On 12/27/18 7:16 AM, Ooi, Joyce wrote:
>> -Original Message-
>> From: Marek Vasut [mailto:ma...@denx.de]
>> Sent: Thursday, December 27, 2018 2:55 AM
>> To: Ooi, Joyce ; Joe Hershberger
>>
>> Cc: See, Chin Liang ; Ong, Hean Loong
>> ; Priyanka Jain ; u-
>> b...@lists.denx.de
>> Subject: Re
Hi Tom,
This is my current patch queue for efi against v2019.01. Please pull.
Alex
The following changes since commit 1f2e948d6d53f77a2ddb2dde3531b0d5bc2815ad:
Prepare v2019.01-rc2 (2018-12-17 20:25:24 -0500)
are available in the git repository at:
git://github.com/agraf/u-boot.git tags
Enable related configs to support sata DM feature.
Signed-off-by: Peng Ma
---
configs/lx2160ardb_tfa_SECURE_BOOT_defconfig |4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
inde
Enable related configs to support sata DM feature.
Signed-off-by: Peng Ma
---
Depends on:
- https://patchwork.ozlabs.org/patch/1013298/
configs/lx2160ardb_tfa_SECURE_BOOT_defconfig |4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/configs/lx2160ardb_tfa_SECURE_
On Thu, Dec 27, 2018 at 4:35 AM Tom Rini wrote:
>
> On Tue, Dec 18, 2018 at 10:49:03PM +0200, Ramon Fried wrote:
>
> > Some architectures (MIPS) needs mapping to access IOMEM.
> > Fix that.
> >
> > Fixes: f1dcc19b213d ("net: macb: Convert to driver model")
> >
> > Signed-off-by: Ramon Fried
> > R
Kever,
> On 27.12.2018, at 02:07, Kever Yang wrote:
>
> System will get size '0' in 32bit system if the size is 4GB
> for the address is 32bit only, return the max space available
> instead of actual DDR size in rockchip_sdram_size().
>
> Signed-off-by: Kever Yang
Reviewed-by: Philipp Tomsich
Hi Daniel!
Thank you for the input. I am about to have a new v2 ready.
Comments below.
---Lars
> -Original Message-
> From: Daniel Schwierzeck
> Sent: Thursday, December 20, 2018 21:53
> To: Lars Povlsen - M31675 ; u-
> b...@lists.denx.de
> Cc: gregory.clem...@bootlin.com; Horatiu Vult
Hi Christoph,
I once submitted a series of patches that they can support all Socs'
Pinctrl and how do you feel about using them.
http://patchwork.ozlabs.org/patch/868849/
在 2018/12/27 上午9:11, Kever Yang 写道:
Add David to review the pinctrl driver.
Thanks,
- Kever
On 12/17/2018 09:30 PM, Chr
This patch series add the GPIO device (SIO) in the MSCC VCoreIII-based
SOCs, and enables it on the supported platforms.
By using a serial interface, the SIO controller significantly extends
the number of available GPIOs with a minimum number of additional pins
on the device. The primary purpose of
From: Lars Povlsen
This add device tree binding documentation for the MSCC serial GPIO
driver.
Signed-off-by: Lars Povlsen
---
doc/device-tree-bindings/gpio/mscc_sgpio.txt | 45
1 file changed, 45 insertions(+)
create mode 100644 doc/device-tree-bindings/gpio/mscc_sgpio.t
This add support for the the MSCC serial GPIO driver in MSCC
VCoreIII-based SOCs.
By using a serial interface, the SIO controller significantly extends
the number of available GPIOs with a minimum number of additional pins
on the device. The primary purpose of the SIO controller is to connect
cont
From: Lars Povlsen
This enables the use of the MSCC serial GPIO driver, and add gpio-leds
nodes to the 'luton' pcb090 and pcb091 DT.
Signed-off-by: Lars Povlsen
---
arch/mips/dts/luton_pcb090.dts | 21 +
arch/mips/dts/luton_pcb091.dts | 27 +++
arch/
This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'luton' SoC.
Signed-off-by: Lars Povlsen
---
board/mscc/luton/luton.c | 6 ++
configs/mscc_luton_defconfig | 3 +++
2 files changed, 9 insertions(+)
diff --git a/board/mscc/luton/luton.c b/board
From: Lars Povlsen
This enables the use of the MSCC serial GPIO driver on the MSCC
VCoreIII 'ocelot' SOC, and add gpio-leds nodes to the pcb123 and
pcb120 DT.
Signed-off-by: Lars Povlsen
---
arch/mips/dts/mscc,ocelot.dtsi | 23 ++
arch/mips/dts/ocelot_pcb120.dts | 76 +
This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120.
Signed-off-by: Lars Povlsen
---
board/mscc/ocelot/ocelot.c| 6 ++
configs/mscc_ocelot_defconfig | 3 +++
2 files changed, 9 insertions(+)
diff --git a/board/mscc/ocel
Hi David,
On 12/27/18 1:49 PM, David Wu wrote:
> Hi Christoph,
>
> I once submitted a series of patches that they can support all Socs'
> Pinctrl and how do you feel about using them.
Thank's for pointing to that.
Your driver looks good, but I don't like the huge amount
of duplication in it (yo
Hi Tom,
On Wed, Dec 26, 2018 at 09:36:25AM -0500, Tom Rini wrote:
> On Thu, Dec 20, 2018 at 06:37:02PM +0530, Manivannan Sadhasivam wrote:
>
> > Add MMC nodes for HiKey board based on HI6220 SoC. There are two MMC
> > controllers in this SoC, first one used for eMMC and second one used
> > for SD
From: Manivannan Sadhasivam
Default 8MB gunzip size is not enough to load the release kernel, hence
fix 64MB size for uncompressing the kernel.
Signed-off-by: Manivannan Sadhasivam
Reviewed-by: Simon Glass
---
Changes in v2: Added Simon's Reviewed-by tag.
include/configs/hikey.h | 2 ++
1 f
From: Manivannan Sadhasivam
Convert HiSilicon HI6220 MMC driver based on DWMMC IP to driver
model.
Signed-off-by: Manivannan Sadhasivam
Reviewed-by: Simon Glass
---
Changes in v2: Added Simon's Reviewed-by tag.
configs/hikey_defconfig | 1 +
drivers/mmc/hi6220_dw_mmc.c | 100 +
From: Manivannan Sadhasivam
Add MMC nodes for HiKey board based on HI6220 SoC. There are three MMC
controllers in this SoC, first one used for eMMC, second one used
for SD card and third one is not used by u-boot.
Signed-off-by: Manivannan Sadhasivam
Reviewed-by: Simon Glass
---
Changes in v2
On Thu, Dec 27, 2018 at 07:04:05PM +0530, Manivannan Sadhasivam wrote:
> From: Manivannan Sadhasivam
>
> Add MMC nodes for HiKey board based on HI6220 SoC. There are three MMC
> controllers in this SoC, first one used for eMMC, second one used
> for SD card and third one is not used by u-boot.
>
On our mirror account on github we have gotten a handful of pull
requests. At this time github does not allow you to disable pull
requests on a project. The generally suggested work-around is to add a
pull request template that tells people to not use that workflow. Add
one here that points to t
David,
> On 27.12.2018, at 13:49, David Wu wrote:
>
> Hi Christoph,
>
> I once submitted a series of patches that they can support all Socs' Pinctrl
> and how do you feel about using them.
>
> http://patchwork.ozlabs.org/patch/868849/
Which reminds me that I am still waiting for a newer revi
> On 27.12.2018, at 02:00, Kever Yang wrote:
>
> Hi Vagrant,
>
> On 12/25/2018 12:14 AM, Vagrant Cascadian wrote:
>> I'm not so lucky. 2019.01-rc2 hangs even earlier without detecting the
>> ram (on a 4GB ram model)::
>>
>> U-Boot SPL 2019.01-rc2+dfsg-1~20181219~2 (Dec 19 2018 - 23:12:56 +000
Hi Simon,
Could you please point me to the update test you mean? (I assume it's
"test_avb.py"?)
Thanks
BR,
Igor
On Sat, 22 Dec 2018 at 22:52, Simon Glass wrote:
>
> Hi Igor,
>
> On Fri, 14 Dec 2018 at 10:45, Igor Opaniuk wrote:
> >
> > AVB version 1.1 introduces support for named persistent
On Thu, Dec 27, 2018 at 08:55:19AM -0500, Tom Rini wrote:
> On Thu, Dec 27, 2018 at 07:04:05PM +0530, Manivannan Sadhasivam wrote:
>
> > From: Manivannan Sadhasivam
> >
> > Add MMC nodes for HiKey board based on HI6220 SoC. There are three MMC
> > controllers in this SoC, first one used for eMMC
On Tue, Oct 30, 2018 at 4:20 PM Peng Donglin wrote:
>
> If we enable CONFIG_SPL_SYS_MALLOC_SIMPLE and set
> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN, the new gd and stack
> will inside malloc area,so there is a overwrite risk.
>
> We can place the new position of gd and stack under the malloc
> area t
Some tests have ended up using double quotes where single quotes could be
used. Adjust this for consistency with the rest of U-Boot's Python code.
Signed-off-by: Simon Glass
---
test/py/tests/test_avb.py | 14 +--
test/py/tests/test_bind.py| 140 +++---
Hi Igor,
On Thu, 27 Dec 2018 at 07:50, Igor Opaniuk wrote:
>
> Hi Simon,
>
> Could you please point me to the update test you mean? (I assume it's
> "test_avb.py"?)
Yes that's right. The test should cover the functionality of the feature.
Regards,
Simon
_
ok, np. will send in v3 patch
On Thu, 27 Dec 2018 at 17:12, Simon Glass wrote:
>
> Hi Igor,
>
> On Thu, 27 Dec 2018 at 07:50, Igor Opaniuk wrote:
> >
> > Hi Simon,
> >
> > Could you please point me to the update test you mean? (I assume it's
> > "test_avb.py"?)
>
> Yes that's right. The test sh
On Thu, Dec 27, 2018 at 12:49:53PM +0900, Minkyu Kang wrote:
> Dear Tom,
>
> The following changes since commit 1f2e948d6d53f77a2ddb2dde3531b0d5bc2815ad:
>
> Prepare v2019.01-rc2 (2018-12-17 20:25:24 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-samsung ma
On Tue, Dec 11, 2018 at 06:22:28PM +0200, Andy Shevchenko wrote:
> When arguments are not supplied the error message is misleading and
> doesn't tell what exactly has to be done.
>
> Fix this by adding usage() and call it if above circumstance occurs.
>
> Signed-off-by: Andy Shevchenko
> Review
On Fri, Dec 14, 2018 at 10:43:48PM +0100, Heinrich Schuchardt wrote:
> Enable device tree overlay tests by default if unit tests are selected
> and the runtime is configured via device tree.
>
> Overlays have been mainlined in the device tree compiler so there is no
> reason anymore to disable th
On Tue, Dec 18, 2018 at 08:03:49PM +0200, Cristian Ciocaltea wrote:
> dev_stor_get() is not able to find the next available device in the current
> storage group when the previous enumerated device belongs to a different
> group or class (e.g. network).
>
> The root cause is the device group iter
On Fri, Dec 14, 2018 at 04:28:30PM -0600, Adam Ford wrote:
> OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3
> boards. At one point, the #ifdef's were replaced with
> if CONFIG_IS_ENABLED but this won't work for people who need
> OMAP3_GPIO_x in SPL since the SPL prefix for this optio
On Wed, Dec 19, 2018 at 12:53:31PM +0530, Lokesh Vutla wrote:
> For signing the tiboot3.bin image, an optional KEY file can be passed
> using CONFIG_SYS_K3_KEY. Right now, Makefile scripts directly takes
> the config value and uses it for signing. This is okay if the build
> directory is a sub-dir
On Fri, Dec 21, 2018 at 02:57:03AM +0100, Heinrich Schuchardt wrote:
> Describe the implementation of sub-commands.
>
> Signed-off-by: Heinrich Schuchardt
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
__
On Thu, Dec 20, 2018 at 04:12:49PM +0800, Weijie Gao wrote:
> Fix typo: neede -> needed
>
> Signed-off-by: Weijie Gao
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing list
U-Boot@lists.denx.de
ht
On Thu, Dec 20, 2018 at 04:12:50PM +0800, Weijie Gao wrote:
> This patch changes mt7629 to use the compatible platform SMP initialization
> method of linux kernel.
>
> Signed-off-by: Weijie Gao
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
On Mon, Dec 24, 2018 at 04:37:41PM +0530, Lokesh Vutla wrote:
> commit 4f86a724e82c0 ("power: regulator: denied disable on always-on
> regulator") throws an error when requested to disable an always-on
> regulator. It is right that an always-on regulator should not be
> attempted to be disabled. B
On Wed, Dec 19, 2018 at 04:57:38PM +0100, Michal Simek wrote:
> When fixed-link phy is used subnode offset is used as phy address. This
> number is bigger then space allocated for bus structure (allocated via
> mdio_alloc).
> bus->phymap[] array has PHY_MAX_ADDR size (32).
> That's why writing bus
On Tue, Dec 18, 2018 at 12:30:50PM +0100, Lukasz Majewski wrote:
> This commit prevents from re-configuring pins if those were configured
> before relocation.
>
> Some pins - like UART or DDR must be setup before relocation
> (as they have 'u-boot,dm-pre-reloc' property set in DTS). Without this
The IGEP0032 board was never officially pushed upstream and actually I
don't have access to this hardware, unless someone with the hardware
wants to start working on this doesn't makes sense have this defconfig
here. So remove it.
Signed-off-by: Enric Balletbo i Serra
---
board/isee/igep00x0/MAI
The USB support for this board was never really tested, in fact, the
presence of these options are more a copy & paste error from the
Beagleboard than a feature that really was used. As doesn't work, remove
for now. If someone at some point want to add this support he'll need to
migrate the board t
Enable TI_COMMON_CMD_OPTIONS and remove similar options
from the defconfig.
Signed-off-by: Enric Balletbo i Serra
---
board/isee/igep00x0/Kconfig | 2 ++
configs/igep00x0_defconfig | 7 +--
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/board/isee/igep00x0/Kconfig b/board/is
To save more space, switch to simple malloc here.
Signed-off-by: Enric Balletbo i Serra
---
configs/igep00x0_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index 2c2da1e385..b806f23fa5 100644
--- a/configs/igep00x0_defconfig
This adds device tree for OMAP3 IGEP based boards and the DM_MMC driver.
Signed-off-by: Enric Balletbo i Serra
---
arch/arm/dts/Makefile | 3 +
arch/arm/dts/omap3-igep.dtsi| 250 ++
arch/arm/dts/omap3-igep0020-common.dtsi | 264
On 12/27/18 4:11 PM, Simon Glass wrote:
> Some tests have ended up using double quotes where single quotes could be
> used. Adjust this for consistency with the rest of U-Boot's Python code.
>
> Signed-off-by: Simon Glass
Reviewed-by: Heinrich Schuchardt
This adds device tree and the DM_MMC driver for the SL50 board.
Signed-off-by: Enric Balletbo i Serra
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/am335x-sl50.dts | 549 ++
configs/am335x_sl50_defconfig | 3 +
3 files changed, 554 insertions(+), 1 d
The MMC booting wasn't previously fitting into the codespace.
This patch enables MMC booting from the baseboard by reducing
some DM overhead during SPL.
Signed-off-by: Adam Ford
diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c
index ce1c8a5d6b..696f5c4183 100644
--- a
Some architectures (MIPS) needs mapping to access IOMEM.
Fix that.
Fixes: f1dcc19b213d ("net: macb: Convert to driver model")
Signed-off-by: Ramon Fried
---
v2: add casting to phys_addr_t to prevent warning from compiler.
drivers/net/macb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion
Hi! Now I spotted that CONFIG_SYS_TEXT_BASE was moved/removed in commit
278b90ce786f73faf29aa522d5d101e1da006378 from include/configs/nokia_rx51.h
file, but comment which described value for that macro is still on old
place. See diff:
http://git.denx.de/?p=u-boot.git;a=blobdiff;f=include/configs/n
Hello, it seems that MTD partition definitions for Nokia N900 were
removed in commit 43ede0bca7fc1590b623832b743213b818257a27 (Kconfig:
Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT).
See diff:
http://git.denx.de/?p=u-boot.git;a=blobdiff;f=include/configs/nokia_rx51.h;h=b7fe7341e407fd16275ed06d2cd399a
On Thu, Dec 27, 2018 at 07:45:15PM +0100, Pali Rohár wrote:
> Hi! Now I spotted that CONFIG_SYS_TEXT_BASE was moved/removed in commit
> 278b90ce786f73faf29aa522d5d101e1da006378 from include/configs/nokia_rx51.h
> file, but comment which described value for that macro is still on old
> place. See d
On Thu, Dec 27, 2018 at 05:03:30PM +0100, Enric Balletbo i Serra wrote:
> This adds device tree for OMAP3 IGEP based boards and the DM_MMC driver.
>
> Signed-off-by: Enric Balletbo i Serra
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
___
On Thu, Dec 27, 2018 at 07:52:54PM +0100, Pali Rohár wrote:
> Hello, it seems that MTD partition definitions for Nokia N900 were
> removed in commit 43ede0bca7fc1590b623832b743213b818257a27 (Kconfig:
> Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT).
>
> See diff:
> http://git.denx.de/?p=u-boot.git;a=
On Thursday 27 December 2018 13:56:57 Tom Rini wrote:
> On Thu, Dec 27, 2018 at 07:45:15PM +0100, Pali Rohár wrote:
>
> > Hi! Now I spotted that CONFIG_SYS_TEXT_BASE was moved/removed in commit
> > 278b90ce786f73faf29aa522d5d101e1da006378 from include/configs/nokia_rx51.h
> > file, but comment whi
On Thursday 27 December 2018 13:57:59 Tom Rini wrote:
> On Thu, Dec 27, 2018 at 07:52:54PM +0100, Pali Rohár wrote:
>
> > Hello, it seems that MTD partition definitions for Nokia N900 were
> > removed in commit 43ede0bca7fc1590b623832b743213b818257a27 (Kconfig:
> > Migrate MTDIDS_DEFAULT / MTDPART
On Thu, Dec 27, 2018 at 08:05:38PM +0100, Pali Rohár wrote:
> On Thursday 27 December 2018 13:56:57 Tom Rini wrote:
> > On Thu, Dec 27, 2018 at 07:45:15PM +0100, Pali Rohár wrote:
> >
> > > Hi! Now I spotted that CONFIG_SYS_TEXT_BASE was moved/removed in commit
> > > 278b90ce786f73faf29aa522d5d101
On Thu, Dec 27, 2018 at 08:09:56PM +0100, Pali Rohár wrote:
> On Thursday 27 December 2018 13:57:59 Tom Rini wrote:
> > On Thu, Dec 27, 2018 at 07:52:54PM +0100, Pali Rohár wrote:
> >
> > > Hello, it seems that MTD partition definitions for Nokia N900 were
> > > removed in commit 43ede0bca7fc1590b
Chris Spencer reports that when enabling ext4 read support without
also enabling write support the following error is seen:
fs/fs.c:198:12: error: 'ext4_write_file' undeclared here (not in a
function); did you mean 'ext4_read_file'?
.write = ext4_write_file,
^~~
Fix this
Hi Tom,
On Wed, Dec 26, 2018 at 9:27 PM Tom Rini wrote:
> There's the list of boards that it might be. Doing a for B in ...;do
> make O=/tmp/$B ${B}_defconfig oldconfig and I see that yup, ids8313
> trips on the new symbols without having a value. So those two bootcount
> patches from Denis ne
On Thursday 27 December 2018 14:10:26 Tom Rini wrote:
> On Thu, Dec 27, 2018 at 08:05:38PM +0100, Pali Rohár wrote:
> > On Thursday 27 December 2018 13:56:57 Tom Rini wrote:
> > > On Thu, Dec 27, 2018 at 07:45:15PM +0100, Pali Rohár wrote:
> > >
> > > > Hi! Now I spotted that CONFIG_SYS_TEXT_BASE
On Thu, Dec 27, 2018 at 08:21:58PM +0100, Pali Rohár wrote:
> On Thursday 27 December 2018 14:10:26 Tom Rini wrote:
> > On Thu, Dec 27, 2018 at 08:05:38PM +0100, Pali Rohár wrote:
> > > On Thursday 27 December 2018 13:56:57 Tom Rini wrote:
> > > > On Thu, Dec 27, 2018 at 07:45:15PM +0100, Pali Rohá
On Thursday 27 December 2018 14:12:35 Tom Rini wrote:
> On Thu, Dec 27, 2018 at 08:09:56PM +0100, Pali Rohár wrote:
> > On Thursday 27 December 2018 13:57:59 Tom Rini wrote:
> > > On Thu, Dec 27, 2018 at 07:52:54PM +0100, Pali Rohár wrote:
> > >
> > > > Hello, it seems that MTD partition definitio
On Thursday 27 December 2018 14:27:45 Tom Rini wrote:
> On Thu, Dec 27, 2018 at 08:21:58PM +0100, Pali Rohár wrote:
> > On Thursday 27 December 2018 14:10:26 Tom Rini wrote:
> > > On Thu, Dec 27, 2018 at 08:05:38PM +0100, Pali Rohár wrote:
> > > > On Thursday 27 December 2018 13:56:57 Tom Rini wrot
On Thu, Dec 27, 2018 at 08:49:22PM +0100, Pali Rohár wrote:
> On Thursday 27 December 2018 14:27:45 Tom Rini wrote:
> > On Thu, Dec 27, 2018 at 08:21:58PM +0100, Pali Rohár wrote:
> > > On Thursday 27 December 2018 14:10:26 Tom Rini wrote:
> > > > On Thu, Dec 27, 2018 at 08:05:38PM +0100, Pali Rohá
Fix a struct typo and drop a comment (and function prototype) which is not
actually used.
Signed-off-by: Simon Glass
---
include/i2s.h | 11 +--
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/include/i2s.h b/include/i2s.h
index 28f6184811c..7760aab7c46 100644
--- a/includ
This series adds sound support for Nyan. It allows simple beeps to be
generated in U-Boot. This requires the addition of an I2S driver, an
audio hub driver and a sound driver to pull things together. An existing
audio codec (MAX98090) is used.
Simon Glass (11):
misc: Allow child devices
sound
Allow misc devices to have children, so that we can use this uclass for
cases where a child device (e.g. I2S) needs to access a misc driver for
transferring data.
Signed-off-by: Simon Glass
---
drivers/misc/misc-uclass.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/misc/misc-ucla
Add a sound driver for tegra devices. This connects the audio hub, I2S
controller and audio codec to allow sound output.
Signed-off-by: Simon Glass
---
drivers/sound/Makefile | 2 +-
drivers/sound/tegra_sound.c | 100
2 files changed, 101 insertions(+
Add a driver which supports transmitting digital sound to an audio codec.
This uses fixed parameters as a device-tree binding is not currently
defined.
Signed-off-by: Simon Glass
---
arch/arm/include/asm/arch-tegra/tegra_i2s.h | 206
drivers/sound/Makefile
The first clock type appears to have and incorrect setting for out of the
mux outputs. It should be CLK_M, not OSC. Fix it and its only user.
Signed-off-by: Simon Glass
---
arch/arm/mach-tegra/tegra124/clock.c | 2 +-
board/nvidia/nyan-big/nyan-big.c | 2 +-
2 files changed, 2 insertions(+)
Fix a typo that appears many times in this file.
Signed-off-by: Simon Glass
---
drivers/sound/samsung-i2s.c | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c
index c19e08e7e30..104584073af 100644
--- a/
At present there is still some samsung-specific code in the audio codecs.
Remove it so that these can be used by other SoCs.
Signed-off-by: Simon Glass
---
drivers/sound/Kconfig | 8
drivers/sound/max98088.c | 7 ---
drivers/sound/max98090.c | 7 ---
drivers/s
This function enables a peripheral clock and then immediately sets its
divider. Add a delay to allow the clock to settle first. This matches the
delay in other places which do a similar thing.
Without this, the I2S device on Nyan does not init properly.
Signed-off-by: Simon Glass
---
arch/arm/
Add a short note about how to boot U-Boot on Nyan-big using tegrarcm.
Signed-off-by: Simon Glass
---
board/nvidia/nyan-big/README | 18 ++
1 file changed, 18 insertions(+)
create mode 100644 board/nvidia/nyan-big/README
diff --git a/board/nvidia/nyan-big/README b/board/nvidia/
Add a driver for the audio hub. This is modelled as a misc device which
supports writing audio data from I2S.
Signed-off-by: Simon Glass
---
arch/arm/include/asm/arch-tegra/tegra_ahub.h | 475 +++
drivers/sound/Kconfig| 9 +
drivers/sound/Makefile
Enable sound output. With this, 'sound play 1000 400' emits a simple beep.
Signed-off-by: Simon Glass
---
configs/nyan-big_defconfig | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig
index ae6d76dfb20..b91da5b36d6
On Thursday 27 December 2018 20:32:56 Pali Rohár wrote:
> On Thursday 27 December 2018 14:12:35 Tom Rini wrote:
> > On Thu, Dec 27, 2018 at 08:09:56PM +0100, Pali Rohár wrote:
> > > On Thursday 27 December 2018 13:57:59 Tom Rini wrote:
> > > > On Thu, Dec 27, 2018 at 07:52:54PM +0100, Pali Rohár wr
On Monday, 24 December 2018, 21:37:01 GMT, Nikolai Zhubr
wrote:
>>24.12.2018 22:54, John S:
>> Isn't it caused by the software as stated above, i.e. nothing to do with
>> Olimex?
> Well, IMHO is has to do with Olimex because they designed this specific
> circuitry, and the circuitry is such that
On Thu, Dec 27, 2018 at 08:32:56PM +0100, Pali Rohár wrote:
> On Thursday 27 December 2018 14:12:35 Tom Rini wrote:
> > On Thu, Dec 27, 2018 at 08:09:56PM +0100, Pali Rohár wrote:
> > > On Thursday 27 December 2018 13:57:59 Tom Rini wrote:
> > > > On Thu, Dec 27, 2018 at 07:52:54PM +0100, Pali Rohá
On Thursday 27 December 2018 15:53:06 Tom Rini wrote:
> On Thu, Dec 27, 2018 at 08:32:56PM +0100, Pali Rohár wrote:
> > On Thursday 27 December 2018 14:12:35 Tom Rini wrote:
> > > On Thu, Dec 27, 2018 at 08:09:56PM +0100, Pali Rohár wrote:
> > > > On Thursday 27 December 2018 13:57:59 Tom Rini wrot
On Thu, Dec 27, 2018 at 10:01:43PM +0100, Pali Rohár wrote:
> On Thursday 27 December 2018 15:53:06 Tom Rini wrote:
> > On Thu, Dec 27, 2018 at 08:32:56PM +0100, Pali Rohár wrote:
> > > On Thursday 27 December 2018 14:12:35 Tom Rini wrote:
> > > > On Thu, Dec 27, 2018 at 08:09:56PM +0100, Pali Rohá
Hi,
27.12.2018 23:48, 'John S' via linux-sunxi:
Well, IMHO is has to do with Olimex because they designed this specific
circuitry, and the circuitry is such that 5V voltage constantly applied
to the micro-usb connector might essentially become disconnected (at the
board side) by programming -- i
U-Boot supports using TrueType fonts on the console, which is useful for
presenting a nice UI to users, e.g. for system recovery.
Add information about how to compile this on ARM platforms, since this is
not obvious.
Signed-off-by: Simon Glass
---
doc/README.video | 20
1
As an example of how to enable TrueType fonts, move chromebook_jerry over
to use these.
Signed-off-by: Simon Glass
---
configs/chromebook_jerry_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/chromebook_jerry_defconfig
b/configs/chromebook_jerry_defconfi
At present it is possible to enable TrueType support but not include any
fonts. This results in a blank display. Select Nimbus as the default font
to avoid this.
Signed-off-by: Simon Glass
---
drivers/video/fonts/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fonts/Kc
Hi Lokesh,
On Mon, 24 Dec 2018 at 04:08, Lokesh Vutla wrote:
>
> commit 4f86a724e82c0 ("power: regulator: denied disable on always-on
> regulator") throws an error when requested to disable an always-on
> regulator. It is right that an always-on regulator should not be
> attempted to be disabled.
Hi Lukasz,
On Wed, 19 Dec 2018 at 03:11, Lukasz Majewski wrote:
>
> Dear Simon and Simon,
>
> > Am 05.12.2018 um 14:57 schrieb Simon Glass:
> > > This option has crept into use with some boards. Add a warning to
> > > try to prevent this.
> > >
> > > As an example:
> > > https://lists.denx.de
On Sat, Dec 15, 2018 at 1:37 AM Derald D. Woods
wrote:
> This commit converts the following items to Kconfig:
>
> CONFIG_ATMEL_NAND_HWECC
> CONFIG_ATMEL_NAND_HW_PMECC
> CONFIG_PMECC_CAP
> CONFIG_PMECC_SECTOR_SIZE
> CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
>
> [PMECC References]
> https://www.at91.c
On Thu, Dec 27, 2018 at 09:27:01AM +0100, Alexander Graf wrote:
> Hi Tom,
>
> This is my current patch queue for efi against v2019.01. Please pull.
>
> Alex
>
>
> The following changes since commit 1f2e948d6d53f77a2ddb2dde3531b0d5bc2815ad:
>
> Prepare v2019.01-rc2 (2018-12-17 20:25:24 -050
On 12/27/2018 07:56 PM, Philipp Tomsich wrote:
> Kever,
>
>> On 27.12.2018, at 02:07, Kever Yang wrote:
>>
>> System will get size '0' in 32bit system if the size is 4GB
>> for the address is 32bit only, return the max space available
>> instead of actual DDR size in rockchip_sdram_size().
>>
>>
This is workaround for issue we can't get correct size for 4GB ram
in 32bit system and available before we really need ram space
out of 4GB, eg.enable ARM LAPE(rk3288 supports 8GB ram).
The size of 4GB is '0x1 ', and this value will be truncated
to 0 in 32bit system, and system can not get
Dear Guillaume GARDET,
On 28/12/18 00:41, Tom Rini wrote:
> On Thu, Dec 27, 2018 at 12:49:53PM +0900, Minkyu Kang wrote:
>
>> Dear Tom,
>>
>> The following changes since commit 1f2e948d6d53f77a2ddb2dde3531b0d5bc2815ad:
>>
>> Prepare v2019.01-rc2 (2018-12-17 20:25:24 -0500)
>>
>> are available i
Sound support for jerry was never included in the initial port. Now that
sound has been converted to driver model it seems like a good opportunity
to fill this gap. Jerry uses an audio codec that is already supported by
U-Boot.
Add the required drivers and enable the config so that
'sound play 500
Add a driver for I2S which allows audio data to be sent from the SoC to
the audio codec. The sample rate and other settings are hard-coded for now
as there is no suitable device-tree binding available.
Signed-off-by: Simon Glass
---
drivers/sound/Kconfig| 9 +++
drivers/sound/Makefile
Add a sound driver for rk3288 supporting chromebook_jerry. This uses the
I2S driver, and existing audio codec and the clock/pinmux support.
Signed-off-by: Simon Glass
---
drivers/sound/Makefile | 2 +-
drivers/sound/rockchip_sound.c | 132 +
2 files cha
Add support for setting pinctrl and clock for I2S on rk3288. This allows
the sound driver to operate. These settings were created by rkmux.py
Signed-off-by: Simon Glass
---
.../include/asm/arch-rockchip/cru_rk3288.h| 8 ++
.../include/asm/arch-rockchip/grf_rk3288.h| 96
Jerry uses a max98090 audio codec and the internal SoC I2S peripheral.
Enable sound support and add the required device-tree pieces.
Signed-off-by: Simon Glass
---
arch/arm/dts/rk3288-veyron-jerry.dts | 12
arch/arm/dts/rk3288-veyron.dtsi | 1 +
arch/arm/dts/rk3288.dtsi
1 - 100 of 106 matches
Mail list logo
