On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng wrote:
> This patchset trys to add support for Allwinner H6 SoC to U-Boot.
>
> Allwinner H6 is a quite new Allwinner SoC, with several parts changed a
> lot (memory map, DRAM controller, CCU, so on). The position which SPL
> will be loaded (SRAM A1) a
于 2018年7月26日 GMT+08:00 下午3:02:50, Jagan Teki 写到:
>On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng wrote:
>> This patchset trys to add support for Allwinner H6 SoC to U-Boot.
>>
>> Allwinner H6 is a quite new Allwinner SoC, with several parts changed
>a
>> lot (memory map, DRAM controller, CCU, s
-Original Message-
From: York Sun
Sent: 2018年7月17日 22:52
To: Yinbo Zhu ; u-boot@lists.denx.de
Cc: Y.b. Lu ; Xiaobo Xie
Subject: Re: [PATCH v2 1/8] Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig
On 07/17/2018 03:50 AM, Yinbo Zhu wrote:
>
>
> -Original Message-
> From: York Sun
doc/DocBook has removed in below commit
"doc: Replace DocBook with sphinx-based docs"
(sha1: 78a88f7930becb78afef09c1237a8e4edc1b01e1)
and missed to remove it from clean-dirs, otherwise
'make clean' shows an error as below.
$ make clean
scripts/Makefile.clean:15: doc/DocBook/Makefile: No such fil
Hi Jagan,
Jagan Teki wrote on Thu, 26 Jul 2018
11:00:56 +0530:
> On Fri, Jul 13, 2018 at 6:01 PM, Miquel Raynal
> wrote:
> > During the last months, Boris Brezillon shared his work to support
> > serial flashes within Linux. First, he delivered (and merged) a new
> > layer called spi-mem. He al
The following changes since commit 323a73adc9a1bf2de43fe03bdd9c3038ce7c2784:
mtd: nand: add new enum for storing ECC algorithm (2018-07-23 14:33:21
-0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sh.git master
for you to fetch changes up to a6759e3dfca217ba8cc518edcd
The following changes since commit 323a73adc9a1bf2de43fe03bdd9c3038ce7c2784:
mtd: nand: add new enum for storing ECC algorithm (2018-07-23 14:33:21
-0400)
are available in the Git repository at:
git://git.denx.de/u-boot-usb.git master
for you to fetch changes up to 67f1c59f40fde73cb2cbb51eb
The following changes since commit 323a73adc9a1bf2de43fe03bdd9c3038ce7c2784:
mtd: nand: add new enum for storing ECC algorithm (2018-07-23 14:33:21
-0400)
are available in the Git repository at:
git://git.denx.de/u-boot-socfpga.git master
for you to fetch changes up to 64eeb1585428b71e29022
From: Tien Fong Chee
The purpose of this patchset provides example of using the generic FS loader
which is currently under review at
/data/tfchee/a10_upstreaming/mainstream/17_1_18/patches/firmware_loader_usage .
Basically, the whole machanism is working in two ways:
1. SPL -> spl_board_init ->
From: Tien Fong Chee
Add FPGA drivers to support FPGA loadfs to program FPGA.
The drivers are designed based on generic firmware loader framework,
specific firmware loader handling is defined in fpga_manager_arria10.c.
These drivers can handle FPGA program operation from
loading RBF image in flas
From: Tien Fong Chee
Add code necessary into the FPGA driver framework in U-Boot
so it can be used via the 'fpga' command for programing Arria 10
SoCFPGA.
Signed-off-by: Tien Fong Chee
---
cmd/fpga.c|2 +-
drivers/fpga/altera.c | 41 +
From: Tien Fong Chee
Signed-off-by: Tien Fong Chee
---
arch/arm/dts/socfpga_arria10.dtsi| 12
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts |6 ++
configs/socfpga_arria10_defconfig| 12
3 files changed, 30 insertions(+), 0 deletions(-
On 07/26/2018 09:54 AM, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Signed-off-by: Tien Fong Chee
> ---
> arch/arm/dts/socfpga_arria10.dtsi| 12
> arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts |6 ++
> configs/socfpga_arria10_defconfig
On 25.7.2018 21:17, Stefan Herbrechtsmeier wrote:
> Hi Michal,
>
> Am 25.07.2018 um 08:07 schrieb Michal Simek:
>> On 24.7.2018 21:39, Stefan Herbrechtsmeier wrote:
>>> Am 24.07.2018 um 10:37 schrieb Michal Simek:
On 23.7.2018 20:29, Stefan Herbrechtsmeier wrote:
> Am 23.07.2018 um 11:08
On Fri, Jul 20, 2018 at 11:34 PM Tom Rini wrote:
>
> On Thu, Jul 05, 2018 at 12:38:15PM +, Alex Kiernan wrote:
>
> > The test for (CONFIG_BOOTDELAY >= 0) has been in U-Boot since the
> > beginning, but the meaning of it has changed over time. Allow the
> > default to be set for any value, incl
On 25.7.2018 20:21, Stefan Herbrechtsmeier wrote:
> Am 25.07.2018 um 08:39 schrieb Michal Simek:
>> On 24.7.2018 21:56, Stefan Herbrechtsmeier wrote:
>>> Am 24.07.2018 um 12:31 schrieb Michal Simek:
On 23.7.2018 20:42, Stefan Herbrechtsmeier wrote:
> Am 23.07.2018 um 13:43 schrieb Michal S
On 25.7.2018 18:03, Tom Rini wrote:
> On Wed, Jul 25, 2018 at 09:47:17AM -0600, Simon Glass wrote:
>> Hi,
>>
>> On 25 July 2018 at 03:48, Michal Simek wrote:
>>>
>>> On 25.7.2018 08:31, Chee, Tien Fong wrote:
On Wed, 2018-07-18 at 16:48 +0200, Michal Simek wrote:
> On 6.7.2018 10:28, tien
Hi Horia,
Thanks for having a look. Comments inline.
On 25.07.2018 20:55, Horia Geanta wrote:
> On 7/24/2018 5:05 PM, laurentiu.tu...@nxp.com wrote:
>> From: Laurentiu Tudor
>>
>> Add support for SEC ICID configuration and apply it for ls1046a.
>> Also add code to make the necessary device tree
On 26.7.2018 09:54, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Add code necessary into the FPGA driver framework in U-Boot
> so it can be used via the 'fpga' command for programing Arria 10
> SoCFPGA.
>
> Signed-off-by: Tien Fong Chee
> ---
> cmd/fpga.c|2 +-
>
On Wed, 2018-07-25 at 11:48 +0200, Michal Simek wrote:
> On 25.7.2018 08:31, Chee, Tien Fong wrote:
> >
> > On Wed, 2018-07-18 at 16:48 +0200, Michal Simek wrote:
> > >
> > > On 6.7.2018 10:28, tien.fong.c...@intel.com wrote:
> > > >
> > > >
> > > > From: Tien Fong Chee
> > > >
> > > > This i
This syncs U-Boot's include/linux/mii.h with Linux kernel v4.17
include/uapi/linux/mii.h.
While we are here, this also fixes some style issues.
Signed-off-by: Bin Meng
---
include/linux/mii.h | 126
1 file changed, 69 insertions(+), 57 delet
This syncs U-Boot's include/linux/mdio.h with Linux kernel v4.17
include/uapi/linux/mdio.h.
Signed-off-by: Bin Meng
---
include/linux/mdio.h | 34 ++
1 file changed, 30 insertions(+), 4 deletions(-)
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index
Currently there are two ethernet drivers (mvneta.c and mvpp2.c) that
has netdev_### (eg: netdev_dbg) log macros defined in its own driver
file. This adds these log macros in a common place linux/compat.h.
Signed-off-by: Bin Meng
---
drivers/net/mvneta.c | 8
drivers/net/mvpp2.c|
On 26.7.2018 11:23, Chee, Tien Fong wrote:
> On Wed, 2018-07-25 at 11:48 +0200, Michal Simek wrote:
>> On 25.7.2018 08:31, Chee, Tien Fong wrote:
>>>
>>> On Wed, 2018-07-18 at 16:48 +0200, Michal Simek wrote:
On 6.7.2018 10:28, tien.fong.c...@intel.com wrote:
>
>
> From: Tien
On 26.7.2018 09:54, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Add FPGA drivers to support FPGA loadfs to program FPGA.
> The drivers are designed based on generic firmware loader framework,
> specific firmware loader handling is defined in fpga_manager_arria10.c.
> These drivers
On Tue, 2018-07-24 at 10:07 +0200, Dr. Philipp Tomsich wrote:
>
> I have a patchset for changing the relevant fields in U-Boot to allow
> for 33bits (i.e. using u64) for the RAM size and it finally passes
> Travis cleanly.
> It will be another round or two of cleanup before I can submit the
> seri
Prepare for [1] so that it doesn't break the build for a bunch of
boards. There are a number of reasons this series broke the build
but none of them depend on changes in the series, so fix up those
situations ahead of applying that series.
[1] https://patchwork.ozlabs.org/cover/940104/
Joe Hersh
On 7/24/2018 5:05 PM, laurentiu.tu...@nxp.com wrote:
> From: Laurentiu Tudor
>
> Add support for SEC ICID configuration and apply it for ls1046a.
> Also add code to make the necessary device tree fixups.
> Also included in this patch, while adding the new required JR
> defines sanitize the preexi
>From: Patrick Delaunay [mailto:patrick.delau...@st.com]
>Sent: Dienstag, 24. Juli 2018 10:59
>Subject: [PATCH v3 5/5] sandbox: led: use new function to configure default
>state
>
>Initialize the led with the default state defined in device tree
>in board_init and solve issue with test for led defa
Hi Patrick,
sorry, for responding so late, I am in the middle of a vacation at the moment.
>From: Patrick Delaunay [mailto:patrick.delau...@st.com]
>Sent: Dienstag, 24. Juli 2018 10:59
>Subject: [PATCH v3 3/5] dm: led: move default state support in led uclass
>
>This patch save common LED property
From: Caliph Nomble
Fix LibreSSL compilation for versions before v2.7.0.
Signed-off-by: Caliph Nomble
---
Tested compilation on LibreSSL v2.7.4 and v2.6.4 with no new errors or
warnings.
Changes for v2:
- fixed commit message conventions
- fixed coding style
lib/rsa/rsa-sign.c | 18 +
Add support for SPANSION s25fl128l
Changes for v2:
- Fix EXT_ID
Changes for v3:
- s25fl128l have only one version and no EXT_ID
Signed-off-by: Clément Laigle
Cc: Jagan Teki
---
drivers/mtd/spi/spi_flash_ids.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/spi/spi_flas
On Wed, Jul 25, 2018 at 08:52:40AM +0900, Masahiro Yamada wrote:
> Hi Tom,
>
> Please pull UniPhier updates + Kconfig warning fix.
>
> Thanks.
>
>
>
> The following changes since commit 323a73adc9a1bf2de43fe03bdd9c3038ce7c2784:
>
> mtd: nand: add new enum for storing ECC algorithm (2018-07
On Wed, Jul 25, 2018 at 11:40:30AM -0400, Tom Rini wrote:
> Now that we have removed the DocBook files we need to not try and clean
> that directory.
>
> Reported-by: ericywl
> Fixes: 78a88f7930be ("doc: Replace DocBook with sphinx-based docs")
> Signed-off-by: Tom Rini
Applied to u-boot/maste
Add u-boot,off-on-delay-us for fixed regulator.
Depends on board design, the gpio regulator sometimes
connects with a big capacitance. When need to off, then
on the regulator, if there is no enough delay,
the voltage does not drop to 0, so introduce this
property to handle such case.
Signed-off-b
Hi Tom,
On Wed, Jul 25, 2018 at 12:25 PM, Tom Rini wrote:
> I just yesterday consolidated into just doc/device-tree-bindings/ as
> everything else was already in there.
Excellent, I saw that Breno's patch has been applied.
Thanks
___
U-Boot mailing l
The Assigned Clock parents and rates misses the fact that a "0" entry can
be passed to skip setting a parent or rate of an assigned clock as
described in the Linux clock bindings at [1].
This patch simply skips the clock reparenting if the DT parsing returns
-ENOENT and the clock rate setting if "
Dear Sam,
In message
you wrote:
>
> Does this series look ok to you? Can you please review?
Sorry for the delay.
Hm... I wonder if we should handle patch 1/2 in the same way as done
in 2/2, i. e. not remove the printf() in the error case, but turn it
into a debug() ?
Best regards,
Wolfgang D
Dear Aaron,
In message <610.LK6WS1oxaM@awilliams-suse> you wrote:
>
...
> While mainline U-Boot does not support Octeon, we have our own fork of it
> that
> I maintain. I am using the 2018.07 release with only a few minor changes
> around the periphery to support the older version of U-Boot
The Amlogic Meson SoCs embeds a specific Power Domain dedicated to the
Video Processing Unit.
This patch implements support for this power domain in preparation of the
future support for the Video display support in U-Boot.
This driver will depend on changes in the clock driver to handle the setup
The Amlogic Meson SoCs embeds a specific Power Domain dedicated to the
Video Processing Unit.
The first patch implements support for this power domain in preparation of the
future support for the Video display support in U-Boot.
The second patch adds changes in the clock driver to handle the setup
This patch adds support for :
- Rate calculation through muxes and generic dividers
- Basic gate setting propagation
- Reparenting for muxes
- Clock rate setting through generic dividers without reparenting
Support is only added to the Composite VPU and VAPB clocks in order
to support the Video Pr
> -Original Message-
> From: Peng Fan
> Sent: 2018年7月26日 19:47
> To: s...@chromium.org; tr...@konsulko.com
> Cc: yamada.masah...@socionext.com; u-boot@lists.denx.de; Peng Fan
>
> Subject: [PATCH V2] drivers: regulator: fixed: add u-boot,off-on-delay-us
>
> Add u-boot,off-on-delay-us for
Even on 32bit systems a full 4GB of DRAM may be installed and reported
by the DRAM controller. Whether these 4GB are larger available
depends on the size/configuration of address decoding windows and
architectural features (e.g. consider a hypothetical architecture that
uses dedicated instructions
Even on 32bit systems a full 4GB of DRAM may be installed and reported
by the DRAM controller. Whether these 4GB are larger available
depends on the size/configuration of address decoding windows and
architectural features.
This increases the fields holding the RAM size to have at least 33bits
(
With the recent changes of the underlying types for the ram size, we need
to adjust the formatting. Use PRIx64 to print the (now) u64 field.
Signed-off-by: Philipp Tomsich
---
arch/mips/mach-bmips/dram.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/mach-bmips/d
With the change of the ram size fields to u64, we need to use explicit
casts to ensure that min()-implementation sees the same type for both
its arguments.
Signed-off-by: Philipp Tomsich
---
arch/powerpc/cpu/mpc85xx/cpu.c | 6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a
With the recent changes of the underlying types for the ram size, we need
to cast the constant used in clamping to u64 instead of size_t.
Signed-off-by: Philipp Tomsich
---
drivers/ram/rockchip/dmc-rk3368.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ram/rockchip
With the change to a 64bit ram size field for 32bit architectures, we need
to add an explicit cast to truncate when converting to a pointer.
This casts to 'void*' through 'uintptr_t'.
Signed-off-by: Philipp Tomsich
---
board/keymile/km_arm/km_arm.c | 6 --
1 file changed, 4 insertions(+), 2
With the recent changes of the underlying types for the ram size, we
need to adjust the formatting. Use PRIx64 to print the (now) u64
field.
Signed-off-by: Philipp Tomsich
---
board/compulab/cm_fx6/cm_fx6.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/compulab/cm
With the ram-size variable changed to u64, we'll need appropriate
macros for printing u64 values correctly either in 32bit builds
(i.e. ILP32 models) or in 64bit builds (i.e. LP64 models). Best to
make the PRIx64 macro available everywhere.
This include inttypes.h from common.h to make the variou
With the recent changes of the underlying types for the ram size, we
need to adjust the formatting. Use PRIx64 to print the (now) u64
field.
Signed-off-by: Philipp Tomsich
---
arch/arm/mach-stm32mp/dram_init.c | 2 +-
drivers/ram/stm32mp1/stm32mp1_ram.c | 2 +-
2 files changed, 2 insertions(
On Thu, Jul 26, 2018 at 07:16:36AM +0200, Simon Goldschmidt wrote:
> Simon, Maxime,
>
> any input on this? Via which tree would this be pushed? Should we CC Tom?
>
> It would be nice if 2018.09 had this bug fixed (endless loop in env_save()
> on error).
This looks good to me but Tom will probabl
The calculation in `rockchip_sdram_size` would overflow for 4GB on
32bit systems (i.e. when PHYS_64BIT is not defined).
This makes the internal variables and the signature prototype use a
u64 to ensure that we can represent the 33rd bit (as in '4GB').
Signed-off-by: Philipp Tomsich
---
arch/ar
Hi,
We are using this framework for a while and by adding more and more
features it requires small redesigned how commands are handled.
This is something what I have put together to improve readability of
this code and also remove code which is bogus and completely untested.
The patch
https://lis
The patch applied in 2010
"cmd_fpga: cleanup help and check parameters"
(sha1: a790b5b2326be9d7c9ad9e3d9b51a8bfabc62d07"
was adding this checking
+ if (dev == FPGA_INVALID_DEVICE) {
+ puts("FPGA device not specified\n");
+ op = FPGA_NONE;
+ }
which simply b
Clean fpga_get_op() error handling by moving checking/print to do_fpga.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
cmd/fpga.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/cmd/fpga.c b/cmd/fpga.c
index 791fe5cb7718..abe683720285 10
Move fpga_get_op() to top of file to remove local function declaration
and also remove useless retyping.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
cmd/fpga.c | 85 ++
1 file changed, 41 insertions(+
There is no reason to check parameters in separate switch before main
one. This patch is simplifying error path and checking parameters right
after assignment.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
cmd/fpga.c | 44 +---
Parameter checking is dead code because all the time there must be all
params assigned. If they are not assigned there is no 9th parameters
passed and checking before return CMD_RET_USAGE.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
cmd/fpga.c | 7 ---
1 f
Convert loadmk command to fpga subcommands. Not all combinations are
working but they have never worked properly. This will be fixed later.
Signed-off-by: Michal Simek
---
Changes in v1: None
cmd/fpga.c | 238 -
1 file changed, 123 in
FPGA subsystem requires special care that's why it should be maintained
via one tree.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
MAINTAINERS | 8
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index b2c9717cb764..3d3cd855cc6a
Move fpga info to U_BOOT_CMD_MKENT subcommand.
Also use strtol instead of simple_strtoul. The reason is that if -1 is
passed (or fpga info without "fpga" variable) the list of all fpgas is
shown.
This functionality is in the fpga core but it couldn't be performed.
Signed-off-by: Michal Simek
Revi
Create command wrapper to clean fpga subcommands.
The function logic is taken from cmd_dm.c
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
cmd/fpga.c | 42 --
1 file changed, 40 insertions(+), 2 deletions(-)
diff --git a/c
There is no reason to check parameters in separate switch. Check them
directly when they are read. Also there is no reason to check loadmk
case separately because fpga_data address must be non zero too.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
cmd/fpga.c |
Add support for info, load, loadp, loadb, loadbp, loadmk_legacy,
loadmk_legacy_gz, loadmk_fit, loadfs also with variable support.
There are probably missing failed tests.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1:
- Remove debug message checking (unfortunatelly we
Incorrect command is already handled and FPGA_NONE should be used only
one. In case of error CMD_RET_USAGE can be returned directly without any
addition logic around.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
cmd/fpga.c | 8 ++--
1 file changed, 2 insert
Not all 4 fpga loadmk FIT image commands
Signed-off-by: Michal Simek
- New patch from RFC
---
Changes in v1: None
cmd/fpga.c | 55 +++
1 file changed, 35 insertions(+), 20 deletions(-)
diff --git a/cmd/fpga.c b/cmd/fpga.c
index 9cb0116af734
Use standard return command failure macro.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
cmd/fpga.c | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/cmd/fpga.c b/cmd/fpga.c
index de9d19dd8e91..89fae86b8253 100644
--- a/cmd/fpga.
Separate dump, load, loadb, loadp and loadbp commands to separate
functions to make it clear how they are called and what parameters they
need.
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass
---
Changes in v1: None
Maybe they can be still groupped together with one switch/case but it
can
Convert last loads command to fpga subcommands.
Signed-off-by: Michal Simek
---
Changes in v1: None
cmd/fpga.c | 148 +++--
1 file changed, 36 insertions(+), 112 deletions(-)
diff --git a/cmd/fpga.c b/cmd/fpga.c
index 89fae86b8253..88a8e
Convert loadfs command to fpga subcommands.
Signed-off-by: Michal Simek
---
Changes in v1: None
cmd/fpga.c | 58 --
1 file changed, 28 insertions(+), 30 deletions(-)
diff --git a/cmd/fpga.c b/cmd/fpga.c
index 9c715db80512..826f63371a66 1
On Wed, Jul 25, 2018 at 10:13:03PM -0400, nom...@palism.com wrote:
> From: Caliph Nomble
>
> Fix LibreSSL compilation for versions before v2.7.0.
>
> Signed-off-by: Caliph Nomble
> ---
> Tested compilation on LibreSSL v2.7.4 and v2.6.4 with no new errors or
> warnings.
Builds on OpenBSD -curre
On Thu, Jul 26, 2018 at 09:35:54AM +0200, Marek Vasut wrote:
> The following changes since commit 323a73adc9a1bf2de43fe03bdd9c3038ce7c2784:
>
> mtd: nand: add new enum for storing ECC algorithm (2018-07-23 14:33:21
> -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u
Hi Lukasz,
On 26 July 2018 at 03:55, Lukasz Majewski wrote:
> This commit allows by default booting Odroid XU3 from the SD card (when
> e.g. eMMC module is not present).
>
> Signed-off-by: Lukasz Majewski
>
> ---
>
> include/configs/odroid_xu3.h | 7 +--
> 1 file changed, 5 insertions(+), 2
On 64bit platforms we would otherwise see:
../cmd/ubi.c: In function 'ubi_volume_read':
../cmd/ubi.c:359:16: warning: format '%u' expects argument of type 'unsigned
int', but argument 2 has type 'size_t {aka long unsigned int}' [-Wformat=]
Fixes: 68c7025d99db ("cmd: ubi: print load size after est
On Thu, Jul 26, 2018 at 11:32:25AM -0400, Tom Rini wrote:
> - printf("Read %u bytes from volume %s to %p\n", size, volume, buf);
> + printf("Read %zd bytes from volume %s to %p\n", size, volume, buf);
Why make it signed? "%zu bytes" should be better.
Martin
___
On Thu, Jul 26, 2018 at 05:36:01PM +0200, Martin Husemann wrote:
> On Thu, Jul 26, 2018 at 11:32:25AM -0400, Tom Rini wrote:
> > - printf("Read %u bytes from volume %s to %p\n", size, volume, buf);
> > + printf("Read %zd bytes from volume %s to %p\n", size, volume, buf);
>
> Why make it signed
On 64bit platforms we would otherwise see:
../cmd/ubi.c: In function 'ubi_volume_read':
../cmd/ubi.c:359:16: warning: format '%u' expects argument of type 'unsigned
int', but argument 2 has type 'size_t {aka long unsigned int}' [-Wformat=]
Fixes: 68c7025d99db ("cmd: ubi: print load size after est
Hi Anand,
> Hi Lukasz,
>
> On 26 July 2018 at 03:55, Lukasz Majewski wrote:
> > This commit allows by default booting Odroid XU3 from the SD card
> > (when e.g. eMMC module is not present).
> >
> > Signed-off-by: Lukasz Majewski
> >
> > ---
> >
> > include/configs/odroid_xu3.h | 7 +--
> >
Scott is no longer maintaining the NAND subsystem, mark as orphaned for
now.
Cc: Scott Wood
Signed-off-by: Tom Rini
---
Thanks again for your time and contributions Scott!
---
MAINTAINERS| 4 ++--
doc/git-mailrc | 3 +--
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/MAINTAI
On 07/26/2018 07:00 AM, Philipp Tomsich wrote:
> With the change of the ram size fields to u64, we need to use explicit
> casts to ensure that min()-implementation sees the same type for both
> its arguments.
>
> Signed-off-by: Philipp Tomsich
> ---
>
> arch/powerpc/cpu/mpc85xx/cpu.c | 6 --
On 07/25/2018 11:52 PM, Michal Simek wrote:
> On 25.7.2018 23:18, York Sun wrote:
>> On 07/24/2018 10:58 PM, Michal Simek wrote:
>>> On 24.7.2018 18:26, York Sun wrote:
On 07/24/2018 06:07 AM, Michal Simek wrote:
> There is no reason to limit gzip usage only for OS_BOOT and kernel image
>>
On Thu, 2018-07-26 at 12:03 -0400, Tom Rini wrote:
> Scott is no longer maintaining the NAND subsystem, mark as orphaned for
> now.
>
> Cc: Scott Wood
> Signed-off-by: Tom Rini
> ---
> Thanks again for your time and contributions Scott!
> ---
> MAINTAINERS| 4 ++--
> doc/git-mailrc | 3 +--
On 07/25/2018 10:27 PM, Ran Wang wrote:
> Hi York,
>
>> -Original Message-
>> From: York Sun
>> Sent: Tuesday, July 24, 2018 23:40
>> To: Ran Wang ; Albert Aribaud
>>
>> Cc: u-boot@lists.denx.de
>> Subject: Re: [PATCH] armv8: layerscape: Enable EHCI access for LS1012A
>>
>> On 07/10/2018
On Thu, Jul 26, 2018 at 01:59:20PM +, Peng Fan wrote:
> > -Original Message-
> > From: Peng Fan
> > Sent: 2018年7月26日 19:47
> > To: s...@chromium.org; tr...@konsulko.com
> > Cc: yamada.masah...@socionext.com; u-boot@lists.denx.de; Peng Fan
> >
> > Subject: [PATCH V2] drivers: regulator
On Thu, Jul 26, 2018 at 04:23:14PM +, York Sun wrote:
> On 07/25/2018 11:52 PM, Michal Simek wrote:
> > On 25.7.2018 23:18, York Sun wrote:
> >> On 07/24/2018 10:58 PM, Michal Simek wrote:
> >>> On 24.7.2018 18:26, York Sun wrote:
> On 07/24/2018 06:07 AM, Michal Simek wrote:
> > There
On 07/24/2018 05:44 AM, Tom Rini wrote:
> On Tue, Jul 10, 2018 at 08:40:17AM +0200, Mario Six wrote:
>
>> The Linux kernel moved to sphinx-based documentation and got rid of the
>> DocBook based documentation quite a while ago. Hence, the DocBook
>> documentation for U-Boot should be converted as
On Thu, Jul 26, 2018 at 05:58:24PM +, York Sun wrote:
> On 07/24/2018 05:44 AM, Tom Rini wrote:
> > On Tue, Jul 10, 2018 at 08:40:17AM +0200, Mario Six wrote:
> >
> >> The Linux kernel moved to sphinx-based documentation and got rid of the
> >> DocBook based documentation quite a while ago. H
On 07/26/2018 10:58 AM, York Sun wrote:
> On 07/24/2018 05:44 AM, Tom Rini wrote:
>> On Tue, Jul 10, 2018 at 08:40:17AM +0200, Mario Six wrote:
>>
>>> The Linux kernel moved to sphinx-based documentation and got rid of the
>>> DocBook based documentation quite a while ago. Hence, the DocBook
>>> do
On Thu, Jul 26, 2018 at 5:15 AM, Bin Meng wrote:
> Currently there are two ethernet drivers (mvneta.c and mvpp2.c) that
> has netdev_### (eg: netdev_dbg) log macros defined in its own driver
> file. This adds these log macros in a common place linux/compat.h.
>
> Signed-off-by: Bin Meng
Acked-by
On Thu, Jul 26, 2018 at 4:39 AM, Bin Meng wrote:
> This syncs U-Boot's include/linux/mii.h with Linux kernel v4.17
> include/uapi/linux/mii.h.
>
> While we are here, this also fixes some style issues.
>
> Signed-off-by: Bin Meng
Acked-by: Joe Hershberger
On Thu, Jul 26, 2018 at 4:39 AM, Bin Meng wrote:
> This syncs U-Boot's include/linux/mdio.h with Linux kernel v4.17
> include/uapi/linux/mdio.h.
>
> Signed-off-by: Bin Meng
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https:/
On Tue, Jul 24, 2018 at 7:47 AM, Michal Simek wrote:
> Trivial Kconfig cleanup. Use tabs instead of spaces.
>
> Signed-off-by: Michal Simek
Reviewed-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Mon, Jul 23, 2018 at 8:55 AM, Michal Simek wrote:
> Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig
> entry should be separated by newline.
>
> Signed-off-by: Michal Simek
Reviewed-by: Joe Hershberger
___
U-Boot mailing list
U
On Mon, Jul 23, 2018 at 8:55 AM, Michal Simek wrote:
> CMD_DM is used for debug purpose and it shouldn't be enabled by default
> via Kconfig. Unfortunately this is in the tree for quite a long time
> that's why solution is to use imply DM for all targets which are
> enabling DM.
>
> Signed-off-by:
On Mon, Jul 23, 2018 at 8:55 AM, Michal Simek wrote:
> Another round of sorting Kconfig entries aplhabetically.
>
> Signed-off-by: Michal Simek
Reviewed-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-
Hi Tom,
All tests are passing: https://travis-ci.org/jhershbe/u-boot/builds/408198713
The following changes since commit 08fcdd332f3d6bc7842e21a97c80789d9233e147:
Makefile: Fix 'clean' target (2018-07-26 07:12:31 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-net.g
Hi Joe,
https://patchwork.ozlabs.org/patch/938298/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Joe,
https://patchwork.ozlabs.org/patch/938157/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
1 - 100 of 216 matches
Mail list logo
