On Tue, Aug 11, 2009 at 02:32:54AM +0400, Ilya Yanok wrote:
> Driver for NFC NAND controller found on Freescale's MX2 and MX3
> processors. Ported from Linux. Tested only with i.MX27 but should
> works with other MX2 and MX3 processors too.
>
> Signed-off-by: Ilya Yanok
Applied to u-boot-nand-fl
Driver for NFC NAND controller found on Freescale's MX2 and MX3
processors. Ported from Linux. Tested only with i.MX27 but should
works with other MX2 and MX3 processors too.
Signed-off-by: Ilya Yanok
---
drivers/mtd/nand/Makefile |1 +
drivers/mtd/nand/mxc_nand.c | 880 ++
On Mon, Aug 03, 2009 at 05:45:14AM +0400, Ilya Yanok wrote:
> + if (this->options & NAND_BUSWIDTH_16) {
> + void __iomem *main_buf = host->regs->main_area0;
> + /* compress the ID info */
> + writeb(readb(main_buf + 2), main_buf + 1);
> + writeb(r
On Mon, Aug 03, 2009 at 06:01:03AM +0400, Ilya Yanok wrote:
> >> + return;
> >> + }
> >> +
> >> + if (chip == -1) {
> >> + writew(readw(&host->regs->nfc_config1) & ~NFC_CE,
> >> + &host->regs->nfc_config1);
> >> + return;
> >> + }
> >> +
> >> +
Hi Scott,
thanks for the review.
Scott Wood wrote:
>> +/* OOB placement block for use with hardware ecc generation */
>> +static struct nand_ecclayout nand_hw_eccoob = {
>> +.eccbytes = 5,
>> +.eccpos = {6, 7, 8, 9, 10},
>> +.oobfree = {{0, 5}, {11, 5}, }
>> +};
>> +
>> +#ifndef CONFI
Driver for NFC NAND controller found on Freescale's MX2 and MX3
processors. Ported from Linux. Tested only with i.MX27 but should
works with other MX2 and MX3 processors too.
Signed-off-by: Ilya Yanok
---
drivers/mtd/nand/Makefile |1 +
drivers/mtd/nand/mxc_nand.c | 902 ++
On Fri, Jul 17, 2009 at 02:53:55PM +0400, Ilya Yanok wrote:
> +/* OOB placement block for use with hardware ecc generation */
> +static struct nand_ecclayout nand_hw_eccoob = {
> + .eccbytes = 5,
> + .eccpos = {6, 7, 8, 9, 10},
> + .oobfree = {{0, 5}, {11, 5}, }
> +};
> +
> +#ifndef CON
On 14:53 Fri 17 Jul , Ilya Yanok wrote:
> Driver for NFC NAND controller found on Freescale's MX2 and MX3
> processors. Ported from Linux. Tested only with i.MX27 but should
> works with other MX2 and MX3 processors too.
>
> Signed-off-by: Ilya Yanok
> ---
> drivers/mtd/nand/Makefile |
Driver for NFC NAND controller found on Freescale's MX2 and MX3
processors. Ported from Linux. Tested only with i.MX27 but should
works with other MX2 and MX3 processors too.
Signed-off-by: Ilya Yanok
---
drivers/mtd/nand/Makefile |1 +
drivers/mtd/nand/mxc_nand.c | 902 ++
9 matches
Mail list logo
