On Wed, Mar 3, 2021 at 3:36 PM Tom Rini wrote:
>
> On Wed, Mar 03, 2021 at 05:41:57PM +0100, Marek Behun wrote:
> > On Wed, 3 Mar 2021 11:11:59 -0500
> > Tom Rini wrote:
> >
> > > On Wed, Mar 03, 2021 at 05:11:59AM +0100, Marek Behún wrote:
> > >
> > > > Hello,
> > > >
> > > > I have managed to a
On Thu, Mar 4, 2021 at 4:43 AM Marek Behun wrote:
>
> On Wed, 3 Mar 2021 16:36:05 -0500
> Tom Rini wrote:
>
> > So, as I start testing things locally with two additional changes (1.
> > LTO by default 2. No ffunction/data-sections with LTO) we see:
> > https://gist.github.com/trini/350ab850c42293
On Thu, Mar 4, 2021 at 7:50 AM Marek Behun wrote:
>
> On Thu, 4 Mar 2021 07:46:18 -0600
> Adam Ford wrote:
>
> > On Thu, Mar 4, 2021 at 4:43 AM Marek Behun wrote:
> > >
> > > On Wed, 3 Mar 2021 16:36:05 -0500
> > > Tom Rini wrote:
> > >
On Tue, Apr 28, 2020 at 8:04 AM Marek Vasut wrote:
>
> On 4/28/20 2:45 PM, Adam Ford wrote:
> > On Wed, Mar 25, 2020 at 11:47 AM Marek Vasut wrote:
> >>
> >> Perform DM conversion of the SMC911x driver.
> >>
> >> Note that the DT compatible is s
On Thu, Mar 4, 2021 at 8:58 AM Tom Rini wrote:
>
> On Thu, Mar 04, 2021 at 07:46:18AM -0600, Adam Ford wrote:
> > On Thu, Mar 4, 2021 at 4:43 AM Marek Behun wrote:
> > >
> > > On Wed, 3 Mar 2021 16:36:05 -0500
> > > Tom Rini wrote:
> > >
> &
On Thu, Mar 4, 2021 at 9:11 AM Tom Rini wrote:
>
> On Thu, Mar 04, 2021 at 08:41:23AM -0600, Adam Ford wrote:
> > On Tue, Apr 28, 2020 at 8:04 AM Marek Vasut wrote:
> > >
> > > On 4/28/20 2:45 PM, Adam Ford wrote:
> > > > On Wed, Mar 25, 20
On Thu, Mar 4, 2021 at 9:15 AM Adam Ford wrote:
>
> On Thu, Mar 4, 2021 at 9:11 AM Tom Rini wrote:
> >
> > On Thu, Mar 04, 2021 at 08:41:23AM -0600, Adam Ford wrote:
> > > On Tue, Apr 28, 2020 at 8:04 AM Marek Vasut wrote:
> > > >
> > > > On
With bd_info dropped from the data section, the Logic PD OMAP3 boards
and AM3517 fail to boot. Enabling CONFIG_SPL_ALLOC_BD restores
them.
Fixes: 38d6b7ebdaee ("spl: Drop bd_info in the data section")
Signed-off-by: Adam Ford
diff --git a/configs/am3517_evm_defconfig
On Thu, Mar 4, 2021 at 9:59 AM Marek Behun wrote:
>
> On Thu, 4 Mar 2021 09:07:33 -0600
> Adam Ford wrote:
>
> > Interesting. with LTO enabled, the DRAM reports 7.2 GB and hangs.
> > Without LTO, U-Boot boots fine.
> >
> > LTO:
> > OMAP3630/3730-GP E
On Thu, Mar 4, 2021 at 4:33 PM Marek Behun wrote:
>
> On Thu, 4 Mar 2021 16:18:03 -0600
> Adam Ford wrote:
>
> > diff --git a/arch/arm/mach-omap2/omap3/Makefile
> > b/arch/arm/mach-omap2/omap3/Makefile
> > index 91ed8ebc9f..a2cc21c6d2 100644
> > --- a/arch/arm
On Fri, Mar 5, 2021 at 6:31 AM Stefan Roese wrote:
>
> On 05.03.21 12:25, Adam Ford wrote:
> > On Thu, Mar 4, 2021 at 4:33 PM Marek Behun wrote:
> >>
> >> On Thu, 4 Mar 2021 16:18:03 -0600
> >> Adam Ford wrote:
> >>
> >>> diff --gi
CONFIG_SPL_BUILD, it caused boot errors with devices
that are not booting from NOR. Fix the boot issues by moving
SPL_PAD_TO out so it's always.
Fixes: 7bb33e4684aa ("ARM: da850-evm: Unify config options with Kconfig")
Signed-off-by: Adam Ford
diff --git a/include/configs/da850
On Fri, Mar 5, 2021 at 11:10 AM Adam Ford wrote:
>
> On Fri, Mar 5, 2021 at 6:31 AM Stefan Roese wrote:
> >
> > On 05.03.21 12:25, Adam Ford wrote:
> > > On Thu, Mar 4, 2021 at 4:33 PM Marek Behun wrote:
> > >>
> > >> On Thu
On Fri, Mar 5, 2021 at 9:03 PM Adam Ford wrote:
>
> On Fri, Mar 5, 2021 at 11:10 AM Adam Ford wrote:
> >
> > On Fri, Mar 5, 2021 at 6:31 AM Stefan Roese wrote:
> > >
> > > On 05.03.21 12:25, Adam Ford wrote:
> > > > On Thu, Mar 4, 2021 at 4:33 PM
On Sat, Mar 6, 2021 at 3:49 PM Marek Behun wrote:
>
> On Sat, 6 Mar 2021 22:38:52 +0100
> Pali Rohár wrote:
>
> > On Saturday 06 March 2021 22:19:22 Marek Behun wrote:
> > > On Sat, 6 Mar 2021 22:00:45 +0100
> > > Pali Rohár wrote:
> > >
> > > > On Saturday 06 March 2021 21:54:00 Marek Behun wro
try_unlock_memory() is only used in one file, so make it static
in that file and remove it from the sys_proto header file. This
may help with some further optimization in the future.
Signed-off-by: Adam Ford
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h
b/arch/arm/include/asm/arch
secureworld_exit() is only used in one file, so make it static
to that file and remove it from sys_proto.h. This
may help with some further optimization in the future.
Signed-off-by: Adam Ford
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h
b/arch/arm/include/asm/arch-omap3
secure_unlock_mem() is only used in one file, so make it static
in that file. This
may help with some further optimization in the future.
Signed-off-by: Adam Ford
diff --git a/arch/arm/mach-omap2/omap3/board.c
b/arch/arm/mach-omap2/omap3/board.c
index 879b0f..74b5a4b111 100644
--- a/arch
On Sat, Mar 6, 2021 at 10:26 PM Marek Behún wrote:
>
> Adam Ford says that DM3730 needs board.c compiled without LTO flags.
>
> Also add clock.c, since it says in Makefile that it need different
> flags.
>
I managed to get the am3517_evm tested with the latest series, and
e safe since the only real difference between them is the
device tree reference.
The RZ/G2 boards from Beacon don't use SPL, but wIthout LTO:
U-Boot 784324
With LTO:
U-Boot 757202
For a reduction of:
-27122 (-3.46%)
> Signed-off-by: Marek Behún
> Tested-by: Adam Ford
On Mon, Mar 8, 2021 at 2:35 PM Tim Harvey wrote:
>
> On Mon, Mar 8, 2021 at 8:47 AM Tim Harvey wrote:
> >
> > On Sat, Mar 6, 2021 at 6:10 PM Marek Behun wrote:
> > >
> > > [sorry for the spam, I accidentally sent this e-mail from my personal
> > > address]
> > >
> > > Hello Tim,
> > >
> > > you
On Mon, Mar 8, 2021 at 3:57 PM Tim Harvey wrote:
>
> On Mon, Mar 8, 2021 at 12:43 PM Adam Ford wrote:
> >
> > On Mon, Mar 8, 2021 at 2:35 PM Tim Harvey wrote:
> > >
> > > On Mon, Mar 8, 2021 at 8:47 AM Tim Harvey wrote:
> > > >
> >
x27;t only used for booting from SPI,
because it is also used for booting from MMC and NAND for those
devices supporting those boot options.
Signed-off-by: Adam Ford
diff --git a/doc/README.davinci b/doc/README.davinci
index 6522c24eea..607531af2a 100644
--- a/doc/README.davinci
+++ b/doc/README.da
ption of CONFIG_MTD_NOR_FLASH.
Since this board is the only board that uses these two config options,
they can be removed from the whitelist table.
Signed-off-by: Adam Ford
diff --git a/board/davinci/da8xxevm/da850evm.c
b/board/davinci/da8xxevm/da850evm.c
index a3b0f8bf09..c91aeb8dbf 100644
In order to build boards based on the R8A774A1, there needs to
be a config option from which to enable other drivers and/or flags
for this SoC.
Signed-off-by: Adam Ford
---
V3: No change
V2: No change
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index
The r8a774a1 is compatible with the generic rcar-gen3-sdhi controller.
This patch adds the compatibilty flag, to support the SDHI controller.
Signed-off-by: Adam Ford
---
V3: Use generic rcar-gen3-sdhi reference instead of SoC reference
V2: No Change
diff --git a/drivers/mmc/renesas-sdhi.c b
support to the shdi driver.
Finally, it will add support for the Beacon EmbeddedWorks RZ/G2M dev kit
Adam Ford (6):
ARM: renesas: Add basic R8A774A1 Support
ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1
clk: renesas: Add R8A774A1 clock tables
pinctrl: renesas: Enable R8A774A1 PFC tables
The PFC tables for the R8A774A1 are already available, but they
not enabled.
This patch adds the Kconfig option and builds the corresponding file
when PINCTRL_PFC_R8A774A1 is enabled.
Signed-off-by: Adam Ford
---
V3: Reorder references to R8A774A1 to more closely match Linux's order
V2:
This patch imports the device tree and required bindings to permit
the device tree to build for the R8Z774A1 (RZ/G2M).
Signed-off-by: Adam Ford
---
V3: No change
V2: No change
diff --git a/arch/arm/dts/r8a774a1.dtsi b/arch/arm/dts/r8a774a1.dtsi
new file mode 100644
index 00
This sync's the clock tables with the official release from
Linux 5.8-RC2 and update r8a774a1_mstp_table from Ref Manual
v1.00.
Signed-off-by: Adam Ford
---
V3: Use clock tables from Linux instead of Renesas' U-Boot repo
Fix the r8a774a1_mstp_table to match ref manual v1.00
V2:
The Beacon EmbeddedWorks kit is based on the R8A774A1 SoC also
known as the RZ/G2M.
The kit consists of a SOM + Baseboard and supports microSD,
eMMC, Ethernet, a couple celular radios, two CAN interfaces,
Bluetooth and WiFi.
Signed-off-by: Adam Ford
---
V3: Remove unnecessary/unwanted code
On Tue, Jun 30, 2020 at 11:56 AM Tom Rini wrote:
>
> Disable USB support for now. There is non-trivial work required to
> fully move the OMAP3 platforms to DM. While this work is in-progress,
> disable USB support for now as we've gone well past the migration
> deadlin
On Tue, Jun 30, 2020 at 12:14 PM Tom Rini wrote:
>
> On Tue, Jun 30, 2020 at 12:07:51PM -0500, Adam Ford wrote:
> > On Tue, Jun 30, 2020 at 11:56 AM Tom Rini wrote:
> > >
> > > Disable USB support for now. There is non-trivial work required to
> > > fully
On Tue, Jun 30, 2020 at 2:02 PM Tom Rini wrote:
>
> At this point in time we can now remove our legacy code and switch to
> enabling DM for USB and Ethernet.
>
> Cc: Derald D. Woods
> Cc: Adam Ford
> Signed-off-by: Tom Rini
> ---
> board/ti
This converts the following to Kconfig:
CONFIG_SPL_NAND_DRIVERS
CONFIG_SPL_NAND_ECC
CONFIG_SPL_NAND_SIMPLE
Signed-off-by: Adam Ford
---
The following appear as 'suspicious' but I think it's because
they don't have SPL enabled:
at91sam9x5ek_nandflash_defconfig
This converts the following to Kconfig:
CONFIG_SPL_NAND_BASE
CONFIG_SPL_NAND_IDENT
Signed-off-by: Adam Ford
diff --git a/README b/README
index b6d368041c..60d8e77256 100644
--- a/README
+++ b/README
@@ -2307,8 +2307,6 @@ The following options need to be configured
This converts the following to Kconfig:
CONFIG_DRIVER_TI_EMAC_USE_RMII
Signed-off-by: Adam Ford
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 58fb91c1c5..a78a596d4d 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -62,6 +62,7
The Kconfig already has BOOTP_DNS2, but not all boards have been
converted. This finishes converting the following to Kconfig:
CONFIG_BOOTP_DNS2
Signed-off-by: Adam Ford
diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
index 326882908b..4e6a3ca446 100644
--- a
This converts the following to Kconfig:
CONFIG_BOOTP_SEND_HOSTNAME
Signed-off-by: Adam Ford
diff --git a/README b/README
index 60d8e77256..6bac583666 100644
--- a/README
+++ b/README
@@ -1427,7 +1427,6 @@ The following options need to be configured:
CONFIG_BOOTP_NISDOMAIN
BOOTP_DEFAULT is defined in several boards, but this config
option is never checked or used.
This patch removes this config option from config files and
the whitelist.txt
Signed-off-by: Adam Ford
diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h
index c88067c012
This converts the following to Kconfig:
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
Signed-off-by: Adam Ford
diff --git a/README b/README
index 6bac583666..b45c7b27d7 100644
--- a/README
+++ b/README
@@ -2275,10 +2275,6 @@ The following options need to be configured:
parameters from
I have a board already supported in U-Boot based on the i.MX8MM with
LPDDR4, and with a simple part change, we have built a Nano version as
well with the same LPDDR4.
I have mostly copied the imx8mn EVK files to the board support, and
migrated the device tree files for my board. I also created a
On Wed, Oct 30, 2019 at 12:13 PM Tom Rini wrote:
>
> Hey all,
>
> It's a few days past release day, and here finally is v2020.01-rc1. The
> delay was over hoping to be able to pull in one more big clean up series
> that we need, and I want to take, but needs a little more work. Doing
> that has
oader if any of those devices are not
available.
Fixes: 9fb50c68daa6 ("ARM: imx6q_logic: Fix MMC2 booting")
Signed-off-by: Adam Ford
diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c
index 3c1a3a9fa2..fc4ce34ce4 100644
--- a/board/logicpd/imx6/imx6logic.c
+++
The PMIC enables power to the MMC card by default, but depending
on the state it was left when restarted, it's possible the MMC
may be powered down.
This patch patch explicitly tells the twl4030 to power the MMC.
Signed-off-by: Adam Ford
diff --git a/board/logicpd/omap3som/omap3logic
The only GPIO bank needed in SPL is GPIO4 and the SPL space is tight.
This patch removes the all but GPIO4 from the spl device tree to
reduce the SPL footprint.
Signed-off-by: Adam Ford
diff --git a/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
b/arch/arm/dts/logicpd-torpedo-37xx
The SPL is too tight, and it cannot start any longer. To
help reduce the size of SPL, we need to remove some non-critical
features.
This reverts commit 66063a7c1388fb724e8671b03c529fb5cda992dd.
Signed-off-by: Adam Ford
diff --git a/configs/omap35_logic_defconfig b/configs
The only GPIO bank needed in SPL is GPIO4 and the SPL space is tight.
This patch removes the all but GPIO4 from the spl device tree to
reduce the SPL footprint.
Signed-off-by: Adam Ford
diff --git a/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi
b/arch/arm/dts/logicpd-som-lv-37xx-devkit
The SPL is too tight, and it cannot start any longer. To
help reduce the size of SPL, we need to remove some non-critical
features.
This patch removes SPL_GPIO_SUPPORT to free up some operating space.
Signed-off-by: Adam Ford
diff --git a/configs/omap3_logic_somlv_defconfig
b/configs
The options to enable CMD_NANDBCB appear when the i.MX6 is not the
target architecture, but it only applies to the i.MX6.
This patch makes the option depend on ARCH_MX6 so it's hidden
from irrelevant platforms.
Signed-off-by: Adam Ford
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mac
There is an option to enable the board detection for TI platforms.
If this is option is not set, there is no reason to set the EEPROM
bus address or chip address.
This patch makes both EEPROM_BUS_ADDRESS and EEPROM_CHIP_ADDRESS
depend on TI_I2C_BOARD_DETECT.
Signed-off-by: Adam Ford
diff --git
There is a menu option to enable ZYNQMP_FIRMWARE even when
ARCH_ZYNQMP is not enabled.
This makes ZYNQMP_FIRMWARE depend on ARCH_ZYNQMP to help
quiet unrelated options in menuconfig.
Signed-off-by: Adam Ford
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index b70a206355
On Fri, Nov 8, 2019 at 9:50 AM Bartosz Golaszewski
wrote:
>
> pt., 25 paź 2019 o 18:10 Bartosz Golaszewski napisał(a):
> >
> > czw., 26 wrz 2019 o 01:21 Faiz Abbas napisał(a):
> > >
> > > Hi,
> > >
> > > On 29/07/19 12:28 PM, Bartosz Golaszewski wrote:
> > > > From: Bartosz Golaszewski
> > > >
On Sun, Nov 10, 2019 at 1:22 AM Peter Howard wrote:
>
> On Thu, 2019-11-07 at 15:05 -0500, Tom Rini wrote:
> > On Thu, Nov 07, 2019 at 08:53:09AM -0700, Simon Glass wrote:
> >
> > > At present this driver is enabled in SPL on omapl138_lcdk, which
> > > uses
> > > of-platdata. The driver needs to b
-boot-spl
Thumb:
textdata bss dec hex filename
2023240041376 25612640c spl/u-boot-spl
Signed-off-by: Adam Ford
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index 9821df9884..16287a4ac2 100644
--- a/configs/omapl138_lcdk_defc
In order to further prepare for full device tree support in SPL,
this patch enables both SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATE.
Both of these are already enabled in U-Boot, so SPL will have
the same functionality
Signed-off-by: Adam Ford
diff --git a/configs/omapl138_lcdk_defconfig b/configs
Driver model requires a malloc pool to allocate memory before
relocations to operate serial and some other devices. This patch
increases the pool size to 2K.
Signed-off-by: Adam Ford
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index cceb0c408e..376bb9f953
In preparation to use full device tree support, SPL can separate
BSS from text region.
This patch enables SPL_SEPARATE_BSS.
Signed-off-by: Adam Ford
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index 16287a4ac2..cceb0c408e 100644
--- a/configs
On Sun, Nov 10, 2019 at 5:08 AM Adam Ford wrote:
>
> On Sun, Nov 10, 2019 at 1:22 AM Peter Howard
> wrote:
> >
> > On Thu, 2019-11-07 at 15:05 -0500, Tom Rini wrote:
> > > On Thu, Nov 07, 2019 at 08:53:09AM -0700, Simon Glass wrote:
> > >
> > &g
startup time.
This patch switches SKIP_LOWLEVEL_INIT to SKIP_LOWLEVEL_INIT_ONLY
thus, enabling the cache.
Signed-off-by: Adam Ford
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 1c41e7e97a..3b5c085a24 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include
On Fri, Nov 8, 2019 at 11:59 AM Bartosz Golaszewski wrote:
>
> pt., 8 lis 2019 o 18:33 Bartosz Golaszewski
> napisał(a):
> >
> > pt., 8 lis 2019 o 17:14 Adam Ford napisał(a):
> > >
> > > On Fri, Nov 8, 2019 at 9:50 AM Bartosz Golaszewski
> > >
The da850-evm doesn't have the boot pins configured in a way
to make MMC/SD booting an option, and MMC/SD support is not
enabled in SPL. Therefore, there is no need to support raw mode
mmc/sd support in SPL.
This patch disables CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
Signed-off-by:
eed or use OF_PLATDATA for
device tree support. It does not disable OF_PLATDATA.
Signed-off-by: Adam Ford
diff --git a/arch/arm/dts/da850-lcdk-u-boot.dtsi
b/arch/arm/dts/da850-lcdk-u-boot.dtsi
index 541f4ca200..b372d06ca9 100644
--- a/arch/arm/dts/da850-lcdk-u-boot.dtsi
+++ b/arch/arm/dts/da
On Thu, Apr 9, 2020 at 1:48 AM Lokesh Vutla wrote:
>
>
>
> On 26/03/20 8:56 PM, Adam Ford wrote:
> > With the converstion of SMC911x to DM, this can facilitate the omap3
> > boards from LogicPD (now called Beacon EmbeddedWorks) to be converted.
> > There isn'
On Sat, Apr 25, 2020 at 5:42 AM Pali Rohár wrote:
>
> On Thursday 02 April 2020 20:42:31 Pali Rohár wrote:
> > On Wednesday 01 April 2020 12:32:29 Merlijn Wajer wrote:
> > > Hi,
> > >
> > > On 01/04/2020 00:42, Pali Rohár wrote:
> > > > On Wednesday 01 April 2020 00:35:07 Pali Rohár wrote:
> > > >
Tom,
I noticed the stats for January 2020.01 haven't been released.
https://www.denx.de/wiki/U-Boot/ReleaseCycle
Is that no longer going to be supported?
I only ask, because I don't see any reference to 2020.04 at all.
thanks,
adam
On Sat, Apr 25, 2020 at 6:50 AM Pali Rohár wrote:
>
> On Saturday 25 April 2020 06:36:58 Adam Ford wrote:
> > On Sat, Apr 25, 2020 at 5:42 AM Pali Rohár wrote:
> > >
> > > On Thursday 02 April 2020 20:42:31 Pali Rohár wrote:
> > > > On Wednesday
SPL is just simply too tight and we don't really have any
room to shave off any more functionality, so we need OF_PLATDATA
in SPL.
This patch adds the manual enumeration of serial and MMC while
removing the device tree support in SPL and enabling
SPL_OF_PLATDATA.
Signed-off-by: Adam Ford
Beacon EmbeddedWorks, formerly known as Logic PD, is releasing
a devkit based on the i.MX8M Mini SoC consisting of baseboard +
SOM.
It supports eMMC on the SOM, microSD on the baseboard, various
GPIO, the PINCTRL, and UART.
Signed-off-by: Adam Ford
---
The device tree files are pulled from
On Sun, Apr 26, 2020 at 2:12 PM Marek Vasut wrote:
>
> On 4/26/20 6:45 PM, Adam Ford wrote:
> > Beacon EmbeddedWorks, formerly known as Logic PD, is releasing
> > a devkit based on the i.MX8M Mini SoC consisting of baseboard +
> > SOM.
> >
> > It supports eMMC
This patch synchronizes the device tree with that from 5.6.7.
This also adds nodes for crypto and ddrc, which makes keeping
the device tree files from individual boards in sync with the
Linux kernel. This is helpful when boads reference those nodes.
Signed-off-by: Adam Ford
diff --git a/arch
On Mon, Apr 27, 2020 at 2:06 AM Marek Vasut wrote:
>
> On 4/27/20 4:26 AM, Adam Ford wrote:
>
> Hi,
>
> [...]
>
> >>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> >>> index 59a2713cb2..249d446f69 100644
> >>> ---
On Wed, Mar 25, 2020 at 11:47 AM Marek Vasut wrote:
>
> Perform DM conversion of the SMC911x driver.
>
> Note that the DT compatible is set only for 9115 , so this might need
> to be changed.
>
> Marek Vasut (13):
> net: smc911x: Remove pkt_data_{push,pull}
> net: smc911x: Replace malloc()+mem
On Mon, Apr 27, 2020 at 9:39 AM Marek Vasut wrote:
>
> On 4/27/20 3:31 PM, Adam Ford wrote:
>
> [...]
>
> >>>>> +Get and Build the ARM Trusted firmware
> >>>>> +==
> >>>>> +Note: sr
xup functions to a total of nearly 30 lines of code.
For the whole series...
Tested-by: Adam Ford # imx6q_logic
>
> Michael Walle (9):
> phy: atheros: introduce debug read and write functions
> phy: atheros: move delay config to common function
> phy: atheros: ar8035: remove e
On Fri, Oct 25, 2019 at 10:20 PM Adam Ford wrote:
>
> On Fri, Oct 25, 2019 at 7:27 PM Michael Walle wrote:
> >
> > This series cleans up the Atheros PHY AR803x PHY driver and adds a
> > device tree binding for the most commonly used PHY settings like clock
> > out
On Sat, Oct 26, 2019 at 3:57 AM Michael Walle wrote:
>
> Hi Adam,
>
> Am 2019-10-26 05:28, schrieb Adam Ford:
> > On Fri, Oct 25, 2019 at 10:20 PM Adam Ford wrote:
> >>
> >> On Fri, Oct 25, 2019 at 7:27 PM Michael Walle
> >> wrote:
> >> >
aking use of it.
Not knowing exactly which patches to apply to see the Makefile changes
in question, I'm just doing a code review instead of the test.
>
> Cc: Adam Ford
[snip]
Acked-by: Adam Ford #da850evm
> Signed-off-by: Tom Rini
> ---
> configs/da850evm_defconfig
roper. This should save some code space in SPL.
Signed-off-by: Adam Ford
diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
index bc2c0a2c25..179a1782c6 100644
--- a/configs/da850evm_nand_defconfig
+++ b/configs/da850evm_nand_defconfig
@@ -9,12
I am doing some spot checks on the da850evm which boots from SPI. It
seems OK, however, when I run the mtdparts, I expect to see the
partition map of the SPI flash.
Unfortunately, I get the following error:
nor0: partition (SPL) size alignment incorrect
Currently, it's setup as follows:
CON
On Thu, Jun 11, 2020 at 9:09 PM Adam Ford wrote:
>
> On Thu, Jun 11, 2020 at 7:17 AM Tom Rini wrote:
> >
> > On Thu, Jun 11, 2020 at 05:38:15AM -0500, Adam Ford wrote:
> > > On Wed, Jun 10, 2020 at 3:17 PM Tom Rini wrote:
> > > >
> > > > Due t
On Thu, Jun 11, 2020 at 7:17 AM Tom Rini wrote:
>
> On Thu, Jun 11, 2020 at 05:38:15AM -0500, Adam Ford wrote:
> > On Wed, Jun 10, 2020 at 3:17 PM Tom Rini wrote:
> > >
> > > Due to how the Makefile logic is we currently get DM_SPI support in SPL
> > > enab
On Mon, Jun 15, 2020 at 9:53 AM Tero Kristo wrote:
>
> On 15/06/2020 17:48, Vignesh Raghavendra wrote:
> >
> >
> > On 15/06/20 11:49 am, Tero Kristo wrote:
> >> On 14/06/2020 16:49, Lokesh Vutla wrote:
> >>> Hi Tero,
> >>>
> >>> On 02/06/20 4:49 pm, Tero Kristo wrote:
> Hi,
>
> As t
I am trying to port U-Boot to a new product based on a Renesas RZ/G2M
(rcar-gen3). We're have this working with Renesas' version from
2018.09, but I am trying to integrate it with U-Boot 2020.07-rc4
What's happening is that it seems like all GPIO are failing to be
requested, so things like regula
repo found:
https://github.com/renesas-rz/renesas-u-boot-cip/tree/v2018.09/rzg2
Adam Ford (5):
ARM: renesas: Add basic R8A774A1 Support
ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1
clk: renesas: Add R8A774A1 clock tables
pinctrl: renesas: Add R8A774A1 PFC tables
mmc: renesas-sdhi: E
This sync's the clock tables with the official release from
Renesas' repo based on U-Boot 2018.09 and modified to build into
the latest version of U-Boot.
Signed-off-by: Adam Ford
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index e78817829b..284e2138b3 10
The renesas-shdi controller can drive the r8a774a1 and shares its
quirks with R8A7796. This patch adds the compatibilty flag, to
support the SDHI controller.
Signed-off-by: Adam Ford
diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c
index d6ea99d2ce..8b8e300caf 100644
--- a
In order to build boards based on the R8A774A1, there needs to
be a config option from which to enable other drivers and/or flags
for this SoC.
Signed-off-by: Adam Ford
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index c8f93c68bb..bfd513a361 100644
--- a
This patch imports the device tree and required bindings to permit
the device tree to build for the R8Z774A1 (RZ/G2M).
Signed-off-by: Adam Ford
diff --git a/arch/arm/dts/r8a774a1.dtsi b/arch/arm/dts/r8a774a1.dtsi
new file mode 100644
index 00..a603d94797
--- /dev/null
+++ b/arch/arm/dts
On Thu, Jun 18, 2020 at 4:00 PM Marek Vasut wrote:
>
> On 6/18/20 10:33 PM, Adam Ford wrote:
> > I am trying to port U-Boot to a new product based on a Renesas RZ/G2M
> > (rcar-gen3). We're have this working with Renesas' version from
> > 2018.09, but I am
On Thu, Jun 18, 2020 at 4:20 PM Adam Ford wrote:
>
> On Thu, Jun 18, 2020 at 4:00 PM Marek Vasut wrote:
> >
> > On 6/18/20 10:33 PM, Adam Ford wrote:
> > > I am trying to port U-Boot to a new product based on a Renesas RZ/G2M
> > > (rcar-gen3). We're hav
On Thu, Jun 18, 2020 at 4:33 PM Marek Vasut wrote:
>
> On 6/18/20 11:20 PM, Adam Ford wrote:
>
> Hi,
>
> [...]
>
> >> Can you provide 'dm tree' output ?
> >
> > => dm tree
&
On Thu, Jun 18, 2020 at 4:51 PM Marek Vasut wrote:
>
> On 6/18/20 11:14 PM, Adam Ford wrote:
> > Add R8A774A1 PFC tables based on Renesas' repo based on 2018.09.
>
> It seems linux/next uses the same file for 7796 and 774a1 , can we do
> the same for U-Boot ?
That lo
repo found:
https://github.com/renesas-rz/renesas-u-boot-cip/tree/v2018.09/rzg2
Adam Ford (5):
ARM: renesas: Add basic R8A774A1 Support
ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1
clk: renesas: Add R8A774A1 clock tables
pinctrl: renesas: Enable R8A774A1 PFC tables
mmc: renesas
The PFC tables for the R8A774A1 are already available, but they
not enabled.
This patch adds the Kconfig option and builds the corresponding file
when PINCTRL_PFC_R8A774A1 is enabled.
Signed-off-by: Adam Ford
---
V2: Use tables already build into pfc-r8a7796 instead of creating a new file
In order to build boards based on the R8A774A1, there needs to
be a config option from which to enable other drivers and/or flags
for this SoC.
Signed-off-by: Adam Ford
---
V2: No Change
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index c8f93c68bb
The renesas-shdi controller can drive the r8a774a1 and shares its
quirks with R8A7796. This patch adds the compatibilty flag, to
support the SDHI controller.
Signed-off-by: Adam Ford
---
V2: No Change
diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c
index d6ea99d2ce
This sync's the clock tables with the official release from
Renesas' repo based on U-Boot 2018.09 and modified to build into
the latest version of U-Boot.
Signed-off-by: Adam Ford
---
V2: No Change
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index
The Beacon EmbeddedWorks kit is based on the R8A774A1 SoC also
known as the RZ/G2M.
The kit consists of a SOM + Baseboard and supports microSD,
eMMC, Ethernet, a couple celular radios, two CAN interfaces,
Bluetooth and WiFi.
Signed-off-by: Adam Ford
---
V2: New to series
diff --git a/arch/arm
This patch imports the device tree and required bindings to permit
the device tree to build for the R8Z774A1 (RZ/G2M).
Signed-off-by: Adam Ford
---
V2: No Change
diff --git a/arch/arm/dts/r8a774a1.dtsi b/arch/arm/dts/r8a774a1.dtsi
new file mode 100644
index 00..a603d94797
--- /dev/null
201 - 300 of 1678 matches
Mail list logo
