Hi Rahanesh,
>> Well, that most certainly means that your /dev/mtd0 is not a NOR or
>> NAND flash device.
>>
>>
>Now used the fw_printenv under tools/env directory of uboot. It
> does not have IOCTL error.
>
> On issuing a fw_printenv it showd following messages
>
>
Hi Wolfgang,
> Well, that most certainly means that your /dev/mtd0 is not a NOR or
> NAND flash device.
>
>
Now used the fw_printenv under tools/env directory of uboot. It
does not have IOCTL error.
On issuing a fw_printenv it showd following messages
Bad data C
Dear Wolfgang,
> Well, that most certainly means that your /dev/mtd0 is not a NOR or
> NAND flash device.
>
I use mtd_debug utility to identify the /dev/mtd0 device. It said
it is Nor flash.
Thanks
Rahanesh
___
U-Boot mailing list
U-Boot@li
Dear Rahanesh,
please do not top post / full quote. Please make sure to read
http://www.netmeister.org/news/learn2quote.html
In message <4ab0e9c3.10...@tataelxsi.co.in> you wrote:
>
> Cannot get MTD information: Inappropriate ioctl for device got printed
Well, that most certainly means that yo
Hi Wolfgang
Cannot get MTD information: Inappropriate ioctl for device got printed
Thanks
Rahanesh
Wolfgang Denk wrote:
> Dear Rahanesh,
>
> In message <4ab0dfca.4040...@tataelxsi.co.in> you wrote:
>
>> When i executed fw_printenv on an embedded board , it threw an error
>>
>>
>> IOCTL err
Dear Rahanesh,
In message <4ab0dfca.4040...@tataelxsi.co.in> you wrote:
>
> When i executed fw_printenv on an embedded board , it threw an error
>
>
> IOCTL error : Cannot get MTD information!! Any idea why this error
> occurred?
Well, looking in the source code, I see a single place with
Hi All,
When i executed fw_printenv on an embedded board , it threw an error
IOCTL error : Cannot get MTD information!! Any idea why this error
occurred?
The contents of config file which i used shown below
# MTD device name Device offset Env. size Flash sector size
Number of
7 matches
Mail list logo
