Same here. Fix for me was to manually uninstall linux-firmware-raspi2
first. The new package installed fine after that.
Preparing to unpack .../linux-firmware-raspi_6-0ubuntu2_arm64.deb ...
Removing 'diversion of
/lib/firmware/brcm/brcmfmac43456-sdio.raspberrypi,4-model-b.txt to
/lib/firmware/b
** Attachment added: "kern.log"
https://bugs.launchpad.net/ubuntu/+source/linux-aws/+bug/1888936/+attachment/5395685/+files/kern.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1888936
Title:
Public bug reported:
We're running a server at AWS which collects data from machines over
CIFS. This involves a a lot of mounting and umounting of CIFS (about
100 targets with 2 shares each with 10 delay in between). The targets
might sometimes become unavailable when they turned of for the weeke
Public bug reported:
Trusty with apparmor 2.8.95~2430-0ubuntu5
Log entries with operation="signal" send aa-logprof into an infinite loop.
With LOGPROF_DEBUG=3 I get the following in /var/log/apparmor/logprof.log, then
aa-logprof is in busy loop.
[...]
2014-04-14 21:02:12,315 - ReadLog - read_lo
Public bug reported:
The byobu 5.35-0ubuntu1 deb has wrong md5 sums for three files:
# dpkg -s byobu
Package: byobu
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 543
Maintainer: Dustin Kirkland
Architecture: all
Version: 5.35-0ubuntu1
Replaces: byobu-extras (<< 2
SuSE's fix is here https://build.opensuse.org/request/show/162591
I just rebuilt 3.0.2-1ubuntu1 with their patch, vsftpd works fine now.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1160372
Title:
Public bug reported:
Version: 1.7-3
Hardcoded chain names in the init file are not very helpful as they are
hard to integrate with other software. E.g. shorewall needs
upnp_forward_chain=forwardUPnP
upnp_nat_chain=UPnP
There also should be a way to disable the iptables code in the init file
alt
Fixed in 1:1.8.3-1 for precise.
(Oneiric backport: https://launchpad.net/~jk/+archive/oneiric )
** Changed in: radvd (Ubuntu)
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launch
Public bug reported:
(gitolite 2.0.3-2)
Depending on the umask of the system the admin.pub file created by postinst
might not be readable for the gitolite user.
This means that gl-setup (which is run as gitolite) might not be able to read
the key:
===
$ dpkg-reconfigure gitolite
cp: cannot ope
*** This bug is a duplicate of bug 875466 ***
https://bugs.launchpad.net/bugs/875466
** This bug has been marked a duplicate of bug 875466
Lots of packages shipping with broken md5sums
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
Public bug reported:
This problem is easily noticeable on oneiric if you install the debsums
package and run 'debsums -s'
On a server system with only very small set of packages installed, I see broken
md5sums for these packages:
% sudo debsums -s
debsums: changed file
/usr/share/doc/libaprutil
Same problem on several machines here.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/807153
Title:
named does not shut down after "service bind9 stop"
To manage notifications about this bug go to:
Public bug reported:
Binary package hint: perl
debsums reports an error for /usr/share/doc/perl/changelog.Debian.gz
from perl-base_5.10.1-17ubuntu4.1 on Natty:
# debsums -s perl-base
debsums: changed file /usr/share/doc/perl/changelog.Debian.gz (from perl-base
package)
# ls -l /usr/share/doc/p
I'm seeing these semaphore errors with a backup-script that uses lvm2
snapshots after upgrading to natty.
I think this bug should be reopened and moved to the proper package
(lvm2?) and it should probably be merged with bug #753541
May 9 21:21:43 sphere udevd-work[5144]: inotify_add_watch(6, /d
*** This bug is a duplicate of bug 483890 ***
https://bugs.launchpad.net/bugs/483890
Still happens, there's more info in bug 483890.
** This bug has been marked a duplicate of bug 483890
Race conditions when creating multiple LVM2 snapshots
* You can subscribe to bug 483890 by following t
Public bug reported:
Binary package hint: udev
On two headless servers "restart udev" just hangs. When the udev
package gets updated the only way to get aptitude to complete the
upgrade is to kill the 'restart udev' process from the outside.
The last thing 'strace restart udev' shows is:
ocket(
The difference is that your example redirects both stdout and stderr
while mine only redirected stdout.
Anyway, your test shows the problem too: "5 -> /tmp/tmpfznXN8E"
shouldn't be there. There's a close missing somewhere in the child.
--
Fix for #151231 leaves tmpfile fd open in actual job
htt
Public bug reported:
Binary package hint: cron
Maverick with cron 3.0pl1-114ubuntu1
I just upgraded a lucid machine to maverick. Now my backup cronjob
spits out lots of warnings like:
File descriptor 5 (/tmp/tmpflCpLg8 (deleted)) leaked on lvcreate invocation.
Parent PID 7092: /bin/bash
File
Public bug reported:
Binary package hint: shorewall
Maverick's shorewall 4.4.10.1-1 and shorewall6 do not ship with
upstream's /usr/share/shorewall/helpers file.
The consequence is that if the user sets LOAD_HELPERS_ONLY=Yes in the
configuration, some essential helper modules won't be loaded (e.
Public bug reported:
Binary package hint: computer-janitor
computer-janitor (2.0.4-0ubuntu1) seems to depend on dbus although it
doesn't specify that. On a minimal maverick installation on a server I
got "Cannot contact Computer Janitor dbus service; try again."
# computer-janitor find
Cannot co
ppa2 only changed the postinst script, so the error should have been in
ppa1 too.
To what does /etc/resolv.conf point and does /var/run/resolvconf exist
after booting?
--
resolvconf starts after ifupdown, does not pick the dns-nameserver and
dns-search lines up from /etc/network/interfaces
http
The new package is in ppa:jk/ubuntu-fixes now. postinst now runs
"resolvconf -i" if the run dir doesn't exist yet.
--
resolvconf starts after ifupdown, does not pick the dns-nameserver and
dns-search lines up from /etc/network/interfaces
https://bugs.launchpad.net/bugs/448095
You received this
Sander, looks like a bug inherited from the lucid package. The postinst
script must run "resolvconf -i" instead of "resolvconf --enable-
updates". I'll upload a fixed package in a few minutes. (The current
package should work after "start resolvconf", though).
--
resolvconf starts after ifupdo
I've put a fixed build of resolvconf for maverick on
https://launchpad.net/~jk/+archive/ubuntu-fixes (ppa:jk/ubuntu-fixes)
The package contains the changes made by Simon Huerlimann and Sander van
Grieken.
Source code is available via above PPA and
https://code.launchpad.net/~jk/ubuntu/maverick/r
This is a regression from lucid. I just upgraded one machine to maverick and
now aa-logprof spits out thousands of warnings.
Jesse's patch looks fine.
--
logprof doesn't handle log messages without denied or requested masks correctly
https://bugs.launchpad.net/bugs/652674
You received this bug
As Anders said, conffiles don't get deleted by default.
Do 'dpkg -s resolvconf | grep /etc/init/', you should see that
/etc/init/resolvconf.conf is marked as obsolete.
--
resolvconf starts after ifupdown, does not pick the dns-nameserver and
dns-search lines up from /etc/network/interfaces
http
I agree with a7x. This is not fixed at all: Neither in lucid-proposed
(a7x's points 1, 2, and 3) nor in maverick (just point 2, 3 as the new
maverick package does have a 'sleep 1').
For the record, I did try the lucid-proposed package nevertheless.
syslog still reports 'mysql post-start process (
The new post-start script is broken, see bug #608423
--
[SRU] infinite loop in /etc/init/mysql.conf if mysqld is not running.
https://bugs.launchpad.net/bugs/551130
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Public bug reported:
5.1.41-3ubuntu12.4 from lucid-proposed has a broken post-start script.
After starting mysql, /var/log/syslog says:
init: mysql post-start process (11493) terminated with status 1
Looking at the post-start script shows two problems:
1) ret = $?
Note the spaces before and af
Argh, I meant lucid.
--
command finger outputs incorrect message
https://bugs.launchpad.net/bugs/379701
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/ma
Still happens with karmic.
--
command finger outputs incorrect message
https://bugs.launchpad.net/bugs/379701
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.
Reopened. The patch does not completely solve the problem:
The pid file doesn't get removed when irqbalance shuts down (missing
capabilities?) and the next start fails because of
open(...O_CREAT|O_EXCL...).
# sudo start irqbalance
irqbalance start/running, process 1347
# cat /var/run/irqbalance
** Changed in: irqbalance (Ubuntu)
Status: Fix Released => In Progress
--
Not stoppable/restartable via initctl
https://bugs.launchpad.net/bugs/580674
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ub
Public bug reported:
Binary package hint: ufw
[ufw_0.30pre1-0ubuntu2 on lucid]
ufw's postrm script does the following on purge:
for exe in iptables ip6tables
do
if which $exe > /dev/null 2>&1; then
$exe -P INPUT ACCEPT 2>/dev/null || true
Public bug reported:
Binary package hint: irqbalance
[irqbalance_0.55+20091017-3ubuntu2 on lucid]
irqbalance can not be stopped by upstart. 'stop irqbalance' just says
'Unknown instance'.
Note the different PIDs in the log below: 'start irqbalance' says
26320, while the actual running daemon
Public bug reported:
Binary package hint: shorewall
shorewall (and shorewall6) should be started by an upstart script in
lucid and later. If started from /etc/init.d, shorewall might come up
too late. Somebody might have already connected to a service (and may
continue communication via an ESTA
Yep, no more messages about symlinks with lucid.
I still do see some kind of race condition with lucid, though:
May 8 16:24:53 sphere udevd-work[24973]: inotify_add_watch(6, /dev/dm-23, 10)
failed: No such file or directory
May 8 16:25:04 sphere udevd-work[24973]: inotify_add_watch(6, /dev/dm-
*** This bug is a security vulnerability ***
Public security bug reported:
Binary package hint: apparmor
[lucid with apparmor 2.5-0ubuntu3]
Apparently apparmor profiles get loaded too late in the boot process to
confine all processes that have a profile defined.
Either /etc/init.d/apparmor sho
resolvconf (1.45ubuntu1ppa5) karmic; urgency=low
* Use /var/run in resolvonf binary.
-- Simon Huerlimann (CyT) Mon, 03 May 2010
00:27:16 +0200
Why RUN_DIR=${RESOLVCONF_RUNDIR:=/var/run}? Didn't you mean
/var/run/resolvconf?
That's what your postinst and apparmor use.
--
resolvconf star
** Patch added: "vsftpd-upstart.patch"
http://launchpadlibrarian.net/48017782/vsftpd-upstart.patch
--
Typo in etc/init/vsftpd.conf
https://bugs.launchpad.net/bugs/577165
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Public bug reported:
Binary package hint: vsftpd
[ -d /var/run/vsftpd/emply ] || install -m 755 -o root -g root -d
/var/run/vsftpd/empty
Obviously "emply" is not the same as "empty".
** Affects: vsftpd (Ubuntu)
Importance: Undecided
Status: New
--
Typo in etc/init/vsftpd.
Good catch, will give it a try.
Of course, /lib/udev/rules.d/65-dmsetup.rules isn't a conffile, so changes to
it will be lost when the dmsetup package gets upgraded.
(Also, this symlink rule isn't in lucid. On the other hand I didn't upgrade
any of the machines showing this problem to lucid yet
Public bug reported:
Binary package hint: ifupdown
None of the files installed under /etc are marked as configuration
files. User customizations to those files get overwritten without
warning when ifupdown is updated.
,
| $ dpkg -L ifupdown | grep /etc
| /etc
| /etc/network
| /etc/network/
** Patch added: "irqbalance.patch"
http://launchpadlibrarian.net/47256629/irqbalance.patch
** Description changed:
Binary package hint: irqbalance
[using 0.55+20091017-3ubuntu2 on lucid]
irqbalance gets enabled unconditionally upon installation. The user's
answer to the questio
Public bug reported:
Binary package hint: irqbalance
[using 0.55+20091017-3ubuntu2 on lucid]
irqbalance gets enabled unconditionally upon installation. The user's
answer to the question whether it should be enabled (upon installation
or dpkg-reconfigure) gets ignored:
,---
| $ cat /etc/default
Public bug reported:
Binary package hint: radvd
After upgrading an IPv6 router from karmic to lucid-rc, all hosts
(several Linux and OS X boxes) on the internal net lose external IPv6
connectivity after 30 minutes.
A little debugging with radvdump dump showed that radvd stops sending
multicasts
Removed the duplicate mark as I'm and others (see
https://bugs.launchpad.net/ubuntu/+source/udev/+bug/444563/comments/32
for example) are pretty sure it's a different thing.
--
Race conditions when creating multiple LVM2 snapshots
https://bugs.launchpad.net/bugs/483890
You received this bug notif
** This bug is no longer a duplicate of bug 444563
rename(/dev//.udev-tmp, /dev//) failed: Invalid cross-device link
--
Race conditions when creating multiple LVM2 snapshots
https://bugs.launchpad.net/bugs/483890
You received this bug notification because you are a member of Ubuntu
Bugs, which
Has anyone tested whether this is fixed in Lucid?
It would be a shame to make an LTS release with this bug.
It's slightly frightening to see /var/log/syslog filled by more than 50% by
these messages on servers that use snapshots for backups (I have that on some
Karmic machines). It might be a h
dmesg2.txt is obviously with a different kernel (the bug report was filed 4
months ago).
I can't tell whether the problem still occurs with this kernel, the machine is
in production and I won't experiment on it.
** Attachment added: "dmesg2.txt"
http://launchpadlibrarian.net/41626730/dmesg2.
resolvconf actually should already use /lib/init/rw/resolvconf with
/etc/resolvconf/run being a symlink to it. (At least for new
installations, for upgraded systems I had to fix this manually).
--
resolvconf starts after ifupdown, does not pick the dns-nameserver and
dns-search lines up from /e
Public bug reported:
Binary package hint: php5
Since yesterday I'm getting lots of bogus error messages from
curl_setopt($ch, CURLOPT_CONNECTTIMEOUT_MS, $value) and curl_setopt($ch,
CURLOPT_TIMEOUT_MS, $value) on my WordPress blog using php5-curl
5.2.10.dfsg.1-2ubuntu6.3:
curl_setopt(): CURL
Public bug reported:
Binary package hint: ulogd
ULOG has been declared obsolete in the kernel and it actually has been
removed from the IPv6 netfilter code already. The replacement is NFLOG.
ulogd-1.* only supports ULOG which makes it quite useless for people
with IPv6 firewalls. Please upgrade
Public bug reported:
Binary package hint: radvd
There's an 'i' missing in /etc/init.d/radvd's restart command:
# /etc/init.d/radvd restart
Stopping radvd: radvd.
/etc/init.d/radvd: 98: nvoke-rc.d: not found
# dpkg -l radvd
[...]
ii radvd1:1.2-1
*** This bug is a duplicate of bug 444563 ***
https://bugs.launchpad.net/bugs/444563
I'm not entirely convinced that is a duplicate too.
Additionally to the messages already reported I also see upstart-udev-bridge
restarting while creating the snapshots from time to time:
upstart-udev-bridge
While doing snapshots for backups I also this occasionally among the
other errors:
upstart-udev-bridge[25372]: Disconnected from Upstart
upstart-udev-bridge main process (25372) terminated with status 1
upstart-udev-bridge main process ended, respawning
--
rename(/dev//.udev-tmp, /dev//) failed:
Here's a simple test plug-in. It just builds a stack from 3 constant
values. With the attached version, you'll get errors in /var/log/munin
/munin-graph.log:
[...] ERROR: First field ("f2") of graph [...] "b483897" is STACK. STACK can
only be drawn after a LINEx or AREA.
[...] ERROR: First fiel
Public bug reported:
Binary package hint: apparmor
ii apparmor 2.3.1+1403-0ubuntu27.2
User-space parser utility for AppArmor
ii linux-source 2.6.31.15.28
** Attachment added: "cpuinfo.txt"
http://launchpadlibrarian.net/35866630/cpuinfo.txt
--
Data loss on ext3, maybe related to data=journal
https://bugs.launchpad.net/bugs/485562
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubun
** Attachment added: "lspci.txt"
http://launchpadlibrarian.net/35866626/lspci.txt
--
Data loss on ext3, maybe related to data=journal
https://bugs.launchpad.net/bugs/485562
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-b
** Attachment added: "dmesg.txt"
http://launchpadlibrarian.net/35866621/dmesg.txt
--
Data loss on ext3, maybe related to data=journal
https://bugs.launchpad.net/bugs/485562
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-b
Public bug reported:
I'm currently testing a backup scheme on a new karmic installation. The
procedure worked flawlessly on jaunty and older Ubuntu/Debian
distributions (albeit using hardware RAID on those, the new machine uses
a software RAID). With karmic however I'm experiencing data loss (at
(Coming from bug 483890)
I only see this happening when creating/removing snapshots for backup
not while booting. In addition to "rename(/dev//.udev-tmp, /dev//)
failed..." I also get "rmdir(/dev/) failed: Device or resource busy" and
some error messages when creating the snapshots:
Path /dev/
1.2.6-13ubuntu3 on karmic.
--
Wrong STACK check with custom colors
https://bugs.launchpad.net/bugs/483897
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/
Public bug reported:
Binary package hint: munin
When building a STACK with fields that specify a custom color munin-
graph erroneously gives this (non-fatal) error:
"ERROR: First field (\"$field\") of graph \"$domain\" :: \"$name\" ::
\"$service\" is STACK. STACK can only be drawn after a LINEx
** Attachment added: "btest.sh"
http://launchpadlibrarian.net/35763242/btest.sh
** Also affects: udev (Ubuntu)
Importance: Undecided
Status: New
--
Race conditions when creating multiple LVM2 snapshots
https://bugs.launchpad.net/bugs/483890
You received this bug notification becaus
Public bug reported:
Binary package hint: lvm2
I'm creating several LVM2 snapshots in quick succession for backup. The
attached bash script shows what is done.
If I run the script like it is I *always* get error messages on console and in
syslog, presumably all coming from udev. The snapshots
Public bug reported:
Binary package hint: uptimed
uptimed can't write its pid file (/var/run/uptimed) because user daemon
has no write permissions in /var/run.
** Affects: uptimed (Ubuntu)
Importance: Undecided
Status: New
--
Can't write its pid file
https://bugs.launchpad.net/bu
Still happens on Jaunty.
--
Can't create initramfs for module-less kernel
https://bugs.launchpad.net/bugs/172465
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubun
@komputes: No, miniupnpd is a UPnP and NAT-PMP traversal daemon.
Apples' AirPort and TimeCapsule run such a daemon too, not miniupnpd
though.
(Ubuntu users can already make port forwarding changes on Apple's time
capsule. Applications like Pidgin and Transmission speak UPnP and NAT-
PMP, they mak
Public bug reported:
Dovecot 1.2 with many new features is available now, current version is 1.2.1:
http://www.dovecot.org/list/dovecot-news/2009-July/000122.html
** Affects: dovecot (Ubuntu)
Importance: Undecided
Status: New
--
New upstream version
https://bugs.launchpad.net/bugs
71 matches
Mail list logo
