From: Bharat Gooty
Parse different gpio properties from dt as part of probe
function. This detail is required to enable pinctrl pad
later when gpio lines are requested.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
From: Bharat Gooty
Add pinctrl_ops->request api to configure pctrl
pad register in gpio mode.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
Signed-off-by: Roman Bacik
---
(no changes since v1)
drivers/pinc
> -Original Message-
> From: Roman Bacik
> Sent: Friday, October 1, 2021 3:40 PM
> To: U-Boot Mailing List
> Cc: Bharat Gooty ; Rayagonda Kokatanur
> ; Roman Bacik
> ; Dario Binacchi ;
> Pratyush Yadav ; Simon Glass ;
> Vignesh Raghavendra
> Subject:
From: Bharat Gooty
Parse different gpio properties from dt as part of probe
function. This detail is required to enable pinctrl pad
later when gpio lines are requested.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
From: Bharat Gooty
Add pinctrl_ops->request api to configure pctrl
pad register in gpio mode.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
Signed-off-by: Roman Bacik
---
(no changes since v2)
Changes in
Add request tests to dm_test_pinctrl_single with corresponding node in
test.dts
Signed-off-by: Roman Bacik
---
Changes in v3:
- Add request API test to dm_test_pinctrl_single
arch/sandbox/dts/test.dts | 17 +
test/dm/pinmux.c | 13 +
2 files changed, 30
+Bharat Gooty
On Tue, Oct 5, 2021 at 9:50 AM Roman Bacik wrote:
>
> Add request tests to dm_test_pinctrl_single with corresponding node in
> test.dts
>
> Signed-off-by: Roman Bacik
>
> ---
>
> Changes in v3:
> - Add request API test to dm_test_pinctrl_single
>
On Mon, Oct 11, 2021 at 12:03 AM Bharat Gooty wrote:
>
> + Roman
> Thanks for the review Jagan. Will look and get back to you.
>
> Thanks,
> -Bharat
>
> On Fri, Oct 8, 2021 at 5:57 PM Jagan Teki wrote:
>>
>> On Wed, Aug 25, 2021 at 6:55 PM Bharat Kumar Reddy Gooty
>> wrote:
>> >
>> > From: Rayag
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v2:
- remove include spi-nor.h
- define and use named BITs for writing
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v3:
- fix warning by including linux/delay.h
- change ofdata_to_platdata to
From: Bharat Gooty
Following netXtreme commands are supported:-
Device probe, remove, supported speeds, get/set speeds and
get/set MAC address.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
(no changes since v1)
cmd/Kconfig | 2 +
cmd/broadcom/Kconfig | 10
From: Bharat Gooty
Following netXtreme commands are supported:-
Device probe, remove, supported speeds, get/set speeds and
get/set MAC address.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
(no changes since v1)
cmd/Kconfig | 2 +
cmd/broadcom/Kconfig | 10
From: Bharat Gooty
Broadcom bnxt L2 driver support. Used by the Broadcom
iproc platforms.
Signed-off-by: Bharat Gooty
Reviewed-by: Ramon Fried
Signed-off-by: Roman Bacik
---
Changes in v2:
- rebase and remove DM_PCI dependency from BNXT_ETH
- remove tautology assignment from debug_resp
> -Original Message-
> From: Marek Behún
> Sent: Monday, October 25, 2021 7:01 AM
> To: Roman Bacik
> Cc: U-Boot Mailing List ; Bharat Gooty
> ; Bin Meng ; Franck
> LENORMAND ; Heinrich Schuchardt
> ; Kory Maincent ;
> Michal Simek ; Patrick Delaunay
>
> -Original Message-
> From: Jagan Teki
> Sent: Sunday, October 24, 2021 11:44 PM
> To: Roman Bacik
> Cc: U-Boot Mailing List ; Rayagonda Kokatanur
> ; Bharat Gooty
>
> Subject: Re: [PATCH v3] driver: spi: add bcm iproc qspi support.
>
> On Thu, Oct 2
> -Original Message-
> From: Heinrich Schuchardt
> Sent: Saturday, October 23, 2021 1:02 AM
> To: Roman Bacik ; U-Boot Mailing List b...@lists.denx.de>
> Cc: Bharat Gooty ; Bin Meng
> ; Franck LENORMAND
> ; Kory Maincent
> ; Michal Simek ;
> Patrick Delauna
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v4:
- move iproc_qspi.c from spi to mtd/spi
- remove iproc_qspi.h
- rename
Include dm/device_compat.h to fix compilation.
Signed-off-by: Roman Bacik
---
drivers/usb/host/xhci-brcm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/host/xhci-brcm.c b/drivers/usb/host/xhci-brcm.c
index 27c4bbfcba72..fe17924028cd 100644
--- a/drivers/usb/host/xhci-brcm.c
On Mon, Oct 25, 2021 at 6:58 AM Marek Behún wrote:
>
> NAK for this driver.
>
> - display_banner() spams the output unnecessarily, the information
> should be printed with debug()
We will make the change as requested.
>
> - you are introducing custom mechanism for setting / getting PHY
> par
On Mon, Oct 25, 2021 at 3:22 PM Marek Behún wrote:
>
> On Mon, 25 Oct 2021 14:35:20 -0700
> Roman Bacik wrote:
>
> > > - you are introducing custom mechanism for setting / getting PHY
> > > parameters, via custom specific env variables, for example in t
From: Bharat Gooty
Following netXtreme commands are supported:
probe, remove.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
Changes in v3:
- remove commands set/get mac/speed
- add doc/bnxt.rst
cmd/Kconfig | 2 +
cmd/broadcom/Kconfig | 10 +
cmd/broadcom
From: Bharat Gooty
Broadcom bnxt L2 driver support. Used by the Broadcom
iproc platforms.
Signed-off-by: Bharat Gooty
Reviewed-by: Ramon Fried
Signed-off-by: Roman Bacik
---
Changes in v3:
- change printf to debug in display_banner
- remove get/set/print mac/speed
- remove
> -Original Message-
> From: Marek Behún
> Sent: Tuesday, October 26, 2021 6:18 AM
> To: Roman Bacik
> Cc: U-Boot Mailing List ; Bharat Gooty
> ; Aswath Govindraju govindr...@ti.com>; Bin Meng ; Franck
> LENORMAND ; Heinrich Schuchardt
> ; Kory Maincent
On Tue, Oct 26, 2021 at 8:55 AM Marek Behún wrote:
>
> On Tue, 26 Oct 2021 08:14:28 -0700
> Roman Bacik wrote:
>
> > Hi Marek,
> >
> > We do not want this driver to be automatically probed. It is not needed
> > all the time and also slows down the boot time.
On Tue, Oct 26, 2021 at 9:02 AM Roman Bacik wrote:
>
> On Tue, Oct 26, 2021 at 8:55 AM Marek Behún wrote:
> >
> > On Tue, 26 Oct 2021 08:14:28 -0700
> > Roman Bacik wrote:
> >
> > > Hi Marek,
> > >
> > > We do not want this driver to be
On Tue, Oct 26, 2021 at 9:52 AM Marek Behún wrote:
>
> On Tue, 26 Oct 2021 09:40:44 -0700
> Roman Bacik wrote:
>
> > On Tue, Oct 26, 2021 at 9:02 AM Roman Bacik
> > wrote:
> > >
> > > On Tue, Oct 26, 2021 at 8:55 AM Marek Behún wrote:
> >
> -Original Message-
> From: Marek Behún
> Sent: Tuesday, October 26, 2021 9:50 AM
> To: Roman Bacik
> Cc: Simon Glass ; U-Boot Mailing List b...@lists.denx.de>; Bharat Gooty ;
> Aswath Govindraju ; Bin Meng
> ; Franck LENORMAND
> ; Heinrich Schuchardt
> ;
Hi Simon,
> -Original Message-
> From: Simon Glass
> Sent: Wednesday, October 27, 2021 8:41 AM
> To: Roman Bacik
> Cc: Marek Behún ; U-Boot Mailing List b...@lists.denx.de>; Bharat Gooty ;
> Aswath Govindraju ; Bin Meng
> ; Franck LENORMAND
> ; Heinrich S
Hi Marek
> -Original Message-
> From: Marek Behún
> Sent: Wednesday, October 27, 2021 9:36 AM
> To: Roman Bacik
> Cc: Simon Glass ; U-Boot Mailing List b...@lists.denx.de>; Bharat Gooty ;
> Aswath Govindraju ; Bin Meng
> ; Franck LENORMAND
> ; Heinrich S
Marek, Simon,
Thank you very much for your comments. We will remove bnxt commands and will
probe bnxt driver each boot in the next version.
Thanks,
Roman
> -Original Message-
> From: Roman Bacik
> Sent: Wednesday, October 27, 2021 9:47 AM
> To: Marek Behún
> Cc: Simon
Hi Marek,
> -Original Message-
> From: Marek Behún
> Sent: Wednesday, October 27, 2021 10:40 AM
> To: Roman Bacik
> Cc: Simon Glass ; U-Boot Mailing List b...@lists.denx.de>; Bharat Gooty ;
> Aswath Govindraju ; Bin Meng
> ; Franck LENORMAND
> ; Heinrich S
From: Bharat Gooty
Load NetXtreme firmware in board_init when BNXT_ETH is selected.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
Changes in v4:
- remove bnxt command
- load bnxt firmware in board_init
Changes in v3:
- remove commands set/get mac/speed
- add doc/bnxt.rst
From: Bharat Gooty
Broadcom bnxt L2 driver support. Used by the Broadcom
iproc platforms.
Signed-off-by: Bharat Gooty
Reviewed-by: Ramon Fried
Signed-off-by: Roman Bacik
---
Changes in v4:
- remove static num_cards and use dev_seq(dev) instead
- add .probe
- merged probe/remove methods
Hi Marek,
On Sat, Oct 30, 2021 at 8:00 AM Marek Behún wrote:
>
> Hello Roman,
>
> On Thu, 28 Oct 2021 16:29:28 -0700
> Roman Bacik wrote:
>
> > +void bnxt_env_set_ethaddr(struct udevice *dev)
> > +{
> > + struct eth_pdata *plat = dev_get_plat(dev);
>
Hi Marek,
> -Original Message-
> From: Marek Behún
> Sent: Sunday, October 31, 2021 3:56 AM
> To: Roman Bacik
> Cc: U-Boot Mailing List ; Bharat Gooty
> ; Joe Hershberger
> ; Ramon Fried ;
> p...@kernel.org
> Subject: Re: [PATCH v4 1/2] net: brcm: netXtrem
From: Bharat Gooty
Load NetXtreme firmware in board_init when BNXT_ETH is selected.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
(no changes since v4)
Changes in v4:
- remove bnxt commands
- load bnxt firmware in board_init
Changes in v3:
- remove commands set/get mac/speed
From: Bharat Gooty
Broadcom bnxt L2 driver support. Used by the Broadcom
iproc platforms.
Signed-off-by: Bharat Gooty
Reviewed-by: Ramon Fried
Signed-off-by: Roman Bacik
---
Changes in v5:
- remove bnxt_env_set_ethaddr/bnxt_env_del_ethaddr methods
- add .read_rom_hwaddr
Hi Jagan,
On Mon, Nov 1, 2021 at 12:12 AM Jagan Teki wrote:
>
> On Tue, Oct 26, 2021 at 1:07 AM Roman Bacik wrote:
> >
> > From: Rayagonda Kokatanur
> >
> > IPROC qspi driver supports both BSPI and MSPI modes.
> >
> > Signed-off-by: Rayagonda
Hi Jagan,
> -Original Message-
> From: Jagan Teki
> Sent: Monday, November 1, 2021 10:07 PM
> To: Roman Bacik
> Cc: U-Boot Mailing List ; Rayagonda Kokatanur
> ; Bharat Gooty
> ; Vignesh R
> Subject: Re: [PATCH v4] driver: spi: add bcm iproc qspi support.
>
Hi Marek,
> -Original Message-
> From: Marek Behún
> Sent: Tuesday, November 2, 2021 5:07 AM
> To: Roman Bacik
> Cc: U-Boot Mailing List ; Bharat Gooty
> ; Joe Hershberger
> ; Ramon Fried
> Subject: Re: [PATCH v5 1/2] net: brcm: netXtreme driver
>
> On M
From: Bharat Gooty
Load NetXtreme firmware in board_init when BNXT_ETH is selected.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
(no changes since v4)
Changes in v4:
- remove bnxt commands
- load bnxt firmware in board_init
Changes in v3:
- remove commands set/get mac/speed
From: Bharat Gooty
Broadcom bnxt L2 driver support. Used by the Broadcom
iproc platforms.
Signed-off-by: Bharat Gooty
Reviewed-by: Ramon Fried
Signed-off-by: Roman Bacik
---
Changes in v6:
- remove bnxt_eth_* env variables
- clean up include headers
Changes in v5:
- remove
Hi Pali,
> -Original Message-
> From: Pali Rohár
> Sent: Wednesday, November 3, 2021 4:14 PM
> To: Roman Bacik
> Cc: U-Boot Mailing List ; Bharat Gooty
> ; Joe Hershberger
> ; Ramon Fried
> Subject: Re: [PATCH v6 1/2] net: brcm: netXtreme driver
>
> He
From: Bharat Gooty
Load NetXtreme firmware in board_init when BNXT_ETH is selected.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
(no changes since v4)
Changes in v4:
- remove bnxt commands
- load bnxt firmware in board_init
Changes in v3:
- remove commands set/get mac/speed
Hi Pali,
On Fri, Nov 5, 2021 at 2:09 PM Pali Rohár wrote:
>
> On Friday 05 November 2021 12:54:24 Roman Bacik wrote:
> > > > + pci_read_word16(bp->pdev,
> > > > + PCI_SUBSYSTEM_VENDOR_ID,
> > > > + &bp->s
On Fri, Nov 5, 2021 at 2:29 PM Pali Rohár wrote:
>
> On Friday 05 November 2021 14:19:46 Roman Bacik wrote:
> > Hi Pali,
> >
> > On Fri, Nov 5, 2021 at 2:09 PM Pali Rohár wrote:
> > >
> > > On Friday 05 November 2021 12:54:24 Roman Bacik wro
On Fri, Nov 5, 2021 at 3:04 PM Pali Rohár wrote:
>
> On Friday 05 November 2021 22:09:47 Pali Rohár wrote:
> > On Friday 05 November 2021 12:54:24 Roman Bacik wrote:
> > > > > + pci_read_word16(bp->pdev,
> > > > > +
From: Bharat Gooty
Load NetXtreme firmware in board_init when BNXT_ETH is selected.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
(no changes since v4)
Changes in v4:
- remove bnxt commands
- load bnxt firmware in board_init
Changes in v3:
- remove commands set/get mac/speed
From: Bharat Gooty
Broadcom bnxt L2 driver support. Used by the Broadcom
iproc platforms.
Signed-off-by: Bharat Gooty
Reviewed-by: Ramon Fried
Signed-off-by: Roman Bacik
---
Changes in v8:
- remove PCICFG_ME_REGISTER
Changes in v7:
- move bnxt_*.h files to drivers/net/bnxt/
- remove
> -Original Message-
> From: Pali Rohár
> Sent: Sunday, November 7, 2021 1:44 AM
> To: Roman Bacik
> Cc: U-Boot Mailing List ; Bharat Gooty
> ; Joe Hershberger
> ; Ramon Fried
> Subject: Re: [PATCH v8 1/2] net: brcm: netXtreme driver
>
> Hello!
>
>
From: Bharat Gooty
Load NetXtreme firmware in board_init when BNXT_ETH is selected.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
(no changes since v4)
Changes in v4:
- remove bnxt commands
- load bnxt firmware in board_init
Changes in v3:
- remove commands set/get mac/speed
From: Bharat Gooty
Broadcom bnxt L2 driver support. Used by the Broadcom
iproc platforms.
Signed-off-by: Bharat Gooty
Reviewed-by: Ramon Fried
Signed-off-by: Roman Bacik
---
Changes in v9:
- remove bnxt_ver.h
- add DRIVER_VERSION_* definitions to bnxt.h
- remove pci_read_/pci_write_
On Mon, Nov 8, 2021 at 10:40 AM Roman Bacik wrote:
>
> From: Bharat Gooty
>
> Broadcom bnxt L2 driver support. Used by the Broadcom
> iproc platforms.
>
> Signed-off-by: Bharat Gooty
> Reviewed-by: Ramon Fried
>
> Signed-off-by: Roman Bacik
> ---
>
&g
From: Bharat Gooty
Load NetXtreme firmware in board_init when BNXT_ETH is selected.
Signed-off-by: Bharat Gooty
Signed-off-by: Roman Bacik
---
(no changes since v4)
Changes in v4:
- remove bnxt commands
- load bnxt firmware in board_init
Changes in v3:
- remove commands set/get mac/speed
From: Bharat Gooty
Broadcom bnxt L2 driver support. Used by the Broadcom
iproc platforms.
Signed-off-by: Bharat Gooty
Reviewed-by: Ramon Fried
Signed-off-by: Roman Bacik
---
Changes in v10:
- move unnecessary code from bnxt_read_rom_hwaddr to bnxt_eth_probe
Changes in v9:
- remove
Hi Marek,
> -Original Message-
> From: Marek Behún
> Sent: Monday, November 8, 2021 3:43 PM
> To: Roman Bacik
> Cc: U-Boot Mailing List ; Pali Rohar
> ; Bharat Gooty ; Joe
> Hershberger ; Ramon Fried
>
> Subject: Re: [PATCH v10 1/2] net: brcm: netXtreme drive
On Mon, Nov 8, 2021 at 5:12 PM Marek Behún wrote:
>
> On Mon, 8 Nov 2021 16:48:33 -0800
> Roman Bacik wrote:
>
> > To be honest changing status codes coming from FW does not seem right. But
> > we will try to make the requested changes.
>
> I looked at kernel'
On Tue, Nov 9, 2021 at 12:37 AM Ramon Fried wrote:
>
> On Tue, Nov 9, 2021 at 4:55 AM Marek Behún wrote:
> >
> > On Mon, 8 Nov 2021 18:20:43 -0800
> > Roman Bacik wrote:
> >
> > > On Mon, Nov 8, 2021 at 5:12 PM Marek Behún wrote:
> > > >
>
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v5:
- add binding document
- implement spi-mem interface for bspi mode
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v6:
- remove priv->mode_4byte
- remove IPROC_BSPI_READ_SUPPORTED
Chan
On Wed, Nov 17, 2021 at 1:25 PM Roman Bacik wrote:
>
> From: Rayagonda Kokatanur
>
> IPROC qspi driver supports both BSPI and MSPI modes.
>
> Signed-off-by: Rayagonda Kokatanur
> Signed-off-by: Bharat Gooty
> Acked-by: Rayagonda Kokatanur
>
> Signed-off-by: Rom
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v7:
- remove hardcorded IPROC_BSPI_READ_DUMMY_CYCLES
- remove unnecessary
class &= ~PCI_BRIDGE_CTRL_REG_CLASS_MASK;
> + class |= (PCI_CLASS_BRIDGE_PCI << 8);
> iproc_pci_raw_config_write32(pcie, 0,
> PCI_BRIDGE_CTRL_REG_OFFSET,
> 4, class);
> --
> 2.20.1
>
Acked-by: Roman Bac
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v12:
- fix typo FLASH_BIT to FLUSH_BIT
- return -EBUSY instead of -1 from
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v8:
- add 4-byte address support
Changes in v7:
- remove hardcorded
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v9:
- merge bspi_set_4byte_mode to bspi_set_flex_mode
- simplify bspi_set_flex_mode using data from
Hi Jagan,
On Wed, Dec 15, 2021 at 11:49 PM Jagan Teki wrote:
>
> On Wed, Dec 1, 2021 at 11:40 PM Roman Bacik wrote:
> >
> > IPROC qspi driver supports both BSPI and MSPI modes.
> >
> > Signed-off-by: Rayagonda Kokatanur
> > Signed-off-by: Bharat Goot
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v10:
- remove binding document
- use defined values for delays and timeouts
- replace timer-based logic
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v11:
- fix condition for readl_poll_timeout in bspi_read_via_raf
Changes
69 matches
Mail list logo
