On Sat, May 12, 2018 at 8:50 PM, Qwerty Chouskie
wrote:
> The defconfig for the 3 seems to work fine, except that for some reason
> Ethernet doesn't work (from what I understand, it is on the USB bus, though
> u-boot doesn't detect it?
>
> A quick google found some (maybe) useful files (e.g. the D
On Sun, Apr 15, 2018 at 12:37:11AM +0200, Marek Vasut wrote:
> From: Marek Vasut
>
> Drop all the extra content from the MMC core, so that tiny MMC support
> is really tiny, no fancy anything. That means the tiny MMC support does
> only 1-bit transfers at default speed settings. Moreover, this p
Hi,
On Thu, 10 May 2018 16:38:30 +0200
Heinrich Schuchardt wrote:
> If an exception occurs in a loaded image and the relocation offset is
> unknown, it is helful to know the instructions pointed to by the
> program counter. This patch adds the missing output.
>
> A possible output is:
> *pc
2018-05-13 4:17 GMT+09:00 Eugeniu Rosca :
>
> Hello Petr,
>
> On Sat, May 12, 2018 at 08:25:56PM +0200, Petr Vorel wrote:
>> Hi Eugeniu,
>>
>> > My testing was limited to:
>> > - make defconfig all
>> > - make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- r8a7795_ulcb_defconfig all
>> > - comparing .co
Hi Peter,
> The mx6_common.h file already defines BOUNCE_BUFFER so no need to
> definit it again in specific configs.
>
> Signed-off-by: Peter Robinson
> ---
> include/configs/advantech_dms-ba16.h | 1 -
> include/configs/apalis_imx6.h| 1 -
> include/configs/colibri_imx6.h | 1 -
On 05/13/2018 02:22 PM, Tuomas Tynkkynen wrote:
> Hi,
>
> On Thu, 10 May 2018 16:38:30 +0200
> Heinrich Schuchardt wrote:
>
>> If an exception occurs in a loaded image and the relocation offset is
>> unknown, it is helful to know the instructions pointed to by the
>> program counter. This patch
On Sat, 12 May 2018 05:49:47 +
Alex Kiernan wrote:
> Add a command to manipulate the bootcounter. This is useful if you can
> run device recovery from inside U-Boot and need to reset the
> bootcounter after executing that process as part of altbootcmd.
>
> Signed-off-by: Alex Kiernan
> ---
On 05/11/2018 07:53 PM, Evan Thompson wrote:
> On Fri, May 11, 2018 at 10:18 AM, Tom Rini wrote:
>> On Fri, May 11, 2018 at 10:14:38AM -0700, Evan Thompson wrote:
>>> On Thu, May 10, 2018 at 3:02 PM, Tom Rini wrote:
On Mon, Mar 26, 2018 at 04:05:24PM -0700, evan.g.thomp...@gmail.com wrote:
>
On 05/11/2018 07:47 AM, Jagan Teki wrote:
> Amarula A64 Relic is A64 based IoT device, which support
> - Allwinner A64 Cortex-A53
> - Mali-400MP2 GPU
> - AXP803 PMIC
> - 1GB DDR3 RAM
> - 8GB eMMC
> - AP6330 Wifi/BLE
> - MIPI-DSI
> - CSI: OV5640 sensor
> - USB OTG
> - 12V DC power supply
>
> Signed
On 03/28/2018 04:30 PM, Michal Simek wrote:
> From: Siva Durga Prasad Paladugu
>
> Xilfpga library expects the size of bitstream in a pointer
> but currenly we are passing the size as a value. This patch
> fixes this issue.
This breaks fpga loadb on zynqmp with FSBL 0.3 for me, so please revert.
On 05/11/2018 11:51 AM, Kunihiko Hayashi wrote:
> Add the new mode to indicate a built-in PHY.
> This will be used by UniPhier AVE ethernet driver.
Hi, Hayashi-san,
CC Joe on network stuff.
Reviewed-by: Marek Vasut
> Signed-off-by: Kunihiko Hayashi
> ---
> include/phy.h | 2 ++
> 1 file chan
Dear Marek,
Travis CI:
https://travis-ci.org/lmajewski/u-boot-dfu/builds/378387230
The following changes since commit
62d77cea31216cad526e5f45c88e8377efc6fcae:
mmc: Improve tinification (2018-05-13 07:57:32 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-dfu.git
On Sun, May 13, 2018 at 10:52:07PM +0900, Masahiro Yamada wrote:
> 2018-05-13 4:17 GMT+09:00 Eugeniu Rosca :
> > I wonder if Kconfig could avoid printing whitespace in command line
> > user dialogs. Then maybe those space characters could be removed from
> > the "*xpected_stdout" files.
>
>
> 'ma
>>
>>Please setup a test that can run in an environment without the
>>Internet. That is critical for unit tests.
>>
>>Hand tests for Internet usage and the environmental effects are great,
>>but that can't be what we include in the auto tests for repeat-ability
>>reasons. Simon is asking for a s
Hi,
On 14 May 2018 at 07:05, Duncan Hare wrote:
>
>
>
>
>>>
>>>Please setup a test that can run in an environment without the
>>>Internet. That is critical for unit tests.
>>>
>>>Hand tests for Internet usage and the environmental effects are great,
>>>but that ca
Hi Ramon,
On 12 May 2018 at 20:15, Ramon Fried wrote:
> Failure to set the clocks will causes data abort exception when
> trying to write to AHB uart registers.
> This patch ensures that we don't touch these registers if clock
> setting failed.
>
> Signed-off-by: Ramon Fried
> ---
> drivers/ser
On 12 May 2018 at 20:15, Ramon Fried wrote:
> Added TLMM pinctrl node for pin muxing & config.
> Additionally, added a serial node for uart.
>
> Signed-off-by: Ramon Fried
> ---
> arch/arm/dts/dragonboard410c.dts | 14 ++
> 1 file changed, 14 insertions(+)
>
Reviewed-by: Simon Glass
Hi Ramon,
On 12 May 2018 at 20:15, Ramon Fried wrote:
> The clock and serial nodes are needed before relocation.
> This patch ensures that the msm-serial driver will probe
> and provide uart output before relocation.
>
> Signed-off-by: Ramon Fried
> ---
> arch/arm/dts/dragonboard820c-uboot.dtsi
On 7 May 2018 at 06:26, Lukasz Majewski wrote:
> The struct dm_pmic_info's trans_len field stores the number of types to
> be transmitted per PMIC transfer.
>
> Signed-off-by: Lukasz Majewski
>
> ---
>
> Changes in v2:
> - New patch
>
> drivers/power/pmic/pmic-uclass.c | 10 ++
> include
On 12 May 2018 at 20:15, Ramon Fried wrote:
> The uart is already initialized prior to relocation,
> reinitialization after relocation is unnecessary.
>
> Signed-off-by: Ramon Fried
> ---
> drivers/serial/serial_msm.c | 4
> 1 file changed, 4 insertions(+)
Reviewed-by: Simon Glass
But pl
Hi Ramon,
On 12 May 2018 at 20:15, Ramon Fried wrote:
> This patch adds pinmux and pinctrl driver for TLMM
> subsystem in snapdragon chipsets.
> Currently, supporting only 8016, but implementation is
> generic and 8096 can be added easily.
>
> Driver is using the generic dt-bindings and doesn't
>
On 13 May 2018 at 03:13, Eugeniu Rosca wrote:
> From: Rob Herring
>
> Pickup the fix for handling unresolved phandles in overlays.
>
> This adds the following commits from upstream:
>
> c1e55a5513e9 checks: fix handling of unresolved phandles for dts plugins
> f8872e29ce06 tests: Avoid 64-bit ari
Hi,
On 13 May 2018 at 03:13, Eugeniu Rosca wrote:
> From: Rob Herring
>
> This adds the following commits from upstream:
>
> aadd0b65c987 checks: centralize printing of property names in failure messages
> 88960e398907 checks: centralize printing of node path in check_msg
> f1879e1a50eb Add limi
On 7 May 2018 at 06:25, Lukasz Majewski wrote:
> This patch adds definition of the number of bytes sent at once by the
> MC34708 PMIC.
>
> Signed-off-by: Lukasz Majewski
>
> ---
>
> Changes in v2:
> - None
>
> include/fsl_pmic.h | 1 +
> 1 file changed, 1 insertion(+)
Reviewed-by: Simon Glass
Hi Lukasz,
On 7 May 2018 at 06:26, Lukasz Majewski wrote:
> This commit provides support for transmissions larger than 1 byte for
> PMIC devices used with DM (e.g. MC34708 from NXP).
>
> Signed-off-by: Lukasz Majewski
>
> ---
>
> Changes in v2:
> - pmic_reg_* fixes to use uclass private structur
On 13 May 2018 at 03:13, Eugeniu Rosca wrote:
> After importing v4.17-rc1 Linux commit 9130ba884640 ("scripts/dtc:
> Update to upstream version v1.4.6-9-gaadd0b65c987"), sandbox build
> reports below warnings:
>
> arch/sandbox/dts/test.dtb: Warning (alias_paths): /aliases: aliases property
> name
On 7 May 2018 at 06:26, Lukasz Majewski wrote:
> Up till now it was only possible to use 'pmic' command with a single byte
> transmission.
> The pmic_read|write functions has been replaced with ones, which don't need
> the transmission length as a parameter.
>
> Due to that it is possible now to r
On 12 May 2018 at 20:15, Ramon Fried wrote:
> Serial port configuration was missing from previous implementation.
> It only worked because it was preconfigured by LK.
> This patch configures the uart for 115200 8N1.
> It also configures the pin mux for uart pins using DT bindings.
>
> Signed-off-b
On 8 May 2018 at 13:19, Ley Foon Tan wrote:
> Add code to reset all reset signals as in mmc DT node. A reset property is an
> optional feature,
> so only print out a warning and do not fail if a reset property is not
> present.
>
> If a reset property is discovered, then use it to deassert, thus
On 10 May 2018 at 18:24, Michal Simek wrote:
> This driver was tested on Xilinx ZynqMP SoC.
>
> Signed-off-by: Michal Simek
> ---
>
> Changes in v2:
> - Remove tabs from U_BOOT_DRIVER
>
> MAINTAINERS | 1 +
> drivers/timer/Kconfig | 7 +++
> drivers/timer/Makefile |
Hi Lukasz,
On 7 May 2018 at 06:26, Lukasz Majewski wrote:
> This change enables support for MC34708 PMIC in sandbox. Now we can
> emulate the I2C transfers larger than 1 byte.
>
> Notable changes for this driver:
>
> - From now on the register number is not equal to index in the buffer,
> which
On 8 May 2018 at 13:19, Ley Foon Tan wrote:
> Add code to reset all reset signals as in Ethernet DT node. A reset property
> is an optional feature,
> so only print out a warning and do not fail if a reset property is not
> present.
>
> If a reset property is discovered, then use it to deassert,
On 13 May 2018 at 08:22, Marek Vasut wrote:
> Just add IH_TYPE_STANDALONE to fit_get_image_type_property().
>
> Signed-off-by: Marek Vasut
> Cc: Pantelis Antoniou
> Cc: Simon Glass
> ---
> common/image-fit.c | 2 ++
> include/image.h| 1 +
> 2 files changed, 3 insertions(+)
>
Reviewed-by:
On 7 May 2018 at 06:26, Lukasz Majewski wrote:
> Following tests has been added for mc34708 device:
>
> - get_test for mc34708 PMIC
> - Check if proper number of registers is read
> - Check if default (emulated via i2c device) value is properly read
> - Check if value write/read operation is corre
On 13 May 2018 at 08:22, Marek Vasut wrote:
> Rename CONFIG_FIT_SPL_PRINT to CONFIG_SPL_FIT_PRINT and add Kconfig
> entry for it.
>
> Signed-off-by: Marek Vasut
> Cc: Pantelis Antoniou
> Cc: Simon Glass
> ---
> Kconfig| 6 ++
> README | 2 +-
> common/image-fit.c |
On 13 May 2018 at 08:22, Marek Vasut wrote:
> These functions may be needed in SPL, so add empty variants of them
> if CONFIG_SPL_FIT_PRINT is disabled.
>
> Signed-off-by: Marek Vasut
> Cc: Pantelis Antoniou
> Cc: Simon Glass
> ---
> common/image-fit.c | 4 +++-
> 1 file changed, 3 insertions(
Hi Lukasz,
On 7 May 2018 at 06:26, Lukasz Majewski wrote:
> This patch adds support for MC34708 PMIC, to be used with driver model
> (DM).
>
> Signed-off-by: Lukasz Majewski
>
> ---
>
> Changes in v2:
> - Support for uclass private data with trasfer length
>
> drivers/power/pmic/Kconfig | 7
On 7 May 2018 at 06:26, Lukasz Majewski wrote:
> The common code can be excluded to be reused by tests for other PMIC.
>
> Signed-off-by: Lukasz Majewski
>
> ---
>
> Changes in v2:
> - New patch
>
> test/dm/pmic.c | 12 ++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
Reviewed-by
On 13 May 2018 at 08:23, Marek Vasut wrote:
> Add support for loading U-Boot and optionally FDT from a fitImage
> in SPL by using the full fitImage support from U-Boot. While we do
> have limited SPL loading support in SPL with a small footprint, it
> is missing a lot of important features, like c
On 7 May 2018 at 06:26, Lukasz Majewski wrote:
> This MC34708 PMIC is somewhat special - it used single transfers (R/W) with
> 3 bytes size - up till now u-boot's PMICs only used 1 byte.
U-Boot's
>
> Signed-off-by: Lukasz Majewski
>
> ---
>
> Changes in v2:
> - New patch
>
> configs/sandbox_de
On 7 May 2018 at 06:26, Lukasz Majewski wrote:
> This commit also provides the default values of the emulated MC34708 PMIC
> internal registers content.
>
> Signed-off-by: Lukasz Majewski
>
> ---
>
> Changes in v2:
> - New patch
>
> arch/sandbox/dts/sandbox.dts | 4
> arch/sandbox/dt
Hi Simon,
On Mon, May 14, 2018 at 08:00:40AM +1000, Simon Glass wrote:
> Hi,
>
> On 13 May 2018 at 03:13, Eugeniu Rosca wrote:
> > From: Rob Herring
> >
> > This adds the following commits from upstream:
> >
> > aadd0b65c987 checks: centralize printing of property names in failure
> > messages
On 05/13/2018 09:24 PM, Lukasz Majewski wrote:
> Dear Marek,
>
>
> Travis CI:
> https://travis-ci.org/lmajewski/u-boot-dfu/builds/378387230
>
> The following changes since commit
> 62d77cea31216cad526e5f45c88e8377efc6fcae:
>
> mmc: Improve tinification (2018-05-13 07:57:32 -0400)
>
> are ava
On 05/14/2018 12:02 AM, Simon Glass wrote:
> On 13 May 2018 at 08:23, Marek Vasut wrote:
>> Add support for loading U-Boot and optionally FDT from a fitImage
>> in SPL by using the full fitImage support from U-Boot. While we do
>> have limited SPL loading support in SPL with a small footprint, it
44 matches
Mail list logo
