Re: OrangePI Zero3 memory timing testing

2023-11-29 Thread Siarhei Siamashka
the Zunlong image on occasion and it consistently shows 1G > > and from my poking around I think it runs at a 792 clk. > > > > > > Console output with DRAM default: > > > > U-Boot 2024.01-rc3-00028-g43f2873fa9-dirty (Nov 28 2023 - 22:46:39 > > -0800) Allwi

Re: OrangePI Zero3 memory timing testing

2023-11-29 Thread Andre Przywara
I think it runs at a 792 clk. Console output with DRAM default: U-Boot 2024.01-rc3-00028-g43f2873fa9-dirty (Nov 28 2023 - 22:46:39 -0800) Allwinner Technology CPU:   Allwinner H616 (SUN50I) Model: OrangePi Zero3 DRAM:  2 GiB Last login: Wed Nov 29 09:35:15 PST 2023 on ttyS0 root@orangepizero3:

OrangePI Zero3 memory timing testing

2023-11-29 Thread Stephen Graf
runs at a 792 clk. Console output with DRAM default: U-Boot 2024.01-rc3-00028-g43f2873fa9-dirty (Nov 28 2023 - 22:46:39 -0800) Allwinner Technology CPU: Allwinner H616 (SUN50I) Model: OrangePi Zero3 DRAM: 2 GiB Last login: Wed Nov 29 09:35:15 PST 2023 on ttyS0 root@orangepizero3:~# free -h

Re: orangepi zero3

2023-11-25 Thread Mikhail Kalashnikov
ilt : 18:07:18, Nov 23 2023 NOTICE:  BL31: Detected Allwinner H616 SoC (1823) NOTICE:  BL31: Found U-Boot DTB at 0x4a0b2750, model: OrangePi Zero3 INFO:    ARM GICv2 driver initialized INFO:    Configuring SPC Controller INFO:    PMIC: Probing AXP305 on RSB ERROR:   RSB: set run-time address

Re: orangepi zero3

2023-11-24 Thread Andre Przywara
ted Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB > at 0x4a0b2750, model: OrangePi Zero3 INFO: ARM GICv2 driver initialized > INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB > ERROR: RSB: set run-time address: 0x10003 INFO: Could not init RSB: >

Re: orangepi zero3

2023-11-24 Thread Stephen Graf
Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a0b2750, model: OrangePi Zero3 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB ERROR: RSB: set run-time address: 0x10003 INFO: Could not init RSB: -65539 INFO: BL31: Platform setup

Re: orangepi zero3

2023-11-23 Thread Andre Przywara
kernel.org/linux-sunxi/2303336.ElGaqSPkdT@jernej-laptop/T/#m77ee30923cb0351f2d701a463a940dc7c00fa8b7 Cheers, Andre > > Output from the patch defconfig (1Gb LAN): > > U-Boot SPL 2024.01-rc3-9-g9e53e45292-dirty (Nov 23 2023 - 18:08:24 > +) > DRAM: 2048 MiB > Trying to bo

Re: orangepi zero3

2023-11-23 Thread Andre Przywara
On Tue, 21 Nov 2023 21:52:12 -0800 Stephen Graf wrote: Hi Stephen, > I have been able to build a working (on my orangepi zero3 1G) u-boot for > the orangepi zero3 with the following defconfig. Would it be possible to thanks for your interest in contributing and for reaching out! As

Re: add orangepi zero3 to u-boot

2023-11-22 Thread Peter Robinson
Hi Stephen, > I have been able to build a working (tested on my orangepi zero3 1G) > u-boot for the orangepi zero3 with the following defconfig. Would it be > possible to add this config to the working boards. I would test it > again with an official build. The dtb/dts is in linux

add orangepi zero3 to u-boot

2023-11-22 Thread Stephen Graf
I have been able to build a working (tested on my orangepi zero3 1G) u-boot for the orangepi zero3 with the following defconfig. Would it be possible to add this config to the working boards.  I would test it again with an official build. The dtb/dts is in linux 6.6 and in u-boot. The H618

orangepi zero3

2023-11-22 Thread Stephen Graf
I have been able to build a working (on my orangepi zero3 1G) u-boot for the orangepi zero3 with the following defconfig. Would it be possible to add this config to the working boards.  I would test it again with an official build. The dtb/dts is in linux and in u-boot. The H618 processor is