- }
+ /* Wait 15ms to make sure the PHY has come out of hard reset */
+ mdelay(15);
return get_phy_device_by_mask(bus, phy_mask, interface);
}
Any ideas on how to fix this issue properly?
Or patch above is good enough to be merged into the u-boot source tree?
--
Best regards,
Oleh Kravchenko
Board designed for quick prototyping and has one microSD port,
2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO,
UART interfaces, and 2 RGB LEDs.
Signed-off-by: Oleh Kravchenko
---
MAINTAINERS | 10 +
arch/arm/dts/Makefile
A simple prototyping board with one microSD port, one Ethernet port,
2 USB ports, I2C, SPI, GPIO, and UART interfaces.
Signed-off-by: Oleh Kravchenko
---
MAINTAINERS | 2 +
arch/arm/dts/Makefile| 3 +
arch/arm/dts/ev-imx280-nano-x
ACK
01.05.24 05:42, Tom Rini:
Remove from this board vendor directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini
---
Cc: Oleh Kravchenko
---
board/out4/o4-imx6ull-nano/o4-imx6ull-nano.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/board/out4/o4
The current U-Boot version has the next matches for boot partitions:
> mmc0boot0 to EMMC_BOOT1
> mmc0boot1 to EMMC_BOOT1 (should be EMMC_BOOT2)
This patch fixes a typo for the boot partition number.
Signed-off-by: Oleh Kravchenko
Cc: Pantelis Antoniou
Cc: Marek Vasut
---
drivers/fa
Board designed for quick prototyping and has one microSD port,
2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO,
UART interfaces, and 2 RGB LEDs.
Signed-off-by: Oleh Kravchenko
Cc: Stefano Babic
---
MAINTAINERS | 10 +
arch/arm/dts/Makefile
A simple prototyping board with one microSD port, one Ethernet port,
2 USB ports, I2C, SPI, GPIO, and UART interfaces.
Signed-off-by: Oleh Kravchenko
Cc: Stefano Babic
---
MAINTAINERS | 2 +
arch/arm/dts/Makefile| 3 +
arch/arm/dts
ther issue:
> Erasing the USER partition (CONFIG_FASTBOOT_MMC_USER_SUPPORT), will
> erase active selected hwpart, and in case it was called after
> erasing/flashing BOOT1 & BOOT2 it will erase last selected boot
> partition, instead of USER.
>
> чт, 13 мая 2021 г. в 11:42
Signed-off-by: Oleh Kravchenko
Cc: Pantelis Antoniou
Cc: Marek Vasut
---
drivers/fastboot/fb_mmc.c | 22 +-
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/fastboot/fb_mmc.c b/drivers/fastboot/fb_mmc.c
index 8e74e50e91..7e61fbac17 100644
--- a/drivers
'gpt' and 'mmc0' fastboot partitions have been treated as the same device,
but it is wrong.
Signed-off-by: Oleh Kravchenko
Cc: Pantelis Antoniou
Cc: Marek Vasut
---
drivers/fastboot/fb_mmc.c | 21 -
1 file changed, 16 insertions(+), 5 deletions(-)
Hello guys,
Could you please review this patch?
> 13 трав. 2021 р. о 17:23 Oleh Kravchenko пише:
>
> 'gpt' and 'mmc0' fastboot partitions have been treated as the same device,
> but it is wrong.
>
> Signed-off-by: Oleh Kravchenko
> Cc: Pantelis Antoni
ould like to remove these MMC_BOOT2 options but I haven't gotten around
> to it.
>
> On 5/12/21 6:43 PM, Oleh Kravchenko wrote:
>> The current U-Boot version has the next matches for boot partitions:
>>> mmc0boot0 to EMMC_BOOT1
>>> mmc0boot1 to EMMC_BOO
The current U-Boot version has the next matches for boot partitions:
> mmc0boot0 to EMMC_BOOT1
> mmc0boot1 to EMMC_BOOT1 (should be EMMC_BOOT2)
This patch fixes a typo for the boot partition number.
Signed-off-by: Oleh Kravchenko
Cc: Pantelis Antoniou
Cc: Marek Vasut
---
Changes
'gpt' and 'mmc0' fastboot partitions have been treated as the same device,
but it is wrong.
Signed-off-by: Oleh Kravchenko
Cc: Pantelis Antoniou
Cc: Marek Vasut
---
Changes for v2:
- code cleanup;
Changes for v3:
- QA passed at https://github.com/u-boot/u-boot/pull/75
Board designed for quick prototyping and has one microSD port,
2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO,
UART interfaces, and 2 RGB LEDs.
Signed-off-by: Oleh Kravchenko
Cc: Stefano Babic
---
Changes for v3:
- QA passed at https://github.com/u-boot/u-boot/pull/77
A simple prototyping board with one microSD port, one Ethernet port,
2 USB ports, I2C, SPI, GPIO, and UART interfaces.
Signed-off-by: Oleh Kravchenko
Cc: Stefano Babic
---
Changes for v3:
- QA passed at https://github.com/u-boot/u-boot/pull/77
MAINTAINERS
Hello guys,
Could you please review and merge this patch?
PR successfully passed CI:
https://github.com/u-boot/u-boot/pull/76
15.05.21 00:06, Oleh Kravchenko пише:
> The current U-Boot version has the next matches for boot partitions:
>> mmc0boot0 to EMMC_BOOT1
>> mmc0boot1 to EMM
Hello guys,
Could you please review and merge this patch?
PR successfully passed CI:
https://github.com/u-boot/u-boot/pull/75
15.05.21 00:15, Oleh Kravchenko пише:
> 'gpt' and 'mmc0' fastboot partitions have been treated as the same device,
> but it is wrong.
>
>
Hello guys,
Could you please review and merge these patches?
PR successfully passed CI:
https://github.com/u-boot/u-boot/pull/77
15.05.21 00:18, Oleh Kravchenko пише:
> A simple prototyping board with one microSD port, one Ethernet port,
> 2 USB ports, I2C, SPI, GPIO, and UART inte
Hello Sean,
Could you please clarify what you have mean?
I think you pointing to this?
> fastboot_raw_partition_= [mmcpart ]
Because I don't have idea how aliases will help to flash.
15.05.21 00:45, Sean Anderson пише:
> On 5/14/21 5:26 PM, Oleh Kravchenko wrote:
>> Hello g
Hello Sean,
Please see my comments below:
15.05.21 01:10, Oleh Kravchenko пише:
> Hello Sean,
> Could you please clarify what you have mean?
>
> I think you pointing to this?
>> fastboot_raw_partition_= [mmcpart ]
>
> Because I don't have idea how aliases will he
Raw Image
u-boot> wrote 411697152 bytes to '0:0'
15.05.21 01:26, Sean Anderson пише:
>
>
> On 5/14/21 6:10 PM, Oleh Kravchenko wrote:
>> Hello Sean,
>> Could you please clarify what you have mean?
>>
>> I think you pointing to this?
>>
$ fastboot flash -raw2sparse 0.2:0 u-boot.bin
linux> target reported max download size of 268435456 bytes
linux> Sending '0.2:0' (440 KB)...
linux> OKAY [ 0.020s]
linux> Writing '0.2:0'...
linux> OKAY [ 0.113s]
linux> Finished. Total time: 0.168s
15.05.2
Any updates on these?
15.05.21 00:26, Oleh Kravchenko пише:
> Hello guys,
> Could you please review and merge this patch?
>
> PR successfully passed CI:
> https://github.com/u-boot/u-boot/pull/75
>
> 15.05.21 00:15, Oleh Kravchenko пише:
>> 'gpt' and 'm
Hello Tom,
18.05.21 15:21, Tom Rini пише:
> On Tue, May 18, 2021 at 01:41:06PM +0300, Oleh Kravchenko wrote:
>
>> Any updates on these?
> Sorry, my reading of what you and Sean were saying left me with the
> impression no code changes were needed in the end, is that not t
Hello Tom,
18.05.21 16:40, Tom Rini пише:
> On Tue, May 18, 2021 at 04:24:49PM +0300, Oleh Kravchenko wrote:
>> Hello Tom,
>>
>> 18.05.21 15:21, Tom Rini пише:
>>> On Tue, May 18, 2021 at 01:41:06PM +0300, Oleh Kravchenko wrote:
>>>
>>>> Any upda
'gpt' and 'mmc0' fastboot partitions have been treated as the same device,
but it is wrong.
Fill disk_partition structure with eMMC user partition info
to properly flash data.
Signed-off-by: Oleh Kravchenko
Cc: Pantelis Antoniou
Cc: Marek Vasut
Cc: Sean Anderson
Cc: Tom
Hello Sean,
Could you please take a look?
I've updated the patch.
19.05.21 13:31, Oleh Kravchenko пише:
> 'gpt' and 'mmc0' fastboot partitions have been treated as the same device,
> but it is wrong.
>
> Fill disk_partition structure with eMMC user pa
Hello Pali,
Is there some wiki page on how to flash u-boot and Linux to N900 (JTAG,
UART, etc.)?
I have this device and would like to play with that.
19.05.21 16:27, Pali Rohár пише:
> On Tuesday 18 May 2021 21:26:40 Tom Rini wrote:
>> This board has not been converted to CONFIG_DM_USB by the de
Thank you, Sean!
Could you please take a look at this patch too?
https://patchwork.ozlabs.org/project/uboot/patch/20210514210620.24715-1-o...@kaa.org.ua/
20.05.21 17:32, Sean Anderson пише:
>
>
> On 5/19/21 6:31 AM, Oleh Kravchenko wrote:
>> 'gpt' and 'mmc0&
Hello Lukasz,
Could you please review this patch?
This patch fixes small typos for Fastboot mmc boot2 partition.
20.05.21 17:59, Sean Anderson пише:
>
>
> On 5/14/21 5:06 PM, Oleh Kravchenko wrote:
>> The current U-Boot version has the next matches for boot partitions:
&
Hello Lukasz,
Could you please review this patch too?
This patch fixes Fastboot behaviour,
when flashing or erasing of eMMC user area was requested.
20.05.21 18:00, Sean Anderson пише:
>
>
> On 5/20/21 10:44 AM, Oleh Kravchenko wrote:
>> Thank you, Sean!
>>
>> Coul
Hello Tom,
coud you please cherry-pick this patch?
Lukasz doesn't respond :(
20.05.21 18:23, Oleh Kravchenko пише:
> Hello Lukasz,
> Could you please review this patch too?
>
> This patch fixes Fastboot behaviour,
> when flashing or erasing of eMMC user area was requested
Hello Morten,
Start from bisecting a bad commit.
Then it will be easy to say what is wrong.
--
Best regards,
Oleh Kravchenko
> 28 трав. 2021 р. о 19:14 Morten Bruun пише:
>
> Hi,
>
> I'm working on a project where we recently upgraded to Yocto/hardknott.
>
> A
CTIVE_LOW>;
> - reg = <4>;
> };
>
> - led@5 {
> + led5 {
> color = ;
> gpios = <&pcf8574a 5 GPIO_ACTIVE_LOW>;
> - reg = <5>;
> };
> };
>
>
Reviewed-by: Oleh Kravchenko
Sad to hear it.
Rest in peace Wolfgang Denk.
--
Best regards,
Oleh Kravchenko
> 21 жовт. 2022 р. о 18:11 Stefano Babic пише:
>
> Dear U-Boot community,
>
> it is my very sad duty to inform you that Wolfgang Denk, the father of
> U-Boot, passed away last week. We have lost
ver Graute (maintainer:i.MX8QM CGTQMX8
BOARD)
Cc: Anatolij Gustschin (maintainer:CAPRICORN BOARD)
Cc: Peng Fan (maintainer:i.MX8QM MEK BOARD)
Cc: Fabio Estevam (maintainer:i.MX8QXP MEK BOARD)
Cc: Oleh Kravchenko (maintainer:OUT4-IMX6ULL-NANO BOARD)
Cc: Joe Hershberger (maintainer:NETWORK)
Cc: R
I'm confused by dt-bindings/gpio/gpio.h because it has a few macros
- GPIO_PULL_UP
- GPIO_PULL_DOWN
Should I keep everything in the pinctrl driver?
Or should I implement pull-up/down in GPIO driver to support these macros and
Drive Strength in pinctrl driver?
--
Best regards,
Oleh
Hello guys!
I think the CI verification job for u-boot patches should be updated to include
CFLAGS like -O0
Because I'm not able to build u-boot for Raspberry Pi (or to another board)
with -O0
Here the commands how to quickly reprodice the problem:
export ARCH=arm64
export CROSS_COMPILE
Hello Tom,
for what reason it's not supported?
I'm finding that very useful for debugging.
Only a few issues with conditional compilation breaks it.
Also this issue reproducible if -DDEBUG=1 is used.
--
Best regards,
Oleh Kravchenko
> 9 лист. 2021 р. о 20:52 Tom Rini пише:
>
questions I'm just curious.
--
Best regards,
Oleh Kravchenko
;out" `struct usb_ep` descriptor, but not
ep0?
--
Best regards,
Oleh Kravchenko
I will take a look on it?
30.08.21 20:39, Tom Rini пише:
> Hey all,
>
> Here's the latest report.
>
> - Forwarded message from scan-ad...@coverity.com -
>
> Date: Mon, 30 Aug 2021 16:58:54 + (UTC)
> From: scan-ad...@coverity.com
> To: tom.r...@gmail.com
> Subject: New Defects reported
Hello Tom!
Looks like it a false positive detection.
info and dev_desc are validated in few lines above:
609 | if (!info.name[0] &&
610 | fastboot_mmc_get_part_info(cmd, &dev_desc, &info, response)
< 0)
611 | return;
30.08.21 20:39, Tom Rini пише:
> Hey all,
>
> Here's the late
Hello, U-Boot community!
I've started porting U-Boot to the new SoC and have a few questions about how
to do it properly.
Could you please give advice or point me to examples where U-Boot provides tiny
SPL?
Does it make sense to use SPL_DM if IPL limits the size of SPL up to 4K?
Hello Angus!
What is the use-case for these patches?
Would you mind defining why the current implementation is not enough?
Used like that:
> FB: flash -raw2sparse mmc0 emmc.wic
> 17 груд. 2021 р. о 17:41 Angus Ainslie написав(ла):
>
> NXP's mfgtool needs some additional switches to deal with t
18.12.21 16:34, Angus Ainslie пише:
Hi Oleh
On 2021-12-18 00:44, Oleh Kravchenko wrote:
Hello Angus!
What is the use-case for these patches?
Would you mind defining why the current implementation is not enough?
Used like that:
FB: flash -raw2sparse mmc0 emmc.wic
Thanks, it looks
Make O4-iMX6ULL-NANO-based board compatible with Yocto layer meta-out4 and
fix device flashing by UUU (aka MFG Tools).
Signed-off-by: Oleh Kravchenko
---
arch/arm/dts/o4-imx-nano.dts | 4 ++--
configs/ev-imx280-nano-x-mb_defconfig | 5 +
configs/o4-imx6ull-nano_defconfig | 5
Make O4-iMX6ULL-NANO-based board compatible with Yocto layer meta-out4 and
fix device flashing by UUU (aka MFG Tools).
Signed-off-by: Oleh Kravchenko
---
arch/arm/dts/o4-imx-nano.dts | 4 ++--
configs/ev-imx280-nano-x-mb_defconfig | 5 +
configs/o4-imx6ull-nano_defconfig | 5
Hello Tom,
20.12.21 15:50, Tom Rini пише:
These dt changes are just whitespace? Are they resyncing with the
upstream dts as well? But, unrelated, changes, yes?
Yes, yes and yes :)
--
Best regards,
Oleh Kravchenko
20.12.21 15:57, Tom Rini пише:
On Mon, Dec 20, 2021 at 03:52:21PM +0200, Oleh Kravchenko wrote:
Hello Tom,
20.12.21 15:50, Tom Rini пише:
These dt changes are just whitespace? Are they resyncing with the
upstream dts as well? But, unrelated, changes, yes?
Yes, yes and yes :)
OK
Make O4-iMX6ULL-NANO-based board compatible with Yocto layer meta-out4 and
fix device flashing by UUU (aka MFG Tools).
Signed-off-by: Oleh Kravchenko
---
configs/ev-imx280-nano-x-mb_defconfig | 5 +
configs/o4-imx6ull-nano_defconfig | 5 +
2 files changed, 10 insertions(+)
diff
52 matches
Mail list logo
