Re: [U-Boot] changing bootcmd environment

On 02/07/2013 12:08:19 AM, Ratheendran R wrote: Thanks Scott SD Card boot only to write firmware to NAND flash. *'And you should never use "nand scrub" in an automated way.' * what is better way of doing this, since I am using with an old uboot.. Just remove the scrub command and use normal e

Re: [U-Boot] changing bootcmd environment

Thanks Scott SD Card boot only to write firmware to NAND flash. *'And you should never use "nand scrub" in an automated way.' * what is better way of doing this, since I am using with an old uboot.. -Ratheendran On Thu, Feb 7, 2013 at 12:05 AM, Scott Wood wrote: > On 02/05/2013 10:25:41 PM, R

Re: [U-Boot] changing bootcmd environment

On 02/05/2013 10:25:41 PM, Ratheendran R wrote: Thanks Scott for your valuable feedback & suggestion. I am using the board which is uses SD Card boot & NAND boot options,SD CARD boot is used to write firmware to be NAND flash and used only to update the firmware to NAND. Every time you b

Re: [U-Boot] changing bootcmd environment

Thanks Scott for your valuable feedback & suggestion. I am using the board which is uses SD Card boot & NAND boot options,SD CARD boot is used to write firmware to be NAND flash and used only to update the firmware to NAND. MOVI command may be added by the board vendor to support SD CARD boot,cu

Re: [U-Boot] changing bootcmd environment

On 02/04/2013 10:54:52 PM, Ratheendran R wrote: Dear All, I am using u-boot given by our Samsung based s3c2416 board vendor which support SD CARD based boot,I am trying to change the boot command variable adding few more steps to it from the serial console. The problem is I am not able t

Re: [U-Boot] changing bootcmd environment

Hi Ratheendran, Can you tell us how much u-boot can store? Every time truncated at same location? Send me stored string . Regards, Ramesh -Original Message- From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Ratheendran R Sent: Tuesday, February 05,