Re: [U-Boot] u-boot for BMW board

2008-09-04 Thread Ramji PanchaReddy
hi Wolfgang, i used BMW configuration and now o/p is U-Boot 1.1.6 (Sep 3 2008 - 21:48:59) CPU: MPC8245 Revision 1.2 at 198 MHz: 16 kB I-Cache 16 kB D-Cache Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B) Built: Sep 3 2008 at 21:48:59 Local Bus at 99 MHz DRAM: 64 MB FLASH: *** failed *** ### ERROR

Re: [U-Boot] u-boot for BMW board

2008-09-03 Thread John W. Linville
On Wed, Sep 03, 2008 at 08:44:37PM +0530, Ramji PanchaReddy wrote: > Hi Wolfgang, > Thanks a lot for your response .. > > I also tried BMW_config and used cross-compiler as ppc_82xx-* .When i load > this i did not get any thing on console. > My processor is MPC8245. >From what I recall about BMW,

Re: [U-Boot] u-boot for BMW board

2008-09-03 Thread Ramji PanchaReddy
Hi Wolfgang, Thanks a lot for your response .. I also tried BMW_config and used cross-compiler as ppc_82xx-* .When i load this i did not get any thing on console. My processor is MPC8245. Regards, Ramji On Wed, Sep 3, 2008 at 8:29 PM, Wolfgang Denk <[EMAIL PROTECTED]> wrote: > Dear Ramji Panc

Re: [U-Boot] u-boot for BMW board

2008-09-03 Thread Wolfgang Denk
Dear Ramji PanchaReddy, in message <[EMAIL PROTECTED]> you wrote: > > I am using BMW board. > i used Sandpoint8245_config for board configuration based on the CPU > when i load the u-boot.bin i got following o/p ... > FLASH: *** failed *** > ### ERROR ### Please RESET the board ### Well, what di

[U-Boot] u-boot for BMW board

2008-09-03 Thread Ramji PanchaReddy
This is Ramji from A.P ,India.I am new to u-boot. I am using BMW board. i used Sandpoint8245_config for board configuration based on the CPU when i load the u-boot.bin i got following o/p ++ U-Boot 1.1.6 (Sep 2 2008 - 20:22:29) CPU: MPC8245 Revision 1.2 at 166.