
** Attachment added: "dmesg"
http://launchpadlibrarian.net/21102966/dmesg
--
Only one hda-intel sound card configured
https://bugs.launchpad.net/bugs/316083
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Motherboard integrated ATI Technologies Inc SBx00 Azalia (Intel HDA)
[1002:4383] sound is not configured.
m...@ubuntu2:~$ aplay -l
List of PLAYBACK Hardware Devices
card 0: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevic
After changing Option "HPD" from "off" to "swap" in xorg.conf and
switching to the radeon driver has solved the problem.
Pls change status to solved.
m...@ubuntu2:~$ xrandr -q
Screen 0: minimum 320 x 200, current 2304 x 1024, maximum 2704 x 1050
VGA-0 connected 1024x768+0+0 (normal left inverted
I have success with the current radeon driver in jaunty alpha 2 provided
I manually add BusID and the HPD option to xorg.conf. I am currently
using 4GB memory.
m...@ubuntu2:~$ xrandr -q
Screen 0: minimum 320 x 200, current 2304 x 1024, maximum 2704 x 1050
VGA-0 connected 1024x768+0+0 (normal lef
*** This bug is a duplicate of bug 311748 ***
https://bugs.launchpad.net/bugs/311748
Have switched from radeonhd to today's radeon and put memory back to 4GB.
Single screen works fine.
xrandr does not see alternate outputs. There is also a warning that
R600 code is experimental. The HD3450
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/20933044/Xorg.0.log
--
Two outputs are changed with --output
https://bugs.launchpad.net/bugs/314231
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs maili
Public bug reported:
When I set the output to modes listed it may not work or set two outputs
instead of one.
radeonhd 1.24, jaunty alpha2 updated, Sapphire PI-AM2RS690MHD, 2GB, HD3450
m...@ubuntu2:~$ xrandr -q
Screen 0: minimum 320 x 200, current 2048 x 768, maximum 2704 x 1050
VGA_1 connected
*** This bug is a duplicate of bug 311748 ***
https://bugs.launchpad.net/bugs/311748
By specifying BusID I am able to turn 780G back on. Will test on my 690G
motherboard soon. Still working on dual monitor setup.
>
> From: goto
> Date: 2009/01/01 Thu PM 02:52:28 CST
> To: linde...@mts.net
*** This bug is a duplicate of bug 311748 ***
https://bugs.launchpad.net/bugs/311748
>What happens if you try to use the driver "radeonhd"
I have two similar systems. On the one with the integrated RS690 that I
can not disable --- fails with radeonhd.
On the one with a RS780G which I can di
> 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon
X1200 Series] [1002:791e]
> 02:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility
Radeon HD 3450 [1002:95c5]
> Seems you have two graphic cards, maybe that confuses the driver?
Testing I did with th
The Xorg.conf was indentical to one attached above.
This was done with original alpha2 install.
** Attachment added: "Original Xorg.0.log"
http://launchpadlibrarian.net/20845810/Xorg.0.log.old
--
HD3450 configuration fails on reboot in jaunty
https://bugs.launchpad.net/bugs/312924
You receive
** Attachment added: "lspci -vvnn results"
http://launchpadlibrarian.net/20845058/lspci-vvnn
--
HD3450 configuration fails on reboot in jaunty
https://bugs.launchpad.net/bugs/312924
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: "resent Xorg.0.log"
http://launchpadlibrarian.net/20845040/Xorg.0.log
--
HD3450 configuration fails on reboot in jaunty
https://bugs.launchpad.net/bugs/312924
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
u
** Attachment added: "Auto config xorg.conf"
http://launchpadlibrarian.net/20845023/xorg.conf.0
--
HD3450 configuration fails on reboot in jaunty
https://bugs.launchpad.net/bugs/312924
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Binary package hint: xserver-xorg
Installed onto fresh formatted disk using jaunty alpha 2.
Updated install with sudo apt-get update.
The only successful boot I can get is by manually adding driver "vesa" to
device section in /etc/X11/xorg.conf
** Affects: xorg (Ubuntu)
I have not experienced this bug sine about two days after I reported it. I
assume one of the numerous upgrades fixed this problem.
Thanks looking into this bug - Murray
>
> From: Marlon Cisternas Milla <[EMAIL PROTECTED]>
> Date: 2008/11/01 Sat AM 11:39:49 CDT
> To: [EMAIL PROTECTED]
> Subject:
** Attachment added: "apt.log"
http://launchpadlibrarian.net/18352409/apt.log
--
upgrade hangs after ldconfig deferred processing
https://bugs.launchpad.net/bugs/280478
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Public bug reported:
Ubuntu 8.10 beta
AMD64 5000+ R790 (HD3200) 1 GB ram
Update manager states Partial Upgrade available
Distrubtion Upgrade runs until cleanup stage
Partial upgrade hangs after ldconfig deferred processing
Shutdown machine.
Restart.
Again Update manager states Partial Upgrade a
Public bug reported:
Ubuntu 8.10 beta
Compaq NC8430
60.0GB ATA Fujitsu MHW2060B
Intel T2400 1.83GHz 1.0GB ram
Partitioner tries to use entire disk in guided or manual mode.
The disk has Ubuntu 7.10 and Windows XP.
Installation canceled at this point.
** Affects: partitioner (Ubuntu)
Import
89 matches
Mail list logo
