Hi Alex,
> > Also I recommend to print the master clock in MHz, and to print the master
> > clock name/label from ccf driver:
> > https://github.com/u-boot/u-boot/blob/master/drivers/clk/at91/sama7g5.
> > c#L410
>
> Should be possible. I could do this and send a v2?
>
> Yes Please 😊
>
Hello everyone,
Am Mon, Mar 18, 2024 at 11:15:18AM + schrieb mihai.s...@microchip.com:
>
> > The command is very useful.
> > I would like to have also the ONFI timing mode printed for nand-flash
> > 😊
>
> As far as I can see the ac
Hi Alexander,
> Maybe we should add an automatic fallback for timing mode in
> nand-controller.c 😊
> As of now the driver is forcing tRC_min to 30ns (mode 3), which is not
> reliable for sama7 nfc controller ☹
>
> https://github.com/u-boot/u-boot/blob/master/drivers/mtd/nand/r
Hello Mihai,
Am Mon, Mar 18, 2024 at 11:28:39AM + schrieb mihai.s...@microchip.com:
> Hi Alexander,
>
> I'm sorry for quoting because the email is sent from Outlook ☹
>
> > > U-Boot> nand info
> > >
> > > Device 0: nand0, sector size 256 KiB
> > > Manufacturer MACRONIX
> > > Model
Hi Alexander,
I'm sorry for quoting because the email is sent from Outlook ☹
> > U-Boot> nand info
> >
> > Device 0: nand0, sector size 256 KiB
> > Manufacturer MACRONIX
> > Model MX30LF4G28AD
> > Device size512 MiB
> > Page size 4096 b
> > OOB size 25
Hello Mihai,
Am Mon, Mar 18, 2024 at 09:07:09AM + schrieb mihai.s...@microchip.com:
> > U-Boot> nand info
> >
> > Device 0: nand0, sector size 256 KiB
> > Manufacturer MACRONIX
> > Model MX30LF4G28AD
> > Device size512 MiB
> > Page size 4096 b
> > OOB size
> The command is very useful.
> I would like to have also the ONFI timing mode printed for nand-flash
> 😊
As far as I can see the actually set mode is not stored anywhere. One could
print it after it was successfully set, but that wou
Hello Mihai,
Am Mon, Mar 18, 2024 at 09:15:29AM + schrieb mihai.s...@microchip.com:
> > Hi Alexander,
> >
> > I tested your work on sama7g54-curiosity board:
> >
> > U-Boot> nand info
> >
> > Device 0: nand0, sector size 256 KiB
> > Manufacturer MACRONIX
> > Model MX30LF4G28AD
> >
> Hi Alexander,
>
> I tested your work on sama7g54-curiosity board:
>
> U-Boot> nand info
>
> Device 0: nand0, sector size 256 KiB
> Manufacturer MACRONIX
> Model MX30LF4G28AD
> Device size512 MiB
> Page size 4096 b
> OOB size 256 b
> Erase size 2
> U-Boot> nand info
>
> Device 0: nand0, sector size 256 KiB
> Manufacturer MACRONIX
> Model MX30LF4G28AD
> Device size512 MiB
> Page size 4096 b
> OOB size 256 b
> Erase size 262144 b
> ecc strength 8 bits
> ecc step size 512 b
>
Hello Mihai,
Am Mon, Mar 18, 2024 at 08:09:00AM + schrieb mihai.s...@microchip.com:
> On 3/7/24 11:10, Alexander Dahl wrote:
> > For now adds one new command 'hsmc' with a single subcommand 'decode'
> > to read and display the content of the registers of the Static Memory
> > Controllers (SM
On 3/18/24 10:09, mihai.s...@microchip.com wrote:
> On 3/7/24 11:10, Alexander Dahl wrote:
>> For now adds one new command 'hsmc' with a single subcommand 'decode'
>> to read and display the content of the registers of the Static Memory
>> Controllers (SMC/HSMC) found in different at91 SoCs. Nee
On 3/7/24 11:10, Alexander Dahl wrote:
> For now adds one new command 'hsmc' with a single subcommand 'decode'
> to read and display the content of the registers of the Static Memory
> Controllers (SMC/HSMC) found in different at91 SoCs. Needed to get a
> better picture on what raw nand core an
On 3/7/24 11:10, Alexander Dahl wrote:
> For now adds one new command 'hsmc' with a single subcommand 'decode' to
> read and display the content of the registers of the Static Memory
> Controllers (SMC/HSMC) found in different at91 SoCs. Needed to get a
> better picture on what raw nand core and a
14 matches
Mail list logo
