The workaround I found good at the time (see above) does not work with
lucid anymore.
After skimming through the xrandr-links in this bugreport I tried some
other workarounds.
This is what helps me under Kubuntu 10.04:
xrandr --output DP2 --mode 1920x1200
added as a desktop entry under systemse
I am finally able to print (@tomlaunch: hplip 3.19.2)!
My solution: I put my venerable G85 to pasture (the new ink cartridges did not
work either - this seems to be a hardware problem) and replaced it with an
Officejet Pro 8500.
Works now for all my PCs via Ethernet, printouts are better quali
lucid-updates
my "catch all" entry in /etc/apt/sources.list:
## Major bug fix updates produced after the final release of the distribution.
deb http://de.archive.ubuntu.com/ubuntu/ lucid-updates main restricted universe
multiverse
--
CUPS does not print to HP OfficeJet-G85
https://bugs.launchp
Yeah! Flipping the switch - again - makes the device scan
It even tried to print - what came out resembles a testpage and I could
print the subject of an email from KMail ...
The things changed: I installed the ubuntu5.1 version of Ghostscript
8.71 from lucid-updates.
So there is hope for 5.2
** Attachment added: "ew hp-check -r"
http://launchpadlibrarian.net/48441689/hp-check.log
--
CUPS does not print to HP OfficeJet-G85
https://bugs.launchpad.net/bugs/576491
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
** Attachment added: "syslog with the only errors I could find"
http://launchpadlibrarian.net/48440852/syslog
--
CUPS does not print to HP OfficeJet-G85
https://bugs.launchpad.net/bugs/576491
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
I can confirm this bug since 10.04
Printing a testpage from either hplib-gui or localhost:631 gives "Job
completed" but nothing gets printed
Linux ewX200 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010
x86_64 GNU/Linux
Bus 001 Device 006: ID 03f0:2f24 Hewlett-Packard
hp:/usb/Offic
is it THAT DIFFICULT to click on the link I provided?
--
[G45] No DisplayPort support in -intel driver
https://bugs.launchpad.net/bugs/378617
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.
FWIW:
I installed a new 2.6.31 Kernel as described here:
https://launchpad.net/~morgwai/+archive/intel-displayport
The last thing I saw (after disabling splash etc.) before my monitor went black
was:
failure to load KMS module(s)
On a Lenovo X200 with a docking station.
--
[G45] No DisplayPort
Hi Piotr,
I mixed up the repositories - now I have enabled your ppa again and DP
is "kind of working": artefacts, moving a window (e.g. Firefox with
running video) makes the xserver restart
I "cleaned" my xorg.conf:
Section "Device"
Identifier "Configured Video Device"
# Option
driver today 2:2.7.99.901+git20090624.f0270bbb-0ubuntu0sarvatt~jaunty
does not help either
xorg looks strange..."randr" disabled?
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/28374355/Xorg.0.log
--
[G45] No DisplayPort support in -intel driver
https://bugs.launchpad.ne
I quote from the forum post I mention:
Append the following text into the end of this file, then save and close:
Code:
deb http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu jaunty main #xorg-edgers PPA
deb-src http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu jaunty main
#xorg-edgers PPA
last two ro
FWIW:
DP stopped working after updating the last two rounds of intel-drivers
I am following the "bleeding edge" procedure mentioned in:
http://ubuntuforums.org/showthread.php?t=1130582
It was all fine for a month ...
--
[G45] No DisplayPort support in -intel driver
https://bugs.launchpad.net/bu
I can confirm this bug in Ubuntu 9.04 (my first steps with Gnome after
several years of KDE).
=== works =
edu...@nb-ewulff:~$ gksudo -d nautilus
No ask_pass set, using default!
xauth: /tmp/libgksu-u3Ectl/.Xauthority
STARTUP_ID: gksudo/nautilus/16567-0-nb-ewulff_TIME10844278
cmd[0
OK:
Option"AccelMethod" "uxa"
--
[q45] displayport monitors not detected in Intrepid
https://bugs.launchpad.net/bugs/328484
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.co
Piotr,
you made my day!!!
Thank you! My Ultrabase just became more useful with your driver.
Any idea how to enable UXA?
II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Comparing regs f
** Attachment added:
"Ubuntu_x64_Daily_2009-04-03_X200_plus_Ultrabase_Xorg.0.log"
http://launchpadlibrarian.net/24844917/Ubuntu_x64_Daily_2009-04-03_X200_plus_Ultrabase_Xorg.0.log
--
[igc4] displayport monitors not detected in Intrepid
https://bugs.launchpad.net/bugs/328484
You received thi
Hi Carey,
no change with the daily build black screen
I CAN start in with Displayport in VESA-mode. BUT: the resolution there is
1680x1050 - no use for my 1920x1200 monitor ...
Better VESA digital than analog INTEL me thinks. But for the native resolution
of my monitor there is ONLY analog
I tried the LiveCD of Kubuntu Jaunty x64 Beta:
same problem
As soon as the xorg takes over black screen.
--
[igc4] displayport monitors not detected in Intrepid
https://bugs.launchpad.net/bugs/328484
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Attachment added: "lspci_LENOVO_X200_w_Ultrabase.txt"
http://launchpadlibrarian.net/24831220/lspci_LENOVO_X200_w_Ultrabase.txt
--
[igc4] displayport monitors not detected in Intrepid
https://bugs.launchpad.net/bugs/328484
You received this bug notification because you are a member of Ubunt
I can confirm that his bandaid is working for me.
--
Screen Resolution is not being restored after relogin
https://bugs.launchpad.net/bugs/268434
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to kdebase-workspace in ubuntu.
--
kubuntu-bugs mail
I can confirm this for the Ultrabase Dockingstation of my Thinkpad X200.
Works perfectly with "the other" OS.
Intrepid with newer drivers (2.5.xppa) than release.
See
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/304871
I did not install the "pusher" version mention
confirmed here in intrepid when connecting via wvdial with my mobile
3.0.3+build1+nobinonly-0ubuntu1
--
[MASTER] [WORKAROUND] "Offline Mode" feature fails to detect proper online
state for networks that are managed outside of network manager.
https://bugs.launchpad.net/bugs/191889
You received
uname -r
2.6.27-6-generic
Bug is gone one the same machine.
I would mark this bug "fix released"
--
Kernel 2.6.27-5 breaks Intel graphics
https://bugs.launchpad.net/bugs/278942
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu
uname -a
Linux mylaeppi 2.6.27-5-generic #1 SMP Fri Oct 3 00:38:23 UTC 2008 i686
GNU/Linux
lspci
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated
Graphics C
Public bug reported:
Binary package hint: kdebase-workspace
I have an external monitor hooked up to my dockingstation.
I rotated the monitor (Viewsonic VP 211) left. It all works when set via
the systemsettings. 1200x1600 pixel.
When restarting the system it starts with the orientation and scre
Same problem here - non-KDE4 apps are the victims
Just tried quanta plus which is a KDE3 app.
--
kubuntu kde4 intrepid kickoff menu, items added to favourites dont keep correct
icon, generic gear shown
https://bugs.launchpad.net/bugs/254688
You received this bug notification because you are a m
Eric Laffoon, Project Lead - kdewebdev module, just confirmed this.
"We switched websites 5 years ago this is the first time it has been
brought to my attention AND all references from with binary packages are
correct."
--
quanta package description wrong website
https://bugs.launchpad.net/bugs/
Public bug reported:
Binary package hint: quanta
the package description lists
Homepage: http://quanta.sourceforge.net
it should list
http://kdewebdev.org/
Reason:
The project on sourgeforge seems abandoned to me - last entries in 2004
** Affects: kdewebdev (Ubuntu)
Importance: Undecid
FWIW:
I tried also the latest Debian Lenny installer.
Works fine with xfs-partitions on encrypted devices.
--
[intrepid] alternate installer hangs on ca-certificates
https://bugs.launchpad.net/bugs/272684
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
after trying vmware too
AND using ext3 as filesystems - everything works as expected (in
VirtualBox and vmware).
I remember the times when setting up encrypted devices manually:
I had to install xfsprogs because the initial ram disk (kernel, modules) had no
xfs support.
Could this be the case h
Forgot: Kubuntu
CD tests OK
** Description changed:
I am trying to install 8.10 Alpha6 alternate-cd into a VirtualBox 2.02
instance.
594 MB RAM
- Encrypted install, German Kaeyboard language
+ Encrypted install, German Keyboard and language
8 GB HD
100 MB /boot primary
-
Public bug reported:
I am trying to install 8.10 Alpha6 alternate-cd into a VirtualBox 2.02
instance.
594 MB RAM
Encrypted install, German Kaeyboard language
8 GB HD
100 MB /boot primary
6 GB / encrypted volume logigal xfs
1.9 GB /home encrypted volume logigal xfs
The installer hangs indef
work as expected in 7.10
for me: close this bug
Thanks!
--
Unable to adjust refresh rate..
https://bugs.launchpad.net/bugs/50048
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubunt
FWIW:
I have installed Kubuntu on this machine (typing from the fresh install) with
the ALTERNATE installer. I told the installer to format the partitions.
The machine has an ASUS A8V mobo (see lspci abvove). It has an old IDE drive in
it and a big, fast SAMSUNG SATA drive.
The (alternate) instal
** Attachment added: "installer-debug-log.txt"
http://launchpadlibrarian.net/9582232/installer-debug-log.txt
--
[gutsy beta] installer hangs when formatting partitions
https://bugs.launchpad.net/bugs/146687
You received this bug notification because you are a member of Ubuntu
Bugs, which is t
** Attachment added: "lspci"
http://launchpadlibrarian.net/9582224/lspci.txt
--
[gutsy beta] installer hangs when formatting partitions
https://bugs.launchpad.net/bugs/146687
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
** Attachment added: "partman.txt"
http://launchpadlibrarian.net/9582231/partman.txt
--
[gutsy beta] installer hangs when formatting partitions
https://bugs.launchpad.net/bugs/146687
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubunt
Public bug reported:
I tried to update my (cryptsetup) Kubuntu 7.04 with an earlier tribe.
This failed - I had hope ... ;-)
Now I am trying a clean install with the gutsy beta. I added to #122645
after tribe 4 but my comments there where deleted. It could be related
and I still do not understand
I can confirm this with Gutsy Kubuntu Tribe 5
Trying to format /dev/sda7 hangs the installer at "5%" (formatting
/dev/sda7).
I can format via qtparted or mkfs.xfs but since the installer wants to
format the partition when installing "/" on it pre-formatting is no help
...
--
[GUTSY] Crash after
Please close this bug.
I got my xorg.conf messed up somehow.
is there a difference between "DRI" and "dri" when loading modules?
I still do not know why my xorg.conf changed ...
** Attachment added: "xorg.conf from backup"
http://launchpadlibrarian.net/7934392/xorg.conf
--
[regression] lat
** Attachment added: "(EE) Failed to load module "DRI""
http://launchpadlibrarian.net/7922063/xorg.log
--
[regression] latest kernel 2.6.20.28.1 breaks DRI
https://bugs.launchpad.net/bugs/118196
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug conta
** Attachment added: "formerly working xorg.conf"
http://launchpadlibrarian.net/7908982/xorg.conf
--
[regression] latest kernel 2.6.20.28.1 breaks DRI
https://bugs.launchpad.net/bugs/118196
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact fo
Public bug reported:
this could be also a bug against linux-image-2.6.20-16-generic - not
sure where to report it
The latest kernel upgrade fixed my problem with my SD-card-reader (Bug
#53923) but disabled DRI.
glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx
I installed the kernel provided by Philip and SD cards work
automagically again on my HP nc64000 with Kubuntu 7.04.
Thank you!!!
Three partitions on a 512 MB Toshiba card:
[ 316.852000] tifm_core: MMC/SD card detected in socket 0:1
[ 317.604000] mmcblk0: mmc1:7562 SD512 500224KiB
[ 317.604000
I did install the package - it did not break anything. Booting as
before.
I can not confirm that it improved things since I patched my cryptsetup-
scripts manually before and disabled splash.
--
[Feisty] crypted root doesnt mount on start (cryptsetup)
https://bugs.launchpad.net/bugs/85640
You re
Pleas close this bug.
--
[Feisty] HP OfficeJet G85 USB does not print or scan
https://launchpad.net/bugs/92820
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
After having the same problem with another PC I switched the printer
cable.
It was a faulty cable!
Sorry for stirring ...
--
[Feisty] HP OfficeJet G85 USB does not print or scan
https://launchpad.net/bugs/92820
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/
cat /var/log/cups/error_log
- empty -
** Attachment added: "printingbuginfo"
http://librarian.launchpad.net/6846522/printingbuginfo.txt
--
HP Officejet USB does not print or scan
https://launchpad.net/bugs/92820
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu
lsmod|grep usb
usblp 14848 0
usb_storage72128 1
libusual 17936 1 usb_storage
usbhid 26592 0
hid27392 1 usbhid
scsi_mod 142348 5 usb_storage,sg,sd_mod,ahci,libata
usbcore 134280 8
wacom
Public bug reported:
When trying to print a test page or anything else from an application
from KDE or http://localhost:631/ nothing happens.
cups-error log is empty after printing
on startup it writes:
Creating missing directory "/var/run/cups/certs"
CUPS-Add-Modify-Printer: Unauthorized
Print
** Changed in: kvm (Ubuntu)
Status: Fix Released => Confirmed
--
kvm can't initialize due to old kvm kernel version
https://launchpad.net/bugs/80293
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Binary package hint: kcontrol
When i invoke kcontrol or Ubuntus "Systemsteuerung" and edit my samba-
shares using the expert-button in "Freigaben" (shares) I get this option
written into smb.conf:
msdfs proxy = no
sounds good but PREVENTS 100% that anybody from another mach
Public bug reported:
Binary package hint: cryptsetup
I am using (worked well in edgy) after a tweak (please see also bug
85640) an encrypted root partition in feisty.
I can NOT mount it readonly (-> no checks on startup). My kernel line in
menu.list of grub is now changed to:
kernel /v
For me the workaorund WITHOUT my patch works finally.
Be very careful when/from where/what to include in the initrd!
I wish (already on the list) there were a setup option to encrypt the
filesystem like in Debian etch.
Notebooks without HD-encryption ( / is essential IMO ) are a desaster
waiting
what do you think of my patch in bug 85640 ?
this applies to feisty though and there might be changes in the init
procedures compared to edgy.
--
Support for encrypted root filesystem (cryptsetup)
https://launchpad.net/bugs/21878
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:/
I can confirm this in feisty.
Workaround: see bug 21878
(https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/21878)
I also added:
setup_mapping()
{
+ # We need to wait for udev to do its stance
+ /sbin/udevsettle
I *think* it is redundant to the patch in 21878 but did not bother to
test i
I have the same problem here.
HP nc6400 (Notebook)
switched off DDC
xrandr lists only 60Hz (as I have force-configured it in xorg.conf)
1280x1024 gives 85Hz which my LCD (borked DDC-Infos from there) reports
being capable but causes it to flicker that I am in fear the monitor
wears out ...
80
58 matches
Mail list logo
