On 2/7/24 12:30, Michal Simek wrote:
On 2/7/24 09:33, Venkatesh Yadav Abbarapu wrote:
Add missing prototype to fix the below sparse warning
warning: no previous prototype for 'spl_spi_get_uboot_offs'
[-Wmissing-prototypes]
Signed-off-by: Venkatesh Yadav Abbarapu
---
board/xilinx/zy
"khadas-vim3l_android"
CONFIG_ARCH_MESON=y
CONFIG_TEXT_BASE=0x0100
+CONFIG_SYS_MALLOC_LEN=0x0800
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000
---
base-commit: 076529725f16f07a5cb2d5feba25d62b5f5a5872
change-id: 20240209-vim3-avb-malloc-aa3de534d6a0
Best regards,
--
Mattijs Korpershoek
On 07/02/24 6:27 pm, Anwar, Md Danish wrote:
> On 2/7/2024 6:05 PM, Roger Quadros wrote:
>>
>>
>> On 07/02/2024 09:15, MD Danish Anwar wrote:
>>> Hi Roger
>>>
>>> On 06/02/24 7:11 pm, Roger Quadros wrote:
On 06/02/2024 07:31, MD Danish Anwar wrote:
>
>
> On 05/02/24 6:07
Hi Igor,
Thank you for the patch.
On mar., févr. 06, 2024 at 23:31, Igor Opaniuk
wrote:
> From: Igor Opaniuk
>
> Use existing str_avb_slot_error() function for obtaining
> verification fail reason details.
> Take into account device lock state for setting correct
> androidboot.verifiedbootsta
On 08/02/24 5:28 pm, Roger Quadros wrote:
>
>
> On 08/02/2024 07:19, MD Danish Anwar wrote:
>> Hi Sean,
>>
>> On 07/02/24 11:14 pm, Sean Anderson wrote:
>>> On 1/30/24 01:26, MD Danish Anwar wrote:
The fs-loader driver reads env storage_interface and uses it to load
firmware file int
This patch series adds initial support for Microchip SAMA7G54 Curiosity board.
Mihai Sain (4):
ARM: dts: at91: sama7g5: add flexcom 10 node
ARM: dts: at91: sama7g54_curiosity: Add initial device tree of the board
board: at91: sama7g54_curiosity: Add initial board support
configs: at91: sam
Add flexcom 10 node for usage on the SAMA7G54 Curiosity board.
Signed-off-by: Mihai Sain
---
arch/arm/dts/sama7g5.dtsi | 26 ++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi
index 746a5ba347..01e880aabe 100644
--- a/a
Add default configuration for nand-flash to boot the linux kernel.
Add default configuration for qspi-flash to boot the linux kernel.
Add default configuration for sdcard to boot the linux kernel.
Configs are synced with savedefconfig.
Signed-off-by: Mihai Sain
---
configs/sama7g54_curiosity_mmc
Add initial support for SAMA7G54 Curiosity board.
Hardware:
SoC: SAMA7G54D2G SiP 1000 MHz
DRAM: DDR3 256 MiB
PMIC: MCP16502
Debug: UART3
Flash: QSPI NOR 8 MiB, SLC NAND 512 MiB
M.2 slot for wireless
Mikrobus connectors x 2
SD-Card connectors x 1
USB 2.0 x 3
Signed-off-by: Mihai Sain
---
arch/ar
Add initial device tree of the SAMA7G54 Curiosity board.
Signed-off-by: Mihai Sain
---
arch/arm/dts/Makefile | 3 +
.../dts/at91-sama7g54_curiosity-u-boot.dtsi | 59 +
arch/arm/dts/at91-sama7g54_curiosity.dts | 246 ++
3 files changed, 308 in
From: Quentin Schulz
The expected length of the cpuid, as passed with cpuid_length,
determines the size of cpuid_str string. Therefore, care should be taken
to make sure nothing is accessing data out-of-bounds.
Instead of using hardcoded values, derive them from cpuid_length.
Cc: Quentin Schulz
From: Quentin Schulz
Most Rockchip boards who override misc_init_r do it only to call another
function and keep the rest unchanged. Therefore to allow for less
duplication, let's just add a weak function symbol that is called inside
misc_init_r.
Cc: Quentin Schulz
Reviewed-by: Kever Yang
Revie
This adds all the necessary bits for adding support for Theobroma's new
SBC.
JAGUAR is a Single-Board Computer (SBC) based around the rk3588 SoC and
is targeting Autonomous Mobile Robots (AMR).
It features:
* LPDDR4X (up to 16GB)
* 1Gbps Ethernet on RJ45 connector (KSZ9031 or KSZ9131)
* PCIe 3
From: Quentin Schulz
Only setup_iodomain() differs from the original misc_init_r from
Rockchip mach code, so let's use rockchip_early_misc_init_r instead of
reimplementing the whole misc_init_r from Rockchip.
Cc: Quentin Schulz
Reviewed-by: Kever Yang
Signed-off-by: Quentin Schulz
---
board/
From: Quentin Schulz
Compared to the original misc_init_r from Rockchip mach code,
setup_iodomain() is added and rockchip_setup_macaddr() is not called.
It is assumed adding rockchip_setup_macaddr() back is fine.
Let's use rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_
From: Quentin Schulz
Compared to the original misc_init_r from Rockchip mach code,
setup_iodomain() is added and rockchip_setup_macaddr() is not called.
It is assumed adding rockchip_setup_macaddr() back is fine.
Let's use rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_
From: Quentin Schulz
Only setup_iodomain() differs from the original misc_init_r from
Rockchip mach code, so let's use rockchip_early_misc_init_r instead of
reimplementing the whole misc_init_r from Rockchip.
Cc: Quentin Schulz
Reviewed-by: Kever Yang
Signed-off-by: Quentin Schulz
---
board/
From: Quentin Schulz
Only setup_iodomain() and setup_boottargets differ from the original
misc_init_r from Rockchip mach code, so let's use
rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_r from Rockchip.
Cc: Quentin Schulz
Reviewed-by: Kever Yang
Signed-off-by: Quenti
From: Quentin Schulz
Only setup_boottargets differs from the original misc_init_r from
Rockchip mach code, so let's use rockchip_early_misc_init_r instead of
reimplementing the whole misc_init_r from Rockchip.
Cc: Quentin Schulz
Reviewed-by: Kever Yang
Signed-off-by: Quentin Schulz
---
.../t
From: Quentin Schulz
The functions aren't used anywhere else than in board.c, therefore,
let's not expose them anymore at all.
This merges misc.c and board.c together and removes the functions from
the misc.h header file.
Cc: Quentin Schulz
Reviewed-by: Kever Yang
Signed-off-by: Quentin Schul
From: Quentin Schulz
There's only one user of rockchip_capsule_update_board_setup, which is
in board.c, and only one board defines it, so instead of having a header
only for one function symbol, let's just use a weak symbol instead.
Cc: Quentin Schulz
Reviewed-by: Kever Yang
Signed-off-by: Que
From: Quentin Schulz
Rockchip SoCs have some jtag/sdmmc autoswitching that simply doesn't
work really well.[00] The Linux kernel disables it for all SoCs[01], so
U-Boot needs to do the same in order to fix issues related to SD card on
RK3588. This autoswitching is enabled (by default) via the for
From: Quentin Schulz
It's one thing to have the register mapped via a well-defined struct but
it's another to be able to make use of it. For that to happen, one needs
to cast the physical address memory of the beginning of the register
address space with the struct. Since this cannot change, let'
From: Quentin Schulz
hardware.h is only defining macros which are "wrappers" around writel().
writel() is however not available in hardware.h, needs to be
included. This means in order to use the wrappers in hardware.h, one
also needs to include the header.
However, this cannot be done curren
From: Quentin Schulz
The different macros use writel which is defined in asm/io.h, so let's
include the header so users of hardware.h do not need to include
asm/io.h as well.
While at it, remove asm/io.h includes wherever
asm/arch-rockchip/hardware.h is included already.
Cc: Quentin Schulz
Rev
From: Quentin Schulz
Since commit 9e644284ab81 ("dm: core: Report bootph-pre-ram/sram node as
pre-reloc after relocation"), bootph-pre-ram doesn't make U-Boot proper
bind the device before relocation.
While this is usually not much of an issue, it is when there's a lookup
for devices by code run
From: Quentin Schulz
JAGUAR is a Single-Board Computer (SBC) based around the rk3588 SoC and
is targeting Autonomous Mobile Robots (AMR).
It features:
* LPDDR4X (up to 16GB)
* 1Gbps Ethernet on RJ45 connector (KSZ9031 or KSZ9131)
* PCIe 3.0 4-lane on M.2 M-key connector
* PCIe 2.1 1-lane on
From: Quentin Schulz
There are multiple Device Trees in U-Boot git repo for Puma, so let's
make the MAINTAINERS entry match them all.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
board/theobroma-systems/puma_rk3399/MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
dif
From: Quentin Schulz
This migrates the plaintext README in
board/theobroma-systems/puma_rk3399 to doc/board/theobroma-systems and
while doing so, update the instructions and rewrite it in rST.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
board/theobroma-systems/puma_rk3399/MAINTAINERS
From: Quentin Schulz
This migrates the plaintext README in
board/theobroma-systems/ringneck_px30 to doc/board/theobroma-systems and
while doing so, update the instructions and rewrite it in rST.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
board/theobroma-systems/ringneck_px30/MAINTAI
Hi Mattijs,
On Thu, Feb 8, 2024 at 3:12 PM Mattijs Korpershoek
wrote:
>
> Hi Igor,
>
> Thank you for the patch.
>
> On mar., févr. 06, 2024 at 23:31, Igor Opaniuk
> wrote:
>
> > From: Igor Opaniuk
> >
> > Add info about slot_suffix param for avb verify.
> >
> > Signed-off-by: Igor Opaniuk
> >
From: Quentin Schulz
The original link returns a custom 404, so let's point to a link that
works today instead.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
board/theobroma-systems/ringneck_px30/MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/theo
Hi Mattijs,
On Thu, Feb 8, 2024 at 3:00 PM Mattijs Korpershoek
wrote:
>
> Hi Igor,
>
> Thank you for the patch.
>
> On mar., févr. 06, 2024 at 23:31, Igor Opaniuk
> wrote:
>
> > From: Igor Opaniuk
> >
> > Introduce AVB_OPS_CHECK macro for checking AvbOps before using
> > it to avoid code dupli
The fs-loader driver reads env storage_interface and uses it to load
firmware file into memory using the medium set by env. Update the driver
to use env fw_storage_interface as this variable is only used to load
firmwares. This is to keep all variables used by fs-loader driver with
'fw_' prefix. Al
Hi everyone,
I'm currently planning a big overhaul of the current implementation of
AVB/AB in U-Boot during the 2024 year, which I have barely touched since
2019. I used to believe that it was stillborn, but looks like it's
being actively used
now by some SoC vendors and Google folks [1][2].
This
Hi Igor,
On ven., févr. 09, 2024 at 11:14, Igor Opaniuk wrote:
> Hi everyone,
>
> I'm currently planning a big overhaul of the current implementation of
> AVB/AB in U-Boot during the 2024 year, which I have barely touched since
> 2019. I used to believe that it was stillborn, but looks like it's
Hi Mathieu,
On Fri, Feb 9, 2024 at 5:05 AM Mathieu Othacehe wrote:
> No. I fused the board and with this series applied and the three HAFDBS
> commits reverted, I can boot just fine on that board.
Yes, this part I understood.
> Without reverting those commits, the SPL is working fine and u-boo
Hi,
Issue:
Linux kernel getting crash after loading kernel in VM system using RISCV
QEMU.
RootCause:
Memory corruption in uboot FDT memory while launching a VM system in RISCV
QEMU.
Fix:
In the board_f.c file the FDT memory region is reserved without FDT padding
bytes. uboot will add some params
Hello Fabio,
> Just wanted to make sure I understand: if someone programs the fuse to
> close the board,
> it will fail to boot U-Boot proper and this means that the board is
> bricked. Is this correct?
No. I fused the board and with this series applied and the three HAFDBS
commits reverted, I
CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x40
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
---
base-commit: a4650bf65e4b7d3ef04c90ba8031374428e4a682
change-id: 20240209-am64x_evm_r5_defconfig-malloc-simple-len-b1e36478e431
Best regards
Hello,
In this v2, I moved imx93_probe_mu to a dedicated header.
Thanks,
Mathieu
Changelog:
v2: Move imx93_probe_mu declaration to a header file
Link to the previous revision:
v1: https://lists.denx.de/pipermail/u-boot/2024-February/545528.html
Mathieu Othacehe (3):
imx93: Use a header for
Put imx9_probe_mu declaration in a new mu.h header file.
Signed-off-by: Mathieu Othacehe
---
arch/arm/include/asm/arch-imx9/mu.h | 13 +
board/freescale/imx93_evk/spl.c | 2 +-
board/phytec/phycore_imx93/spl.c| 2 +-
3 files changed, 15 insertions(+), 2 deletions(-)
create
Probing the MU is needed to prevent this error in the SPL:
ele dev is not initialized
Authenticate container hdr failed, return -19, resp 0x0
IND = INVALID
ele dev is not initialized
Error: release container failed, resp 0x0!
IND = INVALID
SPL: failed to boot from all boot devices
Signed-off-by
Enable AHAB support in the imx93_var_som configuration.
Signed-off-by: Mathieu Othacehe
---
configs/imx93_var_som_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/imx93_var_som_defconfig b/configs/imx93_var_som_defconfig
index cc0c5a79bc1..14922f2a3e2 100644
--- a/configs/im
Hello,
> Please put this prototype into a header file.
>
> Currently, it appears in 3 imx93 spl.c files.
Fixed in the v2 :)
Thanks,
Mathieu
Hi Frieder,
On Thu, Feb 8, 2024 at 1:59 PM Frieder Schrempf wrote:
> +Burn the flash.bin to SD card at an offset of 1 KiB:
> +
> +.. code-block:: bash
> +
> + $ dd if=flash.bin of=/dev/sd[x] bs=1K seek=1 conv=notrunc
I see that you used binman to create the flash.bin file.
You could simply u
ut\n");
return;
}
}
---
base-commit: a4650bf65e4b7d3ef04c90ba8031374428e4a682
change-id: 20240209-ringneck-stm32-rst-input-ca1cdfa67ff5
Best regards,
--
Quentin Schulz
On Fri, Feb 09, 2024 at 01:22:08PM +0530, Selvakumar Velandi wrote:
> Hi,
>
> Issue:
> Linux kernel getting crash after loading kernel in VM system using RISCV
> QEMU.
>
> RootCause:
> Memory corruption in uboot FDT memory while launching a VM system in RISCV
> QEMU.
>
> Fix:
> In the board_f.c
changes since commit a4650bf65e4b7d3ef04c90ba8031374428e4a682:
ti: keystone2: Move common Kconfig selections to under ARCH_KEYSTONE
(2024-02-08 14:42:56 -0500)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-dfu.git
tags/u-boot-dfu-20240209
for you to
Hi Johan,
On 2/9/24 14:07, Johan Jonker wrote:
[...]
From codingstyle.rst:
You should follow this ordering in U-Boot.
The common.h header (which is going away at some point) should always be first,
followed by other headers in order, then headers with directories, then local
files.
Within t
On 2/9/24 10:50, Quentin Schulz wrote:
> From: Quentin Schulz
>
> hardware.h is only defining macros which are "wrappers" around writel().
>
> writel() is however not available in hardware.h, needs to be
> included. This means in order to use the wrappers in hardware.h, one
> also needs to i
The FDT relocation is not disabled. I am adding the FDT PADDING bytes while
doing FDT reservation in the board_f file.
Also update the FDT length based on the new allocation, instead of blindly
increasing the size.
Currently the size is getting increased even for the relocation disabled
scenario al
On Fri, Feb 9, 2024 at 11:25 AM Mathieu Othacehe wrote:
> Once the board is closed you can only boot from signed images. If the
> signed image is not working (hanging during relocation for instance),
> then you can always boot from a new one. All the interfaces: SD-card,
> UART, USB are still usa
Rework the section about includes slightly. We should not be using
common.h anywhere, so remove that from examples and ask people to send
patches removing it when found. Doing this also means we need to reword
other parts of this section. Be clearer about using alphabetical
ordering.
Signed-off-by
This message isn't an error (there can be a watchdog subnode for example)
but it shouldn't be printed unless this driver is being debugged. Demote
it to a debug print.
Signed-off-by: Caleb Connolly
---
drivers/button/button-qcom-pmic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff
We should not use the reserved value 0x00 for the wake up type but
use 0x06 (Power Switch).
Correctly display wake-up type in smbios command.
Display SMBIOS type 1 field family in smbios command.
v2:
use wake-up type 0x02 as our default
Heinrich Schuchardt (2):
cmd: smbios: type 1 wak
We should not use the reserved value 0x00 for the wake up type but
use 0x02 (Unknown).
Signed-off-by: Heinrich Schuchardt
---
v2:
use wake-up type 'Unknown' as our default
add more SMBIOS wake-up type constants
---
include/smbios.h | 10 ++
lib/smbios.c | 1 +
2 file
Correct type 1 output
* render wake up time as string
* print family string
* remove duplicate serial number output
Signed-off-by: Heinrich Schuchardt
---
v2:
no change
---
cmd/smbios.c | 25 +++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/cmd/sm
On 02/02/2024 08:38, Sumit Garg wrote:
> On Tue, 30 Jan 2024 at 19:35, Caleb Connolly
> wrote:
>>
>> Drop the U-Boot specific dragonboard410c.dts in favour of the upstream
>> msm8916-sbc.dts. No additional changes are needed to this DTS for U-Boot
>> support.
>>
>> Taken from kernel tag v6.7
>
Hello Mattijs,
On Fri, Feb 9, 2024 at 11:30 AM Mattijs Korpershoek
wrote:
>
> Hi Igor,
>
> On ven., févr. 09, 2024 at 11:14, Igor Opaniuk wrote:
>
> > Hi everyone,
> >
> > I'm currently planning a big overhaul of the current implementation of
> > AVB/AB in U-Boot during the 2024 year, which I ha
On 2024-02-09 10:49, Quentin Schulz wrote:
From: Quentin Schulz
The expected length of the cpuid, as passed with cpuid_length,
determines the size of cpuid_str string. Therefore, care should be
taken
to make sure nothing is accessing data out-of-bounds.
Instead of using hardcoded values, der
On 2024-02-09 10:50, Quentin Schulz wrote:
From: Quentin Schulz
Compared to the original misc_init_r from Rockchip mach code,
setup_iodomain() is added and rockchip_setup_macaddr() is not called.
It is assumed adding rockchip_setup_macaddr() back is fine.
Let's use rockchip_early_misc_init_r i
On 2024-02-09 10:50, Quentin Schulz wrote:
From: Quentin Schulz
Compared to the original misc_init_r from Rockchip mach code,
setup_iodomain() is added and rockchip_setup_macaddr() is not called.
It is assumed adding rockchip_setup_macaddr() back is fine.
Let's use rockchip_early_misc_init_r i
On 2024-02-09 10:50, Quentin Schulz wrote:
From: Quentin Schulz
Only setup_iodomain() differs from the original misc_init_r from
Rockchip mach code, so let's use rockchip_early_misc_init_r instead of
reimplementing the whole misc_init_r from Rockchip.
Cc: Quentin Schulz
Reviewed-by: Kever Yan
Hello Quentin,
Please, see my comments below.
On 2024-02-09 10:50, Quentin Schulz wrote:
From: Quentin Schulz
The functions aren't used anywhere else than in board.c, therefore,
let's not expose them anymore at all.
This merges misc.c and board.c together and removes the functions from
the m
On 2024-02-09 10:50, Quentin Schulz wrote:
From: Quentin Schulz
There's only one user of rockchip_capsule_update_board_setup, which is
in board.c, and only one board defines it, so instead of having a
header
only for one function symbol, let's just use a weak symbol instead.
Cc: Quentin Schu
On Fri, Feb 09, 2024 at 04:51:15PM +0100, Heinrich Schuchardt wrote:
> We should not use the reserved value 0x00 for the wake up type but
> use 0x02 (Unknown).
>
> Signed-off-by: Heinrich Schuchardt
[snip]
> @@ -108,6 +108,16 @@ struct __packed smbios_type0 {
> char eos[SMBIOS_STRUCT_EOS_B
On Thu, Feb 8, 2024 at 8:08 AM Fabio Estevam wrote:
>
> Hi Jesse,
>
> On Tue, Feb 6, 2024 at 1:40 PM Jesse Taube wrote:
> >
> > Add support for booting the imxrt1050-evk from spi.
> > Add imximage config and the ability for SPL to boot from NOR.
> >
> > Signed-off-by: Jesse Taube
>
> This causes
On Fri, Feb 9, 2024 at 3:27 PM Jesse T wrote:
> These errors also happen on master.
There are no errors in master, otherwise they would not pass the CI build.
> I will submit a patch to fix these soon.
Just to clarify: on master we do get the following warnings (not errors):
arch/arm/dts/imxr
> Date: Fri, 09 Feb 2024 18:58:01 +0100
> From: Dragan Simic
>
> Hello Quentin,
>
> Please, see my comments below.
>
> On 2024-02-09 10:50, Quentin Schulz wrote:
> > From: Quentin Schulz
> >
> > The functions aren't used anywhere else than in board.c, therefore,
> > let's not expose them anym
On 2/9/24 19:12, Tom Rini wrote:
On Fri, Feb 09, 2024 at 04:51:15PM +0100, Heinrich Schuchardt wrote:
We should not use the reserved value 0x00 for the wake up type but
use 0x02 (Unknown).
Signed-off-by: Heinrich Schuchardt
[snip]
@@ -108,6 +108,16 @@ struct __packed smbios_type0 {
Hello Mark,
On 2024-02-09 19:36, Mark Kettenis wrote:
Date: Fri, 09 Feb 2024 18:58:01 +0100
From: Dragan Simic
Please, see my comments below.
On 2024-02-09 10:50, Quentin Schulz wrote:
> From: Quentin Schulz
>
> The functions aren't used anywhere else than in board.c, therefore,
> let's not e
On Fri, Feb 09, 2024 at 07:37:28PM +0100, Heinrich Schuchardt wrote:
> On 2/9/24 19:12, Tom Rini wrote:
> > On Fri, Feb 09, 2024 at 04:51:15PM +0100, Heinrich Schuchardt wrote:
> >
> > > We should not use the reserved value 0x00 for the wake up type but
> > > use 0x02 (Unknown).
> > >
> > > Signe
This is the first patch series for incoming major
improvements for AVB implementation, that include:
- Simplify and add more context for debug/error prints where it's needed.
- Move SPDX license identifiers to the first line, so it conforms
to license placement rule.
- Use mmc_switch_part() only
From: Igor Opaniuk
mmc_switch_part() is used for switching between hw partitions
on eMMC (boot0, boot1, user, rpmb).
There is no need to do that for SD card.
Reviewed-by: Mattijs Korpershoek
Signed-off-by: Igor Opaniuk
---
Changes in v2:
- Mattijs Korpershoek R-b tag applied
common/avb_veri
From: Igor Opaniuk
Move SPDX license identifiers to the first line, so it conforms
to license placement rule [1]:
Placement:
The SPDX license identifier in kernel files shall be added at the first
possible line in a file which can contain a comment. For the majority
of files this is the first l
From: Igor Opaniuk
Make error prints more verbose with additional context.
Also s/print/debug/g for prints, which might be relevant only
for debugging purposes.
Reviewed-by: Mattijs Korpershoek
Signed-off-by: Igor Opaniuk
---
Changes in v2:
- Mattijs Korpershoek R-b tag applied
common/avb_v
From: Igor Opaniuk
Simplify and add more context for prints where it's needed.
Signed-off-by: Igor Opaniuk
---
Changes in v2:
- Drop AVB_OPS_CHECK macro and leave previous check
cmd/avb.c | 123 +-
1 file changed, 75 insertions(+), 48 delet
From: Igor Opaniuk
Introduce str_avb_io_error() and str_avb_slot_error() functions,
that provide a pointer to AVB runtime error message.
Reviewed-by: Mattijs Korpershoek
Signed-off-by: Igor Opaniuk
---
Changes in v2:
- Mattijs Korpershoek R-b tag applied
common/avb_verify.c | 49 ++
From: Igor Opaniuk
Use existing str_avb_slot_error() function for obtaining
verification fail reason details.
Take into account device lock state for setting correct
androidboot.verifiedbootstate kernel cmdline parameter.
Reviewed-by: Mattijs Korpershoek
Signed-off-by: Igor Opaniuk
---
Change
From: Igor Opaniuk
Sync usage info with the one cmd/avb.c.
Signed-off-by: Igor Opaniuk
---
Changes in v2:
- Address Mattijs comment about usage info, sync with cmd/avb.c
doc/android/avb2.rst | 16 +++-
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/doc/android/avb
On 2024-02-09 20:20, Igor Opaniuk wrote:
From: Igor Opaniuk
mmc_switch_part() is used for switching between hw partitions
on eMMC (boot0, boot1, user, rpmb).
There is no need to do that for SD card.
Reviewed-by: Mattijs Korpershoek
Signed-off-by: Igor Opaniuk
Looking good to me.
Reviewed-
On Fri, Feb 09, 2024 at 07:45:10PM +0530, Selvakumar Velandi wrote:
> The FDT relocation is not disabled. I am adding the FDT PADDING bytes while
> doing FDT reservation in the board_f file.
> Also update the FDT length based on the new allocation, instead of blindly
> increasing the size.
> Curre
02-08 14:42:56 -0500)
>
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-dfu.git
> tags/u-boot-dfu-20240209
>
> for you to fetch changes up to 766f04a297e892d5106f7f7ac8b43c69bd8a6007:
>
> lib: sparse: Fix error checking f
> This is what I am concerned about: this hang causes the board to brick
> and can no
> longer be recovered since it has the fuse programmed to close the device,
> right?
Once the board is closed you can only boot from signed images. If the
signed image is not working (hanging during relocation
To prepare support for multiple register layouts pointers to register
tables where added to struct cpg_mssr_info. These pointers are suppose
to be filled in at probe time and no intended change in behavior was
intended.
However the new pointers where only filled in by some paths of the
driver impl
On Fri, Feb 9, 2024 at 1:05 PM Mathieu Othacehe wrote:
>
> Put imx9_probe_mu declaration in a new mu.h header file.
>
> Signed-off-by: Mathieu Othacehe
> ---
> arch/arm/include/asm/arch-imx9/mu.h | 13 +
> board/freescale/imx93_evk/spl.c | 2 +-
> board/phytec/phycore_imx93/spl.
On Tue, Jan 30, 2024 at 07:06:08AM -0600, Nishanth Menon wrote:
> Stop using the findfdt script and switch to setting the fdtfile from
> C code.
>
> While at this, replace findfdt in environment with a warning as it is
> no longer needed
>
> Reviewed-by: Jonathan Humphreys
> Reviewed-by: Roger
On 2/6/24 7:02 PM, Jonas Karlman wrote:
This series contains miscellaneous updates to defconfigs, syncs latest
device trees from linux, fixes an issue loading FIT from SD-card when
running SPL from eMMC and enables building a bootable SPI image on
RK3328 boards.
I am also adding myself as a revi
From: Chen-Yu Tsai
Hi folks,
This series enables ROCKCHIP_EFUSE and MISC_INIT_R by default for RK3328
and RK3399 so that the cpuid is read from the efuse and used to generate
a serial number and MAC addresses for all boards.
This stacks on top of the recent defconfig update series [1] from Jona
From: Chen-Yu Tsai
The rockchip-efuse driver supports the efuse found on RK3328. This
hardware block is part of the SoC and contains the CPUID, which can
be used to generate stable serial numbers and MAC addresses.
Enable the driver and reading cpuid by default for RK3328.
Signed-off-by: Chen-Y
From: Chen-Yu Tsai
The rockchip-efuse driver supports the efuse found on RK3399. This
hardware block is part of the SoC and contains the CPUID, which can
be used to generate stable serial numbers and MAC addresses.
Enable the driver and reading cpuid by default for RK3399.
Signed-off-by: Chen-Y
From: Chen-Yu Tsai
Regenerate RK3328 defconfigs after adding imply statements.
Signed-off-by: Chen-Yu Tsai
---
configs/evb-rk3328_defconfig | 2 --
configs/nanopi-r2c-plus-rk3328_defconfig | 2 --
configs/nanopi-r2c-rk3328_defconfig | 2 --
configs/nanopi-r2s-rk
From: Chen-Yu Tsai
Regenerate RK3399 defconfigs after adding imply statements.
Signed-off-by: Chen-Yu Tsai
---
configs/chromebook_bob_defconfig | 2 --
configs/chromebook_kevin_defconfig| 2 --
configs/firefly-rk3399_defconfig | 2 --
configs/nanopi-r4s-rk3399_defconf
Hello Shantur,
On 2024-02-08 15:17, Dragan Simic wrote:
On 2024-02-08 15:10, Shantur Rathore wrote:
On Thu, Feb 8, 2024 at 1:44 PM Dragan Simic
wrote:
On 2024-02-08 14:33, Marek Vasut wrote:
> On 2/8/24 12:30, Shantur Rathore wrote:
>> On Wed, Feb 7, 2024 at 1:07 PM Marek Vasut wrote:
>>> On
95 matches
Mail list logo
