Hi,
> On 17 Feb 2024, at 20:55, Jojan wrote:
>
> For RPi 5B you need bcm2712 device tree . RPi4 uses 2711.So the e
> rpi_arm64_confi does not work for RPi5
> Also make sure that you have the changes discussed here.[GIT PULL] rpi:
> updates for v2024.04 (mail-archive.com)
You don’t have to ch
Hi John,
Am 17.02.24 um 17:33 schrieb John:
I am running Arch ARM on a RPi4B and also on a RPi5B. My RPi4B can boot the
vanilla kernel package (linux-aarch64) with the latest uboot-raspberrypi
(2024.04-rc2) just fine.
btw the mainline kernel doesn't have any RPi 5 support yet. So you will
nee
You might get these build errorsError:arch/arm/dts/bcm283x-u-boot.dtsi:42.1-14
Label or path uart0_gpio14 not found
Error: arch/arm/dts/bcm283x-u-boot.dtsi:46.1-14 Label or path uart1_gpio14
notfound
I just Just commented out that.
On Saturday, February 17, 2024 at 11:17:12 AM PST, John
yes , I created new config by renaming ' rpi_arm64_config' to
rpi5_arm64_config.and edited the device tree to bcm2712-rpi-5-b.dtb. Then get
get the dts files from
linux/arch/arm/boot/dts/bcm2712-rpi-5-b.dts at rpi-6.1.y
)
It gets booted but still need more controllers( ethernet)
On Satu
For RPi 5B you need bcm2712 device tree . RPi4 uses 2711.So the e
rpi_arm64_confi does not work for RPi5
Also make sure that you have the changes discussed here.[GIT PULL] rpi:
updates for v2024.04 (mail-archive.com)
Iwas able to get the git
(https://source.denx.de/u-boot/custodians/u-boot-ra
Thank you for the steps. If the NIC is non-functional, I think I will wait for
official RPi5B support to come to u-boot.
On Saturday, February 17th, 2024 at 2:25 PM, Jojan wrote:
> yes , I created new config by renaming ' rpi_arm64_config' to
> rpi5_arm64_config.
> and edited the device tr
On Saturday, February 17th, 2024 at 1:55 PM, Jojan wrote:
> For RPi 5B you need bcm2712 device tree . RPi4 uses 2711.
> So the e rpi_arm64_confi does not work for RPi5
>
Which config target did you build or did you modify rpi_arm64_config? If so,
can you share the diff? You mentioned modif
On Sat, 17 Feb 2024 at 16:53, John wrote:
>
> I am running Arch ARM on a RPi4B and also on a RPi5B. My RPi4B can boot the
> vanilla kernel package (linux-aarch64) with the latest uboot-raspberrypi
> (2024.04-rc2) just fine. Yet, if I take that uSD card and place it in my
> RPi5B, it does not bo
8 matches
Mail list logo
