Hi Vincent,
On Tue, Jul 24, 2012 at 6:12 PM, Vincent Palatin wrote:
> When a USB configuration descriptor was larger than our USB buffer
> (512 bytes), we were skipping the full descriptor reading but then we
> were still parsing and using it, triggering memory corruptions.
> Now in that case, it
On 24/07/2012 22:11, Joe Hershberger wrote:
> Previously u-boot would initialize the network interface for every
> network operation and then shut it down again. This makes sense for
> most operations where the network in not known to be needed soon after
> the operation is complete. In the case
Wolfgang wrote...
> > A revised version of the spec (sorry, I would have used reply-to but
> > something went amiss with gmail and I've lost the original)
>
> http://www.denx.de/wiki/U-Boot/ToolsPatchTracking updated.
I have been and had a look at the specification that you have posted and am
Dear Andy,
In message <004e01cd6a51$57d5ff70$0781fe50$@p...@sdcsystems.com> you wrote:
>
> I have been and had a look at the specification that you have posted and am
> happy to get my hands dirty helping with implement and test this.
Thanks in advance.
> I know that a good proportion (possib
ccng'g to minkyu
On 25 July 2012 17:07, Subash Patel wrote:
> Hi Chander,
>
> Do you or Minku or someone in SLSI maintain mainline u-boot for old SoC's
> like S3C24XX?
> Your answer may be useful to Jose.
>
> Regards,
> Subash
>
>
> On 07/25/2012 04:42 PM, José Miguel Gonçalves wrote:
>>
>> Hi Su
Hi Wolfgang,
On Wed, Jul 25, 2012 at 9:00 PM, Wolfgang Denk wrote:
> Dear Andy,
>
> In message <004e01cd6a51$57d5ff70$0781fe50$@p...@sdcsystems.com> you wrote:
>>
>> I have been and had a look at the specification that you have posted and am
>> happy to get my hands dirty helping with implement a
Use the standard CMD_RET_* constants to clearly report errors from the
pca953x command. In addition, print error messages when I2C communication
fails.
Signed-off-by: Laurence Withers
---
drivers/gpio/pca953x.c | 49 ++-
1 files changed, 35 insertion
Signed-off-by: Laurence Withers
---
drivers/gpio/pca953x.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 359fdee..64c7797 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -287,7 +287,7 @@ U_BOOT_C
Hi Marek,
On 05/02/2012 12:09 AM, Marek Vasut wrote:
From: Marek Vasut
Signed-off-by: Marek Vasut
Cc: Detlev Zundel
Cc: Fabio Estevam
Cc: Stefano Babic
Cc: Wolfgang Denk
---
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 100 +++---
1 file changed, 92 insertions(+)
On 07/25/2012 05:17 PM, Lauri Hintsala wrote:
Hi Marek,
On 05/02/2012 12:09 AM, Marek Vasut wrote:
From: Marek Vasut
Signed-off-by: Marek Vasut
Cc: Detlev Zundel
Cc: Fabio Estevam
Cc: Stefano Babic
Cc: Wolfgang Denk
---
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 100
++
Hi,
We have a numonyx spi flash (N25Q128) on my target.
I tried using u-boot stmicro.c driver as numonyx and stmicro have same
manufacturing ID's.
The driver detects M25P128 as below ID table
{
.idcode1 = 0x18,
.page_size = 256,
.pages_per_sector
On Tuesday 24 July 2012 15:38:55 Horst Kronstorfer wrote:
> On 07/24/2012 05:28 PM, Mike Frysinger wrote:
> > On Tuesday 24 July 2012 06:11:04 Horst Kronstorfer wrote:
> >> On 07/19/2012 05:22 AM, Mike Frysinger wrote:
> >>> On Friday 13 July 2012 09:03:40 Horst Kronstorfer wrote:
> Add '-unde
On Tuesday 24 July 2012 16:10:56 Joe Hershberger wrote:
> --- a/drivers/net/netconsole.c
> +++ b/drivers/net/netconsole.c
>
> -static char input_buffer[512];
> +#ifdef CONFIG_NETCONSOLE_BUFFER_SIZE
> +#define BUFFER_SIZE CONFIG_NETCONSOLE_BUFFER_SIZE
> +#else
> +#define BUFFER_SIZE 512
> +#endif
>
On Tuesday 24 July 2012 16:11:05 Joe Hershberger wrote:
> --- a/tools/netconsole
> +++ b/tools/netconsole
>
> +board_in_port=${3:-$board_out_port}
board_in_port=${3:-${board_out_port}}
> +echo Board out port: $board_out_port
> +echo Board in port: $board_in_port
echo "Board out port: ${board_ou
Size of the SDRAM chips might differ between any two (otherwise
identical) instances of the same board.
So add a function kw_sdram_size_adjust() which reads out the current
ram size for a given bank, and adjusts the Kirkwood's SDRAM window size
register accordingly.
Signed-off-by: Gerlando Falaut
From: Holger Brunck
Some boards may differ only in the SDRAM size. This function allows to
fix the size accordingly and we can use the same u-boot binary for both
boards.
Signed-off-by: Holger Brunck
Signed-off-by: Gerlando Falauto
cc: Prafulla Wadaskar
cc: Valentin Longchamp
---
changes for
Hey everyone,
I'm trying to find the structure of the binary file header that's created
after the u-boot compilation.
For example, I already found several informations about the image header
structure, and I know that a file u-boot.im is actually the file u-boot.bin
with an extra header of 64byte
Hi Joe,
On Wed, Jul 25, 2012 at 3:29 AM, Joe Hershberger
wrote:
>
> > +#define put_vci(e, str)\
> > + do {\
> > + *e++ = 60; \
>
>
> Please keep the comment on the magic number.
>
Sure.
On Tuesday 24 July 2012 16:11:15 Joe Hershberger wrote:
> --- a/drivers/net/netconsole.c
> +++ b/drivers/net/netconsole.c
> @@ -131,8 +131,17 @@ static void nc_send_packet(const char *buf, int len)
> }
>
> if (eth->state != ETH_STATE_ACTIVE) {
> - if (eth_init(gd->bd) < 0)
Dear Lauri Hintsala,
> On 07/25/2012 05:17 PM, Lauri Hintsala wrote:
> > Hi Marek,
> >
> > On 05/02/2012 12:09 AM, Marek Vasut wrote:
> >> From: Marek Vasut
> >>
> >> Signed-off-by: Marek Vasut
> >> Cc: Detlev Zundel
> >> Cc: Fabio Estevam
> >> Cc: Stefano Babic
> >> Cc: Wolfgang Denk
> >>
On Mon, Jul 23, 2012 at 08:16:12AM +0200, Wolfgang Denk wrote:
[snip]
> Running a full MAKEALL for all architectures and boards, for all
> (> 40) repositories, every 24 hours, requires more CPU and I/O cycles
> that we can currently afford.
MAKEALL is indeed consuming. But I wanted to follow up
Dear alex,
> Hi:
> I find that mx28_powerdown function can't power down mx28, and continue
> to load kernel I don't know whether this issue is on your side. My
> board is changed frommx28evk. Was mx28_powerdown function tested? Best
I think this question was here already.
What do you expe
The SET_PCI_LIODN() macro takes a compatible property string as a parameter, so
that it knows
which PCI device tree node to look for. The calls to these macros are using a
hard-coded string,
but we already have the CONFIG_SYS_FSL_PCIE_COMPAT macro which contains the
same string, so we
should us
The poweroff function in kernel can work. The similar code can be found in
bootlet from FSL, and it also can work . After poweroff the system, press
pswitch key and the board can startup.
At 2012-07-26 04:42:28,"Marek Vasut" wrote:
>Dear alex,
>
>> Hi:
>> I find that mx28_powerdown functio
Hi,
This patch-set need to merge for Exynos.
Maybe didn't work eMMC at Exynos board in now.
Best Regards,
Jaehoon Chung
On 07/20/2012 01:59 PM, Jaehoon Chung wrote:
> To use SDHCI for Samsung-SoC, Some problem is fixed.
> See the below mmcinfo message:
>
> 1. eMMC card:
> Device: SAMSUNG SDHCI
From: Tetsuyuki Kobayashi
Hi, Iwamatsu-san
These are minor bug fixes for kzm9g board.
Tetsuyuki Kobayashi (4):
arm: rmobile: kzm9g: add NFS_TIMEOUT in config file
arm: rmobile: kzm9g: remove unrelated config
arm: rmobile: kzm9g: fix CPU info
arm: rmobile: kzm9g: separate cpu_rev to inte
From: Tetsuyuki Kobayashi
According to SoC document, revision info is separated to integer part and
fracton part. So I separete rmobile_get_cpu_rev() to
rmobile_get_cpu_rev_integer() and rmobile_get_cpu_rev_fraction().
Signed-off-by: Tetsuyuki Kobayashi
---
arch/arm/cpu/armv7/rmobile/cpu_inf
From: Tetsuyuki Kobayashi
Set NFS_TIMEOUT to 10,000 msec.
Signed-off-by: Tetsuyuki Kobayashi
---
This patch needs "net: nfs: make NFS_TIMEOUT configurable", which is applied in
u-boot-master next branch, to take effect.
include/configs/kzm9g.h |1 +
1 file changed, 1 insertion(+)
diff -
From: Tetsuyuki Kobayashi
CPU info register was read wrongly by mistake. And function
rmobile_get_cpu_rev() was not called properly.
Signed-off-by: Tetsuyuki Kobayashi
---
arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c |6 +++---
arch/arm/cpu/armv7/rmobile/cpu_info.c|2 +-
2 fil
From: Tetsuyuki Kobayashi
Remove CONFIG_INTEGRATOR and CONFIG_ARCH_CINTEGRATOR. These are not for kzm9g.
Signed-off-by: Tetsuyuki Kobayashi
---
include/configs/kzm9g.h |2 --
1 file changed, 2 deletions(-)
diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h
index a4d2c37..bc6dc
30 matches
Mail list logo
