On 26.04.19 15:46, Heinrich Schuchardt wrote:
>
> On 4/26/19 1:21 PM, Jan Kiszka wrote:
>> On 26.04.19 12:21, Grant Likely wrote:
>>> On 26/04/2019 10:49, Jan Kiszka wrote:
On 26.04.19 11:07, Francois Ozog wrote:
>>> [...]
> Here are the guiding principles of our efforts :
> 0) we wan
On 26.04.19 19:23, Heinrich Schuchardt wrote:
> In the UEFI context GUIDs are expected to be rendered in upper case.
>
> The patch uses the formerly unused bit 1 of the parameter str_format
> of function uuid_bin_to_str() to indicate if we need upper or lower case
> output.
>
> Function uuid_strin
This series is a rework of v5 patch that send it in separate series[1]
All these changes are creating an initial rk3399-u-boot.dtsi and rk3399
board -u-boot.dtsi files and u-boot specific dts changes like
- sdram dtsi
- sdmmc, u-boot,dm-pre-reloc
- spi1, u-boot,dm-pre-reloc
Changes for v6:
- spil
U-Boot always managed to use Linux devicetree files with respective
bindings, but on the other hand u-boot also has it's own u-boot
specific nodes or properties example u-boot,dm-pre-reloc which
is required for SPL_OF_CONTROL to allocate particular node.
It is always better to maintain these u-boo
Devicetree files in RK3399 platform is synced from Linux, like other
platforms does. Apart from these u-boot in rk3399 would also require
some u-boot specific node like dmc.
dmc node has big chunk of DDR timing parameters which are specific
to specific board, and maintained with rk3399-sdram*.dtsi
Now we have
- board specific -u-boot.dtsi files for board specific u-boot
dts changes.
- soc specific rk3399-u-boot.dtsi for soc specific u-boot
dts changes.
So, include the rk3399-u-boot-dtsi on respective board -u-boot.dtsi
and drop the properties which are globally available in rk3399-u-boo
This is v6 patchset for New rk3399 boards support wrt previous
version[1]
Overall this series add support below rk3399 boards
- Orangepi RK3399
- NanoPI M4
- NanoPC T4
- NanoPI NEO4
- Orangepi RK3399
- Rock PI 4
- Rockpro64
All the respective dts(i) files are synced from Linux 5.1-rc2 and few
dts
Add default SPL_FIT_GENERATOR py script for rockchip platforms if
specific target enabled SPL_LOAD_FIT.
So, this would help get rid of explicitly mentioning the default
SPL FIT generator in defconfigs. however some targets, like puma_rk3399
still require their own FIT generator so in those cases t
Sync rk3399-opp.dtsi from Linux.
Linux commit details about the rk3399-opp.dtsi sync:
"arm64: dts: rockchip: use SPDX-License-Identifier"
(sha1: 4ee99cebd486238ac433da823b95cc5f8d8a6905)
Signed-off-by: Jagan Teki
Reviewed-by: Paul Kocialkowski
---
arch/arm/dts/rk3399-opp.dtsi | 133 +++
Few SPL and U-Boot proper configs are common to all rk3399 target
defconfigs, move them and select it from platform kconfig.
Moved configs:
- SPL_ATF
- SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
- SPL_LOAD_FIT
- SPL_CLK if SPL
- SPL_PINCTRL if SPL
- SPL_RAM if SPL
- SPL_REGMAP if SPL
- SPL_SYSCO
To make successful build with dts(i) files syncing from Linux 5.1-rc2
the rk3399.dtsi would require pwm2_pin_pull_down.
So, sync the pwm2_pin_pull_down node from Linux 5.1-rc2. Since this
node is strictly not part of any commit alone, I have mentioned
Linux 5.1-rc2 tag for future reference of whe
Sync rk3399-nanopi4.dtsi from Linux 5.1-rc2 tag.
Linux commit details about the rk3399-nanopi4.dtsi sync:
"arm64: dts: rockchip: Add nanopi4 bluetooth"
(sha1: 3e2f0bb72be36aa6c14ee7f11ac4dd8014801030)
Signed-off-by: Jagan Teki
Reviewed-by: Paul Kocialkowski
---
arch/arm/dts/rk3399-nanopi4.dtsi
Add initial support for Orangepi RK3399 board.
Specification
- Rockchip RK3399
- 2GB/4GB DDR3
- 16GB eMMC
- SD card slot
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- Mini PCIe
- Sensors, Keys etc
- DC12V-2A and DC5V-2A
Commit details about Linux DTS sync:
"arm64: dts: rock
Add initial support for Nanopc T4 board.
Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- 16GB eMMC
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A
Commit details o
sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
indeed failed to detect the sdcard on the board with below error
Card did not respond to voltage select!
So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
is already defined in rk3399.dts so make use of same like
other boards
Add initial support for Nanopi M4 board.
Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- eMMC socket
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- USB 3.0 x4
- USB Type C power and data
- GPIO1, GPIO2 expansion ports
- DC5V/3A
Commit details
Add initial support for Nanopi NEO4 board.
Specification
- Rockchip RK3399
- 1GB DDR3-1866
- SD card slot
- eMMC Socket
- RTL8211E 1Gbps
- AP6212 WiFI/BT
- HDMI In/Out, DP, MIPI CSI
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 5V/3A
Commit details of rk3399-nanopi-neo4.d
Add initial support for Rockpro64 board.
Specification
- Rockchip RK3399
- 2/4GB Dual-Channel LPDDR3
- SD card slot
- eMMC socket
- 128Mb SPI Flash
- Gigabit ethernet
- PCIe 4X slot
- WiFI/BT module socket
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expan
Add initial support for Rock PI 4 board.
Specification
- Rockchip RK3399
- LPDDR4
- eMMC
- SD card slot
- RTL8211E 1Gbps
- HDMI In/Out, DP, MIPI DSI/CSI
- PCIe M.2
- USB 2.0, USB-3.0
- USB C Type
Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: add ROCK Pi 4
Add Cadence PCIe endpoint driver supporting configuration
of header, bars and MSI for device.
Signed-off-by: Ramon Fried
---
Changes in v3: None
.../pci_endpoint/cdns,cdns-pcie-ep.txt| 18 +
drivers/pci_endpoint/Kconfig | 8 +
drivers/pci_endpoint/Makefile
> >> I've done porting linux's pkcs7/x509 parsers and they work well
> >> with my UEFI secure boot patch, but I'm still looking for other options
> >> as well.
> >>
> >> * openssl
> >> Most of existing components linked to UEFI secure boot, including
> >> EDK2, shim and grub, reply on this lib
Since rockchip have an individual doc/README.rockchip, it would
be better to update the same instead of maintaining it separately
in board files.
So, add the documentation for rk3399
- procedure to build for Rockchip miniloader and
U-Boot SPL options
- procedure to boot from SD for Rockchip mini
Introduce new UCLASS_PCI_EP class for handling PCI endpoint
devices, allowing to set various attributes of the PCI endpoint
device, such as:
* configuration space header
* BAR definitions
* outband memory mapping
* start/stop PCI link
Signed-off-by: Ramon Fried
---
Changes in v3: None
MAINTAI
Add basic PCI endpoint sandbox testing.
Signed-off-by: Ramon Fried
---
Changes in v3:
- Added more testing of sandbox driver
arch/sandbox/include/asm/test.h | 8 +
test/dm/Makefile| 1 +
test/dm/pci_ep.c| 64 +
3 files chang
This patchset adds support for new uclass, UCLASS_PCI_EP
allowing new set of PCI endpoint drivers.
Included in the patch is also a driver for Cadence PCIe endpoint.
Changes in V2:
- Removed "pci.h: add missing maskbit" as it was already merged
by Simon.
- Added PCI endpoint sandbox driver
- Add
Add a dummy PCI endpoint for sandbox.
Supporting only a single function, it allows setting
and reading header configuration.
Signed-off-by: Ramon Fried
---
Changes in v3:
- Added more description to commit message and kmsg
- Removed some unused functionality that can't be
tested.
- Removed en
pá 26. 4. 2019 v 7:11 odesílatel Philip Balister
napsal:
> On 04/25/2019 05:33 PM, Michal Simek wrote:
> > On 17. 04. 19 19:46, Philip Balister wrote:
> >> Signed-off-by: Philip Balister
> >> ---
> >> configs/zynq_minized_defconfig | 16 +---
> >> 1 file changed, 5 insertions(+), 11
pá 26. 4. 2019 v 6:59 odesílatel Philip Balister
napsal:
> On 04/25/2019 05:30 PM, Michal Simek wrote:
> > On 17. 04. 19 19:46, Philip Balister wrote:
> >> Signed-off-by: Philip Balister
> >> ---
> >> include/configs/zynq_minized.h | 54 ++
> >> 1 file changed, 5
pá 26. 4. 2019 v 6:18 odesílatel Philip Balister
napsal:
> On 04/25/2019 05:28 PM, Michal Simek wrote:
> > On 17. 04. 19 19:46, Philip Balister wrote:
> >> Signed-off-by: Philip Balister
> >> ---
> >> arch/arm/dts/zynq-minized.dts | 1 +
> >> 1 file changed, 1 insertion(+)
> >>
> >> diff --git
On Fri, Apr 26, 2019 at 06:12:40AM +, Chee, Tien Fong wrote:
> On Mon, 2019-04-22 at 13:29 -0400, Tom Rini wrote:
> > On Wed, Feb 13, 2019 at 08:32:24PM +0800, tien.fong.c...@intel.com
> > wrote:
> >
> > >
> > > From: Tien Fong Chee
> > >
> > > This would print out all the FPGA node names s
On Wed, Apr 10, 2019 at 02:13:12PM +0200, Hannes Schmelzer wrote:
> Signed-off-by: Hannes Schmelzer
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de
On Wed, Apr 10, 2019 at 02:13:13PM +0200, Hannes Schmelzer wrote:
> Many B&R boards are equipped with an I2C-EEPROM where various
> information can be stored.
>
> Today there is only a single byte for 'board_id' used.
>
> We write this 'board_id' into environment for later use during boot.
>
>
On Wed, Apr 10, 2019 at 02:13:11PM +0200, Hannes Schmelzer wrote:
> Today the BuR common stuff is only used on AM33XX boards. In future we
> plan to have many other platforms than AM33XX so we have to move arch-
> specific #include(s) to responsible #ifdef sections. By the way we drop
> unneeded #
On Wed, Apr 10, 2019 at 02:13:14PM +0200, Hannes Schmelzer wrote:
> On many B&R boards we have a reset-controller, responsible for very
> early board-bringup (voltages, clocks, ...) and bootmode selection.
>
> To be ready for adding more B&R boards to source tree while avoiding
> duplicate code,
On Wed, Apr 10, 2019 at 02:13:15PM +0200, Hannes Schmelzer wrote:
> - fixup coding style
> - drop unused 'PUSH_KEY' define
>
> Signed-off-by: Hannes Schmelzer
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-
On Wed, Apr 10, 2019 at 02:13:16PM +0200, Hannes Schmelzer wrote:
> The handling of regarding bootmode and early setup has been moved to
> central location 'common/br_resetc.c', so use this on brxre1 board.
>
> Signed-off-by: Hannes Schmelzer
Applied to u-boot/master, thanks!
--
Tom
signatu
On Wed, Apr 10, 2019 at 06:59:26PM +0200, Heinrich Schuchardt wrote:
> %g/rathen then/rather than/
>
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing list
U-B
On Fri, Apr 12, 2019 at 12:54:43PM -0400, Andrew F. Davis wrote:
> TI-SCI message protocol provides support for controlling the firewall
> configurations available in SoC.
>
> Introduce support for the set of TI-SCI message protocol APIs that
> provide us with this capability of controlling firew
On Thu, Apr 11, 2019 at 12:58:49AM +0200, Pierre Bourdon wrote:
> Fixes building mkimage on systems where OpenSSL header files do not
> live in the standard include path.
>
> Signed-off-by: Pierre Bourdon
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Apr 12, 2019 at 12:54:44PM -0400, Andrew F. Davis wrote:
> SYSFW version 2019.01 introduces a slightly modified version of this API,
> add support for it here.
>
> Signed-off-by: Andrew F. Davis
> Reviewed-by: Tom Rini
> Reviewed-by: Andreas Dannenberg
Applied to u-boot/master, thanks
On Fri, Apr 12, 2019 at 12:54:48PM -0400, Andrew F. Davis wrote:
> Signed-off-by: Andrew F. Davis
> Reviewed-by: Tom Rini
> Reviewed-by: Andreas Dannenberg
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Bo
On Tue, Apr 16, 2019 at 01:31:57PM +0200, Heiko Schocher wrote:
> - at91sam9g20-taurus.dts: use labels
> - cleanup taurus port to compile clean with
> current mainline again. SPL has no serial
> output anymore, so it fits into SRAM.
>
> Signed-off-by: Heiko Schocher
This needs to be reworke
On Fri, Apr 12, 2019 at 12:54:47PM -0400, Andrew F. Davis wrote:
> Add new defconfig files for the AM65x High Security EVM.
>
> This defconfigs are the same as for the non-secure part, except for:
> CONFIG_TI_SECURE_DEVICE option set to 'y'
> CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y
On Fri, Apr 12, 2019 at 12:54:42PM -0400, Andrew F. Davis wrote:
> On HS devices the 512b region of reset isolated memory called
> MCU_PSRAM0 is firewalled by default. Until SYSFW is loaded we
> cannot use this memory. It is only used to store a single value
> left at the end of SRAM by ROM that w
On Tue, Apr 16, 2019 at 02:47:14AM +0200, Pierre Bourdon wrote:
> btrfs_search_tree should return the first item in the tree that is
> greater or equal to the searched item.
>
> The search algorithm did not properly handle the edge case where the
> searched item is higher than the last item of th
On Thu, Apr 11, 2019 at 11:13:13AM +0200, Patrice Chotard wrote:
> The objective is to provide a simple way to retrieve a BMP file,
> and display it as splashscreen, from extlinux.conf file input.
>
> For this, we take example on https://www.syslinux.org/wiki/
> index.php?title=Menu#The_advanced_
On Sat, Apr 13, 2019 at 11:50:49PM +0200, Pierre Bourdon wrote:
> ROOT_ITEMs in btrfs are referenced without knowing their actual "offset"
> value. To perform these searches using only two items from the key, the
> btrfs driver uses a special "btrfs_search_tree_key_type" function.
>
> The algorit
On Thu, Apr 18, 2019 at 10:46:58AM +0300, Baruch Siach wrote:
> The generated flash.log file that mach-imx uses for MKIMAGEOUTPUT is not
> covered by any other ignore pattern. Ignore all *.log files.
>
> Signed-off-by: Baruch Siach
> Reviewed-by: Fabio Estevam
Applied to u-boot/master, thanks!
On Fri, Apr 12, 2019 at 12:37:03PM +0200, Heiko Schocher wrote:
> adding a new bootstage ID:
> BOOTSTAGE_ID_ENTER_CLI_LOOP
>
> Signed-off-by: Heiko Schocher
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Bo
On Fri, Apr 12, 2019 at 12:54:46PM -0400, Andrew F. Davis wrote:
> K3 HS devices require signed binaries for boot, use the SECDEV tools
> to sign the boot artifacts during build.
>
> Signed-off-by: Andrew F. Davis
> Reviewed-by: Tom Rini
> Reviewed-by: Andreas Dannenberg
Applied to u-boot/mas
On Wed, Apr 17, 2019 at 01:24:33PM -0500, Adam Ford wrote:
> The da850evm include environment/ti/mmc.h and places
> DEFAULT_MMC_TI_ARGS, defined int that file, in
> CONFIG_EXTRA_ENV_SETTINGS. This has been broken for some time
> since neither CMD_PART nor CMD_UUID are available, so manually
> cha
On Wed, Apr 17, 2019 at 11:21:56AM -0500, Adam Ford wrote:
> A previous patch converted a bunch of settings for CONFIG_SF_DEFAULT
> but it broke the SPI Flash which now prevents booting. This patch
> now correctly sets CONFIG_SF_DEFAULT_SPEED=3000 to match what it
> was before the conversion.
On Wed, Apr 17, 2019 at 04:56:54PM +0200, Björn Stenberg wrote:
> addr0 is being freed twice, leading to segmentation fault
>
> Signed-off-by: Björn Stenberg
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-B
On Thu, Apr 18, 2019 at 05:16:21PM +0200, Patrick Delaunay wrote:
> The sysreset of 'POWER' type is a PMIC reset defined as
> 'remove and restore power'.
> So normally only COLD/WARN is supported by sysreset_syscon.
>
> This modification allows to use the function sysreset_walk(SYSRESET_POWER)
>
On Wed, Apr 17, 2019 at 11:41:42AM +0200, Gregory CLEMENT wrote:
> Since the introduction of the driver, some memory in IRAM is reserved for
> the TX buffers.
>
> However there are not used but instead of it, it is the buffer provided
> by the net stack which is used. As stated in the comment of
On Fri, Apr 26, 2019 at 11:31:09AM +0200, Marek Vasut wrote:
> The following changes since commit 3fbd2dce351ab5d40d3244f26bd713caa4f826e2:
>
> Merge branch '2019-04-22-master-imports' (2019-04-24 09:04:23 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-socfp
On Tue, Apr 09, 2019 at 03:38:14PM +0200, Igor Opaniuk wrote:
> AVB 2.0 spec. revision 1.1 introduces support for named persistent values
> that must be tamper evident and allows AVB to store arbitrary key-value
> pairs [1].
>
> Introduce implementation of two additional AVB operations
> read_per
On Fri, Apr 12, 2019 at 12:54:45PM -0400, Andrew F. Davis wrote:
> K3 devices have High Security (HS) variants along with the non-HS already
> supported. Like the previous generation devices (OMAP/Keystone2) K3
> supports boot chain-of-trust by authenticating and optionally decrypting
> images as
On Wed, Apr 17, 2019 at 11:48:45AM +0200, Gregory CLEMENT wrote:
> The match controller register is not cleared during
> initialization. However, some bits of this register may reset the TC if
> tnMRx match it.
>
> As we can't make any assumption about how U-Boot is launched by the first
> stage
On Sat, Apr 27, 2019 at 04:50:18PM +0200, Pierre Bourdon wrote:
> Hi Tom,
>
> On Sat, Apr 27, 2019 at 4:46 PM Tom Rini wrote:
> > On Sat, Apr 13, 2019 at 11:50:49PM +0200, Pierre Bourdon wrote:
> > > ROOT_ITEMs in btrfs are referenced without knowing their actual "offset"
> > > value. To perform
On Sun, Apr 21, 2019 at 11:54:37PM +0200, Heinrich Schuchardt wrote:
> Add the device trees for
>
> * vexpress_ca5x2_defconfig
> * vexpress_ca9x4_defconfig
> * vexpress_ca15_tc2_defconfig
>
> as available in Linux 5.1 rc5.
>
> We are using the vexpress_ca15_tc2_defconfig and vexpress_ca9x4_defc
Hi Tom,
On Sat, Apr 27, 2019 at 4:46 PM Tom Rini wrote:
> On Sat, Apr 13, 2019 at 11:50:49PM +0200, Pierre Bourdon wrote:
> > ROOT_ITEMs in btrfs are referenced without knowing their actual "offset"
> > value. To perform these searches using only two items from the key, the
> > btrfs driver uses
On Mon, Apr 15, 2019 at 11:19:15AM +, Ismael Luceno Cortes wrote:
> Signed-off-by: Ismael Luceno
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.d
On Fri, Apr 26, 2019 at 12:58:33PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following Marvell and watchdog related patches:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing list
On Wed, Apr 17, 2019 at 11:22:05AM +0200, Gregory CLEMENT wrote:
> The purpose of "mtd: nand: raw: allow to disable unneeded ECC layouts"
> was to allow disabling the default ECC layouts if a driver is known to
> provide its own ECC layout. However, this commit did the opposite and
> disabled the
On Tue, Apr 16, 2019 at 01:31:58PM +0200, Heiko Schocher wrote:
> generate define for an alias only if the struct is not
> created already.
>
> This prevents compilerwarning:
> PLATspl/dts/dt-platdata.o
> spl/dts/dt-platdata.c:11:46: error: missing braces around initializer
> [-Werror=miss
On Thu, Apr 18, 2019 at 08:00:48AM -0400, Robert P. J. Day wrote:
> As far back as 2011, "_armboot_start" was being described as "no
> longer defined":
>
> commit 297f18ac0fbeef30ba1c17fe131ca75f09a6e7cf
> Author: Greg Ungerer
> Date: Fri Sep 9 22:23:34 2011 +1000
>
>CM4000: fix broken
On Fri, 26 Apr 2019 23:54:58 +0200
Eugeniu Rosca wrote:
> The random uuid values (enabled via CONFIG_RANDOM_UUID=y) on our
> platform are always the same. Below is consistent on each cold boot:
>
> => ### reach U-Boot prompt
> => setenv uuid_gpt_misc
> => gpt verify mmc 1 $partitions
>
Hi Jagan,
On Sun, 21 Apr 2019 22:42:45 +0530
Jagan Teki wrote:
> On Tue, Feb 5, 2019 at 4:24 PM Emmanuel Vadot wrote:
> >
> > Other make_fit script (like imx or sunxi) use the BL31 environment
> > variable to indicate the location of the file.
> > Also do that for rockchip so we don't need to
On Fri, Apr 26, 2019 at 2:53 PM Weijie Gao wrote:
>
> This patch adds spi-mem driver for MediaTek MT7629 SoC to access SPI-NOR
> and SPI-NAND flashes.
>
> Cc: Jagan Teki
> Signed-off-by: Weijie Gao
> ---
> drivers/spi/Kconfig | 9 ++
> drivers/spi/Makefile | 1 +
> drivers/spi/mtk_
Hi Tom,
Please pull this PR.
Summary:
- H6 Beelink GS1 board (Clément)
- Olimex A64-Teres-I board (Jonas)
- sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
- _relaxed MMIO (Andre)
- EPHY clock changes(Jagan)
The following changes since commit 1f4ae66eaab29bfb5d1eb44996f7826c9cd01ed1:
Merge t
On 19.03.19 09:50, tien.fong.c...@intel.com wrote:
From: Tien Fong Chee
Ensure the watchdog is reset timely on each status polling.
I would have expected a longer commit message here explaining why this
is done, and from where, where to, and why the watchdog reset has been
moved.
Anyway
On 19.03.19 09:50, tien.fong.c...@intel.com wrote:
From: Tien Fong Chee
Increasing Malloc pool size up to 0x15000 is required to support FAT in SPL
. The result of calculation is come from after applying some few patches
"Some few patches"? What should that mean? Either you refer to the
curr
On 19.03.19 09:50, tien.fong.c...@intel.com wrote:
From: Tien Fong Chee
Add FPGA driver to support program FPGA with FPGA bitstream loading from
filesystem. The driver are designed based on generic firmware loader
framework. The driver can handle FPGA program operation from loading FPGA
bitst
On 22.04.19 23:00, Tom Rini wrote:
On Mon, Apr 22, 2019 at 11:50:22PM +0300, Vladimir Zapolskiy wrote:
Hi Jagan, Tom,
On 04/19/2019 09:48 AM, Jagan Teki wrote:
Dropped
- lpc32xx_ssp driver
- CONFIG_LPC32XX_SSP, LPC32XX_SSP_TIMEOUT items
Dropped due to:
- no active updates
- no dm conversion
On 25.04.19 21:22, Simon Goldschmidt wrote:
This fixes SPL linker script size checks for 3 lds files where the size
checks were implemented as "x < YYY_MAX_SIZE".
Fix the size checks to be "x <= YYY_MAX_SIZE" instead.
After updating Ubuntu to 19.04 today, the new 8.3 gcc makes
smartweb_defc
On Sat, Apr 27, 2019 at 09:47:21PM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> Summary:
> - H6 Beelink GS1 board (Clément)
> - Olimex A64-Teres-I board (Jonas)
> - sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
> - _relaxed MMIO (Andre)
NAK, this MMIO change (and readl/writ
Hello, I've attempted to build u-boot v2019.04 for the DE10 Nano board using
the following commands:
make ARCH=arm CROSS_COMPILE=${CC} distclean
make ARCH=arm CROSS_COMPILE=${CC} socfpga_de10_nano_defconfig
make ARCH=arm CROSS_COMPILE=${CC} u-boot-with-spl.sfp
It builds just fine but I'm not able
On Sat, 2019-04-27 at 21:38 +0530, Jagan Teki wrote:
> On Fri, Apr 26, 2019 at 2:53 PM Weijie Gao wrote:
> >
> > This patch adds spi-mem driver for MediaTek MT7629 SoC to access SPI-NOR
> > and SPI-NAND flashes.
> >
> > Cc: Jagan Teki
> > Signed-off-by: Weijie Gao
> > ---
> > drivers/spi/Kconfi
Updating the bcm283x device tree sources adds the device trees for
- Raspberry Pi 3 Model A+
- Raspberry Pi 3 Model B+
- Raspberry Pi Compute Module IO board rev1
- Raspberry Pi Compute Module 3 IO board V3.0
- Raspberry Pi Zero
Add a defconfig file for the Raspberry Pi 3 Model B+.
Heinrich Schu
Updating the bcm283x device tree sources adds the device trees for
- Raspberry Pi 3 Model A+
- Raspberry Pi 3 Model B+
- Raspberry Pi Compute Module IO board rev1
- Raspberry Pi Compute Module 3 IO board V3.0
- Raspberry Pi Zero
Signed-off-by: Heinrich Schuchardt
---
arch/arm/dts/Makefile
Provide a defconfig file for the Raspberry Pi 3 Model B+. It is based on
the Raspberry Pi 3 file, just changing the device tree.
Signed-off-by: Heinrich Schuchardt
---
configs/rpi_3_b_plus_defconfig | 43 ++
1 file changed, 43 insertions(+)
create mode 100644 con
> Am 28.04.2019 um 06:46 schrieb Heinrich Schuchardt :
>
> Updating the bcm283x device tree sources adds the device trees for
>
> - Raspberry Pi 3 Model A+
> - Raspberry Pi 3 Model B+
> - Raspberry Pi Compute Module IO board rev1
> - Raspberry Pi Compute Module 3 IO board V3.0
> - Raspberry Pi Z
83 matches
Mail list logo
