Customer posted their debug output:
We get an error during:
root@plxtil03:~# /etc/init.d/loadcpufreq start
* Loading cpufreq kernel modules...
[fail]
Here’s debug output when starting loadcpufreq:
AT&T customer posted their debug output:
We get an error during:
root@plxtil03:~# /etc/init.d/loadcpufreq start
* Loading cpufreq kernel modules...
[fail]
Here’s debug output when starting loadcpuf
Public bug reported:
Install 14.04.5 hwe-t on a node using maas, then install cpufreqd and
cpufrequtils.
Then run sudo /etc/init.d/loadcpufreq start .
Fails to start. This happens on an AT&T system, I will post his output
shortly.
I get a similar failure on my system .
ProblemType: Bug
D
Tim, good news, the upgraded machine returns the right number:
ubuntu@good-hawk:~$ cat /proc/cpuinfo | grep 'processor' | wc -l
272
ubuntu@good-hawk:~$ Intel(R) Xeon(R) CPU E3-1225 v5 @ 3.30GHz
Intel(R) Xeon(R) CPU E3-1225 v5 @ 3.30GHz
--
You received this bug notification because you are a mem
** Attachment added: "submission_2017-02-01T15.41.41.527613.tar.xz"
https://bugs.launchpad.net/ubuntu/+source/plainbox-provider-checkbox/+bug/1640547/+attachment/4811956/+files/submission_2017-02-01T15.41.41.527613.tar.xz
--
You received this bug notification because you are a member of Ubunt
Got some different errors this time, attaching the test output.
ubuntu@ubuntu-DSS1500:~/good-hawk$ cat stress-ng.txt
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
Hi Tim,
I have the C6320P back and running. Do you hae a new 4.9 kernel to try, or
should I apply the same one above?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1643087
Title:
Yakkety failures
Bjorn Helgaas, have you looked at the ACPI dump? Any suggestions on
how to proceed?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1571798
Title:
Broadwell ECRC Support missing in Ubuntu
To manage
Hi Tim, I'm sure I loaded the right kernel.
Unfortunately I've lost access to the machine, when I can find another I will
update this bug.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1643087
Titl
Public bug reported:
1. Setup system w/ NVMe full install
2. Boot from PXE and install Ubuntu 16.04
3. Check the NVMe detected at partition disk selection list.
4. Not all the NVMe can be detected , and system cannot finished the
installation.
5. Pls refer to attachment only 3x NVMe detected.(800
** Attachment added: "Ubuntu_idle.jpg"
https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1650032/+attachment/4791767/+files/Ubuntu_idle.jpg
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bu
Public bug reported:
Steps to reproduce the problem
==
1. Install Ubuntu 16.04 on the toshiba device (M.2 pcie-ssd).
2. Boot to Ubuntu 16.04 and used command :dmesg (have Call trace)
3. And system will showed NMI watchdog and be hang up soon.
The system config:
Toshiba
** Attachment added: "Ubuntu_idle2.jpg"
https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1650032/+attachment/4791769/+files/Ubuntu_idle2.jpg
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/
** Attachment added: "F2_1_Ubuntu_scheduling.jpg"
https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1650032/+attachment/4791768/+files/F2_1_Ubuntu_scheduling.jpg
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https:/
Public bug reported:
[189212-S5B]System cannot install Ubuntu 16.04 on this cfg#F2_1 , will hang up
soon at partition disk selection list. Steps to reproduce the problem
1. Setup system w/ NVMe full install
2. Boot from PXE and install Ubuntu 16.04 on P3700 pcie-ssd
3. Idle for a while when insta
** Project changed: magnum => linux (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1648388
Title:
Install Ubuntu16.04 in RAID1 created by Intel RSTe and the system
hangs while rebooting
T
Mike, will this fix the stress-related errors I'm seeing in Xeon Phi on
Dell C6320p?
https://certification.canonical.com/hardware/201611-25216/
Thanks,
Mark Wenning
Technical Partner Manager, Cloud Alliances
Canonical, Ltd
mark.wenn...@canonical.com
-
"We will encourage you to develop the thr
Tim, it came up OK with the new kernel, no segfaults that I see. cat
/proc/cpuinfo | grep 'cpu id' | wc -l returns 256 .
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1643087
Title:
Yakkety failure
Ok Tim, looks like it's back up. What do you want to see?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1643087
Title:
Yakkety failures on Xeon Phi (Dell Poweredge C6320p)
To manage notifications
Ok Tim, tryng it now.
How is this different than the one Joe set up in the bug?
Mark Wenning
Technical Partner Manager, Cloud Alliances
Canonical, Ltd
mark.wenn...@canonical.com
-
"We will encourage you to develop the three great virtues of a programmer:
laziness, impatience, and hubris." -- L
Public bug reported:
The display will keep black screen after install 16.04.x via PXE(need use
"Ctrl+Alt+F1" to change to terminal 1, then can see text mode screen)
Quanta team is installing Xenial desktop using PXE boot. After the
installation, the console will show a black screen. Hitting
Sure Tim, let me know when it's done building and a link to get to it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1643087
Title:
Yakkety failures on Xeon Phi (Dell Poweredge C6320p)
To manage no
Tried with Joe's kernel above:
ubuntu@brief-badger:~$ uname -a
Linux brief-badger 4.9.0-040900rc6-generic #201611201731 SMP Sun Nov 20
22:33:21 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
** Attachment added: "c6320p_info_kernel_4.9-rc6.tgz"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/16
Xiong, the BIOS level on the machine is 1.0.0 . Where would I get the
latest BIOS?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1643087
Title:
Yakkety failures on Xeon Phi (Dell Poweredge C6320p)
Joseph,
This is a pretty new machine, as far as I know it's been tested with Xenial and
Yakkety.
I will try to run the test kernel next week when I get back.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.ne
Got the following when I tried to run apport-collect:
ubuntu@brief-badger:~$ apport-collect 1643087
The authorization page:
(https://launchpad.net/+authorize-token?oauth_token=0h42c3flxcPFlcTk6RqB&allow_permission=DESKTOP_INTEGRATION)
should be opening in your browser. Use your browser to authori
** Attachment added: "lspci-vnvn.log"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1643087/+attachment/4779652/+files/lspci-vnvn.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1643087
T
Tar file with all the logs:
C6320p_info:
total 892
drwxrwxr-x 2 mwenning mwenning 4096 Nov 18 17:09 ./
drwxr-xr-x 102 mwenning mwenning 12288 Nov 18 17:24 ../
-rw-r--r-- 1 mwenning mwenning 5321 Nov 18 17:09 alternatives.log
-rw-r- 1 mwenning mwenning490 Nov 18 17:09 apport.log
-
Public bug reported:
Dell Poweredge C6320p machine with Intel Xeon Phi processor, running
certification tests.
I see 2 segfaults in the logs, there are more errors in the cert tests which I
will post later.
Linux brief-badger 4.8.0-27-generic #29-Ubuntu SMP Thu Oct 20 21:03:13
UTC 2016 x86_64
This is a similar issue to
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1491654
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1638753
Title:
185175_[F06G]System dmesg and messages will occur
** Attachment added: "sosreport.7z"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1638753/+attachment/4771466/+files/sosreport.7z
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1638753
Title
Public bug reported:
Steps to reproduce the problem
==
1. Plug-in PCIe card OCE14102-UM.
2. Install Ubuntu14.04.2 UEFI mode by PXE.
3. After OS installation finished, use WhiteList tool to check if there has
error messages or not.
Please help clarify below error messa
This bug can be marked as resolved.
From: "Panicker, Manojkumar"
To: Bug 1606940 <1606...@bugs.launchpad.net>
Cc:
Date: Mon, 17 Oct 2016 04:50:08 +
Subject: RE: [Bug 1606940] Re: A a single PCI read or write appears twice on
the PCIe bus. This happens when using the SR-IOV feature with some
Public bug reported:
Systems: multiple, example below is on Ubuntu Wily. This also happens on
Xenial.
$ lsb_release -rd
Description:Ubuntu 15.10
Release:15.10
$
Trusty uses lshw B.02.16 and does not see this bug.
lshw facility does not report all the system information in the cur
Fantastic, thanks John.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1571798
Title:
Broadwell ECRC Support missing in Ubuntu
To manage notifications about this bug go to:
https://bugs.launchpad.ne
Thanks John,
Can you test some earlier versions of Ubuntu 14.04 and see if you have
the same problem?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1571798
Title:
Broadwell ECRC Support missing in
Public bug reported:
Here is the problem statement from the Dell team:
When booting into Ubuntu 14.04.4 with a Broadwell CPU and an Intel Quick
Assist Card, the memory location that corresponds to ECRC is set to
0x01e0, when the BIOS is setting this location 0x00a0 pre-OS boot. This
causes the c
Public bug reported:
lshw reports "Bus Error" or nothing when run on an arm7 machine
ISEE IGEPv2 board:
OMAP 3520 (ARM Cortex A-8)
SDRAM 512 MB
Flash 512 MB
Ubuntu 12.05.5 LTS
-
( log in)
Welcome to Ubuntu 12.04.5 LTS (GNU/Linux 2.6.37 armv7l)
* Documentation: https://help.ubuntu.com/
Considered fixed, marking invalid.
** Changed in: linux (Ubuntu)
Status: Confirmed => Invalid
** Changed in: linux (Ubuntu Wily)
Status: Confirmed => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.
Marked Invalid, Josh will submit in a set of different bug(s)
** Changed in: linux (Ubuntu)
Status: Triaged => Invalid
** Changed in: linux (Ubuntu Vivid)
Status: Triaged => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
>From tpp-hyperv buglist, Microsoft states:
We've also verified on Hyper-V both Trusty and Utopic and the behavior is as
expected.
Can be removed from the tpp list
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpa
** Description changed:
+ Libvirt now has native support for pluging vNICs into the midonet
+ overlay.
- Libvirt now has native support for pluging vNICs into the midonet overlay.
+ The change in libvirt would make Ubuntu Openstack with MidoNet use a
+ supported interface mode of libvirt instea
#2 , that is correct, I opened the bug in the wrong category.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1434247
Title:
[FFE] Upstream patches to Libvirt for vivid
To manage notifications about
Public bug reported:
Several enterprise customers have had problems bootstrapping juju,
getting errors like:
Download failed. wait 15s\nAttempt 5 to download tools from
https://streams.canonic al.com/juju/tools/releases/juju-1.21.3-trusty-
amd64.tgz...\ncurl: (6) Could not resolve host: strea
Public bug reported:
Libvirt now has native support for pluging vNICs into the midonet overlay.
Proposing that these upstream patches go into Vivid release.
Patches to ibvirt:
http://libvirt.org/git/?p=libvirt.git;a=commit;h=e1f64856941630c0e4944c43384aa3ddbe9db810
http://libvirt.org/git/?p=lib
** Changed in: ubuntu
Status: Confirmed => Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1177148
Title:
DVD medium locked and not released by Ubuntu on Windows server 2012
and
Verified in Dell RR5 HyperV cluster lab using trusty-proposed and
utopic-proposed.
** Tags removed: verification-needed-trusty verification-needed-utopic
** Tags added: verification-done-trusty verification-done-utopic
--
You received this bug notification because you are a member of Ubuntu
Bugs
These are requested patches from the Microsoft Hyper-v team, I don't
think apport will do much.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1423343
Title:
[Hyper-V][ubuntu 15.04] various upstream
** Changed in: linux (Ubuntu)
Status: Incomplete => Opinion
** Changed in: linux (Ubuntu)
Status: Opinion => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1423343
Title:
[Hy
Public bug reported:
Following patches are missing from ubuntu vivid 15.04 compared to latest
upstream (linux-next) , please include them in ubuntu vivid , all the
patches listed here are already upstream .
/arch/x86/include/uapi/asm/hyperv.h
1.
http://git.kernel.org/cgit/linux/kernel/git/next/
Verified on several VPro machines in the Dell lab, with different AMT
firmware levels.
## PowerEdge T20 FW 9.0.21-build 1462works
## Laptop: E6400 FW 4.2.60-build 1060works
## Laptop: E6520 FW 7.1.4-build 1068works
## Laptop: E6430
Tested and verified on PowerEdge R620 with trusty-proposed.
After updating and dist-upgrade, /dev/ipmi0 shows up as a device.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1404509
Title:
[precise,
** Also affects: grub2 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1363719
Title:
efibootmgr may create a duplicated boot entry, "breaking" UEF
Mike Schroeder and I verified that the script attached by Andy in #2
fixes the problem. Thanks Andy.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1413020
Title:
[Hyper-V] IP injection adds the li
IP Injecting testing was successful using the released Ubuntu 14.10 x64 .iso.
The remaining issue is the stanza issue pointed out in Abhishek’s response #13.
I will open a new bug to deal with this.
** Changed in: linux (Ubuntu)
Status: In Progress => Fix Released
** Changed in: linu
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1413020 has been
opened to deal with the "stanza" problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1360580
Title:
[Hyper-V] IP injection do
Public bug reported:
This is new bug branched off Bug
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1360580
The IP injection problem has been fixed, but a small problem remains:
There is one small glitch in how hv_set_ifconfig runs, as after several runs it
keeps adding the line “# The
Fix for this needs to be decided by the kexec-tools team, moving over
there.
** Package changed: linux (Ubuntu) => kexec-tools (Ubuntu)
** Changed in: kexec-tools (Ubuntu)
Assignee: Andy Whitcroft (apw) => (unassigned)
** Changed in: kexec-tools (Ubuntu Utopic)
Assignee: Andy Whitcroft
Bug is stale, marked invalid at Microsoft's request
** Changed in: linux (Ubuntu)
Status: Confirmed => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1301019
Title:
hyper-v: ifdown co
Stale bug, closed out at Microsoft's request.
** Changed in: linux (Ubuntu)
Status: Confirmed => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1311070
Title:
hyper-v:IP Injection on
The fix in #1376494 seems to work for me:
sudo apt-get install ibus-gtk
log out/in
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1379926
Title:
gedit crashed with signal 5 in _XReply()
To manage
Doesn't apply anymore, marking invalid
** Changed in: compiz (Ubuntu)
Status: Confirmed => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1285977
Title:
Ubuntu 14.04 daily build crash
I'm seeing the same error on my hardware MAAS cluster with the latest
maas stable and juju stable . Failing bridge on the bootstrap node is
called "juju-br0". I will post more info on Monday.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Verified that the fix works on Dell PowerEdge R805 .
maas 1.7.0+bzr3299-0ubuntu1~trusty
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1321885
Title:
IPMI detection and automatic setting fail in ubu
** Changed in: dell-poweredge
Assignee: Kent Baxley (kentb) => Mark W Wenning (mwenning)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1216059
Title:
Firefox difficulties with https and I
I tried it here on a C6220 in the Dell lab and found the same thing.
The tar'ed var/log dir is attached.
Notes:
## BIOS boot, not UEFI
## ubuntu-14.04.1-server-amd64.iso -> usb disk
## Add a second disk to array, hit ctl-I on way up and set up RAID1 array
## - exit, status of RAID1 dis
** Changed in: dell-poweredge
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1349920
Title:
ledmon does not work in Ubuntu 14.04
To manage notifications
Abishek, can you give more information on how to duplicate this problem?
What I did was:
Installed ubuntu-14.04.1-server-amd64.iso as a VM under Hyper-V (Windows Server
2008R2SP1)
Installed linux-cloud-tools-3.13.0-32-generic
hv_set_ifconfig seems to work OK.
/run/network/ifstate seems to con
Verified on Dell Poweredge R820 .
** Tags removed: verification-needed
** Tags added: verification-done
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1349920
Title:
ledmon does not work in Ubuntu 1
Don't bother.. Ubuntu's primary desktop teams current focus apparently
does not include users smarter than a catfish. If you have an IQ of
higher than 5, this desktop is not designed for you. (It's not just
Ubuntu at fault here, Gnome team has had a role in this dumbing down
behaviour too, even pr
I well and truly understand..
But please take it as deserved chastisement from the community, that not
explaining this was the wrong course of action..
Major things like this should ALWAYS be explained clearly before hand.
It's highly unprofessional and disrespectful to do otherwise..
Ie, Ubuntu
In fact it would be best to tag the Unity ones the same way, so the
community can see how disasterously inflexible Ubuntu leadership has
become.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/789339
Ti
The bug was related to "documentation or advertising explaining to users
that they have the choice to remain with the Classic desktop"
Tagging Invalid implies there was no problem in the first place..
Tagging "Wont Fix" would have been more appropriate, as it's more honest
and doesn't cover over
What's needed to improve this patch?
I would like to see this bug fixed. It's holding up part of my work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/785479
Title:
gtkcalendar emitting incorrect
** Changed in: unity
Status: Opinion => Confirmed
** Changed in: unity (Ubuntu)
Status: Opinion => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/789339
Title:
No document or
** Patch removed: "gtkcalendar.patch"
https://bugs.launchpad.net/ubuntu/+source/gtk+2.0/+bug/785479/+attachment/2135914/+files/gtkcalendar.patch
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/785479
This one works correctly.
Also stops the assert errors when moving between months via surrounding
days.
** Patch added: "gtkcalendar_select_day_signal.patch"
https://bugs.launchpad.net/ubuntu/+source/gtk+2.0/+bug/785479/+attachment/2136082/+files/gtkcalendar_select_day_signal.patch
--
You r
Gah.. please Ignore that patch.. it needs work..
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/785479
Title:
gtkcalendar emitting incorrect day_selected signal
--
ubuntu-bugs mailing list
ubuntu-
This patch removes the gtk_calendar_select_day out of
calendar_set_month_prev & next functions, and moves them to where they
are needed, stopping the duplicate signals.
This is cleaner than the other patch I sent upstream.
** Patch added: "gtkcalendar.patch"
https://bugs.launchpad.net/ubuntu/
** Also affects: wxwidgets via
http://trac.wxwidgets.org/ticket/13224
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/785479
Title:
gtkcalendar emittin
** Bug watch added: GNOME Bug Tracker #106161
https://bugzilla.gnome.org/show_bug.cgi?id=106161
** Changed in: gtk
Remote watch: trac.wxwidgets.org/ #13224 => GNOME Bug Tracker #106161
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubunt
** Bug watch added: trac.wxwidgets.org/ #13224
http://trac.wxwidgets.org/ticket/13224
** Also affects: gtk via
http://trac.wxwidgets.org/ticket/13224
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/785479
Title:
gtkcalendar emitting incorrect day_selected signal
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mail
Public bug reported:
When clicking (or selecting via keyboard) on the days surrounding a
month in the gtk calendar widget, the widget emits two day_selected
events.
The first, with an incorrect date, is emitted by calendar_set_month_prev
& next functions.. the second emitted correctly from
calend
"radical reconceptualization of the GUI"?
It was working fine thanks! What was wrong with holding off on the gnome
3 update entirely until Unity became at least functional?
Gnome 3 Shell isn't even that bad.. I know it has it's haters too. (It
works well enough for me.) At least it has the capabi
Ubuntu does keep package statistics.. Unfortunately in this case, that
is one thing they did actually bother to implement the "opt out" feature
in.
It felt very good purging that trash from my umpteen systems knowing
packages stats were turned on.
--
You received this bug notification because yo
Half tempted to.. I was kinda joking about the Fork.. I've invested too
much time into Ubuntu to drop it stone dead.
But Ubuntu did fork from Debian with similar reasoning, except Debian's
inflexibility was with denying the use of non-free software.
It would be better if Ubuntu/Canonical could st
I bet Microsoft is absolutely loving seeing this division in the
community.. Ubuntu _was_ up till recently their biggest threat.
Good one canonical.
Now what am I looking for.. Knife? Spoon? No wait.. I know.. a Fork!
..from Debian. all I need is a real firefox, media support, a sexy boot
loader
Gnome3 shell is coming along fantastically. It's leaving Unity in the
dirt. (I'm using the Gnome3 PPA and loving it)
If personally feel if someone hadn't allowed their pride to be hurt we'd
be going in a better direction now.
I don't feel it's right denying users the choice, when such a fantastic
This "bug" has more to do with Ubuntu protocol and leadership than Unity
itself.
A large chunk of the Ubuntu community have had their opinions ignored
and made invalid to the point where they no longer feel welcome or
accepted into the community as a whole.
What is worse, this entire issue has be
*** This bug is a duplicate of bug 769232 ***
https://bugs.launchpad.net/bugs/769232
** This bug has been marked a duplicate of bug 769232
Codelite IDE (based on wxWidgets and Scintilla) has grey stripes
* You can subscribe to bug 769232 by following this link:
https://bugs.launchpad.net/
I have exactly the same problem with nVidia GeForce 9800gtx.
Exactly the same thing happens in CodeLite.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/770036
Title:
In Code::Blocks when scrolling t
*** This bug is a duplicate of bug 712291 ***
https://bugs.launchpad.net/bugs/712291
Excellent, thanks!
On Thu, Mar 24, 2011 at 3:34 AM, James Page
<740...@bugs.launchpad.net>wrote:
> *** This bug is a duplicate of bug 712291 ***
>https://bugs.launchpad.net/bugs/712291
>
> You should be
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/740379
Title:
package bacula-director-mysql 5.0.1-1ubuntu1 failed to
install/upgrade: subprocess installed post-installation script
returned error ex
Public bug reported:
Binary package hint: bacula
Bacula installation fails when setting up MySQL database. This happens
with both desktop and server releases 10.04.
ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: bacula-director-mysql 5.0.1-1ubuntu1
ProcVersionSignature: Ubuntu 2.6.32
http://jacksonlrh.blogbugs.org
--
Edgy - Hot keys for suspend/hibernate don't work
https://bugs.launchpad.net/bugs/62546
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://l
Thank you for working on this. using "old os" to access this
internal modem(Qualcomm gobi 2000)
in a Toshiba NB200. Can d/l any patches to my Karmic install.
please direct me to newbie instructions when this is fixed.
--
Qualcomm Gobi 2000 3G (gobi_loader/qcserial) broken
https://bugs.launchpad.
The gconf thing, whilst very hacky, did the trick for me. seems I'm having to
use it a lot lately :(
I now have a Do Nothing in the menu. Yay! Why wasn't it the default?
@Nicolo, the closed screen should still blank, the hardware switch is
(usually? :) wired to disable at least the backlight (whi
Thats OK, I'll chase upstream.. Just wanted to put a feeler out on this
one to see what others thought about it.
I agree the empty cdrom icon is kind of useful, because you can
(usually) eject/open the drive tray/etc.. (that's actually missing in
karmic at the moment, but that's another issue :)
Same problem here, Toshiba A200-psaf6a. Toshiba kernel modules not
built.
Karmic, 2.6.31-16-generic x86_64,
toshset 1.75-1
Bluetooth, hotkeys don't work.. rfid kill switch (fn-f8) doesn't work.
I haven't noticed any fan issues, but I haven't worked this spare notebook all
that much under ubunt
1 - 100 of 154 matches
Mail list logo
