Re: [U-Boot] Problems booting without BDI

Hi Alemao, Ben's comment is in addition to my comment: >> The assignments for the 8349 are: >> >> CFG_RS[0:2] = LGPL[0, 1, 3] >> CFG_CLKIN_DIV = LGPL[5] >> These need to be setup to tell the processor to load from local bus flash, and then ... > To somewhat re-phrase what Dave mentioned, one co

Re: [U-Boot] Problems booting without BDI

David Hawkins wrote: > Hi Alemao, > > >> I made a port of u-boot for my board, with MPC8343. >> >> The problem is that when i run u-boot with the BDI2000 (using "reset run" >> command), u-boot loads normally, but when i take off the BDI nothing >> appears on serial. >> >> BDI is setting the rese

Re: [U-Boot] Problems booting without BDI

Hi Alemao, > I made a port of u-boot for my board, with MPC8343. > > The problem is that when i run u-boot with the BDI2000 (using "reset run" > command), u-boot loads normally, but when i take off the BDI nothing > appears on serial. > > BDI is setting the reset configuration word, and is the s