This is a patch-series I intend to apply to the x86 repository ready for
the next merge window.
Patches 1 & 2 are fixes for build breakages caused by non-x86 mainline
patches
Patch 3 fixes a cold-boot breakage
Patch 4 removes unmaintained boards
Patch 5 Is a trivial change suggested by Heiko Sc
Commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934 made the argv parameter
to do_go_exec() const but did not allow for the fact that argv[-1] is
set to point to the global data structure and relies on argv being non-
const.
With this patch, do_go_exec() creates a new copy of the argv array with
an ex
x86 failed to compile with a message "a case for this architecture does
not exist!" - Add do_bdinfo() for this arch
Signed-off-by: Graeme Russ
---
common/cmd_bdinfo.c | 48 +---
1 files changed, 45 insertions(+), 3 deletions(-)
diff --git a/common/c
Commit 077e1958ca4afe12d88043b123ded058c51b89f7 broke the ability of the
x86 port to boot from a cold-reset by removing the initial IDT. Re-
instate the initial IDT to allow cold-booting of x86 boards
Signed-off-by: Graeme Russ
---
arch/i386/cpu/start16.S |5 +
1 files changed, 5 inserti
Use TEXT_BASE rather than a hard-coded base address on x86 linker scripts.
This will allow any board to define its base link address without having
to modify the linker script
Signed-off-by: Graeme Russ
---
board/eNET/u-boot.lds |8
1 files changed, 4 insertions(+), 4 deletions(-)
Follow the discussion of Charles Manning and Mike Frysinger.
Using gc_sections helps reduce image size.
Signed-off-by: Graeme Russ
---
arch/i386/config.mk |3 +++
board/eNET/u-boot.lds | 10 +-
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/i386/config.mk b/a
Linux has C macros and code to load the GTD after switching to Protected
Mode. Using these greatly simplifies the assembler code
Signed-off-by: Graeme Russ
---
arch/i386/cpu/cpu.c | 57 +
arch/i386/cpu/start.S | 96 ---
This patch allows configuration of the eNET board for generation of a
U-Boot image which can be loaded into RAM (using tftp for example).
Executing the image loaded into RAM is very similar to a cold-boot (the
image is relocated to upper memory etc). This allows very rapid development
and testing o
The SC520 has an inbuilt MC146818 - Enable it for the eNET board
Signed-off-by: Graeme Russ
---
drivers/rtc/mc146818.c |6 ++
include/configs/eNET.h |2 ++
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index ac4eb6a..15
The header of recent Linux Kernels includes the size of the image, and
therefore is not needed to be passed to zboot. Still process the third
parameter (size of image) in the event that an older kernel is being loaded
Signed-off-by: Graeme Russ
---
arch/i386/lib/zimage.c | 18 +
Perform some basic code cleanups of the x86 files
Signed-off-by: Graeme Russ
---
arch/i386/cpu/sc520/sc520.c | 54 ++--
arch/i386/cpu/sc520/sc520_asm.S | 642 +++
arch/i386/cpu/start.S | 30 +-
arch/i386/cpu/start16.S |9 +-
4 fi
Relocation is not board-specific fir the x86 architectrure, so
CONFIG_RELOC_FIXUP_WORKS can be defined globally in the common.h
Signed-off-by: Graeme Russ
---
arch/i386/include/asm/config.h |2 ++
include/configs/eNET.h |2 --
2 files changed, 2 insertions(+), 2 deletions(-)
dif
Fix minor issues with the configuration of the hardware interrupts for
Linux when booting the eNET board
Signed-off-by: Graeme Russ
---
board/eNET/eNET.c | 15 +--
1 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c
index 7f0e257..70
On Sat, Aug 21, 2010 at 11:42:31AM +1000, Graeme Russ wrote:
> It sounds like you might be looking at using U-Boot for booting a x86
> PC. If this is the case, maybe you should take a look at coreboot
> (http://www.coreboot.org/)
For what it's worth: we have a beginning of x86 support in Barebox
Hi Joakim,
On Wednesday, August 18, 2010, Joakim Tjernlund
wrote:
>>
>> On Wed, 11 Aug 2010 11:44:21 +0200
>> Joakim Tjernlund wrote:
>>
>> > uec_init() adds an udelay(10) even though
>> > the PHY status read went well, don't do that.
>> >
>> > Signed-off-by: Joakim Tjernlund
>> > ---
>> Ac
Hello Ben,
Ben Gardiner wrote:
> Split the existing dram_init for da8xx when ARM reloc is enabled, like the
> changes to arch/arm/cpu/arm926ejs/orion5x/dram.c in
> 0f234d263b17ccf1b8fd776eb8c15b7cdb27a887 by Heiko Schocher .
>
> Without these changes gd->ram_size is '0' which leads to incorrect r
Hallo Wolfgang,
Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk
> Cc: Heiko Schocher
> Cc: Stefan Roese
> Cc: Roderik Wildenburg
Acked-by: Heiko Schocher
Thanks.
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5,
Hello Wolfgang,
The following changes since commit bd2313078114c4b44c4a5ce149af43bcb7fc8854:
Wolfgang Denk (1):
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Nishanth Menon (3):
i
Dear Craig Nauman,
On 20 August 2010 01:39, C Nauman wrote:
> What is the status of support for the samsung s3c2440 in mainline u-boot?
>
> I have seen patches in the the mailing list archive from 2009 but they
> don't appear to have been applied yet.
>
I remember that Kevin was working on it.
B
On 20 August 2010 14:11, Minkyu Kang wrote:
> This patch adds basic support for s5pc210.
> s5p-common will be used by all of s5p SoCs.
>
> Signed-off-by: Minkyu Kang
> Signed-off-by: Kyungmin Park
> ---
> v2: no change
>
> Makefile | 7 +
> arch/arm/cpu/armv7/
On 20 August 2010 14:11, Minkyu Kang wrote:
> Because of these are common files around s5p Socs, rename from s5pc1xx to s5p.
> And getting cpu_id is SoC specific, so move to SoC's header file.
>
> Signed-off-by: Minkyu Kang
> Signed-off-by: Kyungmin Park
> ---
> v2: moves read funcion also to s5
On 20 August 2010 18:12, Minkyu Kang wrote:
> This patch fixed the size of mmc structure.
>
> Signed-off-by: Minkyu Kang
> ---
> arch/arm/include/asm/arch-s5pc1xx/mmc.h | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
applied to u-boot-samsung
--
from. prom.
www.promsoft.net
___
Hello Stephan,
added Ben Warren to cc: because this is a change in net,
which also falls in his area of responsibility ...
Stephan Linz wrote:
> This patch switches to the desired I2C bus when the SNTP
> network service is called. This can be configured using the
> CONFIG_SYS_RTC_BUS_NUM define.
Hello Graeme,
Graeme Russ wrote:
> Relocation is not board-specific fir the x86 architectrure, so
> CONFIG_RELOC_FIXUP_WORKS can be defined globally in the common.h
>
> Signed-off-by: Graeme Russ
Acked-by: Heiko Schocher
> ---
> arch/i386/include/asm/config.h |2 ++
> include/configs/eNET
24 matches
Mail list logo
