Hello,
I was wondering if there is/are some standard way(s) to achieve a
multiple boot selection on u-boot startup.
Let's say I have a bunch of partitions:
1- /dev/mmcblk0p7 with Debian 11 Bullseye
2- /dev/mmcblk0p5 with Debian 10 Buster
All of these partitions have the /boot/uImage kernel i
Hi Marek
On 10/9/22 17:51, Marek Vasut wrote:
> Add new desc_per_cacheline property which lets a platform run RX descriptor
> cleanup after every power-of-2 - 1 received packets instead of every packet.
> This is useful on platforms where (axi_bus_width EQOS_AXI_WIDTH_n * DMA DSL
> inter-descripto
Hello Sughosh,
By the way, could you also add in your series a patch for
stm32mp157c-ev1-u-boot.dtsi with the same node (with sdmmc1 phandle).
This syncs the supports for these to boards.
Best regards,
Etienne
On Thu, 6 Oct 2022 at 11:07, Sughosh Ganu wrote:
>
> The FWU metadata structure is ac
On Fri, Oct 07, 2022 at 03:38:45PM +0200, Heinrich Schuchardt wrote:
> The CloseProtocol() boot service requires a handle as first argument.
> Passing the protocol interface is incorrect.
>
> CloseProtocol() only has an effect if called with a non-zero value for
> agent_handle. HandleProtocol() us
On Sat, Oct 08, 2022 at 09:14:41AM +0200, Heinrich Schuchardt wrote:
> Allow avoiding using EFI_CALL() when closing a protocol by providing an
> internal function.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> include/efi_loader.h | 9 ++--
> lib/efi_loader/efi_boottime.c | 90 +++
On Sat, Oct 08, 2022 at 09:14:42AM +0200, Heinrich Schuchardt wrote:
> Avoid EFI_CALL() by using efi_close_protocol().
>
> Signed-off-by: Heinrich Schuchardt
> ---
> lib/efi_driver/efi_uclass.c | 25 +++--
> 1 file changed, 11 insertions(+), 14 deletions(-)
>
> diff --git a/
On Sat, Oct 08, 2022 at 09:13:00AM +0200, Heinrich Schuchardt wrote:
> * Replace the OpenProtocol() call by efi_search_protocol().
> * Remove the CloseProtocol() call.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> lib/efi_loader/efi_load_options.c | 13 -
> 1 file changed, 4 inserti
On Sat, Oct 08, 2022 at 09:09:54AM +0200, Heinrich Schuchardt wrote:
> Make it clearer why InstallMultipleProtocolInterfaces is invoked with two
> NULLs:
>
> * rename guid to esp_guid
> * put protocol GUIDs and the related interfaces on same lines
> * add comment
>
> Signed-off-by: Heinrich Schuc
s. These consist of:
* boot partitions (2), general purpose partitions (4) in MMC v4.4.
*/
+#define MMC_PART_USERDATA 0
#define MMC_NUM_BOOT_PARTITION 2
#define MMC_PART_RPMB 3 /* RPMB partition number */
---
base-commit: f5717231abad983b4d8f87db612ae60dec86cb1b
change-id: 20221010-switch-hwpart-7fed7746db59
Best regards,
--
Mattijs Korpershoek
Hi Gianluca,
On 10/10/22 09:06, gianluca wrote:
Hello,
I was wondering if there is/are some standard way(s) to achieve a
multiple boot selection on u-boot startup.
Let's say I have a bunch of partitions:
1- /dev/mmcblk0p7 with Debian 11 Bullseye
2- /dev/mmcblk0p5 with Debian 10 Buster
All
On Fri, Oct 7, 2022 at 8:11 PM Michael Nazzareno Trimarchi
wrote:
>
> Hi
>
> On Fri, Oct 7, 2022 at 4:36 PM Fabio Estevam wrote:
> >
> > Since commit 8d38a8459b0d ("mtd: Rename free() to rfree()")
> > the function has been renamed to rfree(), so update the description
> > inside the mtd_oob_regio
On 10/10/22 10:06, Quentin Schulz wrote:
Hi Gianluca,
On 10/10/22 09:06, gianluca wrote:
Hello,
I was wondering if there is/are some standard way(s) to achieve a
multiple boot selection on u-boot startup.
Let's say I have a bunch of partitions:
1- /dev/mmcblk0p7 with Debian 11 Bullseye
2-
The PWR regulators don't need be removed as they are already deactivated.
This patches is a alignment with the accepted patch in Linux device tree
in commit a34b42f8690c ("ARM: dts: stm32: fix pwr regulators references
to use scmi").
Fixes: 69ef98b209e7 ("ARM: dts: stm32mp15: alignment with v5.19"
On 10/01/2022 04.13, Simon Glass wrote:
> This behaviour is necessary with boards where the binman description
> requires processing external blobs, since these may be missing.
>
> Enable it by default, so that CI is happy. Warnings indicate that a valid
> image is not produced, as with the --allo
+Dario
On 29/09/2022 13:11, Roger Quadros wrote:
> OMAP3 BeagleBoard NAND boot hangs when spl_load_legacy_img() tries
> to read the header into 'struct hdr' which is allocated on the
> stack.
>
> As the header has already been read once before by spl_nand.c,
> we can avoid the extra header read h
Adding support to symlink an image packaged using binman.
Signed-off-by: Neha Malcom Francis
---
tools/binman/image.py | 6 ++
1 file changed, 6 insertions(+)
diff --git a/tools/binman/image.py b/tools/binman/image.py
index afc4b4d643..191d121d88 100644
--- a/tools/binman/image.py
+++ b/too
On Sun, 9 Oct 2022 12:32:02 -0400
Tom Rini wrote:
> On Sun, Oct 09, 2022 at 03:10:45PM +0200, Pali Rohár wrote:
> > On Sunday 09 October 2022 08:45:03 Tom Rini wrote:
> > > On Sun, Oct 09, 2022 at 02:41:19PM +0200, Pali Rohár wrote:
> > > > On Friday 26 August 2022 10:53:58 Tom Rini wrote:
On Fri, Oct 07, 2022 at 12:33:33AM +0200, Heinrich Schuchardt wrote:
> Dear Tom,
>
> The following changes since commit 2afa989fbecf25ea23902a9c480f179ba608785a:
>
> Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
> (2022-10-06 08:44:23 -0400)
>
> are available in the Git reposi
On Sun, Oct 09, 2022 at 05:03:52PM +0200, Dario Binacchi wrote:
> Hi Tom,
>
> The following changes since commit f5717231abad983b4d8f87db612ae60dec86cb1b:
>
> Merge branch '2022-10-07-riscv-toolchain-update' (2022-10-07 11:25:05
> -0400)
>
> are available in the Git repository at:
>
> http
On Thu, 6 Oct 2022 20:09:11 +0200
Michael Nazzareno Trimarchi wrote:
> [External email]
>
>
>
>
>
> Hi Mikhail
>
> On Thu, Oct 6, 2022 at 6:17 PM Mikhail Kshevetskiy
> wrote:
> >
> > On Thu, 6 Oct 2022 18:03:17 +0200
> > Michael Nazzareno Trimarchi wrote:
> >
> > > [External email]
> > >
On Sun, Oct 09, 2022 at 09:37:13PM +0200, Pali Rohár wrote:
> For some unknown reason GNU assembler version 2.31.1 (arm-linux-gnueabi-as
> from Debian Buster) cannot compile following code from located in file
> board/nokia/rx51/lowlevel_init.S:
>
> kernoffs:
> .word KERNEL_OFFSET - (. - C
On Sun, Oct 09, 2022 at 09:12:25PM +0200, Pali Rohár wrote:
> Hello! Watchdog code seems to be broken in u-boot master branch.
> On Nokia N900 I'm getting following message in qemu:
>
> cyclic function rx51_watchdog took too long: 1us vs 1000us max, disabling
>
> Seems that watchdog core cod
On 15/07/2022 14.40, ZHIZHIKIN Andrey wrote:
> Hello Gaurav,
>
> In the new v2022.07, I've stumbled upon the issue with calculating the SHA256
> of
> memory blocks with CAAM hashing. This causes the FIT image not to pass the
> hash
> validation, and also `sha256` command not operable.
>
> I'm a
Hi Rasmus,
On Mon, Oct 10, 2022 at 11:07 AM Rasmus Villemoes
wrote:
> This is still broken in v2022.10. Are there any plans to fix this?
If I recall correctly the fix for this issue is to sync imx8m dts
files with Linux so that the following
commit can be in place:
https://git.kernel.org/pub/sc
On Mon, Oct 10, 2022 at 12:15:58PM +0200, Rasmus Villemoes wrote:
> On 10/01/2022 04.13, Simon Glass wrote:
> > This behaviour is necessary with boards where the binman description
> > requires processing external blobs, since these may be missing.
> >
> > Enable it by default, so that CI is happy
Hi Alistair,
Thank you for your patch.
On lun., sept. 26, 2022 at 22:02, Alistair Delva wrote:
> From: Jiyong Park
>
> Previously Android AVB supported block devices only on eMMC. This change
> eliminates the restriction by using the generic block driver model.
>
> The `avb init' command is mo
While it is possible and documented on how to re-run buildman to replace
faked required binary files after the fact, this behavior ends up being
more confusing than helpful in practice. Switch to requiring
BINMAN_ALLOW_MISSING=1 to be passed on the 'make' line to enable this
behavior.
Cc: Rasmus V
Add a new flag to buildman so that we will in turn pass
BINMAN_ALLOW_MISSING=1 to 'make'. Make use of this flag in CI.
Cc: Rasmus Villemoes
Cc: Simon Glass
Signed-off-by: Tom Rini
---
.azure-pipelines.yml| 2 +-
.gitlab-ci.yml | 6 +++---
tools/buildman/builder.py
Hi Rasmus,
On Mon, 10 Oct 2022 at 04:16, Rasmus Villemoes
wrote:
>
> On 10/01/2022 04.13, Simon Glass wrote:
> > This behaviour is necessary with boards where the binman description
> > requires processing external blobs, since these may be missing.
> >
> > Enable it by default, so that CI is hap
On Mon, Oct 10, 2022 at 09:19:39AM -0600, Simon Glass wrote:
> Hi Rasmus,
>
> On Mon, 10 Oct 2022 at 04:16, Rasmus Villemoes
> wrote:
> >
> > On 10/01/2022 04.13, Simon Glass wrote:
> > > This behaviour is necessary with boards where the binman description
> > > requires processing external blobs
Hi Tom,
On Mon, 10 Oct 2022 at 09:24, Tom Rini wrote:
>
> On Mon, Oct 10, 2022 at 09:19:39AM -0600, Simon Glass wrote:
> > Hi Rasmus,
> >
> > On Mon, 10 Oct 2022 at 04:16, Rasmus Villemoes
> > wrote:
> > >
> > > On 10/01/2022 04.13, Simon Glass wrote:
> > > > This behaviour is necessary with boa
On Mon, Oct 10, 2022 at 09:33:59AM -0600, Simon Glass wrote:
> Hi Tom,
>
> On Mon, 10 Oct 2022 at 09:24, Tom Rini wrote:
> >
> > On Mon, Oct 10, 2022 at 09:19:39AM -0600, Simon Glass wrote:
> > > Hi Rasmus,
> > >
> > > On Mon, 10 Oct 2022 at 04:16, Rasmus Villemoes
> > > wrote:
> > > >
> > > > O
sc);
> +
> if (blks != blks_size) {
> pr_err("failed erasing from device %d\n", dev_desc->devnum);
> fastboot_fail("failed erasing from device", response);
> diff --git a/include/mmc.h b/include/mmc.h
> index 027e8bcc73a6..cdd457a60a5b 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -362,6 +362,7 @@ enum mmc_voltage {
> /* The number of MMC physical partitions. These consist of:
> * boot partitions (2), general purpose partitions (4) in MMC v4.4.
> */
> +#define MMC_PART_USERDATA0
> #define MMC_NUM_BOOT_PARTITION 2
> #define MMC_PART_RPMB 3 /* RPMB partition number */
>
>
> ---
> base-commit: f5717231abad983b4d8f87db612ae60dec86cb1b
> change-id: 20221010-switch-hwpart-7fed7746db59
>
> Best regards,
>
On 9/23/22 3:03 AM, Kautuk Consul wrote:
> We factor out the arch-independent parts of the ARM semihosting
> implementation as a common library so that it can be shared
> with RISC-V.
>
> Signed-off-by: Kautuk Consul
> ---
> arch/arm/Kconfig | 46 -
> arch/arm/lib/semihosti
Hi Tom,
On Mon, 10 Oct 2022 at 09:36, Tom Rini wrote:
>
> On Mon, Oct 10, 2022 at 09:33:59AM -0600, Simon Glass wrote:
> > Hi Tom,
> >
> > On Mon, 10 Oct 2022 at 09:24, Tom Rini wrote:
> > >
> > > On Mon, Oct 10, 2022 at 09:19:39AM -0600, Simon Glass wrote:
> > > > Hi Rasmus,
> > > >
> > > > On
On 9/23/22 3:03 AM, Kautuk Consul wrote:
> We add RISC-V semihosting based serial console for JTAG based early
> debugging.
>
> The RISC-V semihosting specification is available at:
> https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc
>
> Signed-off-by: Anup
On 10/7/22 11:38, Mattijs Korpershoek wrote:
When host issues "fastboot reboot fastboot", it's expected that the
board drops the USB connection before resetting.
On some boards, such as Khadas VIM3L and SEI610, this is not the case.
We observe the following error:
$ fastboot reboot fastboot
Reb
On 10/7/22 11:38, Mattijs Korpershoek wrote:
On some g12a boards like the VIM3L and the SEI610, with some
USB cables/hosts, there is a long (5s) delay before
between "fastboot reboot" and the host detecting a USB reset.
This breaks tools relying on "fastboot reboot fastboot" which assume
that 1s
The following changes since commit 73e741b8ee46eba4e02a3bcc758dbd70540ed3c1:
Merge tag 'u-boot-nand-20221009' of
https://source.denx.de/u-boot/custodians/u-boot-nand-flash (2022-10-10
08:17:08 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-efi
On Monday 10 October 2022 09:54:02 Tom Rini wrote:
> On Sun, Oct 09, 2022 at 09:37:13PM +0200, Pali Rohár wrote:
>
> > For some unknown reason GNU assembler version 2.31.1 (arm-linux-gnueabi-as
> > from Debian Buster) cannot compile following code from located in file
> > board/nokia/rx51/lowlevel
On Monday 10 October 2022 09:55:12 Tom Rini wrote:
> On Sun, Oct 09, 2022 at 09:12:25PM +0200, Pali Rohár wrote:
>
> > Hello! Watchdog code seems to be broken in u-boot master branch.
> > On Nokia N900 I'm getting following message in qemu:
> >
> > cyclic function rx51_watchdog took too long: 100
On Mon, Oct 10, 2022 at 06:18:08PM +0200, Pali Rohár wrote:
> On Monday 10 October 2022 09:54:02 Tom Rini wrote:
> > On Sun, Oct 09, 2022 at 09:37:13PM +0200, Pali Rohár wrote:
> >
> > > For some unknown reason GNU assembler version 2.31.1 (arm-linux-gnueabi-as
> > > from Debian Buster) cannot com
Hi,
On 10/10/2022 18:09, Marek Vasut wrote:
On 10/7/22 11:38, Mattijs Korpershoek wrote:
On some g12a boards like the VIM3L and the SEI610, with some
USB cables/hosts, there is a long (5s) delay before
between "fastboot reboot" and the host detecting a USB reset.
This breaks tools relying on "
On Sun, Oct 09, 2022 at 09:12:25PM +0200, Pali Rohár wrote:
> Hello! Watchdog code seems to be broken in u-boot master branch.
> On Nokia N900 I'm getting following message in qemu:
>
> cyclic function rx51_watchdog took too long: 1us vs 1000us max, disabling
>
> Seems that watchdog core code
On Tue, Oct 4, 2022 at 6:22 PM Simon Glass wrote:
>
> Until recently it has not been possible to add any U-Boot-specific
> properties to the device tree schema. Now that it is somewhat separated
> from Linux and people are feeling the enormous pain of the bifurcated
> schema, it seems like a good
If a DM_MDIO driver is used we need to scan the subnodes as well.
Signed-off-by: Tim Harvey
Signed-off-by: Vladimir Oltean
Reviewed-by: Ramon Fried
Reviewed-by: Fabio Estevam
---
v6:
- no changes
v5:
- added Fabio's rb tag
v4:
- no changes
v3:
- no changes
v2:
- added Ramon's rb tag
---
This series adds a DSA driver for the MV88E6xxx based on
drivers/net/phy/mv88e61xx and uses it in the gwventana_gw5904_defconfig.
The hope is that the other three boards that use the MV88E61xx driver
can move to this as well eventually so that we can remove the non-dm
driver and the 4 Kconfig opti
In order to ensure that a DSA driver probe gets called before
dsa_ops->port_probe move the port_probe of the cpu_port to
a post-probe function.
Signed-off-by: Tim Harvey
Reviewed-by: Ramon Fried
Reviewed-by: Vladimir Oltean
Reviewed-by: Fabio Estevam
---
v6:
- removed unnecessary semicolon
v5
Add a function to sanity check a dsa driver having proper ops.
Suggested-by: Vladimir Oltean
Signed-off-by: Tim Harvey
Reviewed-by: Vladimir Oltean
Reviewed-by: Fabio Estevam
---
v6:
- no changes
v5:
- added Fabio's rb tag
v4:
- no changes
v3:
- added Vladimir's rb tag
v2: new patch
---
n
Remove the unnecessary xmit and recv functions.
Signed-off-by: Tim Harvey
Reviewed-by: Vladimir Oltean
Reviewed-by: Fabio Estevam
---
v6:
- no changes
v5:
- added Fabio's rb tag
v4:
- no changes
v3:
- added Vladimir's rb tag
v2: new patch
---
drivers/net/ksz9477.c | 23
Allow rcv() and xmit() dsa driver ops to be optional in case a driver
does not care to mangle a packet as in U-Boot only one network port is
enabled at a time and thus no packet mangling is necessary.
Suggested-by: Vladimir Oltean
Signed-off-by: Tim Harvey
Reviewed-by: Vladimir Oltean
Reviewed-
Add support for DM_MDIO by registering a UCLASS_MDIO driver and
attempting to use it. This is necessary if wanting to use a DSA
driver for example hanging off of the FEC MAC.
Care is taken to fallback to non DM_MDIO mii bus as several boards define
DM_MDIO without having the proper device-tree con
Add MV88E6XXX DSA support:
- update dt to provide internal MDIO bus and port handles.
U-Boot requires a more restrictive subset of the dt bindings
required by Linux for the sake of simplifying code
- update defconfig to remove old driver and enable new one
- replace mv88e61xx_hw_reset weak
Add a DSA driver for the MV88E6xxx compatible Ethernet switches.
Cc: Marek Behún
Cc: Vladimir Oltean
Signed-off-by: Tim Harvey
Reviewed-by: Vladimir Oltean
Reviewed-by: Fabio Estevam
---
v6:
- update commit msg (s/MV88E61xx/MV88E6xxx)
- remove GbE from commit msg and Kconfig desc
- squash
On Mon, Oct 10, 2022 at 11:34:00AM -0500, Rob Herring wrote:
> On Tue, Oct 4, 2022 at 6:22 PM Simon Glass wrote:
> >
> > Until recently it has not been possible to add any U-Boot-specific
> > properties to the device tree schema. Now that it is somewhat separated
> > from Linux and people are feel
Hi,
when running QEMU and specifying both a firmware binary (--bios) and
a kernel (-kernel) on the command line, QEMU will run the firmware, but
will also record information about the provided kernel in the QEMU
firmware device. U-Boot's "qfw" command can load the kernel to a
provided address then
At the moment the QEMU firmware command just prints the size of the
loaded binaries on the console.
To go with all the other load methods, and many boot scripts'
expectations, also store the size of the file loaded last in the
environment variable "filesize".
We first put the kernel size in there,
When we try to load a kernel via the QEMU firmware device, we currently
"return -1;" if no kernel was specified on the QEMU command line. This
leads to the usage output, which is confusing (since nothing on the
command line was really wrong), but also somewhat hides the actual error
message.
Retur
At the moment the QEMU boot sequence tries various (storage) devices
when trying to find a payload to boot.
To simplify starting a specific kernel and initrd, there is also the qfw
command, which can use the files specified on the QEMU command line, via
the -kernel and -initrd options.
Add this com
On Mon, Oct 10, 2022 at 11:34:00AM -0500, Rob Herring wrote:
> On Tue, Oct 4, 2022 at 6:22 PM Simon Glass wrote:
> >
> > Until recently it has not been possible to add any U-Boot-specific
> > properties to the device tree schema. Now that it is somewhat separated
> > from Linux and people are feel
On 10/10/22 18:22, Neil Armstrong wrote:
Hi,
Hi,
On 10/10/2022 18:09, Marek Vasut wrote:
On 10/7/22 11:38, Mattijs Korpershoek wrote:
On some g12a boards like the VIM3L and the SEI610, with some
USB cables/hosts, there is a long (5s) delay before
between "fastboot reboot" and the host detec
On Monday 10 October 2022 12:21:56 Tom Rini wrote:
> On Mon, Oct 10, 2022 at 06:18:08PM +0200, Pali Rohár wrote:
> > On Monday 10 October 2022 09:54:02 Tom Rini wrote:
> > > On Sun, Oct 09, 2022 at 09:37:13PM +0200, Pali Rohár wrote:
> > >
> > > > For some unknown reason GNU assembler version 2.31
On Monday 10 October 2022 12:28:18 Tom Rini wrote:
> On Sun, Oct 09, 2022 at 09:12:25PM +0200, Pali Rohár wrote:
> > Hello! Watchdog code seems to be broken in u-boot master branch.
> > On Nokia N900 I'm getting following message in qemu:
> >
> > cyclic function rx51_watchdog took too long: 1u
On Mon, Oct 10, 2022 at 07:22:56PM +0200, Pali Rohár wrote:
> On Monday 10 October 2022 12:28:18 Tom Rini wrote:
> > On Sun, Oct 09, 2022 at 09:12:25PM +0200, Pali Rohár wrote:
> > > Hello! Watchdog code seems to be broken in u-boot master branch.
> > > On Nokia N900 I'm getting following message i
On Monday 10 October 2022 13:40:38 Tom Rini wrote:
> On Mon, Oct 10, 2022 at 07:22:56PM +0200, Pali Rohár wrote:
> > On Monday 10 October 2022 12:28:18 Tom Rini wrote:
> > > On Sun, Oct 09, 2022 at 09:12:25PM +0200, Pali Rohár wrote:
> > > > Hello! Watchdog code seems to be broken in u-boot master
On Mon, Oct 10, 2022 at 07:44:05PM +0200, Pali Rohár wrote:
> On Monday 10 October 2022 13:40:38 Tom Rini wrote:
> > On Mon, Oct 10, 2022 at 07:22:56PM +0200, Pali Rohár wrote:
> > > On Monday 10 October 2022 12:28:18 Tom Rini wrote:
> > > > On Sun, Oct 09, 2022 at 09:12:25PM +0200, Pali Rohár wrot
On Monday 10 October 2022 13:56:10 Tom Rini wrote:
> On Mon, Oct 10, 2022 at 07:44:05PM +0200, Pali Rohár wrote:
> > On Monday 10 October 2022 13:40:38 Tom Rini wrote:
> > > On Mon, Oct 10, 2022 at 07:22:56PM +0200, Pali Rohár wrote:
> > > > On Monday 10 October 2022 12:28:18 Tom Rini wrote:
> > >
On Mon, Oct 10, 2022 at 08:01:23PM +0200, Pali Rohár wrote:
> On Monday 10 October 2022 13:56:10 Tom Rini wrote:
> > On Mon, Oct 10, 2022 at 07:44:05PM +0200, Pali Rohár wrote:
> > > On Monday 10 October 2022 13:40:38 Tom Rini wrote:
> > > > On Mon, Oct 10, 2022 at 07:22:56PM +0200, Pali Rohár wrot
Without this the early sysreset code cannot be tested.
Signed-off-by: Michal Suchanek
---
v2: use u-boot,dm-pre-proper rather than u-boot,dm-pre-reloc - sandbox
SPL cannot build otherwise
---
arch/sandbox/dts/sandbox.dtsi | 1 +
arch/sandbox/dts/test.dts | 2 ++
2 files changed, 3 insert
Boards can have multiple sysresets, iterate all when printing sysreset
info.
Fixes: 23471aed5c ("board_f: Add reset status printing")
Signed-off-by: Michal Suchanek
---
v2:
- do not use errno_str
- rename flag variable
---
common/board_f.c | 29 ++---
1 file changed, 1
The following changes since commit 73e741b8ee46eba4e02a3bcc758dbd70540ed3c1:
Merge tag 'u-boot-nand-20221009' of
https://source.denx.de/u-boot/custodians/u-boot-nand-flash (2022-10-10
08:17:08 -0400)
are available in the Git repository at:
git://source.denx.de/u-boot-usb.git master
for
On Mon, Oct 10, 2022 at 02:14:25PM -0400, Tom Rini wrote:
> On Mon, Oct 10, 2022 at 08:01:23PM +0200, Pali Rohár wrote:
> > On Monday 10 October 2022 13:56:10 Tom Rini wrote:
> > > On Mon, Oct 10, 2022 at 07:44:05PM +0200, Pali Rohár wrote:
> > > > On Monday 10 October 2022 13:40:38 Tom Rini wrote:
On Monday 10 October 2022 15:24:13 Tom Rini wrote:
> On Mon, Oct 10, 2022 at 02:14:25PM -0400, Tom Rini wrote:
> > On Mon, Oct 10, 2022 at 08:01:23PM +0200, Pali Rohár wrote:
> > > On Monday 10 October 2022 13:56:10 Tom Rini wrote:
> > > > On Mon, Oct 10, 2022 at 07:44:05PM +0200, Pali Rohár wrote:
On Mon, Oct 10, 2022 at 06:13:24PM +0200, Heinrich Schuchardt wrote:
> The following changes since commit 73e741b8ee46eba4e02a3bcc758dbd70540ed3c1:
>
> Merge tag 'u-boot-nand-20221009' of
> https://source.denx.de/u-boot/custodians/u-boot-nand-flash (2022-10-10
> 08:17:08 -0400)
>
> are availab
On Sun, Oct 02, 2022 at 07:10:40PM -0600, Simon Glass wrote:
> Hi Michal,
>
> On Sun, 2 Oct 2022 at 13:34, Michal Suchánek wrote:
> >
> > On Thu, Sep 29, 2022 at 04:00:26AM -0600, Simon Glass wrote:
> > > Hi Michal,
> > >
> > > On Sun, 25 Sept 2022 at 02:28, Michal Suchanek wrote:
> > > >
> > >
Missing blobs should cause the build (with make) to fail, but at present
success is returned. This is because binman currently produces an exit
code of 0 in this case.
Of course this is not correct, since the images cannot actually be used.
This series fixes that and adjusts buildman to deal sens
This is needed for some soon-to-be-applied patches. Scan the configs/
directory to see if any of the files match.
Signed-off-by: Simon Glass
Suggested-by: Tom Rini
---
tools/buildman/boards.py | 11 +++
1 file changed, 11 insertions(+)
diff --git a/tools/buildman/boards.py b/tools/bui
This is required for if_changed to work correctly. Add it.
Signed-off-by: Simon Glass
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 45f10759a13..2e8ae768c51 100644
--- a/Makefile
+++ b/Makefile
@@ -,7 +,7 @@ endef
PHONY += in
This is out-of-date now. Fix it.
Signed-off-by: Simon Glass
---
scripts/Kbuild.include | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 9c14310ad40..62e0207f91b 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.incl
Buildman should consider a build as a success (with warnings) if missing
blobs have been dealt with by binman, even though buildman itself returns
and error code overall. This is how other warnings are dealt with.
We cannot easily access the 103 exit code, so detect the problem in the
output.
Wit
At present binman returns success when told to handle missing blobs.
This is confusing this in fact the resulting image cannot work.
Use exit code 103 to signal this problem, with a -W option to convert
it to a warning.
Signed-off-by: Simon Glass
---
tools/binman/binman.rst | 4
tools/bin
On Monday 10 October 2022 14:00:29 Simon Glass wrote:
> This is required for if_changed to work correctly. Add it.
That is truth.
Reviewed-by: Pali Rohár
>
> Signed-off-by: Simon Glass
> ---
>
> Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Makefile b/Ma
All of the required values for using the omap_wdt.c driver are found in
and this is what is indirectly pulled in via
when it exists.
Signed-off-by: Tom Rini
---
drivers/watchdog/omap_wdt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/omap_wdt.c b/drivers
On Mon, Oct 10, 2022 at 02:00:28PM -0600, Simon Glass wrote:
> This is needed for some soon-to-be-applied patches. Scan the configs/
> directory to see if any of the files match.
>
> Signed-off-by: Simon Glass
> Suggested-by: Tom Rini
Putting this on my local branch with many defconfigs listed
On Mon, Oct 10, 2022 at 02:00:31PM -0600, Simon Glass wrote:
> At present binman returns success when told to handle missing blobs.
> This is confusing this in fact the resulting image cannot work.
>
> Use exit code 103 to signal this problem, with a -W option to convert
> it to a warning.
>
> S
Hi.
I am really sorry for the delay in answer.
Sadly, I am not able to send a v5 for the moment.
Indeed, I am still struggling with the same bug since a lot of time...
It happens in the Azure pipeline but also locally with test.py.
I am sure the bug is related to memory management as the setexp
On Mon, Oct 10, 2022 at 09:06:12PM +0200, Marek Vasut wrote:
> The following changes since commit 73e741b8ee46eba4e02a3bcc758dbd70540ed3c1:
>
> Merge tag 'u-boot-nand-20221009' of
> https://source.denx.de/u-boot/custodians/u-boot-nand-flash (2022-10-10
> 08:17:08 -0400)
>
> are available in th
Hello Simon,
My board boots well . When I added the second partition into my kernel I
got this message
*Verifying Checksum ... Bad Data CRC*
what could be the root cause ?
Which data is talking about ? u boot data or kernel data ?
Thanks in advance.
On Mon, Oct 10, 2022 at 09:49:20PM +0200, Michal Suchánek wrote:
> On Sun, Oct 02, 2022 at 07:10:40PM -0600, Simon Glass wrote:
> > Hi Michal,
> >
> > On Sun, 2 Oct 2022 at 13:34, Michal Suchánek wrote:
> > >
> > > On Thu, Sep 29, 2022 at 04:00:26AM -0600, Simon Glass wrote:
> > > > Hi Michal,
>
On Fri, 7 Oct 2022 at 17:28, Heinrich Schuchardt
wrote:
>
> We want tests to avoid the usage of sudo. Describe that virt-make-fs can
> generate disk images without being root.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> doc/develop/py_testing.rst | 19 +++
> 1 file changed, 19
On Fri, 7 Oct 2022 at 12:38, Heinrich Schuchardt
wrote:
>
> The cls command works fine on the serial console. There is no reason to
> let it depend on the availability of video.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> cmd/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
Reviewed-by: Simon
Hi Tim,
On Mon, 10 Oct 2022 at 10:40, Tim Harvey wrote:
>
> Allow rcv() and xmit() dsa driver ops to be optional in case a driver
> does not care to mangle a packet as in U-Boot only one network port is
> enabled at a time and thus no packet mangling is necessary.
>
> Suggested-by: Vladimir Oltea
Hi Tom,
On Mon, 10 Oct 2022 at 14:41, Tom Rini wrote:
>
> On Mon, Oct 10, 2022 at 02:00:31PM -0600, Simon Glass wrote:
>
> > At present binman returns success when told to handle missing blobs.
> > This is confusing this in fact the resulting image cannot work.
> >
> > Use exit code 103 to signal
Hi Michal,
On Mon, 10 Oct 2022 at 15:33, Michal Suchánek wrote:
>
> On Mon, Oct 10, 2022 at 09:49:20PM +0200, Michal Suchánek wrote:
> > On Sun, Oct 02, 2022 at 07:10:40PM -0600, Simon Glass wrote:
> > > Hi Michal,
> > >
> > > On Sun, 2 Oct 2022 at 13:34, Michal Suchánek wrote:
> > > >
> > > > O
Hi Momo,
On Mon, 10 Oct 2022 at 15:31, momo aubin wrote:
>
> Hello Simon,
>
> My board boots well . When I added the second partition into my kernel I got
> this message
> Verifying Checksum ... Bad Data CRC
> what could be the root cause ?
>
> Which data is talking about ? u boot data or kernel
Hi Tom,
On Mon, 10 Oct 2022 at 09:18, Tom Rini wrote:
>
> Add a new flag to buildman so that we will in turn pass
> BINMAN_ALLOW_MISSING=1 to 'make'. Make use of this flag in CI.
>
> Cc: Rasmus Villemoes
> Cc: Simon Glass
> Signed-off-by: Tom Rini
> ---
> .azure-pipelines.yml| 2 +
On Mon, 10 Oct 2022 at 12:30, Michal Suchanek wrote:
>
> Without this the early sysreset code cannot be tested.
>
> Signed-off-by: Michal Suchanek
> ---
> v2: use u-boot,dm-pre-proper rather than u-boot,dm-pre-reloc - sandbox
> SPL cannot build otherwise
> ---
> arch/sandbox/dts/sandbox.dtsi
On Mon, 10 Oct 2022 at 12:30, Michal Suchanek wrote:
>
> Boards can have multiple sysresets, iterate all when printing sysreset
> info.
>
> Fixes: 23471aed5c ("board_f: Add reset status printing")
> Signed-off-by: Michal Suchanek
> ---
>
> v2:
> - do not use errno_str
> - rename flag variable
>
Hi,
On Sun, 28 Aug 2022 at 09:19, Marek Behún wrote:
>
> From: Pali Rohár
>
> When U-Boot is running from flash memory (execute in place) then
> gd->fdt_blob before relocation points to read-only flash memory.
>
> So U-Boot calls board_fix_fdt() with read-only gd->fdt_blob pointer which
> cause
Hi Neha,
On Mon, 10 Oct 2022 at 05:07, Neha Malcom Francis wrote:
>
> Adding support to symlink an image packaged using binman.
>
> Signed-off-by: Neha Malcom Francis
> ---
> tools/binman/image.py | 6 ++
> 1 file changed, 6 insertions(+)
>
This looks fine as a feature, but please add a te
1 - 100 of 112 matches
Mail list logo
