On 2017-09-11 07:15, Vincent Prince wrote:
> Hi Stefan,
>
> It was probably a Windows bug as it is almost working now.
Yeah with Windows the multiple re-enumeration is sometimes a bit
strange, it leads to rather long running driver search on first connect.
> I was wondering why sdp command is ex
Hi Stefan,
It was probably a Windows bug as it is almost working now.
I was wondering why sdp command is expecting a jump ?
Is it necessary to jump after USB transfer, or we should download
anything we want and jump if asked ?
Regards,
Vincent
2017-09-08 18:37 GMT+02:00 Stefan Agner :
> Hi Vinc
Hi Vincent,
On 2017-09-08 01:27, Vincent Prince wrote:
> Hi everyone,
>
> I managed to get SDP protocol to work with on my custom i.MX6 board,
> so big thanks to Stefan for your work!
>
> I'm now trying to load swupdate ramdisk with u-boot sdp command,
> without success.
> Is it a possible use c
Hi everyone,
I managed to get SDP protocol to work with on my custom i.MX6 board,
so big thanks to Stefan for your work!
I'm now trying to load swupdate ramdisk with u-boot sdp command,
without success.
Is it a possible use case ?
Here my steps:
In u-boot:
=> sdp 0
On Host,
$ imx_usb
config f
On September 1, 2017 12:25:44 PM PDT, Fabio Estevam wrote:
>On Fri, Sep 1, 2017 at 3:54 PM, Fabio Estevam
>wrote:
>
>> I have tested this method and it works, thanks.
>>
>> Do you plan to usptream this method?
>
>Or I can also put your patch as part of my series that adds SDP
>support for imx6q
On Fri, Sep 1, 2017 at 3:54 PM, Fabio Estevam wrote:
> I have tested this method and it works, thanks.
>
> Do you plan to usptream this method?
Or I can also put your patch as part of my series that adds SDP
support for imx6qsabresd if you prefer.
___
Hi Stefan,
On Fri, Sep 1, 2017 at 3:19 PM, Stefan Agner wrote:
> That is the issue I am describing here:
> https://lists.denx.de/pipermail/u-boot/2017-August/301952.html
>
> Either enter recovery mode explicitly (by setting the BMODE pins or
> using the bmode command)
On imx6qsabresd it is not
On 2017-09-01 09:48, Fabio Estevam wrote:
> Hi Stefan,
>
> On Wed, Aug 16, 2017 at 3:00 PM, Stefan Agner wrote:
>> From: Stefan Agner
>>
>> This series adds NXP's Serial Download Protocol (SDP) support via
>> USB for SPL/U-Boot. It allows to download U-Boot via USB from a
>> (recovered) SPL usin
Hi Stefan,
On Wed, Aug 16, 2017 at 3:00 PM, Stefan Agner wrote:
> From: Stefan Agner
>
> This series adds NXP's Serial Download Protocol (SDP) support via
> USB for SPL/U-Boot. It allows to download U-Boot via USB from a
> (recovered) SPL using the same tools used to download SPL itself
> (speci
On Wed, Aug 23, 2017 at 5:43 AM, Stefano Babic wrote:
> I have merged the whole series to u-boot-imx. Many thanks for your
> effort, this was in the TODO list for i.MX since a long time !
Yes, very nice job, Stefan!
I will be using it soon on mx6sabresd, thanks!
Hi Stefan,
On 16/08/2017 20:00, Stefan Agner wrote:
> From: Stefan Agner
>
> This series adds NXP's Serial Download Protocol (SDP) support via
> USB for SPL/U-Boot. It allows to download U-Boot via USB from a
> (recovered) SPL using the same tools used to download SPL itself
> (specifically imx_
From: Stefan Agner
This series adds NXP's Serial Download Protocol (SDP) support via
USB for SPL/U-Boot. It allows to download U-Boot via USB from a
(recovered) SPL using the same tools used to download SPL itself
(specifically imx_usb, but also sb_loader seems to work).
The idea has been brough
12 matches
Mail list logo
