Add and share the the MTD partition scheme with kernel by defualt bootargs.
And add the "mtdparts" env.
Signed-off-by: Wenbin Song
---
include/configs/ls1043a_common.h | 22 --
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/include/configs/ls1043a_common.h b/i
As part of Chain of Trust for Secure boot, the SPL U-Boot will validate
the next level U-boot image. Add a new function spl_validate_uboot to
perform the validation.
Enable hardware crypto operations in SPL using SEC block.
In case of Secure Boot, PAMU is not bypassed. For allowing SEC block
acces
Hi all,
I found a problem with load command on ARM based board. When I load hello_world
standalone application using filesystem load command, the u-boot crashes.
Loading with loads is OK.
I think that the problem is caused by cache inconsistency. If I add calling the
flush_cache function, probl
There is only one flash bank for ls1043aqds.
Signed-off-by: Wenbin Song
---
include/configs/ls1043aqds.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 7b99d36..7c19122 100644
--- a/include/configs/ls1043aqds.h
For mpc85xx SoCs, the core begins execution from address 0xFFFC.
In non-secure boot scenario from NAND, this address will map to CPC
configured as SRAM. But in case of secure boot, this default address
always maps to IBR (Internal Boot ROM).
The IBR code requires that the bootloader(U-boot) mus
On Fri, Apr 01, 2016 at 11:50:24PM +0300, Sam Protsenko wrote:
> Hi All,
>
> Since we are moving config options from include/configs/* to Kconfigs
> and defconfigs, we can't do #ifdefs anymore. Example: in
> include/configs/am43xx_evm.h you can see next code:
>
> #if !defined(CONFIG_SPL_BUILD) |
On Fri, Apr 01, 2016 at 09:14:14PM -0600, Stephen Warren wrote:
> There are ARM SoCs (such as the BCM2837) do not contain an ARM GIC. Fix
> the ARMv8 CPU startup code to compile in this case.
>
> Signed-off-by: Stephen Warren
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital
On Fri, Apr 01, 2016 at 09:14:15PM -0600, Stephen Warren wrote:
> On all Pis so far, the VC FW provides a short stub to set up the ARM CPU
> before entering the kernel (a/k/a U-Boot for us). This feature is not
> currently supported by the VC FW when booting in 64-bit mode. However,
> this feature
On Fri, Apr 01, 2016 at 09:38:04PM -0600, Stephen Warren wrote:
> Add notes re: enabling the UART to the RPi 3 32-bit help text. Fully
> describe the RPi 3 64-bit board option.
>
> Signed-off-by: Stephen Warren
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
_
On 04/01/2016 04:41 PM, Tom Rini wrote:
> On Fri, Apr 01, 2016 at 04:16:42PM -0700, Eric Nelson wrote:
>> Hi Stephen,
>>
>> On 04/01/2016 03:57 PM, Stephen Warren wrote:
>>> On 03/31/2016 02:24 PM, Eric Nelson wrote:
On 03/30/2016 02:57 PM, Stephen Warren wrote:
> On 03/30/2016 11:34 AM, E
Hi Tom,
On 04/01/2016 06:59 PM, Tom Rini wrote:
> On Mon, Mar 28, 2016 at 10:05:44AM -0700, Eric Nelson wrote:
>
>> Add a block device cache to speed up repeated reads of block devices by
>> various filesystems.
>>
>> This small amount of cache can dramatically speed up filesystem
>> operations b
Hi Stephen,
On 04/01/2016 07:07 PM, Stephen Warren wrote:
> On 04/01/2016 05:16 PM, Eric Nelson wrote:
>> On 04/01/2016 03:57 PM, Stephen Warren wrote:
>>> On 03/31/2016 02:24 PM, Eric Nelson wrote:
On 03/30/2016 02:57 PM, Stephen Warren wrote:
> On 03/30/2016 11:34 AM, Eric Nelson wrote:
This set of updates addresses a number of small coding style
issues caught by Stephen Warren's review of the block cache
patch set.
Eric Nelson (3):
cmd: blkcache: remove indentation from output of 'show'
cmd: blkcache: simplify sub-command handling
drivers: block: formatting: fix placement
Signed-off-by: Eric Nelson
---
include/blk.h | 34 ++
1 file changed, 14 insertions(+), 20 deletions(-)
diff --git a/include/blk.h b/include/blk.h
index 263a791..f624671 100644
--- a/include/blk.h
+++ b/include/blk.h
@@ -96,10 +96,9 @@ struct blk_desc {
*
* @
Signed-off-by: Eric Nelson
---
cmd/blkcache.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/cmd/blkcache.c b/cmd/blkcache.c
index 725163a..d97bed5 100644
--- a/cmd/blkcache.c
+++ b/cmd/blkcache.c
@@ -16,11 +16,11 @@ static int blkc_show(cmd_tbl_t *cmdtp, int flag,
Signed-off-by: Eric Nelson
---
cmd/blkcache.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/cmd/blkcache.c b/cmd/blkcache.c
index d97bed5..1338dbd 100644
--- a/cmd/blkcache.c
+++ b/cmd/blkcache.c
@@ -73,12 +73,10 @@ static int do_blkcache(cmd_tbl_t *cmdtp, int flag,
From: Fabio Estevam
It is clearer to specify the full path to access the
doc/README.video file.
Signed-off-by: Fabio Estevam
---
README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/README b/README
index 4fec467..1dd7ab7 100644
--- a/README
+++ b/README
@@ -1802,7 +1802,
Hi Peng,
On 04/01/2016 10:46 PM, Peng Fan wrote:
> On Thu, Mar 31, 2016 at 01:41:04PM -0700, Eric Nelson wrote:
>> On 03/28/2016 09:57 PM, Peng Fan wrote:
>>> On Fri, Mar 25, 2016 at 01:12:11PM -0700, Eric Nelson wrote:
Device tree parsing of GPIO nodes is currently ignoring flags.
musb_lowlevelinit(): if no device is plugged in / detected call
musb_stop() to undo the preceding musb_start() call.
Signed-off-by: Hans de Goede
---
drivers/usb/musb-new/musb_uboot.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/musb-new/musb_uboot.c
b/driv
Some usb hosts may have failed to probe on "usb start", i.e. an otg
host without an otg-host cable plugged in.
"usb tree" would cause the probe method of these hosts to get called
again, something which should only happen on "usb reset".
This commit fixes this.
Signed-off-by: Hans de Goede
---
The probe function of the musb host driver can be called multiple
times. The code assumes that it can safe the pointer to the allocated
musb struct in the driver model priv_auto_alloc data, but this data
gets free-ed on a probe failure or on removal, so we must safe the
pointer elsewhere.
Signed-o
On Sun, 31 Jan 2016 21:37:04 +0100, Albert ARIBAUD
wrote:
> Revert commit b352182a and complete generic board support.
>
> Signed-off-by: Albert ARIBAUD
> ---
> arch/arm/mach-kirkwood/Kconfig | 4 +
> board/LaCie/wireless_space/Kconfig | 12 ++
> board/LaCie/wireless_s
> "Hans" == Hans de Goede writes:
> The probe function of the musb host driver can be called multiple
> times. The code assumes that it can safe the pointer to the allocated
> musb struct in the driver model priv_auto_alloc data, but this data
> gets free-ed on a probe failure or on remov
Some boards have on board usb devices which need longer then the USB
spec's 1 second to connect from board powerup. Add a config option which
when non 0 adds an extra delay before the first usb bus scan.
Signed-off-by: Hans de Goede
---
arch/arm/mach-sunxi/usb_phy.c | 7 +++
board/sunxi/Kcon
This is the value used in the fex file of the manufacturer images,
and also the DCDC1 default. Sometimes lower values are used to save
battery power, but that does not apply to a SBC.
Signed-off-by: Hans de Goede
---
configs/Sinovoip_BPI_M3_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --
DLDO3 is used to provide Port-D power and PD is used for the
usb-hub / sata-5v enable pins. The 2.5V comes from the schematic
and matches the factory image fex file.
Signed-off-by: Hans de Goede
---
arch/arm/dts/sun8i-a83t-sinovoip-bpi-m3.dts | 8
configs/Sinovoip_BPI_M3_defconfig
On Sat, Apr 2, 2016 at 4:00 PM, Tom Rini wrote:
> On Fri, Apr 01, 2016 at 11:50:24PM +0300, Sam Protsenko wrote:
>
>> Hi All,
>>
>> Since we are moving config options from include/configs/* to Kconfigs
>> and defconfigs, we can't do #ifdefs anymore. Example: in
>> include/configs/am43xx_evm.h you
Hi,
On 04/02/2016 12:22 AM, Marek Vasut wrote:
On 03/15/2016 01:59 PM, Stefan Roese wrote:
This patch changes the USB port scanning procedure and timeout
handling in the following ways:
a)
The power-on delay in usb_hub_power_on() is now reduced to a value of
max(100ms, "hub->desc.bPwrOn2PwrGoo
Hi,
On 04/02/2016 08:57 PM, Peter Korsgaard wrote:
"Hans" == Hans de Goede writes:
> The probe function of the musb host driver can be called multiple
> times. The code assumes that it can safe the pointer to the allocated
> musb struct in the driver model priv_auto_alloc data, but this
Hi,
On 04/02/2016 08:27 PM, Karsten Merker wrote:
On Fri, Apr 01, 2016 at 01:00:16PM -0400, Tom Rini wrote:
On Fri, Apr 01, 2016 at 01:38:13PM +0200, Hans de Goede wrote:
Hi Tom,
Here is a sunxi pull-req for v2016.05, it contains:
- A few bugfixes, including a fix for the gigabit
etherne
Some usb hosts may have failed to probe on "usb start", i.e. an otg
host without an otg-host cable plugged in.
"usb tree" would cause the probe method of these hosts to get called
again, something which should only happen on "usb reset".
This commit fixes this.
Signed-off-by: Hans de Goede
---
On 03/17/2016 01:35 PM, Wills Wang wrote:
>
>
> On Thursday, March 17, 2016 08:20 PM, Marek Vasut wrote:
>> On 03/17/2016 05:02 AM, Wills Wang wrote:
>>>
>>> On Thursday, March 17, 2016 11:44 AM, Marek Vasut wrote:
On 03/17/2016 04:39 AM, Wills Wang wrote:
> On Thursday, March 17, 2016 0
From: Stoica Cosmin-Stefan
The Linflex module is integrated on some NXP automotive SoCs part of the former
Freescale portfolio, like S32V234, an SoC for Advanced Driver Assistance
Systems.
Signed-off-by: Stoica Cosmin-Stefan
Signed-off-by: Chircu Bogdan
Signed-off-by: Depons Eric
Signed-off-b
On Mon, Mar 21, 2016 at 08:29:07PM +0100, Karsten Merker wrote:
> The RTL8211B_driver structure in drivers/net/phy/realtek.c contains a
> wrong PHY ID (0x1cc910 instead of 0x1cc912) in the uid field.
>
> The lowest four bits of the PHY ID encode the chip revision (B+C/D/E/F)
> of the RTL8211 and
On Sat, Apr 02, 2016 at 11:42:55PM +0200, Hans de Goede wrote:
> Hi,
>
> On 04/02/2016 08:27 PM, Karsten Merker wrote:
> >On Fri, Apr 01, 2016 at 01:00:16PM -0400, Tom Rini wrote:
> >>On Fri, Apr 01, 2016 at 01:38:13PM +0200, Hans de Goede wrote:
> >>
> >>>Hi Tom,
> >>>
> >>>Here is a sunxi pull-r
On 04/02/2016 07:26 AM, Tom Rini wrote:
On Fri, Apr 01, 2016 at 09:14:15PM -0600, Stephen Warren wrote:
On all Pis so far, the VC FW provides a short stub to set up the ARM CPU
before entering the kernel (a/k/a U-Boot for us). This feature is not
currently supported by the VC FW when booting in
On 04/02/2016 09:13 AM, Eric Nelson wrote:
Hi Peng,
On 04/01/2016 10:46 PM, Peng Fan wrote:
On Thu, Mar 31, 2016 at 01:41:04PM -0700, Eric Nelson wrote:
On 03/28/2016 09:57 PM, Peng Fan wrote:
On Fri, Mar 25, 2016 at 01:12:11PM -0700, Eric Nelson wrote:
Device tree parsing of GPIO nodes is c
Now that rpi_*defconfig and Kconfig rather than the config header file,
provide the identify of the build, we don't need to separate config
headers and board directories for each RPi variant. Set CONFIG_SYS_BOARD
and CONFIG_SYS_CONFIG_NAME so that we can get rid of the duplication. This
requires a
38 matches
Mail list logo
