After testing again i must confirm that is not fixed. As i wrote my
comment to close this bug i did not saw that the wlan module were not
loaded. If the modules were not loaded the led will not blink but if
they were loaded the led is blinking.
** Changed in: linux (Ubuntu)
Status: Fix Rele
With the last kernel update on ubuntu jaunty a few days ago the
wlan/bluetooth led is not blinking anymore when i switch off wlan. It is
disabled as it should. I have now kernel 2.6.28-13-generic installed.
--
wlan led changes between on and blinking when wlan is disabled
https://bugs.launchpad.n
The site you gave us does not exist.
Could you close this bug, please.
--
usb device Creative Nomad_Muvo not mountable
https://bugs.launchpad.net/bugs/240211
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
u
** Attachment added: "streamripper.trace"
http://launchpadlibrarian.net/26808246/streamripper.trace
--
streamripper hangs and consumes 100 % cpu
https://bugs.launchpad.net/bugs/377228
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
Public bug reported:
Binary package hint: streamripper
i am running streamripper_x64 on a amd athlon 64 X2 Dual Core on ubuntu
jaunty.
The program ripps some tracks and than after a while it hangs and
consumes 100 % on one core.
i have added the stacktrace from strace.
** Affects: streamripper
With kernel 2.6.28-11 it is always an issue.
** Changed in: linux-restricted-modules-2.6.20 (Ubuntu)
Status: Incomplete => New
--
wlan led changes between on and blinking when wlan is disabled
https://bugs.launchpad.net/bugs/102757
You received this bug notification because you are a memb
With the kernel from jaunty (2.6.28-11 i think) it works. In the output
from dmesg are a lot of I/O error messages printed out but the device
could be mounted and is read and writable.
--
usb device Creative Nomad_Muvo not mountable
https://bugs.launchpad.net/bugs/240211
You received this bug not
i have the same behavior with a:
"01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
Radeon 9600 M10]"
and the radeon driver enabled.
--
MythTV Frontend does not work with RADEON DRI
https://bugs.launchpad.net/bugs/341898
You received this bug notification because you are a
Yes, it is always an issue. Sometimes if i disable WLAN it need some
tries to disable it. I am using Ubuntu Intreid now with Kernel
2.6.27-11-generic.
--
wlan led changes between on and blinking when wlan is disabled
https://bugs.launchpad.net/bugs/102757
You received this bug notification becaus
what is going on here. Why no one will fix this bug ?
I have researched a little bit and found out, that the problem is the
second battery. If i remove it, cpufreqd will not crash anymore.
** Attachment added: "cpufreqd -D -V 7 output"
http://launchpadlibrarian.net/21331472/cpufreqd.log
--
i have the same problem since intrepid kernel.
/var/log/syslog:
Nov 30 10:33:14 ib-laptop cpufreqd: get_class_device_attribute: couldn't open
/sys/devices/LNXSYSTM:00/device:00/PNP0C0A:01/power_supply/C136/energy_full (No
such file or directory)
Nov 30 10:33:14 ib-laptop cpufreqd: get_class_dev
The error seems to be the same as with the 2.6.24 kernel. i have
attached the dmesg output.
** Attachment added: "dmesg output"
http://launchpadlibrarian.net/17189154/dmesg.log
--
usb device Creative Nomad_Muvo not mountable
https://bugs.launchpad.net/bugs/240211
You received this bug notific
Public bug reported:
i can not mount my usb mp3 player from creative. I habe tried it with
the amd64 and the i386 version of ubuntu. I can mount it with knoppix
live cd with linux kernel 2.6.19.x.
Here the dmesg log:
[ 6732.354342] usb 1-3: new full speed USB device using ohci_hcd and address 4
Public bug reported:
Binary package hint: kolab-webadmin
environment: Ubuntu hardy i386
package: kolab-webadmin (2.1.0-20070510-2)
after installation there is only a blank page shown.
There is an error in the file /usr/share/kolab-
webadmin/admin/include/mysmarty.php the class 'Smarty.class.php
Public bug reported:
Binary package hint: ubuntu-minimal
The package ubuntu-minimal has a dependeny to package console-tools so i
cannot install the package kbd which provides the same meta-packages
(console-utilities and open).
** Affects: ubuntu-meta (Ubuntu)
Importance: Undecided
yes this error was fixed in Gutsy Gibbin 7.10 and it also works in Hardy
Heron 8.04. so this bug can be closed.
--
Hidden chipset on HP Compaq nc8000
https://bugs.launchpad.net/bugs/77635
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
I have tried to reproduce the error but i got another error with german
umlauts. It seems to not be possible to copy the output of the log
screen to the clipboard but i found the log file (html?). On the
standard output the following message where shown:
QImage::smoothScale: Image is a null image
Today i got the same problem with the auto generated xorg.conf. But i
have not changed it manualy to 'vesa'.
I can start the machine several times without a problem. but somtimes i
get this error. There can be some days between.
--
X sometimes will not start: xf86EnableIOPorts fails
https://bugs
dpkg-reconfigure did not ask for a driver. it has set the ati driver in
the new generated xorg.conf. should i change that manualy?
--
X sometimes will not start: xf86EnableIOPorts fails
https://bugs.launchpad.net/bugs/160068
You received this bug notification because you are a member of Ubuntu
Bu
Now X not started without a xorg.conf. I have added the Xorg.0.log.
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/10546526/Xorg.0.log
--
X sometimes will not start: xf86EnableIOPorts fails
https://bugs.launchpad.net/bugs/160068
You received this bug notification because you
Public bug reported:
Binary package hint: xorg
Often X will not start on a cold start. If then restart kdm it will start. I am
using a HP Laptop nc8000.
Here the output of lspci:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev
03)
00:01.0 PCI bridge: Intel Corpo
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/10270994/Xorg.0.log
--
X sometimes will not start
https://bugs.launchpad.net/bugs/160068
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing li
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/10270969/xorg.conf
--
X sometimes will not start
https://bugs.launchpad.net/bugs/160068
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Binary package hint: kmediafactory
i habe just added one video file and selected for example the simple
template. After that i wanted to create a K3B Project and pressed
'start'. The error message above was shown and no output generated.
I found no way to copy the log file t
I think it is fixed in feisty i have installed it without tetex.
--
Dependency to tetex
https://bugs.launchpad.net/bugs/118702
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.co
i habe installed vmware-server today and it removed xinetd, too. so
there is a bad dependency i think.
--
vmware-server installs netkit-inetd and removes xinetd
https://bugs.launchpad.net/bugs/112799
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug cont
Here the printout of the commands:
uname -a
Linux ib-laptop 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686
GNU/Linux
lsb_release -d
Description:Ubuntu 7.04
dpkg -l kile
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Säubern/Halten
| Sta
Public bug reported:
Binary package hint: kile
this package has a dependency to tetex and could not be installed with
texlive.
** Affects: kile (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
Dependency to tetex
https://bugs.launchpad.net/bugs/118702
You received this bug n
NOT crashing xorg.conf
--
Powermanager crashes
https://bugs.launchpad.net/bugs/92550
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kde-guidance in ubuntu.
--
kubuntu-bugs mailing list
[EMAIL PROTECTED]
https://lists.ubuntu.com/mailman/li
NOT crashing xorg.conf
** Attachment added: "not_crashing xorg.conf"
http://librarian.launchpad.net/7326076/xorg.conf.sh
--
Powermanager crashes
https://bugs.launchpad.net/bugs/92550
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kde-gu
i found out that the powermangager only crashes when i use my xorg.conf
eith multihead enabled. i will add the xorg.conf with which the
powermangager will not crash and the one when it craches.
** Attachment added: "crashing xorg.conf"
http://librarian.launchpad.net/7325988/xorg.conf.dh
--
Po
Yes, i have installed all patches but nothing has changed.
--
Powermanager crashes
https://bugs.launchpad.net/bugs/92550
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kde-guidance in ubuntu.
--
kubuntu-bugs mailing list
kubuntu-bugs@list
Public bug reported:
hardware: hp compaq nc8000
lspci:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev
03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev
03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/IC
i always get the following message on the console:
KCrash: Application 'guidance-power-manager.py' crashing...
yesterday i pllayed arroung with the xorg.conf, cause i had some
problems with kde, the powermanger worked. so i thought that there is a
correlation.
--
Powermanager crashes
https://bu
after adding the patch the powermanager crashes.
here some hopefully infomus sections of my xorg.conf:
Section "Module"
Load"i2c"
Load"bitmap"
Load"ddc"
Load"extmod"
Load"freetype"
Load"int10"
Load"type1"
on my laptop hp compaq nc8000 the program /usr/share/python-support/kde-
guidance/guidance-power-manager.py crashes, too. i add the output from
strace.
** Attachment added: "strace output"
http://librarian.launchpad.net/7120173/power.trace
--
Powermanager crashes
https://bugs.launchpad.net/bu
i have checked the source code and saw that the patsch is applied in quirks.c.
But the sensors do not find the smbus chip.
So this bug should be moved to another package ?
--
Hidden chipset on HP Compaq nc8000
https://launchpad.net/bugs/77635
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubun
Public bug reported:
Binary package hint: linux-source-2.6.17
I found this problem when i tried to use sensors within cpufreqd. If i
start sensors manualy the following message is shown:
Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounte
i have load all updated today and tested if the error has gone, but i
got the errot above to:
5:2006/10/23 18-10-20:aqbanking(11967):banking.c: 1818: Configuration file
"/home/ibruell/.banking/settings.conf" does not exist, will create it later.
3:2006/10/23 18-10-20:gwen(11967):
attached strace output
** Attachment added: "strace output"
http://librarian.launchpad.net/4930342/strace.log
--
qbankmanager: Segfault during start-up
https://launchpad.net/bugs/65206
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-
Public bug reported:
Binary package hint: latex-xcolor
i wonder why this package is overaged and the example will not compile cause
'averagebackgroundcolor' is unknown.
After updating the xcolor resources (not using the packe system) it worked.
The not compiling example you can find in usr/shar
41 matches
Mail list logo
