On 2023-09-06 17:01, Laurentiu Tudor wrote:
MC being a plain DMA master as any other device in the SoC and
being live at OS boot time, as soon as the SMMU is probed it
will immediately start triggering faults because there is no
mapping in the SMMU for the MC. Pre-create such a mapping in
the SMM
On 2023-09-06 19:10, Laurentiu Tudor wrote:
On 9/6/2023 8:21 PM, Robin Murphy wrote:
On 2023-09-06 17:01, Laurentiu Tudor wrote:
MC being a plain DMA master as any other device in the SoC and
being live at OS boot time, as soon as the SMMU is probed it
will immediately start triggering
On 2023-12-15 7:13 am, Kever Yang wrote:
Hi Jagan,
On 2023/12/15 14:36, Jagan Teki wrote:
Hi Heiko/Kerver/Anatoloj,
On Mon, Dec 11, 2023 at 2:30 PM Jagan Teki
wrote:
Unlike RK3399, Sunxi/Meson DW HDMI the new Rockchip SoC Rk3328 would
support external vendor PHY with DW HDMI chip.
Support
On 2020-07-02 09:48, Jagan Teki wrote:
The new rk3288 revision rk3288w has some changes with respect
to legacy rk3288 like hclk_vio and usb host0 ohci.
In order to work these on the same in Linux kernel update the
compatible the root compatible with rockchip,rk3288w before
booting.
So, this sup
On 2020-07-03 11:10, Jagan Teki wrote:
On Thu, Jul 2, 2020 at 7:26 PM Robin Murphy wrote:
On 2020-07-02 09:48, Jagan Teki wrote:
The new rk3288 revision rk3288w has some changes with respect
to legacy rk3288 like hclk_vio and usb host0 ohci.
In order to work these on the same in Linux
On 2020-04-25 8:36 pm, Jagan Teki wrote:
On Sun, Apr 26, 2020 at 12:23 AM Mark Kettenis wrote:
From: Jagan Teki
Date: Sat, 25 Apr 2020 16:33:51 +0530
Add Rockchip PCIe controller driver for rk3399 platform.
Driver support Gen1 by operating as a Root complex.
Thanks to Patrick for initial
On 17/10/2019 20:07, Jagan Teki wrote:
Rockchip has documentation file, doc/README.rockchip but
which is not so readable to add or understand the existing
contents. Even the format that support is legacy readme
in U-Boot.
Add rockchip specific documentation file using new rst
format, which descr
On 2020-06-09 15:01, Jagan Teki wrote:
SDHCI HISPD bits need to be configured based on desired mmc
timings mode and some HISPD quirks.
So, handle the HISPD bit based on the mmc computed selected
mode(timing parameter) rather than fixed mmc card clock
frequency.
Linux handle the HISPD similar li
On 16/04/2019 11:56, Jagan Teki wrote:
sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
indeed failed to detect the sdcard on the board with below error
Card did not respond to voltage select!
So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
is already defined in rk3399
On 08/05/2019 06:41, Jagan Teki wrote:
sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
indeed failed to detect the sdcard on the board with below error
Card did not respond to voltage select!
So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
is already defined in rk3399
Hi Andre,
On 2021-12-14 17:55, Andre Przywara wrote:
The Juno Arm development board is an open, vendor-neutral, Armv8-A
development platform.
Add documentation that briefly outlines the hardware, and describes
building and installation of U-Boot.
Signed-off-by: Andre Przywara
---
doc/board/a
11 matches
Mail list logo
