Hi, Albert:
>But then, why change the board's original SYS_TEXT_BASE? Could you not
>just leave boards.cfg untouched, and only change the decompressed
>target address to 0x03F8?
>
Yes, just change the decompressed target address to 0x03F8 is also
ok!
Best wishes,
Hi tiger...@viatech.com.cn,
On Fri, 19 Jul 2013 17:25:46 +0800, wrote:
> Hi, Albert:
> Sorry!
> I made a mistake at before mail content!
> The correct setting is:
> I changed SYS_TEXT_BASE = 0x0800 in boards.cfg.
> I also changed the decompressed target address = SYS_TEXT_BASE = 0x0800
Hi tiger...@viatech.com.cn,
On Fri, 19 Jul 2013 14:59:47 +0800, wrote:
> Hi, Albert:
> I found new u-boot source code had some PIC related question.
> I succeeded to boot self-uncompressed u-boot.bin now.
>
> I reviewed self-uncompressed header code (similar with Linux kernel
> piggy header), f
Hi, Albert:
I found new u-boot source code had some PIC related question.
I succeeded to boot self-uncompressed u-boot.bin now.
I reviewed self-uncompressed header code (similar with Linux kernel
piggy header), found:
The header code would de-compress compressed uboot.bin to 0x 8000
dram locat
On 18/07/13 17:08, Wolfgang Denk wrote:
> Dear tiger...@viatech.com.cn,
>
> please stop top posting / full quoting.
>
>
> In message
> you wrote:
>>
>> My code base is based on u-boot-2013.04 .
>> I followed board\samsung\smdkc100\config.mk , and put it into my board
>> related directory.
>
>
Dear tiger...@viatech.com.cn,
In message you
wrote:
>
> >Yes, that would be the U-Boot way to implement it. It allows you to
> >reusse existing code instead of adding new methods.
>
> So, is there any example SPL code which contains uncompressed algorithm
> code?
No, none thaty I am aware of.
Dear Denk:
>Yes, that would be the U-Boot way to implement it. It allows you to
>reusse existing code instead of adding new methods.
So, is there any example SPL code which contains uncompressed algorithm
code?
Best wishes,
___
U-Boot mailing list
U-Bo
Dear tiger...@viatech.com.cn,
please stop top posting / full quoting.
In message you
wrote:
>
> My code base is based on u-boot-2013.04 .
> I followed board\samsung\smdkc100\config.mk , and put it into my board
> related directory.
You managed toi find a really bad example of code. This shou
Hi, Denk:
My code base is based on u-boot-2013.04 .
I followed board\samsung\smdkc100\config.mk , and put it into my board
related directory.
About SPL approach:
Did you suggest I put decompressed algorithm code into SPL code instead
of adding a self-uncompressed header?
Best wishes,
>In message
Dear tiger...@viatech.com.cn,
In message you
wrote:
>
> I configured "CONFIG_SYS_TEXT_BASE = 0x03F8" in config.mk when
> compiling u-boot source code.
this has been moved out of config.mk ages ago. How old is your U-Boot
version?
> The self-uncompressed code also put the uncompressed ima
Hi, Albert:
The DRAM address map is : 0 --- 0x1000 (256MB) on my ARM
development board.
I configured "CONFIG_SYS_TEXT_BASE = 0x03F8" in config.mk when
compiling u-boot source code.
The self-uncompressed code also put the uncompressed image at 0x03F8
Best wishes,
>On Wed, 17 Jul 20
Hi tiger...@viatech.com.cn,
On Wed, 17 Jul 2013 19:53:10 +0800, wrote:
> Hi, experts:
> Sorry!
> Not self-compressed, it is self-uncompressed !
> --
> I tried to add a self-uncompressed header in u-boot.bin on a Cortex-A9
> single core platform
Dear Zeyad A,
> Dear Marek Vasut,
> I have already done the CC, but the mail was rejected from u-boot mailing
> list because the message size is too large. So i am not doing it for now
> and I am sorry for the quoting of my reply. The matter is not so clear for
> me.
> Ok, I have done the command
Dear Zeyad A,
> Dear Mark,
> Yeah sure, I'll do the CC and what you mean by 'fix the quote in my
> mailer'??
When you reply on an email, you usually get the old email you reply to prefixed
with these ">" (quotes). And I guess your mailed doesn't do that.
> If my u-boot is broken then what will
Dear Zeyad A,
Ok, let's first adjust your posting so it's easier for everyone around to read
and reply. Firstly please, always CC the u-boot mailing list. Secondly, fix the
quoting in your mailer please.
> Thank you very much for your reply. Please read the my answers below..
>
> On Wed, Jun 6
Dear Zeyad A,
> Hello,
>
> Please help me to configure u-boot in my NC600 board.
What's this board? Is it supported mainline? What CPU does it have, what
version
of uboot etc?
> I have reached near
> to u-boot, but the kernel is not booting. After the kernel image upload via
> serial boot mod
16 matches
Mail list logo
