[sorry, message has been cut]
Could this be a timing issue ? I don't see much timing in ep82xxm code for
example. Or perhaps the MRW configuration is not enough to correctly
configure burst mode ? (Of course I'm also new in SDRAM init...)
Thanks for ELDK and U-Boot, they are really great.
Best
U-Boot 1.3.4 (Sep 12 2008 - 19:16:33)
MPC8270 Reset Status: External Soft, External Hard
MPC8270 Clock Configuration
- Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq 20-60 , Core Freq 100-300
- dfbrg 0, corecnf 0x1b, busdf 6, cpmdf 1, plldf 0, pllmf 6, pcidf 3
- vco_out 583331000, s
Ok, I made some progress.
I realized that my debugger was not correctly initialized and was preventing
accurate stepping. So if you use a Lauterbach with Trace32 and MPC8270,
it seems that you have to reset OR11 & BR11 to 0 in the init script (FYI).
Anyway, I have set my board configuration with
Hi,
I try to port U-Boot 1.3.4 on a custom MPC8270 card.
I'm very new to PowerPC and U-Boot, I'm therefore a little
lost in the huge set of documentation and most likely have
silly questions.
My board has the following main characteristics:
- 128 MB SDRAM
- 32 MB Flash (4xAM29LV641) mapped at 0xF
4 matches
Mail list logo
