** Attachment added: "journal_previous_boot.log"
https://bugs.launchpad.net/ubuntu/+source/linux-intel-iotg/+bug/2119602/+attachment/5897033/+files/journal_previous_boot.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://b
Public bug reported:
Steps to reproduce：
1. Install and boot kernel 5.15.0-1085.91-intel-iotg on the DUT
2. Run suspend/suspend_advanced_auto via checkbox
3. DUT suspends, but test does not complete
Expected result：
DUT suspends, resumes, and continues to the next test. The test should
** Attachment added: "dmidecode.log"
https://bugs.launchpad.net/ubuntu/+source/linux-intel-iotg/+bug/2119602/+attachment/5897032/+files/dmidecode.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2
Public bug reported:
[Summary]
iwlwifi Microcode SW error detected during the SRU testing for Focal HWE
5.15.0.140.150~20.04.1 kernel.
[Expected result]
No failures
[Actual result]
Microcode software error detected during boot c5559bfc451e47ef9984289164e48702.
[Additional information]
See exam
After testing various monitors, I found that the first two monitors did
not display any output, while the third monitor functioned correctly. I
think the issue may be related to a connection problem like Alessandro
suspect or compatibility with specific monitors.
--
You received this bug notifica
Are you suggesting the issue might come from the monitor? I used two
monitors to reproduce the same issue, and both of them work on other
machines.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2085404
Public bug reported:
[Impact]
No display is shown after booting the machine.
[Reproduce]
1. connect a monitor to the machine and boot it.
2. ssh into the machine and check the display using the following commands:
$ export DISPLAY=":0.0"
$ xrandr
[Fail rate]
5/5 (100% failure rate)
[
@smb added the journalctl log in 5.15.0-124.
The url of checkbox submission:
https://certification.canonical.com/hardware/202111-29676/submission/400642/
** Attachment added: "journal_log_5-15-0-124.txt"
https://bugs.launchpad.net/ubuntu/+source/linux-hwe-5.15/+bug/2085082/+attachment/583075
Public bug reported:
[Impact]
Failed to detect audio sinks/sources.
[Test Case]
1. run "pactl list sinks short | grep -v -E "monitor|auto_null" to check if any
sinks was found
2. run "pactl list sources short | grep -v -E "monitor|auto_null" to check if
any sources was found
[Verify]
1. re
Hi Timo,
Confirmed that test passed after I upgrade the linux firmware to
20220329.git681281e4-0ubuntu3.34
log:
Outcome: job passed
[ Running job 2 / 2. Estimated time left: 0:00:02 ]
-[ Detect if at least one Wireless LAN device is detected ]
ID: com.cano
Hi Timo,
The test failed after I updated the linux-firmware to
https://launchpad.net/ubuntu/+source/linux-
firmware/20220329.git681281e4-0ubuntu3.32.
DUT: 201807-26342 - Dell - Precision 5530 - Berlinetta P MLK CFL
IP: 10.102.160.103
username: ubuntu
password: insecure
Reproduce steps:
1. Open `
Hi @rickywu,
here is the dmesg related to qca6174:
[ 1728.425730] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 1728.425866] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1728.425987] cfg80211: Loaded X.509 cert 'wens:
61c038651aabdcf94bd0ac7ff06c7248db
@rickywu passed after updated the firmware
log:
---[ Detect if at least one Wireless LAN device is detected ]---
ID: com.canonical.certification::wireless/detect
Category: Wireless networking tests
---
Public bug reported:
udev failed to detect wireless LAN at 5.15.0-116.126-generic.
It was passed at 5.15.0-115.125-generic.
terminal log:
ubuntu@dell-precision-5530-c26342:~$ nmcli device status
DEVICE TYPE STATE CONNECTION
enx00e04c68fef9 ethernet connected n
14 matches
Mail list logo
