On Tue, Aug 11, 2009 at 02:32:54AM +0400, Ilya Yanok wrote:
> Driver for NFC NAND controller found on Freescale's MX2 and MX3
> processors. Ported from Linux. Tested only with i.MX27 but should
> works with other MX2 and MX3 processors too.
>
> Signed-off-by: Ilya Yanok
Applied to u-boot-nand-fl
On Mon, Aug 03, 2009 at 05:45:14AM +0400, Ilya Yanok wrote:
> + if (this->options & NAND_BUSWIDTH_16) {
> + void __iomem *main_buf = host->regs->main_area0;
> + /* compress the ID info */
> + writeb(readb(main_buf + 2), main_buf + 1);
> + writeb(r
On Mon, Aug 03, 2009 at 06:01:03AM +0400, Ilya Yanok wrote:
> >> + return;
> >> + }
> >> +
> >> + if (chip == -1) {
> >> + writew(readw(&host->regs->nfc_config1) & ~NFC_CE,
> >> + &host->regs->nfc_config1);
> >> + return;
> >> + }
> >> +
> >> +
Hi Scott,
thanks for the review.
Scott Wood wrote:
>> +/* OOB placement block for use with hardware ecc generation */
>> +static struct nand_ecclayout nand_hw_eccoob = {
>> +.eccbytes = 5,
>> +.eccpos = {6, 7, 8, 9, 10},
>> +.oobfree = {{0, 5}, {11, 5}, }
>> +};
>> +
>> +#ifndef CONFI
On Fri, Jul 17, 2009 at 02:53:55PM +0400, Ilya Yanok wrote:
> +/* OOB placement block for use with hardware ecc generation */
> +static struct nand_ecclayout nand_hw_eccoob = {
> + .eccbytes = 5,
> + .eccpos = {6, 7, 8, 9, 10},
> + .oobfree = {{0, 5}, {11, 5}, }
> +};
> +
> +#ifndef CON
On 14:53 Fri 17 Jul , Ilya Yanok wrote:
> Driver for NFC NAND controller found on Freescale's MX2 and MX3
> processors. Ported from Linux. Tested only with i.MX27 but should
> works with other MX2 and MX3 processors too.
>
> Signed-off-by: Ilya Yanok
> ---
> drivers/mtd/nand/Makefile |
6 matches
Mail list logo
