Re: [U-Boot] Ping command

Hi Wolfgang, Thanks , ping is working the problem was with routing of the Tx clock. Thanks & Reagrds, Smitha Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclus

Re: [U-Boot] Ping command

Hi Wolfgang, I solved the unknow device issue by enabling the CONFIG_ETHER_ON_FCC1 in my config. Will check the TX clock configuration. Currently getting the blow messages. It says using the FCC1 ETHERNET. ping 172.16.52.60 Trying FCC1 ETHERNET pram_ptr->fen_genfcc.fcc_rbase 03efcc88 pram_ptr->f

Re: [U-Boot] Ping command

Dear smitha.va...@wipro.com, please stop top posting/ full quoting. You can find hints here: http://www.netmeister.org/news/learn2quote.html In message <07acdfb8eca8ef47863a613bc01bbb22032bc...@hyd-mkd-mbx02.wipro.com> you wrote: > > I get the below messages. Its failing in the fec_send BD_ENE

Re: [U-Boot] Ping command

Hi Wolfgang Denk, I get the below messages. Its failing in the fec_send BD_ENET_TX_READY bit is not getting set. Any clue? EPN412> ping 172.16.52.20 Trying FCC1 ETHERNET pram_ptr->fen_genfcc.fcc_rbase 03efcc88 pram_ptr->fen_genfcc.fcc_tbase 03efcca8 Using FCC1 ETHERNET device sending ARP for ac10

Re: [U-Boot] Ping command

Dear smitha.va...@wipro.com, In message <07acdfb8eca8ef47863a613bc01bbb22032bc...@hyd-mkd-mbx02.wipro.com> you wrote: > > execute the PING > Command I get the following error > > >ping 172.16.52.20 > Using unknown device > ping failed; host 172.16.52.20 is not alive Check the source code and