Hi Fabio,
On 31.05.2012 19:24, Fabio Estevam wrote:
Add splaschscreen support.
It was used a Hannstar 1024 x 768 LVDS panel that can be connected to the
mx6qsabrelite board.
Signed-off-by: Fabio Estevam
---
I understand this patch will need to be improved, but I am posting it now, so
that o
On Sat, Jun 2, 2012 at 9:12 PM, Troy Kisky
wrote:
> If 0x1f is the Hannstar LVDS address, then you definitely should NOT use
> 0x1f for the
>
> CONFIG_SYS_I2C_SLAVE value.
>
>
> CONFIG_SYS_I2C_SLAVE is meant to define which address the processor will
> respond to
> in a multi-master bus environme
On 6/2/2012 3:36 PM, Fabio Estevam wrote:
Hi Dirk,
On Sat, Jun 2, 2012 at 3:52 PM, Dirk Behme wrote:
Maybe you could check [1]
-#define CONFIG_SYS_I2C_SLAVE0xfe
+#define CONFIG_SYS_I2C_SLAVE0x1f
then? I'm no I2C expert and I wasn't sure what to use for
CONFIG_SYS_I2C_SLAVE.
Hi Dirk,
On Sat, Jun 2, 2012 at 3:52 PM, Dirk Behme wrote:
> Maybe you could check [1]
>
> -#define CONFIG_SYS_I2C_SLAVE 0xfe
> +#define CONFIG_SYS_I2C_SLAVE 0x1f
>
> then? I'm no I2C expert and I wasn't sure what to use for
> CONFIG_SYS_I2C_SLAVE.
Yes, 0x1f is the correct address
On 02.06.2012 20:22, Fabio Estevam wrote:
Hi Dirk,
On Sat, Jun 2, 2012 at 3:46 AM, Dirk Behme wrote:
On 31.05.2012 19:24, Fabio Estevam wrote:
Add splaschscreen support.
Here and in the subject a typo? splaschscreen -> splashscreen?
Thanks, I will fix this and rework this patch accordi
Hi Dirk,
On Sat, Jun 2, 2012 at 3:46 AM, Dirk Behme wrote:
> On 31.05.2012 19:24, Fabio Estevam wrote:
>>
>> Add splaschscreen support.
>
>
> Here and in the subject a typo? splaschscreen -> splashscreen?
Thanks, I will fix this and rework this patch according to your I2C suggestion.
Regards,
On 31.05.2012 19:24, Fabio Estevam wrote:
Add splaschscreen support.
Here and in the subject a typo? splaschscreen -> splashscreen?
Best regards
Dirk
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Add splaschscreen support.
It was used a Hannstar 1024 x 768 LVDS panel that can be connected to the
mx6qsabrelite board.
Signed-off-by: Fabio Estevam
---
I understand this patch will need to be improved, but I am posting it now, so
that others
can possibly test it.
board/freescale/mx6qsabre
8 matches
Mail list logo